?Industrial boiler
o DZL series boiler
1)DZL Quick Installation hot-water boiler
2)DZL soft coal hot-water boiler
3)DZL soft coal steam boiler
4)DZL series blind coal steam boiler
5)DZL series blind coal hot-water boiler
o SZL series boiler
1) SZL Shop-assembled Series hot-water Boiler
2) SZL Shop-assembled Series steam Boiler
3) SZL Water-tube Packed Series hot-water Boiler
4)SZL Water-tube Packed Series steam Boiler
o Oil and Gas Series Boilers
1)SZS series boiler
2)Noviter-NSTB steam boiler
3)Noviter-NWT hot water boiler
4)Noviter-NST steam boiler
5)Noviter-NWTB hot water boiler
o SHL series bulk boiler
1) SHL series bulk boiler
2) SHL series field-assembled boiler
o Organic Heat Carrier Boiler
1)Organic Heat Carrier Boiler
2)Special Boiler
o SZW reciprocating grate boiler
o Pulverized coal
1)Efficient pulverized coal steam boiler
2)Efficient pulverized coal hot-water boiler
?Power plant boiler
o Circulating fluidized bed hot-water boiler
o Biomass Boiler
?Waste heat boiler
o Catalytic cracking exhaust heat boiler
o Blow air waste heat boiler
o Acid-making waste heat boiler
o Cement kiln exhaust heat boiler
o Dry quenching exhaust heat boiler
o Sintering machine ring cold (with cold)
o Gas turbine exhaust heat boiler
o Sponge iron exhaust heat boiler
o Converter waste heat boiler
o Coking waste heat boiler
?Boiler auxiliary machine
o DCS control system
1)Electrically heated boiler
2)
o Water treatment device
o DCS control system
o Slag remover
o Coal feeder
o Deaerator
o Heat transfer device
o Water treatment device
?Pressure container
o Stainless steel containerSteel containerSteam autoclaveStorage containersThe reaction
containersTower-type containers Steel silo
?Heat exchanger
o Spire plate heat exchengerPlate heat exchangerPipe type heat exchanger Generator
?Transformer
?Steel
o Boiler tubeOil casing, tubing, line pipePipeBoiler board Hardware tool
o Pliers
o Spanners
o Hammers
o Set tools
工业锅炉 >> DZL系列锅炉Industrial boiler >> DZL series boiler
?DZL快装热水锅炉DZL Quick Installation hot-water boiler DZL系列锅炉产品特点：
1、采用高效传热元件—螺纹烟管，配以合理的烟气流速，使锅炉热效率比国家专业标准高6-8个百分点。
2、拱形管板、螺纹烟管使锅壳由准刚性体变为准弹性体，配合翼型烟道，完全避免了传统烟火管锅炉高温
管板开裂的弊病。
3、合理的水循环回路及独特的回水引射装置（热水锅炉），提高了上升管水速，避免了水冷壁爆管。
4、采用炉内烟尘惯性分离，辅以高效多管除尘器，使锅炉排尘浓度满足一类地区要求。
5、合理的锅炉结构不需要钢架就能支撑起自身重量。
6、采用节能、强辐射炉拱，能保证燃料的稳定燃烧。
7、采用高标准、高质量的辅机、附件和自动控制设备，保证锅炉安全、稳定运行，同时降低司炉工的劳动
强度。
8、结构紧凑，1-20t/h(0.7-14MW)锅炉均可单层布置。
Features of the DZL series boiler：
1、 the usage of high-performance heat transfer components - threaded pipe, with a reasonable
gas flow rate, the boiler thermal efficiency is higher 6-8 percentage points than the state high professional standards.
2、arch tube plate, thread to make pot pipe from the quasi-rigid body shell variable based elastomer
with the airfoil stack, completely avoid the defects that traditional high-temperature
pyrotechnic tube boiler tube plate cracking.
3、reasonable and unique water circulation loop backwater ejector device (hot water boiler), improved the increased water velocity, to avoid the water-wall tube break.
4、the usage of inertial separation of dust furnace, supplemented by high-performance
multi-collector, so that the concentration of dust emission boiler to meet the demand for a class.
5、reasonable structure of the boiler does not need a steel frame can support the weight of its own.
6、the usage of energy, strong radiation furnace arch, can guarantee the stability of fuel combustion.
7、the usage of a high standard, high-quality auxiliary equipment, accessories and automatic control equipment, boiler guarantee security, stability operations, while reducing the labor intensity Boiler Operators.
8、the structure is compact , the boiler1-20t / h (0.7-14MW) can be single-layer arrangement.
DZL烟煤热水锅炉DZL soft coal hot-water boiler
新型DZL水火管锅壳式锅炉特点简介（1～20t/h和0.7～14MW锅炉）
1、合理布置受热面及燃烧装置，锅炉热效率比国家标准高出4~5个百分点。
2、合理的烟速设计，受热面不积灰、不磨损，锅炉受热面在不吹灰的条件下，可长期保持高效、满负荷、安全运行。
3、高大炉膛易于根据不同燃料设计合理炉拱，提高燃料的燃烬度及消除黑烟。
4、全部独立回路设计，对于热水锅炉还采用合理的引射循环，受热面回路内介质流速高于国家标准要求。
5、采用高强度大块炉排片，对于大型炉排加装滚轮装置，提高炉排的安全性，同时该炉排漏煤少、燃烧调整方便。
6、炉膛出口烟尘惯性分离，有效降低排烟含尘浓度及减少对后部受热面的磨损。
7、结构紧凑，安装体积比同容量的其它型式锅炉小，缩短安装周期及降低锅炉房造价。
8、水容积大，利于停电保护，适应负荷变化能力强。
新型DZL水火管锅壳式锅炉特点简介（大于20t/h和14MW的锅炉）
1、合理布置受热面及燃烧装置，锅炉热效率比国家标准高出4~5个百分点。
2、合理的烟速设计，受热面不积灰、不磨损，锅炉受热面在不吹灰的条件下，可长期保持高效、满负荷、安全运行。
3、高大炉膛易于根据不同燃料设计合理炉拱，提高燃料的燃烬度及消除黑烟。
4、全部独立回路设计，对于热水锅炉还采用合理的引射循环，受热面回路内介质流速高于国家标准要求。
5、采用鳞片式或横梁式链条炉排，漏煤少、燃烧调整方便。
6、炉膛出口烟尘惯性分离，有效降低排烟含尘浓度及减少对后部受热面的磨损。
7、结构紧凑，安装高度比同容量的其它型式锅炉可降低3～5m，缩短安装周期及降低锅炉房造价。
8、密闭式清灰，避免二次污染，可省时、省力。
9、水容积大，利于停电保护，适应负荷变化能力强。
Features of the DZL series boiler
1、the usage of high-performance heat transfer components - threaded pipe, with a reasonable gas flow rate, the boiler thermal efficiency is higher 6-8 percentage points than the state high professional standards.
2、arch tube plate, thread to make pot pipe from the quasi-rigid body shell variable based elastomer with the airfoil stack, completely avoid the defects that traditional high-temperature pyrotechnic tube boiler tube plate cracking.
3、reasonable and unique water circulation loop backwater ejector device (hot water boiler), improved the increased water velocity, to avoid the water-wall tube break.
4、the usage of inertial separation of dust furnace, supplemented by high-performance
multi-collector, so that the concentration of dust emission boiler to meet the demand for a class.
5、reasonable structure of the boiler does not need a steel frame can support the weight of its own.
6、the usage of energy, strong radiation furnace arch, can guarantee the stability of fuel combustion.
7、the usage of a high standard, high-quality auxiliary equipment, accessories and automatic control equipment, boiler guarantee security, stability operations, while reducing the labor intensity Boiler Operators.
8、the structure is compact , the boiler1-20t / h (0.7-14MW) can be single-layer arrangement.
?
?DZL烟煤蒸汽锅炉DZL soft coal steam boiler
Features of the DZL series boiler
1、the usage of high-performance heat transfer components - threaded pipe, with a reasonable
gas flow rate, the boiler thermal efficiency is higher 6-8 percentage points than the state high professional standards.
2、arch tube plate, thread to make pot pipe from the quasi-rigid body shell variable based
elastomer with the airfoil stack, completely avoid the defects that traditional high-temperature pyrotechnic tube boiler tube plate cracking.
3、reasonable and unique water circulation loop backwater ejector device (hot water boiler),
improved the increased water velocity, to avoid the water-wall tube break.
4、the usage of inertial separation of dust furnace, supplemented by high-performance
multi-collector, so that the concentration of dust emission boiler to meet the demand for a class.
5、reasonable structure of the boiler does not need a steel frame can support the weight of its
own.
6、the usage of energy, strong radiation furnace arch, can guarantee the stability of fuel
combustion.
7、the usage of a high standard, high-quality auxiliary equipment, accessories and automatic
control equipment, boiler guarantee security, stability operations, while reducing the labor
intensity Boiler Operators.
8、the structure is compact , the boiler1-20t / h (0.7-14MW) can be single-layer arrangement.
?
?DZL无烟煤蒸汽锅炉DZL series blind coal steam boiler
Features of the DZL series boiler
1、the usage of high-performance heat transfer components - threaded pipe, with a reasonable
gas flow rate, the boiler thermal efficiency is higher 6-8 percentage points than the state high professional standards.
2、arch tube plate, thread to make pot pipe from the quasi-rigid body shell variable based
elastomer with the airfoil stack, completely avoid the defects that traditional high-temperature pyrotechnic tube boiler tube plate cracking.
3、reasonable and unique water circulation loop backwater ejector device (hot water boiler),
improved the increased water velocity, to avoid the water-wall tube break.
4、the usage of inertial separation of dust furnace, supplemented by high-performance
multi-collector, so that the concentration of dust emission boiler to meet the demand for a class.
5、reasonable structure of the boiler does not need a steel frame can support the weight of its
own. 6、the usage of energy, strong radiation furnace arch, can guarantee the stability of fuel combustion.
7、the usage of a high standard, high-quality auxiliary equipment, accessories and automatic
control equipment, boiler guarantee security, stability operations, while reducing the labor
intensity Boiler Operators.
8、the structure is compact , the boiler1-20t / h (0.7-14MW) can be single-layer arrangement.
蒸汽锅炉：有1t/h、2 t/h、4t/h 、6t/h、8t/h、10t/h、12t/h、15t/h、20t/h、25t/h、30t/h、35t/h、40t/h、44t/h等吨位,额定蒸汽压力有0.7 MPa、1.25 MPa、1.6MPa三种，蒸汽可为饱和蒸汽也可为过热蒸汽，出厂形式：1~6 t/h为快装，6~10 t/h为组装， 15~30 t/h为半组装，35~44 t/h为散装。
DZL蒸汽型无烟煤系列
额定蒸发量t/h 1 1 2 2 4 4
6 10
额定蒸汽温度℃170.41 184.07 170.41 184.07 170.41 184.07 193.3
193.3 对流受热面积m2 19.88 19.88 39.23 39.23 87.66 87.66 162.249
203.58 炉排有效面积m2 1.82 1.82 3.15 3.15 5.18 5.18
7.643 13.9
排烟温度℃175.7 182.4 164.1 172.3 148.5 157.3
149.2 148.2 耗煤量Kg/h 145.4 147.2 290.5 294.1 575.3 582.8 720.7
78.12
最大运输件尺寸mm
5488×1764
×3280 5488×1764
×3280
5694×2550
×3364
5694×2550
×3364
6740×2470
×3550
6740×2470
×3550
7100×2800
×3550
7600×3200×
3500
7300×25407700×2200×
×2330 2330
锅炉安装外形尺寸mm 5488×3200×4203
5488×3200×4203
5694×3803×4833
5694×3803×
4833
6740×3570×5013
6740×3570×5013
8000×5200×6000
8430×6000×
6500
出厂方式
快装
组装
?
?
DZL 无烟煤热水锅炉DZL series blind coal hot-water boiler
1、 the usage of high-performance heat transfer components - threaded pipe, with a reasonable gas flow rate, the boiler thermal efficiency is higher 6-8 percentage points than the state high professional standards.
2、arch tube plate, thread to make pot pipe from the quasi-rigid body shell variable based elastomer with the airfoil stack, completely avoid the defects that traditional high-temperature pyrotechnic tube boiler tube plate cracking.
3、reasonable and unique water circulation loop backwater ejector device (hot water boiler), improved the increased water velocity, to avoid the water-wall tube break.
4、the usage of inertial separation of dust furnace, supplemented by high-performance
multi-collector, so that the concentration of dust emission boiler to meet the demand for a class. 5、reasonable structure of the boiler does not need a steel frame can support the weight of its own. 6、the usage of energy, strong radiation furnace arch, can guarantee the stability of fuel combustion.
7、the usage of a high standard, high-quality auxiliary equipment, accessories and automatic control equipment, boiler guarantee security, stability operations, while reducing the labor intensity Boiler Operators.
8、the structure is compact , the boiler1-20t / h (0.7-14MW) can be single-layer arrangement. 热水锅炉：有0.7MW 、1.4MW 、2.8MW 、4.2MW 、5.6MW 、7MW 、10.5MW 、14MW 、29MW 、46MW 、58MW 等热功率，工作压力有0.7MPa 、1.0MPa 、1.25MPa 、1.6MPa 四种，进出口水温为95/70，115/70，130/70，150/70，出厂形式：0.7~4.2 MW 为快装，4.2~7 MW 为组装，10.5~14MW 为半组装，29 ~58MW 为散装。 DZL 热水型无烟煤系列
锅炉
型号 DZL0.7-0.7/95/70-W D ZL1.4-0.7/95/70-W DZL2.8-1.0/115/70-W DZL2.8-0.7/95/70-W DZL4.2-1.0/95/70-W DZL4.2-1.0/115/70-W DZL10.5-1.0/95/70-W 额定热功率MW 0.7 1.4 2.8 2.8 4.2 4.2 10.5
额定出水
压力MPa
0.7
0.7 1.0 0.7 1.0 1.0 1.0
进水
温
度℃
70 70 70 70 70 70 70
额定
出水
温
度℃
95 95 115 95 95 115 95
辐射
受热
面积
m2
3.24 5.86 7.24 7.24 15.8 15.8 27.22
对流
受热
面积
m2
19.664 36.07 71.71 71.71 124.71 124.71 262.2
预热
器受
热面
积m2
5.86 10.98 20.5 20.5 35.868 35.868 11
6.1
炉排
面积
m2
1.582 3.15 5.18 5.18 8.363 8.363 20.8
适用
煤种
W W W W W W W
排烟
温
度℃
139.6 154.2 155.7 140.5 128 135.4 142
设计
热效
率%
75.77 75.33 74.84 75.72 77.76 76.36 83.07
耗煤
量
Kg/h
136.4 274.3 552.2 545.8 797.2 811.8 1866.8
最大
运输
件重
量t
14.87 15.294 24.71 24.71 35.45 35.45 14.2/24 最大
运输件尺寸mm 5488×1746×
2833
5658×2200×3262 6743×2470×3550
6743×2470×
3550
7800×2950×
3550
7800×2950×3550
6647×3373×
3403/ 9439
×3768×1100
锅炉安装5488×3200×
4203
5658×3628×4731 6743×3570×4980
6743×3570×
4980
7800×5270×
4970
7800×5270×4970 9869×5328×7952
尺寸
mm
出厂
方式
注：以上设计燃料低位发热值24395KJ/kg
工业锅炉 >> SZL系列锅炉SZL series boiler
?
组装SZL系列热水锅炉 SZL Shop-assembled Series hot-water Boiler
Characteristics of SZL series boiler product performance
1、double drum longitudinal home-style layout, the structure of the whole assembly, the overall compact,
shorter installation cycle, the boiler room area of savings, reduce capital investment.
2、heating surface arrangement of the full, effective insulation, high thermal efficiency of boilers.
3、both to the wind, an independent wind room, with the wind evenly, easy adjustment.
4、the use of momentum Boiler arch design, high combustion efficiency
5、the use of new high-intensity large grate tablets to reduce the leakage of coal, to avoid fracture grate
film.
6、boiler control, the protection functions to ensure the boiler safe, stable and highly efficient
operation.
7、allocation of new high-performance auxiliary to reduce boiler power consumption and improve the
reliability of boiler operation.
?
?组装SZL系列蒸汽锅炉SZL Shop-assembled Series steam Boiler
该系列锅炉采用上、下两大件现场组装、A型布置结构。上部大件为本体结构，下部大件为燃烧设备（链条炉排）。现场筑砌完下部炉墙后，上、下两大部件合陇即可完成锅炉主机的安装。安装较为简便，锅炉单层布置，结构紧凑，整体性能较好。其主要特点如下:
1、水循环回路：锅炉整体水循环回路简单、清晰，特别是水冷壁管每个回路都有单独的集箱及下降管，保
证了对回路的可靠供水，且水循环回路高度较大，对蒸汽、热水锅炉都能形成充足的水循环动力，保证锅炉的安全运行。
2、炉膛空间大，燃料的适应性及燃烬度较高，可满足烟煤、无烟煤及贫煤的稳定燃烧。
3、采用大块炉排片及炉排片下加滚轮装置，在提高炉排片强度的同时，有效改进炉排片的受力情况，提高
了炉排运行的安全性。
4、大块炉排片炉排漏煤少，燃料利用率高。
5、采用双侧进风及单独风室、单独调节结构，调节灵活、方便，火床平稳，运行可靠。
6、自动化程度实现给水、上煤、炉排、风机等运转的自动控制，同时锅炉超压（超温）、水位（热水锅炉
无）同炉排、风机运转的联大锁保护，同时配备优质的辅机、附件，保证锅炉的安全、经济、高效运行。
7、锅炉的水容积较大，有很强的负荷调整能力。
Characteristics of SZL series boiler product performance
1、double drum longitudinal home-style layout, the structure of the whole assembly, the overall compact,
shorter installation cycle, the boiler room area of savings, reduce capital investment.
2、heating surface arrangement of the full, effective insulation, high thermal efficiency of boilers.
3、both to the wind, an independent wind room, with the wind evenly, easy adjustment.
4、the use of momentum Boiler arch design, high combustion efficiency
5、the use of new high-intensity large grate tablets to reduce the leakage of coal, to avoid fracture grate
film.
6、boiler control, the protection functions to ensure the boiler safe, stable and highly efficient
operation.
7、allocation of new high-performance auxiliary to reduce boiler power consumption and improve the
reliability of boiler operation.
?
?SZL新型水管热水锅炉SZL Water-tube Packed Series hot-water Boiler Characteristics of group SZL series boiler product performance
1、double drum longitudinal home-style layout, the structure of the whole assembly, the overall
compact, shorter installation cycle, the boiler room area of savings, reduce capital investment.
2、heating surface arrangement of the full, effective insulation, high thermal efficiency of
boilers.
3、both to the wind, an independent wind room, with the wind evenly, easy adjustment.
4、the use of momentum Boiler arch design, high combustion efficiency
5、the use of new high-intensity large grate tablets to reduce the leakage of coal, to avoid fracture
grate film.
6、boiler control, the protection functions to ensure the boiler safe, stable and highly efficient
operation.
7、allocation of new high-performance auxiliary to reduce boiler power consumption and improve
the reliability of boiler operation.
SZL新型水火管快装热水锅炉技术参数
?
?SZL新型水管蒸汽锅炉SZL Water-tube Packed Series steam Boiler
产品性能:
●简化水循环回路后,减少了水循环流动阻力,提高了上升管流速,对于热水管锅炉在水循环流动阻力
较大的左、右冷水壁加装回水引射装置，提高了水循环的可靠性，保证锅炉安全、稳定运行。
●热效率高
①布置足够的受热面，使燃烧放出的热量能够充分被受热面吸收后传导给工作介质，排烟温度一般在160℃
左右。
②合理布置前、后拱，提高炉膛温度的同时，加强烟气在高温区的扰动，减少了化学不完全燃烧热损失和
飞灰损失。
③采用活络芯大块炉排片，并保证有足够的炉排有效面积，在提高炉排运行可靠性的同时，保证煤充分燃
烬。
④对流管排由顺排改为错排,通过提高传热系数来提高传热效率,进面提高锅炉的热效率。
通过采取以上措施,2t/h~8t/h(1.4MW~5.6MW)的各种锅炉热效率均为76%~79%,高出国家标准要求.
●采用双侧进风，单独风室，单独调节，燃烧稳定，运行可靠。在炉膛出口出口设置烟尘惯性分离装
置，使锅炉原始排尘浓度低于1800mg/Nm3，配合高效多管除尘器，锅炉排尘浓度满足国家一类地区要求。
●结构紧凑，2t/h~8t/h(1.4MW~5.6MW)均快装出厂，安装周期短，投资少。
●上锅筒Φ800改为900，加大蒸汽空间，同时改善汽水分离装置，保证蒸汽品质。
Characteristics of group SZL series boiler product performance
1、double drum longitudinal home-style layout, the structure of the whole assembly, the overall
compact, shorter installation cycle, the boiler room area of savings, reduce capital investment.
2、heating surface arrangement of the full, effective insulation, high thermal efficiency of
boilers.
3、both to the wind, an independent wind room, with the wind evenly, easy adjustment.
4、the use of momentum Boiler arch design, high combustion efficiency
5、the use of new high-intensity large grate tablets to reduce the leakage of coal, to avoid fracture
grate film.
6、boiler control, the protection functions to ensure the boiler safe, stable and highly efficient
operation.
7、allocation of new high-performance auxiliary to reduce boiler power consumption and improve
the reliability of boiler operation.
SZL新型水管快装蒸汽锅炉技术参数
锅炉型号 SZL2-1.25-AⅡ SZL2-0.7-AⅡ SZL4-1.25-AⅡ SZL4-1.6-AⅡ
额定蒸发量t
2 2 4 4
／h
额定蒸汽压力
1.25 0.7 1.25 1.6
MPa
额定蒸汽温
193.3 170.41 193.3 204.3 度℃
额定给水温
20 20 20 20
度℃
受热面积m2：79.14 84.84 62.08 162.2
炉排有效面积
3 3 4.7
4 4.74
m2
适用煤种AⅡAⅡAⅡ A Ⅱ
耗煤量Kg／h 380.88 374.76 787.32 792.72
排烟温度℃167 167 68.1 172.2
设计效率％78.3 78.5 76.97 78.55
最人运输件重
26 25 28.66 32
量t
最大运输件尺
寸mm
5747×2810×3492 5747×2810×3492 6050×3060×3492 6050×3060×3496 锅炉安装外型
尺寸mn
6340×4482×4S22 6340×4482×4822 7095×4956×4797 7095×4956×4797 出厂方式长快装
锅炉型号SZL4-1.0- AⅡSZL6-1.25-AⅡSZL6-1.6-AⅡSZL8-1.25-AⅡSZL8-1.6-AⅡ额定蒸发量t/h 4 6 6 8 8
额定蒸汽压力
MPa
1.0 1.25 1.6 1.25 1.6
额定蒸汽温
度℃
184.07 193.3 204.3 193.3 204.3
额定给水温
度℃
20 20 20 20 20
受热面积m2 162.08 209.05 208.52 281.93 281.93
炉排有效面积
m2
4.74 7.3 7.3 8.834 8.834
适用煤种AⅡAⅡAⅡAⅡAⅡ
耗煤量Kg／h 781.6 150.92 1159.56 1558.8 1571.76
排烟温度℃164.1 175.1 180 165.6 172.6
设计效率％77.23 77.94 77.64 78.76 78.59
最大运输件重
量t
28.66 33 37.6 46 48
最人运输件尺
寸mm 6050×3060×
3492
7896×3385×3492
7896×3385×
3496
8415×3380×
3492
8415×3380×
3492
锅炉安装外型尺寸 mm 7095 × 4956 ×
4797
8545×5279×4797
8545×5279 ×
4797
9916 × 5359 ×
4030
9916 × 5359 ×
4830
出厂方式快装
工业锅炉 >> 燃油、燃气系列锅炉Oil and Gas Series Boilers
SZS系列锅炉SZS series boiler
采用双锅筒布置的D型结构，燃烧器垂直布置在炉膛前墙。上、下锅筒间的对流管束为竖直管，属于自然循环，为典型的自然循环水循环高可靠性结构，它具有高度的自补偿、上升下降比例自动分配特性，因而水循环安全可靠。对流管束极大地增加了锅炉的蒸发受热面，可以将省煤器入口烟气温度降低到较低水平300℃以下(详见热力计算汇总表)，这样可以方便的布置省煤器受热面，保证省煤器安全。同时因为采用了大量的对流管束受热面，锅炉具备较强的超负荷能力。
锅炉采用全膜式壁炉膛，与上、下锅筒及对流管束形成稳定的整体结构，锅炉本体承压部分、钢架、保温、炉衣等在厂内全部组装完成，整体出厂，节省了现场安装周期。
例：SZS16-1.0/210-Q技术参数表
1．额定蒸发量：16t/h
2．工作压力：1.0MP
3．额定蒸汽温度：210℃
4．热效率：88.2%
5．额定耗气量：1214Nm3/h(天然气按35588KJ/Nm3计算)
6．运输尺寸：7.73×3.85×3.6(长×宽×高)
7．运输重量：30T
8．排烟温度：150℃
9．主汽管通径：DN200
10．排污管通径：DN50
11．给水管通径：DN80
12．安全阀管座DN100（2个）
D type structure that adopt double drum layout, the burner fix up in front wall of furnace vertically.
And the convection bank between the water and steam drum are vertical tubes, belongs to natural
recycling, is a typical natural water circulation and high reliability structure, it has high self compensation、the character of up and down proportion automatic assignment, consequently the water cycling is safe and reliable. Convection bank enormously increased boiler evaporate heating surface, which can reduce the smoke temperature the in economizer entrance below to a lower level 300 ℃(see below thermal calculation summary sheet), so it can organize economizer heating surface easily, ensure economizer safety. At the same time because they use a lot of convection bank heating surface, the boiler have the stronger overload ability.
example: SZS16-1.0/210-Q technical parameters
1. rated evaporation capacity : 16t/h
2.working pressure: 1.0MP
3.rated steam temperature: 210℃
4.heat efficiency : 88.2%
5. rated gas consumption: 1214Nm3/h(gas as 35588KJ/Nm3)
6.transport dimension:
7.73×3.85×3.6(length×width×height)
7.transport weight: 30T
8. temperature of drain gas: 150℃
9. main steam pipe drift diameter: DN200
10. discharge pipe drift diameter: DN50
11. water supply pipe drift diameter: DN80
12. safety valve tube base: DN100（2）
?
?诺维特-NSTB蒸汽锅炉Noviter-NSTB steam boiler
诺维特NSTB型蒸汽锅炉，是按既可生产过热蒸汽也可生产饱和蒸汽设计的。它是单锅筒自然循环锅炉，炉膛是膜式水冷壁结构，对流管束同样由膜式水冷壁包围。
诺维特每台NSTB型蒸汽锅炉均为客户量身定作，公司可以按照客户各种特殊的需要生产设计蒸发量为20～200t/h的NSTB蒸汽锅炉，其燃料为液体或气体燃料，一般情况下设计压力可达4MPa，也可设计更高压力锅炉。
诺维特公司采用最先进的设计工具，同时结合多年的传统锅炉设计经验，生产制造出品质优良、运行可靠的蒸汽锅炉。
为了减少锅炉辅助设备的费用以及利于锅炉使用、维修和启动，NSTB蒸汽锅炉在80t/h容量以下均采用单只燃烧器布置。
为了尽可能多的利用所有可利用的能量以及提高锅炉热效率，诺维特公司在进行燃料分析以及各种计算的基础上，在锅炉出口设置了节能器（省煤器）。
全三维计算机辅助设计计算
诺维特NSTB蒸汽锅炉热力计算、烟风阻力计算、水动力计算以及受热面壁温计算根据最新计算流体力学（CFD）与数值传热学（NHT）原理，采用国际上先进的FLUENT软件，精确计算与预测炉内三维空间内每一点的温度、燃烧产物分布以及受热面壁温分布，同时，结合传统锅炉设计的大量丰富经验，以此来合理指导受热面布置，使各受热面受热均匀，延长锅炉使用寿命并且节省钢材。右图为诺维特公司技术专家用FLUENT 5.0软件对锅炉集箱内的静压分布进行全三维计算机模拟后的结果。
世界首创的立式顶吹布置
诺维特NSTB蒸汽锅炉采用立式结构，并且依靠地面支撑，因此结构紧凑，占地面积小；同时，没有复杂的管路系统和支吊系统，便于锅炉的安装和维修。燃烧器位于炉膛的顶部，使炉膛的火焰充满度好，减少了烟气死角，提高了热效率，并保证了水循环的可靠性。
全膜式壁结构
由于炉膛采用膜式水冷壁结构，这样可以充分吸收来自火焰的辐射热，并且改善炉膛的密封性，同时，由于炉墙不直接受火焰辐射，因而可不用耐火材料；对流管束由膜式水冷壁包围，使对流管束的密封性良好，因而也不用耐火材料，使炉墙重量大大减轻，并减少了锅炉现场安装调试的工作量。
强大的低污染排放功能
在燃烧技术上，NSTB蒸汽锅炉采用世界先进的低NOx燃烧器，利用最新的分级配风与烟气再循环技术，极大地抑制了燃料中的氮在燃烧过程中向NOx转变；同时，大炉膛结构降低了整个炉膛容积热负荷，使炉膛中的温度水平较低，抑制了助燃空气中的氮向NOx转变；
负荷调节范围大
精心设计选配的燃烧器与合理的辐射和对流受热面面积分配使锅炉在宽负荷范围内稳定运行并且输出合格参数的蒸汽。
自动化程度高
燃烧器的吹扫、点火、输出功率调节；锅炉出口温度、压力、流量等输出参数的检测、调节；以及锅炉在发生故障（如点火失败、主要热工参数超限等）时的保护与联锁等均自动完成，并且稳定可靠。Noviter- NSTB type steam boiler, its design can produce both superheated steam and saturated steam. It is the single drum natural cycling boiler, the furnace is membrane water wall structure, convection bank is equally surrounded by membrane water wall.
Every Noviter NSTB type steam boiler are custom-made，the company may design and produce NSTB steam boiler that evaporation is 20 ~ 200t/h in accordance with the various special needs of
customers production design , the fuel is liquid or gaseous fuels, usually the design pressure can reach 4MPa, it also can design higher pressure boiler.
Noviter company adopts the most advanced design tools, and combined with years of the conventional boiler design experience, manufacture excellent quality and reliable running steam boiler.
In order to reduce the cost of the boiler auxiliary equipment and conducive to use, maintenance and start, NSTB steam boiler adopts single burner layout below 80t/h capacity.
In order to use all available energy as much as possible and heighten boiler heat efficiency, Noviter Company set a boiler energy device (economizer) at the boiler outlet after fuel analysis and various calculations.
Full 3d computer aided design calculation
Noviter NSTB steam boiler thermal calculation、hydrodynamic calculation and heated side wall
temperature calculation according to the latest computational fluid dynamics (CFD) and numerical heat transfer (NHT) principle, adopts the international advanced FLUENT software, precise calculate every point temperature in the furnace, combustion product distribution and heat side wall temperature
distribution, so as to reasonably guide the heating surface layout, make each heating surface heated evenly, prolong boiler service life and save steel .The right picture is the result that Noviter company technical experts use FLUENT 5.0 software made by full 3d computer simulation to the static pressure distribution in the boiler header
The world's first initiated of vertical top-blown arrangement
Noviter NSTB steam boiler adopts vertical structure, and relies on ground support, so the structure is compact, cover an small area, Meanwhile, no complex piping systems and bearing system, facilitate the installation and maintenance of boiler. The burner is located at the top of furnace, make the furnace flame is good, reduce the smoke blind Angle, increase the thermal efficiency, and ensures the reliability of the water cycle.
full membrane wall structure
Due to the furnace adopts membrane water wall structure, so it can fully absorb radiant heat of the flame, and improve sealing of furnace, at the same time, because of furnace wall does not receive flame radiation directly, thereby it can doesn't need refractory materials; Convection bank are surrounded by membrane water wall, make the sealing of convection bank is good, so also doesn't need refractory material, make the weight of furnace wall reduced greatly, and reduce the workload of boiler installation and debugging at site.
Powerful low-pollution discharge function
In the combustion technology adopts the world advanced low NOx burner, using the latest classification air distribution and gas recirculation technology, greatly restrain the nitrogen in fuel change to NOx in the combustion process, In the meantime, the big furnace chamber structure reduced the whole volume heat load, make the chamber temperature level is low, inhibit the nitrogen in combustion air change to NOx: big range of Load adjust
well-designed burner、rational radiation and convective heating surface area allocation make the boiler work stably in wide load and output the qualified parameters steam.
high automation degree
Burner purging, ignition, output power regulation; Boiler output water temperature, pressure, rate of flow etc output parameters test, adjust, And the boiler protection and interlocking etc can auto-complete when the fault happens (such as ignition failure, main thermal parameter off-gauge), and it is stable and reliable.
?
?诺维特-NWT热水锅炉Noviter-NWT hot water boiler
诺维特NWT型火管热水锅炉是数十年锅炉设计和制造经验的结晶该锅炉是依据先进的燃烧技术、压力容器制造技术和热水锅炉运行技术设计制造的。
诺维特NWT型热水锅炉是一种传统的三回程烟火管锅炉，这种结构有如下特点：结构简单，使用寿命长，可靠性好，并且易于维护保养。
燃烧室的容积热负荷及表面热负荷均满足热效率和环保的要求。
诺维特NWT热水锅炉热功率范围为：1-15MW，燃料为天然气时为1-18MW。设计压力通常为1.0MPa或
1.6MPa，特殊订单要求较低或较高压力的锅炉也可提供。
设计温度通常为120℃-240℃，烟气一侧流阻与锅炉尺寸有关，通常为600-1200Pa，水一侧流阻与水温有关，水温40℃时，流阻在5-7kPa之间。
Noviter- NWT type fire tube hot water boiler is the fruit that decades boiler design and manufacture experience. The design and manufacture of the boiler is based on the most advanced combustion
technology, pressure vessel manufacture technology and hot water boiler operation technology.
Noviter- NWT type hot water boiler is a traditional three return smoke and fire tube boiler, such a
structure has the following characteristics: simple structure, long service life and good reliability, and easy to maintenance.
The combustion chamber volume heat load and surface heat load will meet the thermal efficiency and environmental requirements.
Noviter NWT hot water boiler thermal power is: 1-15MW. It is 1-18MW when the fuel is gas. The design pressure usually is 1.0Mpa, special order that require lower or higher boiler also can be supplied.
Design temperature is usually 120℃- 240 ℃120, the flow resistance of smoke side concerned with the boiler dimension, usually is 600-1200Pa, water side flow resistance concerned with water
temperature, when the water temperature is 40 ℃, flow resistance is between 5-7kPa.
o诺维特-NST蒸汽锅炉Noviter-NST steam boiler
诺维特NST型火管热汽锅炉是数十年锅炉设计和制造经验的结晶。该锅炉是依据最先进的燃烧技术、压力容器制造技术和蒸汽锅炉运行技术设计制造的。
诺维特NST型蒸汽锅炉是一种传统的三回程烟火管锅炉，这种结构有如下特点：结构简单，使用寿命长，可靠性好，并且易于维护保养。
燃烧室的容积热负荷及表面热负荷均满足热效率和环保的要求。蒸汽室负荷低，锅炉内较大的容水量可以满足负荷的急速变化。
这种锅炉通常配备单独的节能器。
诺维特NST蒸汽锅炉的蒸发量为：1.5t/h-20t/h。设计压力一般最高为1.6MPa，特别要求为2.0MPa，标准产品可生产饱和蒸汽。根据特殊订单需要也可配置小型过热器，生产过热蒸汽。
Noviter- NST type fire tube steam boiler is the fruit that decades boiler design and manufacture
experience. The design and manufacture of the boiler is based on the most advanced combustion
technology, pressure vessel manufacture technology and steam boiler operation technology.
oviter- NST type steam boiler is a traditional three return smoke and fire tube boiler, such a structure has the following characteristics: simple structure, long service life and good reliability, and easy to
maintenance.
The combustion chamber volume heat load and surface heat load will meet the thermal efficiency and environmental requirements. Steam room load is low, boiler larger water capacity can satisfy the rapid change of the load.
This kind of boiler usually equipped with a single energy device。
Noviter NST steam boiler evaporation capacity is : 1.5 t/h - 20t/h. generally the highest design pressure is
1.6 MPa, special requirements is
2.0 MPa, standard products can produce saturated steam. According to
the special order needs also can configure a small superheater, produce the superheated steam.
o诺维特-NWTB热水锅炉Noviter-NWTB hot water boiler 全三维计算机辅助设计计算
热力计算、烟风阻力计算、水动力计算以及受热面壁温计算根据最新计算流体力学（CFD）与数值传热学（NHT）原理，采用国际上先进的FLUENT软件，精确计算炉内每一点的温度、燃烧产物分布以及受热面壁温分布，以此来合理指导受热面布置，使各受热面受热均匀，延长锅炉使用寿命并且节省钢材；
世界首创的立式顶吹U型布置
由于锅炉采用立式结构，因此结构紧凑，占地面积小；同时，垂直布置的对流换热部分更加利于锅炉检修时清洗水的排放；U型烟气流程与水流程呈逆流布置，增加了烟气与水的换热温压，降低了排烟温度，使锅炉系统的热效率增大；
强大的低污染排放功能
采用世界先进的低NOx燃烧器，利用最新的分级配风与烟气再循环技术，极大地抑制了燃料中的氮在燃烧过程中向NOx转变；同时，大炉膛结构降低了整个炉膛容积热负荷，使炉膛中的温度水平较低，抑制了助燃空气中的氮向NOx转变；
高效换热技术
由于炉膛采用膜式水冷壁结构，这样可以充分吸收来自火焰的辐射热，并且改善炉膛的密封性，同时，由于炉墙不直接受火焰辐射，因而可不用耐火材料，使炉墙重量大大减轻，同时减轻了构架的重量；对流部分则采用烟管结构，在烟管顶部布置有扰流子，由于扰流子的存在，加强了烟气的扰动，破坏了阻碍换热的边界层，减小了对流换热的热阻，因此强化了气水换热；
强制循环直流锅炉
锅炉给水依靠水泵压力一次流过锅炉，因此受热面的冷却可以得到充分保证，同时，锅炉启动非常快；
由于没有自然循环锅炉中的锅筒以及复杂的管路系统和支吊系统，使其结构简洁流畅，大大简化了制造工艺以及减轻了锅炉重量，安装维修方便。
负荷调节范围大
精心设计选配的燃烧器与合理的辐射和对流受热面面积分配使锅炉在20%～100%负荷之间都能稳定运行并且输出合格参数的热水；
自动化程度高
燃烧器的吹扫、点火、输出功率调节；锅炉出水温度、压力、流量等输出参数的检测、调节；以及锅炉在发生故障（如点火失败、主要热工参数超限等）时的保护与联锁等均自动完成，并且稳定可靠。
Full 3d computer aided design calculation
Thermodynamic calculation, smoke wind resistance calculation, hydrodynamic calculation and heated side wall temperature calculation according to the latest computational fluid dynamics (CFD) and
numerical heat transfer (NHT) principle, adopts the international advanced FLUENT software, precise calculate every point temperature in the furnace, combustion product distribution and heat side wall
temperature distribution, so as to reasonably guide the heating surface layout, make each heating surface heated evenly, prolong boiler service life and save steel;
The world's first initiated of vertical top-blown u-shaped arrangement
Due to the boiler adopts vertical structure, so structure is compact, cover an small area；Meanwhile, vertical layout of the convective heat part is more conducive to cleaning water discharge when boiler maintenance, U-shaped flue gas flow and water flow is counter-current layout, increased flue gas and water heat transfer warm pressing, reduce the exhaust temperature, increase the thermal efficiency of boiler system；
Powerful low-pollution discharge function
Adopting the world advanced low NOx burner, using the latest classification air distribution and gas recirculation technology, greatly restrain the nitrogen in fuel change to NOx in the combustion process, In the meantime, big furnace chamber structure reduced the whole volume heat load, make the chamber temperature level is low, inhibit the nitrogen in combustion air change to NOx:
High efficient heat exchange technology
Due to the chamber adopts membrane water wall structure, so can fully absorb the radiant heat from the flame, and improve the furnace sealing, at the same time, because of furnace wall does not radiate by flame directly, thereby can do not need refractory material, make the furnace wall weight reduced greatly, and reduce the weight of the truss, Convection part uses smoke tube structure, in a pipe top layout turbolator, due to the existence of turbolator, strengthening the flue gas disturbance, destroy the boundary layer that block heating changes and reduce the heat resistance of convective heat transfer, thus strengthening the gas water heat exchange.
Forced circulation once-through boiler
Boiler feedwater flowed the boiler once rely on pump pressure, so the cooling of the heating surface can be fully ensured, meanwhile, boiler start-up is very fast, due to no drum in the natural cycle boiler and complex piping systems and bearing system, make its structure concise and fluent, greatly simplified the manufacturing process and alleviate the boiler weight, the installation and maintenance is easy.
big range of Load adjust
well-designed burner、rational radiation and convective heating surface area allocation make the boiler can be working and output the qualified parameters hot water in the 20% ~ 100% load.
high automation degree
Burner purging, ignition, output power regulation; Boiler output water temperature, pressure, rate of flow etc output parameters test, adjust, And the boiler protection and interlocking etc can auto-complete when the fault happens (such as ignition failure, main thermal parameter off-gauge), and it is stable and reliable.
工业锅炉 >> SHL系列散装锅炉
?
?SHL系列散装锅炉SHL seriers bulk boiler
该系列锅炉为双横锅筒散装水管锅炉，采用“Π”型布置，其结构合理，性能优越，运行安全、可靠。其主要特点如下：
1、设计热效率比国家标准高出4~5个百分点，节能、高效。
2、高大炉膛设计及尾部空气预热器提供热风，可满足多种燃料的稳定、高效燃烧。
3、水循环回路高大，提供充足的水循环动力，水循环安全、可靠。
4、采用鳞片式链条炉排，漏煤少，结合双侧给风，燃烧调整方便。
5、锅炉水容积大，有很强的负荷调整能力，
6、对流管束装有烟气导向板，在引导烟气尽量横向冲刷管束，提高传热系数的同时，保证合理的烟速，减少对受热面的磨损。
7、各受热面清灰方便，可保证锅炉长期高效、经济运行。
8、锅炉控制系统完善，保证锅炉的安全运行，同时可实现多种自动控制，降低劳动强度。
SHL series boiler is double drum horizontal chain grate bulk boiler with air pre-heater at tail .
the burning equipment installs ieprose chain grate to match high=quality auxiliary machine .attachment and perfect automatic equipments.it markes boiler safely.economically and efficiently run.
The unique advantages of this series boiler as following:
1The outlet power of boiler is enough .The design efficiency is high.
2 The boiler installa ieprose chain great whith coal leaking .The heat loss of fuel for incomplete burning is little .
3The wind chamber is single canned fan casing .Each chamber is single .and be adjusted singly and expediently .This markes reasonable organization and full burn.
4At the outlet of boiler furnace set slag proof tube,which avoids closely spaced convection bank of tubes clinkering to improve the result of transmitting heat.
5.Convection bank of tuber sets guide plates for gas flua, which leads smoke breadthwise rust the bank tubes to increase smoke heat transmission coefficient.
6 The whole boiler goes out with bulk,which avoids quick installing boiler being broken in road this can makes the boiler steady.
SHL series field-assembled boiler
The series of boiler are double horizontal furnace field-assembled water tube boiler, adopt “Π” model arrangement, the structure is reasonable, the performance is ascendance, the running is safe and reliable.The most character is as following:
1、Design thermal efficiency is higher 4 to 5 percentage points than the national standard, energy
saving, efficient.
2、Tall and big hearth design and the rear air heater to provide hot wind, it can satisfy multiple fuel
to burn stable and efficient.
3、Water circulation circuit is large enough to provide strong water cycle power, water cycle is safe
and reliable.
4、The usage of flake type grate stoker, small coal leakage, combined with the double side wind
supply, combustion adjustment is convenient.
5、Big boiler water volume, strong load adjustment capability.
6、Convection tube bank equipped smoke and gas oriented board, which is leading the smoke and
gas to wash out the tubes landscape orientation, besides improving the heat transfer coefficient, ensure the reasonable smoke speed, reduce the abrasion to the heating surface.
7、The entire surfaces ash cleanup is convenient to ensure the boiler to run efficiently and safely in
a long term.