ONE、PLC overview
Programmable controller is the first in the late 1960s in the United States, then called PLC programmable logic controller (Programmable Logic Controller) is used to replace relays. For the implementation of the logical judgment, timing, sequence number, and other control functions. The concept is presented PLC General Motors Corporation. PLC and the basic design is the computer functional improvements, flexible, generic and other advantages and relay control system simple and easy to operate, such as the advantages of cheap prices combined controller hardware is standard and overall. According to the practical application of target software in order to control the content of the user procedures memory controller, the controller and connecting the accused convenient target.
In the mid-1970s, the PLC has been widely used as a central processing unit microprocessor, import export module and the external circuits are used, large-scale integrated circuits even when the PLC is no longer the only logical (IC) judgment functions also have data processing, PID conditioning and data communications functions. International Electro technical Commission (IEC) standards promulgated programmable controller for programmable controller draft made the following definition : programmable controller is a digital electronic computers operating system, specifically for applications in the industrial design environment. It used programmable memory, used to implement logic in their internal storage operations, sequence control, timing, counting and arithmetic operations, such as operating instructions, and through digital and analog input and output, the control of various types of machinery or production processes. Programmable controller and related peripherals, and industrial control systems easily linked to form a whole, to expand its functional design. Programmable controller for the user, is a non-contact equipment, the procedures can be changed to change production processes. The programmable controller has become a powerful tool for factory automation, widely popular replication. Programmable controller is user-oriented industries dedicated control computer, with many distinctive features.
First, high reliability, anti-interference capability;
Second，programming visual, simple;
Third, adaptability good;
Fourth functional improvements, strong functional interface.
TWO、History of PLC
Programmable Logic Controllers (PLC), a computing device invented by Richard E. Morley in 1968, have been widely used in industry including manufacturing systems, transportation systems, chemical process facilities, and many others. At that time, the PLC replaced the hardwired logic with soft-wired logic or so-called relay ladder logic (RLL), a programming language visually resembling the hardwired logic, and reduced thereby the configuration time from 6 months down to 6 days [Moody and Morley, 1999].
Although PC based control has started to come into place, PLC based control will remain the technique to which the majority of industrial applications will adhere due to its higher performance, lower price, and superior reliability in harsh environments. Moreover, according to a study on the PLC market of Frost and Sullivan [1995], an increase of the annual sales volume to 15 million PLCs per year with the hardware value of more than 8 billion US dollars has been predicted, though the prices of computing hardware is steadily dropping. The inventor of the PLC, Richard E Morley, fairly considers the PLC market as a 5-billion industry at the present time.
Though PLCs are widely used in industrial practice, the programming of PLC based control systems is still very much relying on trial-and-error. Alike software engineering, PLC software design is facing the software dilemma or crisis in a similar way. Morley himself emphasized this aspect most forcefully by indicating
`If houses were built like software projects, a single woodpecker could destroy civilization.”
Particularly, practical problems in PLC programming are to eliminate software bugs and to reduce the maintenance costs of old ladder logic programs. Though the hardware costs of PLCs are dropping continuously,
reducing the scan time of the ladder logic is still an issue in industry so that low-cost PLCs can be used.
In general, the productivity in generating PLC is far behind compared to other domains, for instance, VLSI design, where efficient computer aided design tools are in practice. Existent software engineering methodologies are not necessarily applicable to the PLC based software design because PLC-programming requires a simultaneous consideration of hardware and software. The software design becomes, thereby, more and more the major cost driver. In many industrial design projects, more than of the manpower allocated for the control system design and installation is scheduled for testing and debugging PLC programs.
In addition, current PLC based control systems are not properly designed to support the growing demand for flexibility and reconfigurability of manufacturing systems. A further problem, impelling the need for a systematic design methodology, is the increasing software complexity in large-scale projects.
The objective of this thesis is to develop a systematic software design methodology for PLC operated automation systems. The design methodology involves high-level description based on state transition models that treat automation control systems as discrete event systems, a stepwise design process, and set of design rules providing guidance and measurements to achieve a successful design. The tangible outcome of this research is to find a way to reduce the uncertainty in managing the control software development process, that is, reducing programming and debugging time and their variation, increasing flexibility of the automation systems, and enabling software reusability through modularity. The goal is to overcome shortcomings of current programming strategies that are based on the experience of the individual software developer.
Three、now of PLC
From the structure is divided into fixed PLC and Module PLC, the two kinds of PLC including CPU board, I/O board, display panel, memory block, power, these elements into a do not remove overall. Module type PLC including CPU module, I/O modules, memory, the power modules, bottom or
a frame, these modules can be according to certain rules combination configuration.
In the user view, a detailed analysis of the CPU's internal unnecessary, but working mechanism of every part of the circuit. The CPU control works, by it reads CPU instruction, interprets the instruction and executes instructions. But the pace of work by shock signal control.
Unit work under the controller command used in a digital or logic operation.In computing and storage register of computation result, it is also among the controller command and work. CPU speed and memory capacity is the important parameters for PLC , its determines the PLC speed of work, IO PLC number and software capacity, so limits to control size.
Central Processing Unit (CPU) is the brain of a PLC controller. CPU itself is usually one of the microcontrollers. Aforetime these were 8-bit microcontrollers such as 8051, and now these are 16-and 32-bit microcontrollers. Unspoken rule is that you’ll find mostly H itachi and Fujicu microcontrollers in PLC controllers by Japanese makers, Siemens in European controllers, and Motorola microcontrollers in American ones. CPU also takes care of communication, interconnectedness among other parts of PLC controllers, program execution, memory operation, overseeing input and setting up of an output.
System memory (today mostly implemented in FLASH technology) is used by a PLC for a process control system. Aside form. this operating system it also contains a user program translated forma ladder diagram to a binary form. FLASH memory contents can be changed only in case where user program is being changed. PLC controllers were used earlier instead of PLASH memory and have had EPROM memory instead of FLASH memory which had to be erased with UV lamp and programmed on programmers. With the use of FLASH technology this process was greatly shortened. Reprogramming a program memory is done through a serial cable in a program for application development.
User memory is divided into blocks having special functions. Some parts of a memory are used for storing input and output status. The real status of an input is stored either as “1”or as “0”in a specific memory bit/ each input or output has one corresponding bit in memory. Other parts
of memory are used to store variable contents for variables used in used program. For example, time value, or counter value would be stored in this part of the memory.
PLC controller can be reprogrammed through a computer (usual way), but also through manual programmers (consoles). This practically means that each PLC controller can programmed through a computer if you have the software needed for programming. Today’s transmission computers are ideal for reprogramming a PLC controller in factory itself. This is of great importance to industry. Once the system is corrected, it is also important to read the right program into a PLC again. It is also good to check from time to time whether program in a PLC has not changed. This helps to avoid hazardous situations in factory rooms (some automakers have established communication networks which regularly check programs in PLC controllers to ensure execution only of good programs).
Almost every program for programming a PLC controller possesses various useful options such as: forced switching on and off of the system input/outputs (I/O lines), program follow up in real time as well as documenting a diagram. This documenting is necessary to understand and define failures and malfunctions. Programmer can add remarks, names of input or output devices, and comments that can be useful when finding errors, or with system maintenance. Adding comments and remarks enables any technician (and not just a person who developed the system) to understand a ladder diagram right away. Comments and remarks can even quote precisely part numbers if replacements would be needed. This would speed up a repair of any problems that come up due to bad parts. The old way was such that a person who developed a system had protection on the program, so nobody aside from this person could understand how it was done. Correctly documented ladder diagram allows any technician to understand thoroughly how system functions.
Electrical supply is used in bringing electrical energy to central processing unit. Most PLC controllers work either at 24 VDC or 220 VAC. On some PLC controllers you’ll find electrical supply as a separate module. Those are usually bigger PLC controllers, while small and medium series already contain the supply module. User has to determine how much
current to take from I/O module to ensure that electrical supply provides appropriate amount of current. Different types of modules use different amounts of electrical current.
This electrical supply is usually not used to start external input or output. User has to provide separate supplies in starting PLC controller inputs because then you can ensure so called “pure” supply for the PLC controller. With pure supply we mean supply where industrial environment can not affect it damagingly. Some of the smaller PLC controllers supply their inputs with voltage from a small supply source already incorporated into a PLC.
Four、PLC design criteria
A systematic approach to designing PLC software can overcome deficiencies in the traditional way of programming manufacturing control systems, and can have wide ramifications in several industrial applications. Automation control systems are modeled by formal languages or, equivalently, by state machines. Formal representations provide a high-level description of the behavior of the system to be controlled. State machines can be analytically evaluated as to whether or not they meet the desired goals. Secondly, a state machine description provides a structured representation to convey the logical requirements and constraints such as detailed safety rules. Thirdly, well-defined control systems design outcomes are conducive to automatic code generation- An ability to produce control software executable on commercial distinct logic controllers can reduce programming lead-time and labor cost. In particular, the thesis is relevant with respect to the following aspects.
In modern manufacturing, systems are characterized by product and process innovation, become customer-driven and thus have to respond quickly to changing system requirements. A major challenge is therefore to provide enabling technologies that can economically reconfigure automation control systems in response to changing needs and new opportunities. Design and operational knowledge can be reused in real-time, therefore, giving a significant competitive edge in industrial practice.
Studies have shown that programming methodologies in automation systems have not been able to match rapid increase in use of computing resources. For instance, the programming of PLCs still relies on a conventional programming style with ladder logic diagrams. As a result, the delays and resources in programming are a major stumbling stone for the progress of manufacturing industry. Testing and debugging may consume over 50% of the manpower allocated for the PLC program design. Standards [IEC 60848, 1999; IEC-61131-3, 1993; IEC 61499, 1998; ISO 15745-1, 1999] have been formed to fix and disseminate state-of-the-art design methods, but they normally cannot participate in advancing the knowledge of efficient program and system design.
A systematic approach will increase the level of design automation through reusing existing software components, and will provide methods to make large-scale system design manageable. Likewise, it will improve software quality and reliability and will be relevant to systems high security standards, especially those having hazardous impact on the environment such as airport control, and public railroads.
The software industry is regarded as a performance destructor and complexity generator. Steadily shrinking hardware prices spoils the need for software performance in terms of code optimization and efficiency. The result is that massive and less efficient software code on one hand outpaces the gains in hardware performance on the other hand. Secondly, software proliferates into complexity of unmanageable dimensions; software redesign and maintenance-essential in modern automation systems-becomes nearly impossible. Particularly, PLC programs have evolved from a couple lines of code 25 years ago to thousands of lines of code with a similar number of 1/O points. Increased safety, for instance new policies on fire protection, and the flexibility of modern automation systems add complexity to the program design process. Consequently, the life-cycle cost of software is a permanently growing fraction of the total cost. 80-90% of these costs are going into software maintenance, debugging, adaptation and expansion to meet changing needs.
Today, the primary focus of most design research is based on mechanical or electrical products. One of the by-products of this proposed
research is to enhance our fundamental understanding of design theory and methodology by extending it to the field of engineering systems design.
A system design theory for large-scale and complex system is not yet fully developed. Particularly, the question of how to simplify a complicated or complex design task has not been tackled in a scientific way. Furthermore, building a bridge between design theory and the latest epistemological outcomes of formal representations in computer sciences and operations research, such as discrete event system modeling, can advance future development in engineering design.
From a logical perspective, PLC software design is similar to the hardware design of integrated circuits. Modern VLSI designs are extremely complex with several million parts and a product development time of 3 years [Whitney, 1996]. The design process is normally separated into a component design and a system design stage. At component design stage, single functions are designed and verified. At system design stage, components are aggregated and the whole system behavior and functionality is tested through simulation. In general, a complete verification is impossible. Hence, a systematic approach as exemplified for the PLC program design may impact the logical hardware design.
Five、AK 1703 ACP
Following the principle of our product development, AK 1703 ACP has high functionality and flexibility, through the implementation of innovative and reliable technologies, on the stable basis of a reliable product platform.
For this, the system concept ACP (Automation, Control and Protection) creates the technological preconditions. Balanced functionality permits the flexible combination of automation, telecontrol and communication tasks. Complemented with the scalable performance and various redundancy configurations, an optimal adaptation to the respective requirements of the process is achieved.
AK 1703 ACP is thus perfectly suitable for automation with integrated telecontrol technology as:
? Telecontrol substation or central device
? Aut omation unit with autonomous functional groups
? Data node, station control device, front-end or gateway
? With local or remote peripherals
? For rear panel installation or 19 inch assembly
? Branch-neutral product, therefore versatile fields of application and high product
stability
? Versatile communication
? Easy engineering
? Plug & play for spare parts
? Open system architecture
? Scalable redundancy
? The intelligent terminal - TM 1703
The Base Unit AK 1703 ACP with Peripheral Elements has one basic system element CP-2010/CPC25 (Master control element) and CP-2012/PCCE25 (Processing and communication element) ,one bus line with max. 16 peripheral elements can be connected.
CP-2010/CPC25 Features and Functions
System Functions:
? Central element,coordin ating all system services
Central hub function for all connected basic system elements
? Time management
Central clock of the automation unit
Setting and keeping the own clock`s time with a resolution of 10ms Synchronization via serid communication via LAN or local
? Redundancy
Voting and change-over for redundant processing and communication elements of the own automation unit
Supports voting and change-over by an external SCA-RS redundancy switch
Supports applicational voting and change-over by an external system,e.g.a control system
? SAT TOLLBOX|| connection
Storing firmware and parameters on a Flash Card
Communication:
? Communication via installable protocol elements to any superior or subordinate automation unit
? Automatic data flow routing
? Priorit y based data transmission (priority control)
? Own circular buffer and process image for each connected station(data keeping)
? Redundant communication routes
Communication with redundant remote stations
? Special application specific functions for dial-up traffic
Test if stations are reachable
Process Peripherals:
? T ransmission of spontaneous information objects from and to peripheral elements, via the serial Ax 1703 peripheral bus Functions for Automation:
? Open-/closed-loop control function for the execution of freely definable user programs which are created with CAEX plus according to IEC 61131-3,https://www.doczj.com/doc/0d10394315.html,ing function diagram technology
512KB for user program
Approx 50.000 variables and signals,2.000 of them retained
Cycle of 10ms or a multiple thereof
Online test
Loadable without service interruption
? Redundant open-/closed-loop control functions
Synchronization via redundancy link
Transmission of periodic process information between the open-/closed-loop control function and the peripheral elements,via the serial Ax 1703 peripheral bus.
Six、SIEMENS PLC
SIMATIC S7-300 series PLC applied to all walks of life and various occasions in the detection, monitoring and control of automation, its power to both the independent operation of, or connected to a network able to achieve complex control.
The photoelectric products with isolation, high electromagnetic compatibility; have high industrial applicability, allowing the ambient temperature of 60 ℃; has strong anti-jamming and anti-vibration and impact resistance, so in a harsh working environment has been widely Applications.
I also mean freedom of communication S7-300 type PLC' s a very unique feature, which allows S7-300-PLC can deal openly with any other communications equipment, communications controller, or PLC S7-300 type can be defined by the user's own Communications protocol (of the agreement ASCII), the baud rate to 1.5 Mbit / s (adjustable). So that can greatly increase the scope of communications so that the control system configuration more flexible and convenient. Of any kind with a serial interface peripherals, such as: printers or bar code readers, Drives, a modem (Modem), the top PC-connected, and so can be used. Users can program to develop communication protocols, the exchange of data (for example: ASCII character code), RS232 interfaces with the equipment can also be used PC / PPI cable linking the free communication communications.
When the PC offline, under the control of the next crew, the whole system can operate normally.
PC that is by control centre, mainly by the PC and laser printer components, using SIMATIC WINCC software platform, the all-Chinese interface, friendly man-machine dialogue. Managers and operators can be observed through a PC, shown in the various kinds of information to understand the present and pion tasks.
WINCC and the ice-storage operation of the automatic control system and all the parameters, and through the mouse to print equipment management and implement at software in the field of automation can be used for all the operators’ control and monitoring tasks. Can be controlled in the process of the events clearly show, and shows the current status and order records, the recorded data can show all or select summary form, or may be required for editing, printing and output statements and trends .
WINCC able to control the critical situation in the early stages of the report, and the signal can be displayed on the screen, can also use
sound to be felt. It supported by online help and operational guidelines to eliminate failure. WINCC a workstation can be devoted to the process control to the process so that important information not is shielded. Software-assisted operation strategy ensures that the process was not illegal to visit and to provide for non-industrial environment in the wrong operation.
WINCC is MICRSOFT WINDOWS98 or WINDOWS NT4.0 operating system, running on a PC object-oriented class 32-bit applications, OLE through the window and ODBC standard mechanism, as an ideal partner to enter the communications world WINDOWS, it can be easily WINCC To integrate a company-wide data processing system.
Seven、Communications
Communications are vital to an individual automation cell and to the automated factory as a whole. We've heard a lot about MAP in the last few years, and a lot of companies have jumped on the band wagon. Many, however were disappointed when a fully-defined and completed MAP specification didn’t appear immediately. Says Larry Kumara:”Right now , MAP is still a moving target for the manufacturers specification that is not final. Presently, for example, people are introducing products to meet the MAP 2.1standard.Yet 2.1-based products will be obsolete when the new standard for MAP,3.0 is introduced.”
Because of this, many PLC vendors are holding off on full MAP implementations. Omron, for example has an ongoing MAP-compatibility program, but Frank Newborn, vice president of Omron’s Industrial Division, reports that because of the lack of a firm definition, Omron's PLCs don't yet talk to MAP.
Since it’s unlikely that an individual PLC would talk to broadband MAP anyway, makers are concentrating n proprietary networks. According to Sal Provanzano, users fear that if they do get on board and vendors withdraw from MAP, they ‘ll pulse width modulation control system be the ones left holding a communications structure that’s not supported.
一、PLC概述
可编程控制器是60年代末在美国首先出现的，当时叫可编程逻辑控制器PLC （Programmable Logic Controller），目的是用来取代继电器。以执行逻辑判断、计时、计数等顺序控制功能。提出PLC概念的是美国通用汽车公司。PLC的基本设计思想是把计算机功能完善、灵活、通用等优点和继电器控制系统的简单易懂、操作方便、价格便宜等优点结合起来，控制器的硬件是标准的、通用的。根据实际应用对象，将控制内容编成软件写入控制器的用户程序存储器内,使控制器和被控对象连接方便。
70年代中期以后，PLC已广泛地使用微处理器作为中央处理器，输入输出模块和外围电路也都采用了中、大规模甚至超大规模的集成电路，这时的PLC已不再是仅有逻辑(Logic)判断功能，还同时具有数据处理、PID调节和数据通信功能。国际电工委员会(IEC)颁布的可编程控制器标准草案中对可编程控制器作了如下的定义：可编程控制器是一种数字运算操作的电子系统，专为在工业环境下应用而设计。它采用了可编程序的存储器，用来在其内部存储执行逻辑运算，顺序控制、定时、计数和算术运算等操作的指令，并通过数字式和模拟式的输入和输出，控制各种类型的机械或生产过程。可编程控制器及其有关外围设备，易于与工业控制系统联成一个整体，易于扩充其功能的设计。
可编程控制器对用户来说，是一种无触点设备，改变程序即可改变生产工艺。目前，可编程控制器已成为工厂自动化的强有力工具，得到了广泛的普及推广应用。
可编程控制器是面向用户的专用工业控制计算机，具有许多明显的特点。
①可靠性高，抗干扰能力强；
②编程直观、简单；
③适应性好；
④功能完善，接口功能强
二、PLC的历史
1968年，Richard E. Morley创造出了新一代工业控制装置可编程逻辑控制器(PLC),现在，PLC已经被广泛应用于工业领域，包括机械制造也、运输系统、化学过程设备、等许多其他领域。初期可编程控制器只是用一种类似于语言的软件逻辑于代替继电器硬件逻辑，并且使开发时间由6个月缩短到6天。
虽然计算机控制技术已经产生，但是PLC控制因为它的高性能、成本低、并且对恶劣的环境有很强的适应能力而在工业控制的广泛应用中保持优势。而且，尽管硬件的价格在逐渐下跌，据估计，根据Frost和Sullivan对PLC市场的调查研究表明，每年销售硬件的价格要比销售PLC的价格（一千五百万）至少多出八十亿美元。PLC的创造者Richard E. Morley十分肯定的认为目前PLC市场是一个价值五十亿的工业
虽然PLC广泛应用于工业控制中，PLC控制系统的程序依然和语法有关。和软件过程一样，PLC的软件设计也以同样的方式会遇到软件错误或危机。Morley在演讲中着重强调了这个方面。
如果房子建造的像软件过程一样，那么仅仅一只啄木鸟就可以摧毁文明。特别的，PLC程序要解决的实际问题是消除软件错误和减少老式梯形逻辑语言的花费。尽管PLC的硬件成本在继续下降，但是在工业控制上减少梯形逻辑的扫描时间仍然是一个问题，以至于可以用到低耗时的PLC。
一般来说，和其他领域相比生产PLC的周期要短很多。例如，在实践中，VISI 设计是一种有效的计算机辅助设计。PLC不需要使用目前的以软件设计为基础软件工程方法论，因为PLC程序要求对软件和硬件搜都要考虑到。因此，软件设计越来越成为花费动力。在许多的工业设计工程中，多数人力分配给了控制系统设计和安装，并且他们被要求对PLC进行程序测试和错误排除。
再者，PLC控制系统不适合设计对适应性和重构有越来越多要求的生产系统。一个更深入的问题是在大规模的工程中软件越来越复杂，促使要有一个系统化的设计方法论。
主题的客观性是为PLC自动控制系统建立一个系统化的软件设计方法论。这个设计方法论包括以状态转换模型为基础的精确的描述，这个转台转换模型是自动控制系统的抽象系统。方法论还包括一个逐步的设计过程，并且要设置一个设计规则，这样才能为一个成功的设计提供导向和方法。这项研究的真正目的是找到一个减少控制软件发展过程的不稳定性的方法，也就是说，减少程序和调试时间以及他们的变化，以增强自动控制系统的适应性，并且通过调整软件使得软件可以再度使用。这样的目的是为了克服目前程序策略的不足之处，而目前的程序策略是以个人软件开发者的经验为基础的。
三、现今的PLC
从结构上分，PLC分为固定式和模块式两种。固定式PLC包括CPU板、I/O板、显示面板、内存块、电源等，这些元素组合成一个不可拆卸的整体。模块式PLC 包括CPU模块、I/O模块、内存、电源模块、底板或机架，这些模块可以按照一定
规则组合配置。
在使用者看来，不必要详细分析CPU的内部电路，但对各部分的工作机制还是应有足够的理解。CPU的控制器控制CPU工作，由它读取指令、解释指令及执行指令。但工作节奏由震荡信号控制。
运算器用于进行数字或逻辑运算，在控制器指挥下工作。寄存器参与运算，并存储运算的中间结果，它也是在控制器指挥下工作。CPU速度和内存容量是PLC 的重要参数，它们决定着PLC的工作速度，IO数量及软件容量等，因此限制着控制规模。
中央处理器(CPU)是PLC控制器的大脑。通常CPU本身就是一个微控制器。起先是8位微控制器例如8051,现在发展为16位和 32位微控制器。你会发现大部分由日本制造商制造的PLC中是日立和Fujicu的微控制器,西门子的微控制器多应用在欧洲的PLC中,摩托罗拉生产的微控制器则独占美国市场。CPU同样关注通信, PLC控制器,操作程序的执行,监督记忆设置的输入和输出等部分的关联性。
PLC使用系统存储器（现在大部分采用闪存技术了）用于过程控制系统。除了这个操作系统之外，它还包括一个由梯形图翻译成而进制形式的用户程序。快擦型存储器（FLASH memory）的内容只有在改变用户程序的时候可以被改变。PLC 控制器比快擦型存储器使用得更早，EPROM存储器比快擦型存储器也更早，快擦型存储器必须用紫外线（UV，Ultra-Violet Ray）灯擦除，并在编程器上进行编程。由于快擦型存储器技术的应用，使得这个过程大大缩短了。在应用程序开发中，通过一个串行电缆可以对程序存储器进行重新编程。
用户存储器被分成具有特殊功能的块。一部分存储器用来存储输入和输出状态。一个输入的实际状态存储状态存储在专用存储器位上，为“1”或者“0”。每一个输入和输出在存储器中都有一个相应的位。另外一部分存储器用来存储用户程序中的变量的内容。例如，定时器值，或者记数器值存放在存储器的这个部分。
PLC控制器可以通过计算机（通常方式）重新编程，但是也可以通过人工编程器9控制台）编程。实际上，这意味着，如果你有编程所需要的软件，早期PLC 控制器可以通过计算机进行编程。今天的传输计算机是工厂自己对PLC控制器进行重新编程的理想设备。这对于工业企业来说是非常重要的。一旦系统修改结束，将正确的程序重新读入PLC控制器也是非常重要的。定期检查PLC中的程序是否改变是非常好的事情。这有助于避免车间发生危险情况（一些汽车制造商已经建立了通信网络，可以定期检查PLC中的程序，以保证运行的程序都是正确的）。
几乎所有用于为PLC控制器编程的程序都拥有各种不同的选项，例如系统输入/输出（I/O线）的强制开关，程序实时跟踪以及图表验证。图表验证对于理解、
定义失败和故障非常必要。程序员可以添加标记，书日和输出设备名称，以及对于查找错误或者对于系统维护很有用的注释。添加注释和标记可以使技术人员（不仅仅是开发人员）很快理解梯形图。注释和标记甚至还可以准确地引用零件号，如果需要更换零件的话。这将加快由于损坏零件而引起的任何问题的修理速度。响应的旧方法是这样的，开发系统的人必须保护这个程序，他旁边再没有人知道系统是怎样完成的。正确的、备有证明文件的梯形图使任何技术人员都能彻底理解系统的功能。
电源是为中央处理单元提供电源的。大部分PLC控制器的工作电压为24VDC 或者220VAC。在有些PLC控制器上，你可以看见作为独立模块的电源。用户必须确定从I/O模块取出多大电流来保证电源提供适当的电流。不同的模块使用不同的电流量。
该电源一般不用于启动外部输入或输出。用户必须提供独立的电源来启动PLC控制器的输入和输出，因为这样可以保证PLC控制器的所谓“纯电源”。使用纯电源意味着工业环境中的电源不会严重影响它。有些较小的PLC控制器从与PLC 控制器集成在一起的小电源为它们的输入提供电压源。
四、PLC的设计标准
一个系统化的设计PLC程序的方法可以克服传统程序生产控制系统的缺点，并且在一些工业应用总有很大的不同。自动控制系统是状态模型用公式语言或等价的语言描述的。公式描述对被控制的系统的行为提供一个精确的描述。可以通过分析估计看状态模型是否达到想要的目标。第二，为状态模型的描述提供结构描述，这个结构描述可以说明逻辑要求和如细节安全规则的限制。第三，好的控制系统设计是对自动控制代码生成有益的——一种能够产生可执行的控制软件的能力，不同的逻辑控制器可以减少程序扫描时间和执行那个时间。特别的，这个主题与随后的部分的是有关的。
在现代制造业中，系统是用过程和结果的革新来描述的，并且因此不得不改变系统性能以快速做出反应。因此，一个大的挑战是提供技术以限制自动控制系统对变化需要和新机会的反应，所以，设计和操作知识可以实时的被再次利用，在工业实践中提供了一个重要的竞争面。
研究表明，在自动化系统中，程序实现的方法已经与计算机资源应用的急速增长不能匹配。例如，可编程逻辑控制器（ＰＬＣ）程序仍然依靠一种方便的有逻辑梯形图的程序实现模式。结果，程序上的延迟和资源成了生产工业过程的主要绊脚石。在可编程逻辑控制器程序设计过程中，测试和调试可能会占用超过百分之五十的人力。在发展和传播“ＳＴＡＴＥ－ＯＦ－ＴＨＥ－ＡＲＴ”已经形
成标准[IEC 60848, 1999; IEC-61131-3, 1993; IEC 61499, 1998; ISO 15745-1, 1999]，但是，基本上这些标准都不能参与有效的程序和系统设计方面知识的革新。
系统的方法通过使用原有的软件模块，有助于增加设计自动化的水平，同时也将提供一种可管理的大规模系统设计的方法。同样的，它也将改善软件的质量的可靠性，以及关系到系统的较高安全标准，尤其是这些对环境有危害影响的，比如：机场控制、公共铁路运输。
软件工业被认为是系统性能的破坏者和系统复杂性的产生者。逐渐下降的硬件价格，破坏了对通过优化程序获得的软件性能的需要。其结果是，一方面造成了大量而低效率的程序代码，另一方面并没有获得高的硬件性能。其次，软件变得难以掌握其程度的复杂；在现代自动化系统中，软件设计和保持系统本质几乎变得不可能。尤其是，可编程逻辑控制器（ＰＬＣ）程序设计从二十五年前的两条主线，发展到现在的成千上万条。现在安全性增加了，例如，关于防火的新措施，以及现代自动化系统的柔韧性增加了程序设计过程的复杂性。因此，软件的使用周期花费是总共花费的一个固定不变的增长部分。百分之八十到九十的花费用于软件维护、调试、优化（改进）、和扩展以满足不断变换的需求。
目前，大部分设计研究的主要焦点都集中在机械和电子产品上。这种有目的性的研究产生了一个副产品，就是通过推广这中研究到系统工程设计领域，从而加固了我们对设计理论和技巧的基本理解。针对大规模和复杂系统的系统设计理论并没有成熟。尤其是，对如何简化一个繁冗而复杂的设计任务这一问题，仍然没有被科学的处理。而且，正在设计理论和代表计算机科学及运筹学研究的认识论结果之间构建一条桥梁，这样的具体应该是逻辑硬件电路设计。
从逻辑学的角度来看，可编程逻辑控制器（PLC）的软件设计类似与集成电路的硬件设计。现代超大规模集成电路设计（Very Large Scale Integration--VLSI）是及其复杂的，一个集成电路一般有几百万个晶体管，而且产品开发周期大都三年左右。设计过程一般都分成局部功能块设计和系统设计两个阶段。在局部功能块设计阶段，单个功能将被设计出来，并予以验证。在系统设计阶段，所有功能块都将被整合起来，整个系统行为特性和功能将会通过仿真形式加以测试。一般来说，所有部分都完全的验证是不可能的。因此，统计学可以作为可编程逻辑控制器（PLC）设计的一个例子，并有可能影响逻辑硬件设计。
五、AK 1703 ACP
AK 1703 ACP凭借着一贯创新的精神与稳定的技术，在以稳定为基础的产品
平台中，拥有高级的功能性和适应性。
ACP（自动化，控制和保护）系统概念保证了AK 1703 ACP功能的实现。稳定的功能性使得自动化控制，远程控制和通信协议三者完美结合。可升级的性能与多种冗余结构，使得AK1703 ACP可以完美处理各种功能要求。
AK 1703 ACP拥有适合现代化自动控制的综合的远程控制技术：
? 水电站远程控制与中控设备
? 拥有自治功能的自动控制单元
? 数据节点, 设备控制站, 尖端科技
? 拥有现场或远程外围设备
? 为后面板安装而设计的19英寸设备
? 专为多种现场应用和高产品要求设计的中间产品
? 多种通信手段
? 简洁的编程
? 唯一的设备插座
? 开放型系统体系结构
? 可升级的冗余
? 智能终端- TM 1703
AK 1703 ACP基本外部设备原件拥有两个基本系统原件CP-2010/CPC25（主控原件）和CP-2012/PCCE25（处理和通信原件），一个总线最多可以连接16个外围设备原件。
CP-2010/CPC25 特征与功能
系统功能：
? 核心元件，协调所有系统功能
连接所有基本功能原件的中心站点
?时间管理
自动控制单元的中控时钟
设定并保持自身时钟的时间，分辨率为10ms
通过互联网或当地的服务通信进行同步
? 冗余
在处理与通信中为自动控制单元选择并转变冗余单元
通过SCA-RS外部冗余开关支持选择与转变功能
通过外接系统实现选择与支持,例如控制系统
? 与SAT TOLLBOX||连接
在闪存卡里存储固件和参数
通信：
? 通过相应的协议原件与高级或附属自动控制单元进行通信
? 为数据流自动选择路径
? 优先基本数据的传输(优先级控制)
? 为每个联检站设立自己的循环缓冲器和处理信息(数据保持)
? 为冗余通信提供路径
与对方站的冗余进行通信
? 通过拨号上网方式对特殊应用实施特殊功能
为可进行冗余的站点进行测试
具有处理功能的外围设备：
? 通过Ax 1703外围设备串口总线自发地将信息传输到外围设备单元
自动控制功能：
? 通过CAEX+按照IEC 61131-3协议创建的可自由定义的拥有开闭环控制功能的用户程序
512KB的用户程序空间
大约50000个可变信号源,2000个常用信号源
10ms的循环时间
网上测试
可随时下载
? 冗余的开闭环功能控制
通过冗余线路进行同步
通过Ax 1703外围设备串口总线在开闭环控制功能与外围接口单元之间不断传输处理信息。
六、2.1.2 SIEMENS可编程序控制器
SIMATIC S7-300系列PLC适用于各行各业、各种场合中的检测、监测及控制的自动化，其强大功能使其无论在独立运行中，或相连成网络皆能实现复杂控制功能。
该产品具有光电隔离，高电磁兼容；具有很高的工业适用性，允许的环境温度达60℃；具有很强的抗干扰、抗振动与抗冲击性能，因此在严酷的工作环境中得到了广泛的应用。
自由通讯口方式也是S7-300型PLC的一个很有特色的功能，它使S7-300型PLC 可以与任何通讯协议公开的其它设备、控制器进行通讯，即S7- 300型PLC可以由用户自己定义通讯协议（例ASCII协议），波特率为1。5Mbit/s（可调整）。因
此使可通讯的范围大大增加，使控制系统配置更加灵活、方便。任何具有串行接口的外设，例如：打印机或条形码阅读器、变频器、调制解调器（Modem）、上位PC机等都可连接使用。用户可通过编程来编制通讯协议、交换数据（例如：ASCII 码字符），具有RS232接口的设备也可用PC/PPI电缆连接起来进行自由通讯方式通讯。
当上位机脱机时，在下位机控制下，整个系统能正常运行。
上位机即图文控制中心，主要由PC机和激光打印机组成，采用SIMATIC WINCC 软件平台，采用全中文操作界面，人机对话友好。管理人员和操作者，可以通过观察PC机所显示的各种信息来了解当前和以往整个冰蓄冷自控系统的运行情况和所有参数，并且通过鼠标进行设备管理和执行打印任务。
WINCC软件在自动化领域中可用于所有的操作员控制和监控任务。可将过程控制中发生的事件清楚地显示出来，可显示当前状态并按顺序记录，所记录的数据可以全部显示或选择简要形式显示，可连续或按要求编辑，并可输出打印报表和趋势图。
WINCC 能够在控制过程中危急情况的初发阶段进行报告，发出的信号既可以在屏幕上显示出来，也可以用声音表现出来。它支持用在线帮助和操作指南来消除故障。某一 WINCC工作站可专门用于过程控制以使那些重要的过程信息不被屏蔽。软件辅助操作策略保证过程不被非法访问，并提供用于工业环境中的无错操作。
WINCC 是MICRSOFT WINDOWS98或WINDOWS NT4。0操作系统下，在PC机上运行的面向对象的一流32位应用软件，通过OLE和ODBC视窗标准机制，作为理想的通讯伙伴进入WINDOWS世界，因此WINCC可容易地结合到全公司的数据处理系统中。
七、通信
通信对于个人自动单元是很重要的。在过去的几年里，我们听到许多关于生产自动化协议的事情，并且许多公司已经加入大有成功希望的事业。然而，当一个完整的生产自动化协议说明书没有及时出现时许多公司都很失望。Larry Kotare说:”现在，生产自动化协议仍然是生产中一个发展的对象，一个说明书并不是最终的结果。例如，虽然当新的生产自动化协议MAP3.0版本使用之时以MAP2.1版本为基础的产品将会被汰，但是现在人们仍然将产品用于MAP2.1版。”
由于这些原因，许多PLC厂家紧盯着MAP的最新结果。如欧姆龙公司正在进行一个有关MAP兼容性的项目。但是欧姆龙生产部门总经理Frank Newborn说由于缺少一个固定的标准，欧姆龙的产品并不涉及到MAP。
由于工业PLC无论何时不可能广泛的涉及到MAP，生产厂家正在考虑专用网
外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
Injection Molding The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to harden when cooled .In most operations ,granular material (the plastic resin) is fed into one end of the cylinder (usually through a feeding device known as a hopper ),heated, and softened(plasticized or plasticized),forced out the other end of the cylinder, while it is still in the form of a melt, through a nozzle into a relatively cool mold held closed under pressure.Here,the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated. Thus, the significant elements of an injection molding machine become: 1) the way in which the melt is plasticized (softened) and forced into the mold (called the injection unit); 2) the system for opening the mold and closing it under pressure (called the clamping unit);3) the type of mold used;4) the machine controls. The part of an injection-molding machine, which converts a plastic material from a sold phase to homogeneous seni-liguid phase by raising its temperature .This unit maintains the material at a present temperature and force it through the injection unit nozzle into a mold .The plunger is a combination of the injection and plasticizing device in which a heating chamber is mounted between the plunger and mold. This chamber heats the plastic material by conduction .The plunger, on each stroke; pushes unbelted plastic material into the chamber, which in turn forces plastic melt at the front of the chamber out through the nozzle The part of an injection molding machine in which the mold is mounted, and which provides the motion and force to open and close the mold and to hold the mold close with force during injection .This unit can also provide other features necessary for the effective functioning of the molding operation .Moving
毕业设计（论文）外文文献翻译 文献、资料中文题目：软件开发概念和设计方法文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院（部）： 专业： 班级： 姓名： 学号： 指导教师： 翻译日期： 2017.02.14
外文资料原文 Software Development Concepts and Design Methodologies During the 1960s, ma inframes and higher level programming languages were applied to man y problems including human resource s yste ms,reservation s yste ms, and manufacturing s yste ms. Computers and software were seen as the cure all for man y bu siness issues were some times applied blindly. S yste ms sometimes failed to solve the problem for which the y were designed for man y reasons including: ?Inability to sufficiently understand complex problems ?Not sufficiently taking into account end-u ser needs, the organizational environ ment, and performance tradeoffs ?Inability to accurately estimate development time and operational costs ?Lack of framework for consistent and regular customer communications At this time, the concept of structured programming, top-down design, stepwise refinement，and modularity e merged. Structured programming is still the most dominant approach to software engineering and is still evo lving. These failures led to the concept of "software engineering" based upon the idea that an engineering-like discipl ine could be applied to software design and develop ment. Software design is a process where the software designer applies techniques and principles to produce a conceptual model that de scribes and defines a solution to a problem. In the beginning, this des ign process has not been well structured and the model does not alwa ys accurately represent the problem of software development. However,design methodologies have been evolving to accommo date changes in technolog y coupled with our increased understanding of development processes. Whereas early desig n methods addressed specific aspects of the
(此文档为word格式，下载后您可任意编辑修改！) 冷冲模具使用寿命的影响及对策 冲压模具概述 冲压模具--在冷冲压加工中，将材料(金属或非金属)加工成零件(或半成品)的一种特殊工艺装备，称为冷冲压模具(俗称冷冲模)。冲压--是在室温下，利用安装在压力机上的模具对材料施加压力，使其产生分离或塑性变形，从而获得所需零件的一种压力加工方法。 冲压模具的形式很多，一般可按以下几个主要特征分类： 1?根据工艺性质分类 (1)冲裁模沿封闭或敞开的轮廓线使材料产生分离的模具。如落料模、冲孔模、切断模、切口模、切边模、剖切模等。 (2)弯曲模使板料毛坯或其他坯料沿着直线(弯曲线)产生弯曲变形，从而获得一定角度和形状的工件的模具。 (3)拉深模是把板料毛坯制成开口空心件，或使空心件进一步改变形状和尺寸的模具。 (4)成形模是将毛坯或半成品工件按图凸、凹模的形状直接复制成形，而材料本身仅产生局部塑性变形的模具。如胀形模、缩口模、扩口模、起伏成形模、翻边模、整形模等。2?根据工序组合程度分类 (1)单工序模在压力机的一次行程中，只完成一道冲压工序的模具。 (2)复合模只有一个工位，在压力机的一次行程中，在同一工位上同时完成两道或两道以上冲压工序的模具。 (3)级进模(也称连续模) 在毛坯的送进方向上，具有两个或更多的工位，在压力机的一次行程中，在不同的工位上逐次完成两道或两道以上冲压工序的模具。 冲冷冲模全称为冷冲压模具。 冷冲压模具是一种应用于模具行业冷冲压模具及其配件所需高性能结构陶瓷材料的制备方法，高性能陶瓷模具及其配件材料由氧化锆、氧化钇粉中加铝、错元素构成，制备工艺是将氧化锆溶液、氧化钇溶液、氧化错溶液、氧化铝溶液按一定比例混合配成母液，滴入碳酸氢铵，采用共沉淀方法合成模具及其配件陶瓷材料所需的原材料，反应生成的沉淀经滤水、干燥，煅烧得到高性能陶瓷模具及其配件材料超微粉，再经过成型、烧结、精加工，便得到高性能陶瓷模具及其配件材料。本发明的优点是本发明制成的冷冲压模具及其配件使用寿命长，在冲压过程中未出现模具及其配件与冲压件产生粘结现象，冲压件表面光滑、无毛刺，完全可以替代传统高速钢、钨钢材料。 冷冲模具主要零件冷冲模具是冲压加工的主要工艺装备，冲压制件就是靠上、下模具的相对运动来完成的。 加工时由于上、下模具之间不断地分合，如果操作工人的手指不断进入或停留在模具闭合区，便会对其人身安全带来严重威胁。 1
外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华
外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文
应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。
I / 11 本科毕业设计外文翻译 <2018届） 论文题目基于WEB 的J2EE 的信息系统的方法研究 作者姓名[单击此处输入姓名] 指导教师[单击此处输入姓名] 学科(专业 > 所在学院计算机科学与技术学院 提交日期[时间 ]
基于WEB的J2EE的信息系统的方法研究 摘要：本文介绍基于工程的Java开发框架背后的概念，并介绍它如何用于IT 工程开发。因为有许多相同设计和开发工作在不同的方式下重复，而且并不总是符合最佳实践，所以许多开发框架建立了。我们已经定义了共同关注的问题和应用模式，代表有效解决办法的工具。开发框架提供：<1）从用户界面到数据集成的应用程序开发堆栈；<2）一个架构，基本环境及他们的相关技术，这些技术用来使用其他一些框架。架构定义了一个开发方法，其目的是协助客户开发工程。 关键词：J2EE 框架WEB开发 一、引言 软件工具包用来进行复杂的空间动态系统的非线性分析越来越多地使用基于Web的网络平台，以实现他们的用户界面，科学分析，分布仿真结果和科学家之间的信息交流。对于许多应用系统基于Web访问的非线性分析模拟软件成为一个重要组成部分。网络硬件和软件方面的密集技术变革[1]提供了比过去更多的自由选择机会[2]。因此，WEB平台的合理选择和发展对整个地区的非线性分析及其众多的应用程序具有越来越重要的意义。现阶段的WEB发展的特点是出现了大量的开源框架。框架将Web开发提到一个更高的水平，使基本功能的重复使用成为可能和从而提高了开发的生产力。 在某些情况下，开源框架没有提供常见问题的一个解决方案。出于这个原因，开发在开源框架的基础上建立自己的工程发展框架。本文旨在描述是一个基于Java的框架，该框架利用了开源框架并有助于开发基于Web的应用。通过分析现有的开源框架，本文提出了新的架构，基本环境及他们用来提高和利用其他一些框架的相关技术。架构定义了自己开发方法，其目的是协助客户开发和事例工程。 应用程序设计应该关注在工程中的重复利用。即使有独特的功能要求，也
济南大学泉城学院 毕业设计外文资料翻译 题目现代快速经济制造模具技术 专业机械制造及其自动化 班级专升本1302班 学生刘计良 学号2013040156 指导教师刘彦 二〇一五年三月十六日
Int J Adv Manuf Technol ,(2011) 53:1–10DOI 10.1007/s00170-010-2796-y Modular design applied to beverage-container injection molds Ming-Shyan Huang & Ming-Kai Hsu Received: 16 March 2010 / Accepted: 15 June 2010 / Published online: 25 June 2010 # Springer-Verlag London Limited 2010 Modular design applied to beverage-container injection molds The Abstract: This work applies modular design concepts to designating beverage-container injection molds. This study aims to develop a method of controlling costs and time in relation to mold development, and also to improve product design. This investigation comprises two parts: functional-ity coding, and establishing a standard operation procedure, specifically designed for beverage-container injection mold design and manufacturing. First, the injection mold is divided into several modules, each with a specific function. Each module is further divided into several structural units possessing sub-function or sub-sub-function. Next, dimen-sions and specifications of each unit are standardized and a compatible interface is constructed linking relevant units. This work employs a cup-shaped beverage container to experimentally assess the performance of the modular design approach. The experimental results indicate that the modular design approach to manufacturing injection molds shortens development time by 36% and reduces costs by 19 23% compared with the conventional ap-proach. Meanwhile, the information on
Optimum blank design of an automobile sub-frame Jong-Yop Kim a ,Naksoo Kim a,*,Man-Sung Huh b a Department of Mechanical Engineering,Sogang University,Shinsu-dong 1,Mapo-ku,Seoul 121-742,South Korea b Hwa-shin Corporation,Young-chun,Kyung-buk,770-140,South Korea Received 17July 1998 Abstract A roll-back method is proposed to predict the optimum initial blank shape in the sheet metal forming process.The method takes the difference between the ?nal deformed shape and the target contour shape into account.Based on the method,a computer program composed of a blank design module,an FE-analysis program and a mesh generation module is developed.The roll-back method is applied to the drawing of a square cup with the ˉange of uniform size around its periphery,to con?rm its validity.Good agreement is recognized between the numerical results and the published results for initial blank shape and thickness strain distribution.The optimum blank shapes for two parts of an automobile sub-frame are designed.Both the thickness distribution and the level of punch load are improved with the designed blank.Also,the method is applied to design the weld line in a tailor-welded blank.It is concluded that the roll-back method is an effective and convenient method for an optimum blank shape design.#2000Elsevier Science S.A.All rights reserved. Keywords:Blank design;Sheet metal forming;Finite element method;Roll-back method
毕业设计（论文） 外文翻译 题目西安市水源工程中的 水电站设计 专业水利水电工程 班级 学生 指导教师 2016年
研究钢弧形闸门的动态稳定性 牛志国 河海大学水利水电工程学院，中国南京，邮编210098 nzg_197901@https://www.doczj.com/doc/0d10394315.html,，niuzhiguo@https://www.doczj.com/doc/0d10394315.html, 李同春 河海大学水利水电工程学院，中国南京，邮编210098 ltchhu@https://www.doczj.com/doc/0d10394315.html, 摘要 由于钢弧形闸门的结构特征和弹力，调查对参数共振的弧形闸门的臂一直是研究领域的热点话题弧形弧形闸门的动力稳定性。在这个论文中，简化空间框架作为分析模型，根据弹性体薄壁结构的扰动方程和梁单元模型和薄壁结构的梁单元模型，动态不稳定区域的弧形闸门可以通过有限元的方法，应用有限元的方法计算动态不稳定性的主要区域的弧形弧形闸门工作。此外，结合物理和数值模型，对识别新方法的参数共振钢弧形闸门提出了调查，本文不仅是重要的改进弧形闸门的参数振动的计算方法，但也为进一步研究弧形弧形闸门结构的动态稳定性打下了坚实的基础。 简介 低举升力，没有门槽，好流型，和操作方便等优点，使钢弧形闸门已经广泛应用于水工建筑物。弧形闸门的结构特点是液压完全作用于弧形闸门，通过门叶和主大梁，所以弧形闸门臂是主要的组件确保弧形闸门安全操作。如果周期性轴向载荷作用于手臂，手臂的不稳定是在一定条件下可能发生。调查指出:在弧形闸门的20次事故中，除了极特殊的破坏情况下，弧形闸门的破坏的原因是弧形闸门臂的不稳定;此外，明显的动态作用下发生破坏。例如:张山闸，位于中国的江苏省，包括36个弧形闸门。当一个弧形闸门打开放水时，门被破坏了，而其他弧形闸门则关闭，受到静态静水压力仍然是一样的，很明显，一个动态的加载是造成的弧形闸门破坏一个主要因素。因此弧形闸门臂的动态不稳定是造成弧形闸门(特别是低水头的弧形闸门)破坏的主要原是毫无疑问。
The mold designing and manufacturing The mold is the manufacturing industry important craft foundation, in our country, the mold manufacture belongs to the special purpose equipment manufacturing industry. China although very already starts to make the mold and the use mold, but long-term has not formed the industry. Straight stabs 0 centuries 80's later periods, the Chinese mold industry only then drives into the development speedway. Recent years, not only the state-owned mold enterprise had the very big development, the three investments enterprise, the villages and towns (individual) the mold enterprise's development also rapid quietly. Although the Chinese mold industrial development rapid, but compares with the demand, obviously falls short of demand, its main gap concentrates precisely to, large-scale, is complex, the long life mold domain. As a result of in aspect and so on mold precision, life, manufacture cycle and productivity, China and the international average horizontal and the developed country still had a bigger disparity, therefore, needed massively to import the mold every year . The Chinese mold industry must continue to sharpen the productivity, from now on will have emphatically to the profession internal structure adjustment and the state-of-art enhancement. The structure adjustment aspect, mainly is the enterprise structure to the specialized adjustment, the product structure to center the upscale mold development, to the import and export structure improvement, center the upscale automobile cover mold forming analysis and the structure improvement, the multi-purpose compound mold and the compound processing and the laser technology in the mold design manufacture application, the high-speed cutting, the super finishing and polished the technology, the information direction develops . The recent years, the mold profession structure adjustment and the organizational reform step enlarges, mainly displayed in, large-scale, precise, was complex, the long life, center the upscale mold and the mold standard letter development speed is higher than the common mold product; The plastic mold and the compression casting mold proportion increases; Specialized mold factory quantity and its productivity increase;
Section 3 Design philosophy, design method and earth pressures 3.1 Design philosophy 3.1.1 General The design of earth retaining structures requires consideration of the interaction between the ground and the structure. It requires the performance of two sets of calculations: 1）a set of equilibrium calculations to determine the overall proportions and the geometry of the structure necessary to achieve equilibrium under the relevant earth pressures and forces; 2）structural design calculations to determine the size and properties of thestructural sections necessary to resist the bending moments and shear forces determined from the equilibrium calculations. Both sets of calculations are carried out for specific design situations (see 3.2.2) in accordance with the principles of limit state design. The selected design situations should be sufficiently Severe and varied so as to encompass all reasonable conditions which can be foreseen during the period of construction and the life of the retaining wall. 3.1.2 Limit state design This code of practice adopts the philosophy of limit state design. This philosophy does not impose upon the designer any special requirements as to the manner in which the safety and stability of the retaining wall may be achieved, whether by overall factors of safety, or partial factors of safety, or by other measures. Limit states (see 1.3.13) are classified into: a) ultimate limit states (see 3.1.3); b) serviceability limit states (see 3.1.4). Typical ultimate limit states are depicted in figure 3. Rupture states which are reached before collapse occurs are, for simplicity, also classified and
毕业设计（论文）外文资料翻译 学生姓名: 学号: 专业: 指导教师: 学院: 日期:
外文资料翻译要求 一、译文内容须与课题研究或调研内容高度一致。 二、译文翻译得当、语句通顺，不少于4000字。 三、译文格式要求：译文题目（即一级标题）采用小三黑体、二级 标题采用四号黑体、三级标题采用13磅黑体；图题和表题采用五号宋体，外文和符号采用五号Times New Roman；正文采用小四宋体，外文和符号采用小四Times New Roman，行间距为20磅；A4纸双面打印。 四、原文及译文一起装订，顺序依次为封面（背面为外文资料翻译 要求）、译文评阅（单面打印）、译文、外文原文。
译文评阅 评分：___________________（百分制）指导教师（签名）：___________________ 年月日
原文 Treating and the modern mould make high speed One, summarizes 1 the present situation that the mould makes at present and trend The mould is important handicraft equipment , occupies decisive position in industrid departments such as consumer goods , electrical equipment electron , automobile , aircraft fabrication. The mould is important handicraft equipment , occupies decisive position in industrid departments such as consumer goods , electrical equipment electron , automobile , aircraft fabrication. Industrial product part rough process 75%, the finish machining 50% and plastic part 90% will be completed from the mould. The Chinese mould market demand already reaches scale of 500 hundred million yuan at present. The automobile mould , the annual growth rate covering piece of mould especially will exceed 20 %; Also prompt building material mould development , various heterotype material the mould , wall surface and floor mould become new mould growth point , plastic doors and windows and plastic drain-pipe increase to exceeding 30 by in the upcoming several years %; The home appliance mould annual growth rate will exceed 10 %; The IT industry year increases % speed equally exceeding 20 , the need to the mould accounts for 20 of mould marketplace %.2004 annual Chinese machine tools implements industry output value will continue to increase. Our country mould fabrication market potential is enormous. The basis data counts , in recent years, our country mould year gross output value reaches 3 billion U. S. dollar , entrance exceeds 1 billion U. S. dollar, exceed 100 million U. S. dollar outlet. Increase by from 25% to increase to 2005 50% of 1995. The expert foretells that abroad: Asia portion being occupied by in mould fabrication in the whole world, will from 25% to increase to 2005 50% of 1995.
附件1：外文资料翻译译文 包装对食品发展的影响 一个消费者对某个产品的第一印象来说包装是至关重要的，包括沟通的可取性，可接受性，健康饮食形象等。食品能够提供广泛的产品和包装组合，传达自己加工的形象感知给消费者，例如新鲜包装/准备，冷藏，冷冻，超高温无菌，消毒（灭菌），烘干产品。 食物的最重要的质量属性之一，是它的味道，其影响人类的感官知觉，即味觉和嗅觉。味道可以很大程度作退化的处理和/或扩展存储。其他质量属性，也可能受到影响，包括颜色，质地和营养成分。食品质量不仅取决于原材料，添加剂，加工和包装的方法，而且其预期的货架寿命（保质期）过程中遇到的分布和储存条件的质量。越来越多的竞争当中，食品生产商，零售商和供应商；和质量审核供应商有显着提高食品质量以及急剧增加包装食品的选择。这些改进也得益于严格的冷藏链中的温度控制和越来越挑剔的消费者。 保质期的一个定义是：在食品加工和包装组合下，在食品的容器和条件，在销售点分布在特定系统的时间能保持令人满意的食味品质。保质期，可以用来作为一个新鲜的概念，促进营销的工具。延期或保质期长的产品，还提供产品的使用时间，方便以及减少浪费食物的风险，消费者和/或零售商。包装产品的质量和保质期的主题是在第3章中详细讨论。 包装为消费者提供有关产品的重要信息，在许多情况下，使用的包装和/或产品，包括事实信息如重量，体积，配料，制造商的细节，营养价值，烹饪和开放的指示，除了法律准则的最小尺寸的文字和数字，有定义的各类产品。消费者寻求更详细的产品信息，同时，许多标签已经成为多语种。标签的可读性是为视障人士的问题，这很可能成为一个对越来越多的老年人口越来越重要的问题。 食物的选择和包装创新的一个主要驱动力是为了方便消费者的需求。这里有许多方便的现代包装所提供的属性，这些措施包括易于接入和开放，处置和处理，产品的知名度，再密封性能，微波加热性，延长保质期等。在英国和其他发达经济体显示出生率下降和快速增长的一个相对富裕的老人人口趋势，伴随着更加苛