笔盖注塑模具设计毕业设计论文

  • 格式:doc
  • 大小:1.15 MB
  • 文档页数:34

下载文档原格式

  / 34
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

毕业设计说明书

题目:笔盖注塑模具设计

院(系):国防生学院

专业:机械设计制造及其自动化

学生姓名:卢卫

学号:1000110107

指导教师单位:机电工程学院

姓名:曹泰山

职称:讲师

题目类型:☐理论研究☐实验研究☑工程设计☐工程技术研究☐软件开发

2014年5月4日

摘要

注塑成型在整个制造业的生产中占有十分重要的地位,据估计注塑成型的制品约占模具塑料制品总产量的三分之一及以上,注塑模具在模具工业中的重要性显而易见,现在注塑模具设计和制造中的传统方法早已满足不了现代生产发展的需要,为赢得竞争市场,持续发展,模具生产必须变革传统的生产方法,引进新技术、新思维。

在计算机技术日益发达的今天,将计算机运用于注塑模具以及制造业中已经迫在眉睫。本文主要研究的工作和成果如下:

本文具体的阐述了模具CAD/CAE的技术特点,以及先进制造模式在模具行业中的应用,在分析的国际国内模具市场,国内模具CAD/CAE的发展趋势的基础上提出以计算机应用技术为手段的辅助模具设计的新方法。主要针对注塑模具常见的成型方法进行了分析研究,以达到将注塑模具过程智能化在熟悉注塑模具设计基本知识的基础上,对系统进行分析并设计出系统的总体框架。我们运用Pro/E软件中的模具模块以及塑料仿真模块来进行对模具进行了各个系统的设计。

本论文是对笔盖注塑模具设计的一个详细的介绍,这次的笔盖模具设计我们主要采用了侧抽芯注射模。每个笔盖有一个大孔,成型需要侧抽芯。本模具采用一模十二腔,二次分型,点浇口进料,弹簧和斜导柱分别抽芯。设计的主要内容有:笔盖的设计,笔盖材料的选择,注塑机的选用、分型面、型腔布局、浇注系统、型腔尺寸计算、型芯尺寸的计算、螺纹型心、模架的选择、推出脱模机构的设计、温度调节系统和装配图与零件图的绘制等。本次设计主要是通过对塑件的形状、尺寸及其精度要求进行注射成型工艺的工艺分析、侧向分型与抽芯机构设计,重点在侧抽芯机构的设计。在这过程中分析了模具受力,推出脱模机构的设计,合模导向机构的设计,冷却系统的设计以及排气系统等,并绘制完整的模具装配总图和主要的模具零件图。设计中力求模具结构设计简单、合理、实用,使得模具结构紧凑、工作可靠,可实现全自动操作。

关键词:注塑模;一模12穴;型腔;导柱。

Abstract

Injection molding occupies a very important position in the whole manufacturingproduction, It is estimated that about one third of injection molding products mold plastic products production and more importance in the mold injection mold industry is obvious,now injection mold design and manufacture of traditional methods had failed to meet the needs of modern production development, to win the competition in the market, sustainable development, mold production must change the traditional production methods, the introduction of new technology, new thinking

This paper describes the technical characteristics of the specific mold CAD/CAE, as well as advanced manufacturing mode in the mold industry, mold on the basis of international and domestic market analysis, the domestic mold cadcae trends on the proposedapplication of computer technology as a means of secondary mold design new method. The main injection mold for forming a common method were analyzed, in order to achievethe injection molding process intelligence In the familiar basic knowledge of injection mold design based on system analysis anddesign of the overall framework of the system. We use proe software modules and plastic mold simulation module to perform a type ofmold, core pulling, each system has been designed

Daily necessity, sometimes adopt the not that high plastics of accuracy and strengths to spread to move, because the plastics has the plasticity strong, the density is small, higher than strength, the knot good luck, the chemistry stability is high, diverse characteristics of external appearance, as a result be subjected to more and more factories house and the people's fancies.The plastics industry is a newly arisen industry, is along with the development of the petroleum industry but should but living of, the plastics system piece almost have already entered each realm of the whole industry sections and people's daily lifes currently.Along with the machine industry electronics industry, aviation industry, the instrument appearance industry and usually the development of the thing industry, the plastics models the demand of make the piece more and more, the quantity request is also more and more high, this will beg model the piece of the development of the molding tool, the level of the design manufacturing also the beard is more and more high.This text also design the process to carry on elaborate to a cover molding tool.

Key words:Injection mold; Exactly 12 holes; Cavity; Guide post;