Bw500全套说明书

操作手册船桥导航监视警报系统 (BNWAS)BR-500型号Pub. No. OZS-44610-D DATE OF ISSUE: MAY. 2012i重要注意事项概述• 设备操作员必须阅读和遵守本手册的说明。

错误的操作或维护可能导致保修失效，或造成伤害。

• 未经 FURUNO 的书面许可，不得复制本手册的任何部分。

• 如果本手册丢失或破损，请咨询经销商如何更换。

• 本手册内容和设备规格如有更改，恕不另行通知。

• 本手册中屏幕显示（或图示）范例可能与您的屏幕显示有所区别。

您所看到的屏幕取决于您的系统配置和设备设置。

• 请保留手册，以备将来参考。

• 如未经 FURUNO 授权擅自对设备（包括软件）进行任何改装/修改，保修将失效。

• 所有品牌和产品名称均为各自持有者的商标、注册商标或服务标记。

如何丢弃本产品须根据当地工业废品处理规范丢弃本产品。

如在美国处理，请参阅电子工业联盟的主页 (/)，了解正确的处理方法。

如何丢弃废旧电池有些 FURUNO 产品使用电池。

如要了解您的产品是否使用电池，请参阅维护章节。

如果使用电池，请遵守以下说明。

请用胶带封住电池正负接头后再弃置，防止因短路造成燃烧或发热。

在欧盟打叉的垃圾桶标志表示禁止将所有类型的电池丢弃到标准垃圾桶或垃圾站。

请根据所在国家的法规和《电池指令 2006/66/EU 》，将废旧电池带到电池回收站点。

在美国莫比斯环符号（三箭追逐环）表示必须回收的镍镉和铅酸充电电池。

请根据当地法律将废旧电池带到电池回收站点。

在其他国家不存在电池回收标志国际标准。

其他国家如在将来制作自己的回收标志，该标志的数量将增加。

PbNi-Cd安全说明parts inside. ii安全说明iii目录前言 (vi)系统配置 (viii)1.主警报面板...............................................................................................................1-1 1.1控制钮..............................................................................................................................................1-1 1.2如何开启/关闭系统.........................................................................................................................1-1 1.3BNWAS 显示屏................................................................................................................................1-2 1.4如何调整 LCD/LED 亮度、按键背光................................................................................................1-3 1.5如何选择支援船员............................................................................................................................1-4 1.6模式..................................................................................................................................................1-4 1.7休眠期..............................................................................................................................................1-4 1.8监视警报顺序...................................................................................................................................1-5 1.9帮助区域...........................................................................................................................................1-81.9.1 系统故障指示........................................................................................................................1-81.9.2 操作性事件指示.....................................................................................................................1-9 1.10如何进行紧急呼叫............................................................................................................................1-91.11如何呼叫导航员..............................................................................................................................1-102.另选购设备...............................................................................................................2-1 2.1计时器重置面板 BR-530，BR-550..................................................................................................2-1 2.2船舱面板 BR-540.............................................................................................................................2-2 2.3运动检测器 BR-560..........................................................................................................................2-32.4闪光灯 BR-570.................................................................................................................................2-43.维护与故障排除........................................................................................................3-1 3.1维护..................................................................................................................................................3-1 3.2更换保险丝.......................................................................................................................................3-1 3.3故障排除...........................................................................................................................................3-2 3.4如何检查处理器单元/船舱面板/计时器重置面板之间的连接........................................................3-33.5主要部件的预期寿命.........................................................................................................................3-44.安装..........................................................................................................................4-1 4.1设备列表...........................................................................................................................................4-1 4.2安装注意事项...................................................................................................................................4-2 4.3主警报面板 BR-510.........................................................................................................................4-34.3.1 桌面安装................................................................................................................................4-34.3.2 嵌入式安装............................................................................................................................4-34.3.3 屏蔽膜（选件）.....................................................................................................................4-4 4.4处理器单元 BR-520.........................................................................................................................4-4 4.5计时器重置面板 BR-530、机舱面板 BR-540、运动检测器 BR-560、闪光灯 BR-570（另选购单元）.........................................................................................................................................................4-44.5.1 嵌入式安装............................................................................................................................4-44.5.2 舱壁安装................................................................................................................................4-5 4.6防水计时器重置面板 BR-550（选件）............................................................................................4-9 4.7布线................................................................................................................................................4-114.7.1 处理器单元..........................................................................................................................4-114.7.2 布线信息..............................................................................................................................4-134.7.3 主警报面板..........................................................................................................................4-144.7.4 计时器重置面板、机舱面板、运动检测器、闪光灯.............................................................4-144.7.5 闪光灯.................................................................................................................................4-15 ivSUMARIO4.7.6 如何装配船舱面板、计时器重置面板、闪光灯和运动检测器的电缆...................................4-15 4.8DIP 开关，旋转开关设置...............................................................................................................4-16 4.9如何调整 LED 亮度.......................................................................................................................4-17 4.10菜单设置........................................................................................................................................4-174.10.1 管理员菜单........................................................................................................................4-174.10.2 检修菜单...........................................................................................................................4-21 4.11I/O 语句信息..................................................................................................................................4-22附录1 菜单树、缩略语、JIS 电缆选用指南..............................................................AP-1规格............................................................................................................................SP-1装箱单..........................................................................................................................A-1外形图..........................................................................................................................D-1接线图..........................................................................................................................S-1索引.............................................................................................................................IN-1vvi前言尊敬的 BR-500 用户承蒙惠购 FURUNO BR-500 船桥导航监视警报系统 (BNWAS )。

Continuous weighing –No light matterMilltronics MSI and MMI Answers for industry./continuous-weighingMSI/MMIIf high accuracy matters to you, and your application is rough and rugged, then the Milltronics MSI heavy-duty, single idler scale is your solution for process and load-out control. For even greater accuracy choose Milltronics MMI, a two or three idler scale for custody transfer, and use on applications with fast-moving belts, short idler spacing, and light or uneven belt loading. Milltronics MSI and MMI outperform many four or six-idler scales on accuracy and durability. On your behalf, we don't consider continuous weighing a light matter. • Outstanding accuracy and repeatability• Unique parallelogram stylestrain gauge load cell with 300% overload protection for instant response to vertical loading. This allows the handling of higher belt speeds. The stainless steel triple beam design makes it suited for the harshest condi-tions, with high moisture and corrosion resistance • Patented electronic load cell balancing maintains accuracy even with severe off-centre belt loading• Drop-in installation makes alignment easy, saving time at installation• Milltronics BW1002 or BW500 integrators or SIWAREX FTC com-plete your belt scale system • Milltronics MSI/BW500 and/or MMI-2/BW500 systems are NTEP, Measurement Canada, OIML, MID and SABS approved for custody transfer7ML1996 5KT01 - March 2009Available as pdf only1Review by Siemens application engineer required. 2Milltronics BW100 not applicable to Milltronics MMI models.Allen-Bradley is a registered trademark of Rockwell Automation. DeviceNet is a trademark of Open DeviceNetVendor Association. Modbus is a registered trademark of Schneider Electric. SmartLinx is a registered trademark of Siemens Milltronics Process Instruments Inc. Specifi cations are subject to change without notice. © Siemens Milltronics Process Instruments Inc. 2009.。

Oil BathBO500Instruction ManualFirst Edition●Thank you for purchasing “Oil Bath” of YamatoScientific Co., Ltd.●Carefully read this Instruction Manual and theWarranty Card and be fully acquainted with theirinformation to assure proper use of this product.Manual and Warranty Card thoroughly before use.Keep them in safe place close to this Equipment sothat you can refer to them any time.Warning: Please read the important warning notes in thisManual carefully and thoroughly, and get thegood understanding of their contents beforeusing this Equipment.Yamato Scientific America,Inc.Printed on recycled paperTable of ContentsExplanation ofsymbols（Never operate in an atmosphere where flammable or explosive gas is present.ever operate this Equipment in an atmosphere where flammable or explosive Must connect grounding wire properly.Turn the power off when an abnormality occurs.When it begins to thunderHandle Power Cord/Power Cable carefully.ever operate this Equipment at bundled Power Cord/Power Cable. May heatOils to be usedProhibition of no-oil heatinglways use the product with the bath filled to 70% with oil. Do not touch any portions other than the operating parts.Do not lift the product with the burn protective sheet.Handling of oilHandling of the power cordbring the powerWhen the product is not to be used for a long time Select a place with less humidity and dust.After installationOverheat preventionMixing with the mug mixerf the stirring bar is in direct contact with the bath bottom during use whileExternal view and name of parts＊An example with the burn protective sheet attached Heater signalTemperature controller DOWN key (-) Power lamp Power switch Set temperature Fuse Reset VR (do not operate)Temperature controller UP key (+)Bath insideφ240 x H1300mmHeater insidediameterφ190Thermometer clampOperating procedure (see the figure in the previous page)1. I nstall the burn preventive sheet included in the accessories.2. F ill the bath with silicon oil. Fill to keep minimum 70% (equivalent to about 4.1 liter) of the bathvolume.3. W hen using the product placed on the mug mixer, be sure to place it in the middle of stirringtable.Note) This product does not incorporate the stirring system. The use of this product while mixing with the mug mixer ensures the uniform and stable temperaturesinside the bath.4. I f necessary, insert your bar thermometer into the thermometer clamp.Note) If the thermometer is to be used, it must be able to measure the temperatures up to 200 C,5. C onfirm that the power switch is OFF and insert the power cord.6. S et the temperature controller to the temperature to be used.Press the UP key (+) of temperature controller to increase the value and the DOWN key (-) to decrease the value. The controller can set the temperatures from 0 C (the switch indication “000”) to 199 C (the switch indication “199”),Note) T he hundred’s place can be set to 0 to 9. Note that setting the even numbers (2, 4, 6, and 8) is equivalent to setting of “0” while setting the odd numbers (1, 3, 5, 7,and 9) is equivalent to setting of “1.”Example: Numerical figure 690 – Setting 90 CNumerical figure 950 – Setting 150 C7. W hen the mug mixer is used, put in the stirring bar to ensure uniform oil temperatures.8. T urn ON the power switch. The power lamp and the heater signal go ON and the heatersignal starts flashing when the set temperature is reached.9. A fter use, turn OFF the power switch, and disconnect and store the power cord.After sales service and warrantyRequest to repair partsStop operation immediately, turn Earth Leakage Breaker (ELB) off, disconnect Power Cord or turn facilities breaker off for Power Cable, if any trouble occurs.Contact with local dealer, Yamato sales office, or Yamato Customer Service Center.(Require the following information for repair.)●Model name of Yamato products●Serial Number●Date (year/month/date) of purchase(seeto the warranty card or the nameplate ofthe unit)●Description of trouble in detail aspossibleBe sure to present the warranty card to Yamato service representative.Warranty Card (attached separately)●Keep Warranty Card with care.Warranty Card would be given by local dealer or one of Yamato sales offices.Date of purchase of this Equipment and other information should be filled in Warranty Card. Then, keep warranty Card with good care.●Repair this Equipment for free of chargeaccording to the contents on Warranty Card. Warranty period is 1(one) year from date of purchase.●Consult with local dealer, one of Yamatosales office or Yamato CSC for any repair after warranty ended. Charged repair service of this Equipment will be available on customer’s request when it can be maintained functional by its repair. Guarantee for maximum storage period of repair parts.Guarantee that maximum storage period of repair parts will be 7(seven) years after end of their production, Oil bath BO500.Repair parts will be defined the parts to maintain this Equipment performance.Symptom CheckThe display of operation panel does not go ON even when the power switch is turned ON. ●Check if the power cord is firmly connected to the socketoutlet or the distribution panel.●Check for power failure.Temperature changes during operation ●Check if the environment temperature variessubstantially.。

Ultracompact 2.4GHz Dual-Channel Wireless Microphone System Blink500User ManualGeneral IntroductionThe Saramonic Blink500 is an incredibly lightweight, ultracompact and easy-to-use 2-person wireless microphone system for DSLR, Mirrorless and Video cameras, or mobile devices that delivers detailed, broadcast-quality sound.The system series is comprised of three different receivers. The RX receiver has a 3.5mm output and includes TRS and TRRS output cables, allowing it to work with any device with a 3.5mm audio input. The RXDi receiver has a MFi Certified Lightning output and is designed for Apple iOS devices. And the RXUC receiver has a USB-C output and is designed for devices with a USB-C port, including Android smartphones and tablets. The clip-on transmitter has a great sounding built-in mic and it is small and light enough to clip to shirts and clothing, or you can use it as a traditional beltpack transmitter with the included SR-M1 professional lavalier microphone.No technical knowledge of audio is required to operate. The Blink500 system operates on the interference-free 2.4GHz spectrum and automatically hops to free channels to avoid static noise and audio dropouts.There are six kits available in the Blink500 series:Blink500 B1(TX+RX)Blink500 B3(TX+RXDi)Blink500 B5(TX+RXUC)1×Blink500 RXUC① Power KeyLong press to turn on or off the receiver.② Power and Pairing Indicator Power Functions:Solid Red Light = Low BatteryPairing Functions:Flashing Blue Light (every one second) = UnpairedQuick Flashing Blue Light (every 0.5 second) = Waiting for PairingSolid Blue Light = Paired SuccessfullyOnce the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.③ USB Type-C Charging PortProduct Structure1. Blink500 RX: Clip-On and Shoe-Mountable Receiver④ Charge IndicatorSolid Green Light = Charging Battery Light turns off when fully charged.⑤ Line OutConnect the receiver to a DSLR or Mirrorless camera, camcorder, smartphone, tablet, mixer or amplifier with the supplied output cables.⑥ Pairing Pin-Hole⑦ Belt Clip and Standard Cold Shoe Mount 2. Blink500 RXDi: Lightning Receiver① Lightning Connector② Pairing IndicatorFlashing Blue Light (every one second) = UnpairedQuick Flashing Blue Light (every 0.5 second) = Waiting for PairingSolid Blue Light = Paired Successfully12① USB Type-C Connector② Pairing IndicatorFlashing Blue Light (every one second) = UnpairedQuick Flashing Blue Light (every 0.5 second) = Waiting for PairingSolid Blue Light = Paired SuccessfullyOnce the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.③ Pairing Pin-Hole ④ Antenna① Power KeyLong press to turn on or off the transmitter.② Power Indicator, Volume Indicator and Pairing Indicator Power Functions:Solid Red Light = Low Battery When charging:Solid Green Light = Charging Battery Light turns off when fully charged.Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.③ Pairing Pin-Hole ④ Antenna3. Blink500 RXUC: USB-C Receiver4. Blink500 TX: Body-pack Transmitter with Microphone④ USB Typc-C Charging Port⑤ Belt Clip and Standard Cold Shoe Mount⑥ Volume Control Buttons & Pair Buttons Operation GuideFor the Blink500 B1/B2 kit1. Turn on the transmitter TX by long pressing the power key.2. Turn on the receiver RX by long pressing the powerkey.3. Insert the pairing pin into the pairing pin-hole of RX,press hard and the pair indicator should be quickflashing at every 0.5s. Press both the “+” and “-” button of transmitter TX simultaneously within 10 seconds.4. The kit will be paired when the RX pair indicator is solidblue and the TX pair indicator is flashing slowly.Note:To pair the second transmitter TX, just repeat the step 3 and 4.5. Connect the receiver RX to the mic jack of a camera,camcorder, recorder or mixer with the supplied 3.5mm TRS audio cable. Or connect the RX to a smartphone or tablet with the supplied 3.5mm TRS to TRRS audio cable.6. You are ready to record.N ote: The output of receiver RX is line out. You can connect it to speaker system. To avoid noise during connection, before connecting the receiver to a speaker system, please mute the speaker system and do not use the headphones.For the Blink500 B3/B4/B5/B6 kit1. Turn on the transmitter by long pressing the power key.2. Plug the RXDi into an iOS device or the RXUC into an USBType-C device. Please make sure the antenna (yellowside) is oriented on the top of the device, when inlandscape mode, to get the best signal.Volume Functions:Indicates the volume setting in three stages.Adjust the audio level by the “+”and “-” buttons.Default is in the third stage.The transmitter mic will be mutedif you turn down the volume till allthe lights are turned off.Flashing Blue Light (every onesecond) = UnpairedSlow Flashing Blue Light (everythree seconds) = PairedSuccessfullyTransmission Type 2.4GHz Digital Frequency Modulation GFSKOperating Range Up to 164' (50m)Audio Output Connector MFi Certified Lightning Connector Power Requirement Supplied by iOS Device Built-in Battery Life Approx. 6 hours Antenna PIFA Antenna WeightApprox. 11g (0.38oz)Dimensions76×16.5×11mm Operating Temperature 0°C to 50°C Storage Temperature–20°C to +55°CTransmission Type 2.4GHz Digital Frequency Modulation GFSKOperating Range Up to 164' (50m)Audio Output Connector USB-C ConnectorPower Requirements Supplied by USB-C Devices Built-in Battery Life Approx. 6 hours Antenna PIFA AntennaWeight Approx. 10.5g (0.37oz)Dimensions76×16.5×11mm Operating Temperature 0°C to 50°C Storage Temperature–20°C to +55°C3. Insert the pairing pin into the pairing pin-hole of RXDi or RXUC, press hard and the pair indicator should be quick flashing at every 0.5s. Press both the “+”and “-” button of transmitter TX simultaneously within 10 seconds.4. The kit will be paired when the RX pair indicator is solid blue and the TX pair indicator is flash slowly.Note: To pair the second transmitter TX, just repeat the step 3 and 4.5. You are ready to record.SpecificationTransmission Type 2.4GHz Digital Frequency Modulation GFSKOperating Range Up to 164' (50m)Audio Output Connector 3.5 mm JackAudio Output level –60 dBVPower Requirements Built-in Li-ion Battery or USB-C DC 5V Built-In Battery Life Approx. 6 hoursAntenna PIFA AntennaWeight Approx. 26.5g (0.93oz) Dimensions62×33×15.5mmOperating Temperature 0°C to 50°CStorage Temperature–20°C to +55°C Transmission Type 2.4GHz Digital Frequency Modulation GFSKOperating Range Up to 164' (50m)RF Output Power10mWPolar Pattern OmnidirectionalFrequency Response50Hz-18KHzMaximum SPLBuilt-in Microphone:120dB SPLLavalier Microphone: 110dB SPLSensitivity Built-in Microphone: -42dBLavalier Microphone: -30dBSNR> 78dBPower Requirements Built-in Li-ion Battery or USB-C DC 5V Built-in Battery Life Approx. 6 hoursAntenna PIFA AntennaAudio InputsWeight Approx. 34g (1.2oz)Dimensions63×43×16.5mmOperating Temperature 0°C to 50°CStorage Temperature –20°C to +55°C3.5mm TRS Lavalier Microphone Inputor Built-in MicrophoneBlink500 RXUC1× Blink 500 RXUC Receiver with USB-C Connector 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B1(TX+RX)1× Blink500 RX Receiver with Built-In Clip and Camera Shoe-Mount1× Blink500 TX Transmitter with Built-In Microphone and Clip 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables 1× SR-M1 Omnidirectional Lavalier Microphone 1× Alligator-Style Lavalier Microphone Clip 1× Foam Lavalier Windscreen 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B2(TX+TX+RX)1× Blink500 RX Receiver with Built-In Clip and Camera Shoe-Mount2 × Blink500 TX Transmitters with Built-In Microphone and Clip 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets3× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging CablesPacking ListBlink500 RX1× Blink500 RX Receiver with Built-In Clip and Camera Shoe-Mount1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 TX1× Blink500 TX Transmitter with Built-In Microphone and Clip 1× SR-M1 Omnidirectional Lavalier Microphone 1× Alligator-Style Lavalier Microphone Clip 1× Foam Lavalier Windscreen1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 RXDi1× Blink 500 RXDi Receiver with MFi Certified Apple Lightning Connector 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B5(TX+RXUC)1× Blink500 RXUC Receiver with USB-C Connector1× Blink500 TX Transmitter with Built-In Microphone and Clip 1× SR-M1 Omnidirectional Lavalier Microphones 1× Alligator-Style Lavalier Microphone Clip 1× Foam Lavalier Windscreen1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B6(TX+TX+RXUC)1× Blink500 RXUC Receiver with USB-C Connector2× Blink500 TX Transmitters with Built-In Microphone and Clip 2× SR-M1 Omnidirectional Lavalier Microphones 2× Alligator-Style Lavalier Microphone Clips 2× Foam Lavalier Windscreens2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables 1× Pairing Pin 1× Warranty Card 1× User Manual2× SR-M1 Omnidirectional Lavalier Microphones 2× Alligator-Style Lavalier Microphone Clips 2× Foam Lavalier Windscreens 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B3(TX+RXDi)1× Blink500 RXDi Receiver with MFi Certified Apple Lightning Connector1× Blink500 TX Transmitter with Built-In Microphone and Clip 1× SR-M1 Omnidirectional Lavalier Microphone 1× Alligator-Style Lavalier Microphone Clip 1× Foam Lavalier Windscreen1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable 1× Pairing Pin 1× Warranty Card 1× User ManualBlink500 B4(TX+TX+RXDi)1× Blink500 RXDi Receiver with MFi Certified Apple Lightning Connector2× Blink500 TX Transmitters with Built-In Microphone and Clip 2× SR-M1 Omnidirectional Lavalier Microphones 2× Alligator-Style Lavalier Microphone Clips 2× Foam Lavalier Windscreens2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables 1× Pairing Pin 1× Warranty Card 1× User ManualThe RX/TX cannot be turned on The battery is very low.The transmitter TX is muted.Adjust the sound by the “+” and “-” buttons. The transmitter and receiver is not paired.The audio cable is not fully plugged in.Pair the system. Refer to the “Operation Guide.”Re-plug the audio cable.Charge the RX/TX with the supplied charging cable.The battery become drained quicklyThere is no soundThe device is being used under cold or hot conditions.Recharge or move to less cold or hot enviornment.The transmitter volume setting is too low.Adjust the volume, the goal is to transmit thehighest level in the entire signal path without distortion to get the highest signal to noise ratio.The sound is weakThe Blink500 TX built-in microphone is omnidirectional.The microphone may pick up more ambient sounds.Please make sure the microphone is as close as possible to the subject being shot.There is too much ambient noise is picked upSignal is interfered.The RF signal is weak.The input level of the camera, recorder or mixer is too high.The volume of the transmitter is too high.1. Make sure that the line of sight between the transmitter and receiver antennas is unobstructed.2. Your body, clothes, and stage set may be a hindrance.3. If there are obstacles, you need to shorten the distance between the transmitter and the receiver.There is soundinterruption or noiseTransmitter/receiver volume setting is not suitable.Adjust the volume, the goal is to transmit the highest level in the entire signal path without distortion to get the highest signal to noise ratio.Using a mono plug headphone.Please use the headphone with stereo plugThe sound is distortedCommon Technical Issues and SolutionsIf you encounter problems when using the Blink500 system, please refer to the follow checklist beforecontacting technical support. If the problem cannot be solved, please contact the dealer's after-sales service department.Turn down the audio input level of the camera orrecording device. Turn down the gain of mixer.Lower the volume to the second stage.1. Adjust the angel of transmitter/receiver.2. There is more radio frequency interference outdoors. Try to move the recording indoors.3. Be away from conductive objects such as metal and water.4. Overhead telephonelines, fluorescent lights, and metal fences may interfere with wireless microphones.5. Turn off all nearby computers and phones.Saramonic is a trademark registered and owned by Shenzhen DSQN Investment CO., LTD. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN )Room 2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang District, Shenzhen,China518129Email:******************Made in China。

BW 无线系统操作说明书产品特点：覆盖距离可达150米（500英尺）和定向碟形天线一起使用，则覆盖距离可达500米（1500英尺）传送多格式信号，最高达1080 /60P（3G，HD-SDI）低延时（20ms）通过音频输入端口将音频独立传输双向数据链路11Kbps时间代码传送Tally 传输，Tally LED，通过GPI接口返回Tally 传输低功耗（10W0）无需FCC许可证要求的（U-NII-1和U-NII-3）部件说明1)V板适配器用于V型电池安装的内置V板，安顿保尔适配器可连接2）V-Mount适配器V-Mount适配器用于连接V-Mount电池，替代了DV Mount，双DV Mount，或安顿保尔适配器。

3）内置电源接口DV Mount连接此接口供电4）更新接口通过迷你USB gender.接口更新固件发射器侧面板左测面板1)环路输出SDI环通输入端口2）SDI输入支持SMPTE标准音频信号的HD/ SD SDI输入端口。

3）HDMI输入端口HDMI输入端口（有音频信号），请注意，某些数码单反相机不能通过外部端口发送音频信号。

4）电源开关5）Mini USB端口用于固件更新，更新前，用户可通过我们的服务代表获取帮助。

6）直流电源输入端口12V直流电源输入接口，7~30V也可用。

右侧面板1)配对按钮当发射机和接收机配对不成功，或使用不同型号的发射机和接收机时需按下此按钮，通常用户不需要按下此按钮。

2）Link LED指示灯发射器和接收器连接上成功，此灯亮起。

3)电源指示灯4)电池指示灯电池容量低，此灯闪烁5）Tally LED指示灯当Tally 控制被使用时，此灯亮起6）SDI/HDMI选择切换选择SDI或HDMI输入7）音频输入接口此端口接收立体声音频（例如来自麦克风）、从视频端口分离出来的输入音频。

8）远程端口此端口接收tally控制信号9）红外线遥控端口遥控接收端口接收器侧面板左侧面板1) SDI 输出接口12) SDI 输出接口23) HDMI 输出接口4) 电源开关5) Mini USB 端口特殊固件更新端口6）直流电源端口12V交流电源输入接口，7~30V也可用。

BW-500型电子称重式锅炉给煤机微机控制设备使用说明书北京电力自动化设备厂北京电力设备总厂2005年12月目录1. 概述2. 接线说明3. 上电开机4. 给煤机首次运行步骤4.1 用变频器调节皮带驱动马达的转速4.2 以“西门子”积算器的手动设定方式调节皮带马达转速4.3 以集控室远方给定方式调节皮带马达转速5. “西门子”积算器的标定6．变频调速器的操作要点7．给煤机皮带调速方式8．给煤机逻辑控制部分的使用说明8.1 报警8.2 原煤阀的操作8.3 清扫机的操作8.4 油系统的操作8.5 给煤机的启/停及紧急停止8.6 给煤机保护8.7 其它9. 常见故障及措施BW-500型电子称重式锅炉给煤机微机控制设备使用说明书1. 概述BW-500型控制设备是火电厂制粉系统中给煤机的配套控制设备。

在整个给煤机的运行、维护过程中，除需详见本说明书外，还需和给煤机本体的使用说明配合使用。

BW-500型电子称重式给煤机微机控制柜(以下简称控制柜)的面板布置参见面板布置图，在阅读本说明书前请按此图熟悉各仪器、按钮、指示灯等部件的位置。

本控制设备以控制柜中的“西门子”(BW500)积算器、“西门子”(MM440/2.2)变频器和“西门子”(S7-200)可编程控制器为核心。

在阅读本说明书和操作中，如遇不详之处，请参见随机资料中这些仪器的使用说明。

在阅读本说明书、以及具体操作前，最好对这些仪器的使用有所了解。

2. 接线说明本控制设备中，所有的接入接出线都在控制柜的接线端子上。

每个端子名称及接线方法见端子排出线图。

整个接线回路如下图1所示。

←────→←────→图1接线回路接线说明：(1) 三相四线动力电和控制柜的连接必须在其它线接好后，最后来接，且在接通前，必须将控制柜中总电源开关断开。

(2) 在控制柜下部，贴有接地标记的端子必须良好接地。

(3) 各端子用线规格参见端子排出线图中的标注。

(4) 集控室所需连接信号可按各使用单位情况而定,但控制柜中30、31端子的给煤率给定值必须接上4～20mA信号。

BW-500型电子称重式锅炉给煤机微机控制设备使用说明书北京电力自动化设备厂北京电力设备总厂2005年12月目录1. 概述2. 接线说明3. 上电开机4. 给煤机首次运行步骤4.1 用变频器调节皮带驱动马达的转速4.2 以“西门子”积算器的手动设定方式调节皮带马达转速4.3 以集控室远方给定方式调节皮带马达转速5. “西门子”积算器的标定6．变频调速器的操作要点7．给煤机皮带调速方式8．给煤机逻辑控制部分的使用说明8.1 报警8.2 原煤阀的操作8.3 清扫机的操作8.4 油系统的操作8.5 给煤机的启/停及紧急停止8.6 给煤机保护8.7 其它9. 常见故障及措施BW-500型电子称重式锅炉给煤机微机控制设备使用说明书1. 概述BW-500型控制设备是火电厂制粉系统中给煤机的配套控制设备。

在整个给煤机的运行、维护过程中，除需详见本说明书外，还需和给煤机本体的使用说明配合使用。

BW-500型电子称重式给煤机微机控制柜(以下简称控制柜)的面板布置参见面板布置图，在阅读本说明书前请按此图熟悉各仪器、按钮、指示灯等部件的位置。

本控制设备以控制柜中的“西门子”(BW500)积算器、“西门子”(MM440/2.2)变频器和“西门子”(S7-200)可编程控制器为核心。

在阅读本说明书和操作中，如遇不详之处，请参见随机资料中这些仪器的使用说明。

在阅读本说明书、以及具体操作前，最好对这些仪器的使用有所了解。

2. 接线说明本控制设备中，所有的接入接出线都在控制柜的接线端子上。

每个端子名称及接线方法见端子排出线图。

整个接线回路如下图1所示。

←────→←────→图1接线回路接线说明：(1) 三相四线动力电和控制柜的连接必须在其它线接好后，最后来接，且在接通前，必须将控制柜中总电源开关断开。

(2) 在控制柜下部，贴有接地标记的端子必须良好接地。

(3) 各端子用线规格参见端子排出线图中的标注。

(4) 集控室所需连接信号可按各使用单位情况而定,但控制柜中30、31端子的给煤率给定值必须接上4～20mA信号。