TC3000浊度色度余氯检测仪雷曼TC3000

TDS3000C 系列您需要的性能，您承受得起的价格以经济的价位提供您需要的性能TDS3000C 系列数字荧光示波器(DPO)以经济的价位为您提供了所需的性能。

TDS3000C 提供了100 MHz- 500 MHz的带宽及高达5 GS/s 的采样率，可以准 确地表示信号。

DPO 可以更全面地查看复杂的信号为解决问题， 首先必需看到问题。

TDS3000C 系列提供了3,600 wfms/s 的 连续波形捕获速率及实时辉度等级，使 您能够看到并解决问题。

快速连续波形捕获速率可以迅速揭示问 题特点，进而应用高级触发隔离问题，节 约大量的时间。

实时辉度等级突出显示与信号活动历史有关的细节，可以更简便地了解捕获的波形特点。

与其它类似示波器不同，即使在采集停止后，它仍能保留历史数据。

使用DRT 采样技术和Sin(x)/x 内插功能迅速调试和检定信号TDS3000C系列融独特的数字实时(DRT)采样技术与sin(x)/x 内插功能于一身，可以在所有通道上同时精确地检定各种信号类型的特点。

与其它类似示波器不同，在打开额外的通道时，TDS3000C 系列的采样率没有变化。

这种采样技术可以捕获其它同类示波器可能会漏掉的高频信息，如毛刺和异常边沿，sin(x)/x 内插保证了可以精确地重建每个波形◆主要特点和优点主要性能指标100 MHz, 300 MHz 和500 MHz2 条或4 条通道在所有通道上实现高达5 GS/时采样率在所有通道上标配10 k 记录3,600 wfms/s 连续波形捕获高级触发套件简便易用功能前面板USB 主机端口，简便和传送测量数据25 种自动测量功能标配FFT多语言用户界面WaveAlert® 异常波形自动检TekProbe® 接口支持有源探分探头和电流探头，自动定定单位便携式设计轻便的设计(仅7 磅/3.2 公斤携带选配内置电池，在没有供电情况下最长可以工作三个小专用分析应用模块高级分析模块极限测试模块通信模板测试模块扩展视频模块601 串行数字视频模块◆应用数字设计、调试和测试视频安装和服务电源设计教育和培训通信模板测试制造测试通用工作台测试TDS3000C 系列设置和使用简便在时限紧张时，您需要示波器直观易用， 您想最大限度地减少学习和重新学习使 用示波器的时间。

Order OnlineOver 100,000 Products Available! ®G-10To download information and to order Water and SoilInstrumentation products online, visitU E PA (USEPA 180.1) and ISO (ISO 7027) Compliant for Turbidity U F or Field and Lab Use U I ndustry Leading Precision Using Focusing Optics U A ll in One: Measures Turbidity, Chlorine, and Color U U ser-Friendly Calibration and Operation U Micro-Processor BasedThe TRI-3000 is a compact water analysis instrument designed for precision measurements of turbidity, chlorine and color. The meter is equipped with an advanced microprocessor to a drive a six detector optical sensing system that permits long-term stability over a wide range of operational conditions.With its low level precision and accuracy, the TRI-3000 permits EPA or ISO compliant measurements for water and wastewater analysis. The TRI-3000 has a wide detection range from 0 to 4000 NTU for turbidity, 0 to 10 ppm for chlorine, and 0 to 500 cU for color.Other features on this all-in-one meter include automatic range selection, signal averaging, data logging up to 4000 points, RS232 interface port and language selection.Supplied with a 9V alkaline battery, the TRI-3000 is an ideal choice for regulatory monitoring, process water testing, and environmental water analysis in the field or laboratory.TRI-3000Portable Turbidity, Chlorine and Color MetersTRI-3000-ESpecificationsTurbidity:Units: NTU, FNU, FAU, ASBc, EBc Range: 0 to 4000Resolution: 0.01 NTU (0 to 10.99); 0.1 NTU (11.00 to 109.9); 1 NTU (110 to 4000) Accuracy: ±2%Detection Limit: 0.05 NTU Chlorine:Range: 0 to 10 ppmResolution: 0.01 ppm (0 to 5) Accuracy: 0.02 or ±2% Detection Limit: 0.02 ppm Color:Range: 0 to 500 cUResolution: 0.1 cU (0-99.9) Accuracy: ±0.5 cU or 2% Detection Limit: 0.2 cUCommon SpecificationsDisplay: 31/2-digit LcDResponse Time: Approx. 5 seconds Signal Averaging: Disabled, 2, 5, 10Power: 9V battery (included)Auto Shut-Off: Disabled, 5, 10, 30Serial Interface: RS232Comes complete with meter, 0, 1, and 10 NTU standards, sample bottle, 4 sample tubes, 100 DPD #1 tablets, 100 DPD #3 tablets, rugged waterproof carrying case, 9V battery and operator’s manual.Ordering Examples: TRI-3000-E, turbidity, chlorine and color meter for USEPA.TRI-3000-I, turbidity, chlorine and color meter for ISO 7027.TRB-1485 10 NTU standard (EPA), 60 mL WTCL2-6197A c hlorine DPD #3 instrument grade tabletsAccessories。

UltiMate 3000 系列T-3X00柱温箱 操作手册戴安中国有限公司技术服务中心2006.5目 录1. 概述 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 32. 操作原理 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 33. 仪器构造 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 34. 安装 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 85. 用户界面 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 176. 软件控制 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 247. 故障 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 298. 维护 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 339. 技术指标 ﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒﹒ 351． 概述柱温箱用于HPLC日常分析，尤其适用于Dionex UltiMate 3000 系统，它能用于许多实验室环境， 设计时充分考虑最小死体积和最大效率最优化，柱温箱能加热和冷却到仪器设定的温度，使用加热交换器，能快速改变温度，获得独立于室温的温度，甚至当温度设定点低于室温时，柱温箱允许元器件从室温冷却到最大18K的温度。

柱温箱最低温度限为+5°C (+41°F)，最大温度限为+85°C (+185°F)，温度由20°C 升至 50°C (即68°F 到 122°F)在15min内就可以实现平衡。

在分析过程中加热和冷却时，温度控制器保持柱温恒定，最大误差为± 0.1°C。

柱箱室提供的空间可容纳六根不同长度的柱子（最大30cm），柱识别电子模块允许GLP储存柱文件类型及色谱柱的一些重要参数（见色谱柱识别系统)。

柱温箱可配置一或二个柱转换阀，在同一个温度时可频繁转换到不同的色谱柱。

洗梯液预处理器做为一个选配件，它安装在柱箱中，放在色谱柱之前，它可以避免色谱柱的梯度柱温。

柱温箱能完全由Chromeleon色谱管理系统软件控制，柱温箱表面的材料都能抵抗大多数常用的HPLC溶剂腐蚀。

余氯检测仪使用方法
1. 准备工作：将余氯检测仪取出，检查是否有明显损坏或污垢，充好电。

2. 打开仪器：按下界面上的开机键，仪器开机。

进入主界面后，选择“余氯检测”功能。

3. 校准仪器：在使用之前，需要校准仪器。

将仪器浸入标准液中，按照仪器说明书的指示进行校准。

4. 进行检测：将测量头浸入待测溶液中，待仪器稳定后读数。

如需连续测量，可按照仪器说明书进行设置。

5. 记录结果：记录测量结果，并及时上传到数据中心或导出到电脑等存储设备中，以备后续分析使用。

6. 关机：使用完毕后，按下关机键，仪器自动关闭。

将仪器收好，妥善保存。

操作说明书Chlorine 3000(在线余氯测试仪)目录1 概述 (4)1.1 装箱清单 (4)1.2 显示屏及显示内容 (4)1.3 按键 (4)2 安全条款 (5)3 工作原理 (7)4 安装和调试 (8)4.1 选择合适的地点安装仪器 (8)4.2 电气连接 (8)4.2.1 电源线 (10)4.2.2 连接RS485输出 (10)4.2.3 连接继电器输出 (10)4.2.4 连接4-20 mA输出 (10)4.2.5 防干扰磁铁 (11)4.3 管路连接 (11)4.4 配制试剂 (12)4.5 连接试剂管路 (13)4.6 流速调节 (13)5 操作 (15)5.1 测试步骤 (15)5.2 密码保护 (16)5.3 白色LED灯 (16)6. 校正 (17)6.1 斜率校正步骤 (17)6.2 零点校正步骤 (18)6.3 复位 (19)7 设置 (19)7.1 设置4-20 mA输出信号 (19)7.2 设置故障时的输出信号 (20)7.3 设置RS 485数字信号 (20)7.4 设置警报继电器 (21)7.4.1 设置继电器1 (21)7.4.2 设置继电器2 (22)7.5 启动密码保护功能 (22)7.6 其它更多的设置 (22)7.6.1 响应速度 (22)7.6.2 屏幕背光亮度 (23)7.6.3 设置RS 485参数 (23)7.6.4 设置测试周期时间 (24)7.7 存贮设置值 (24)8. 其它功能介绍 (25)8.1 RS 485输出 (25)8.1.1 简单的通讯模式 (25)8.1.2 Modbus通信 (25)9 故障排除 (25)9.1 故障分类 (25)9.2 清除故障 (26)9.3 试剂堵塞 (26)9.4 故障诊断表 (27)10日常维护 (27)10.1 保养周期 (27)10.2 更换试剂 (29)10.3 阀门冲洗工具包 (30)10.4 更换比色管 (31)10.5 仪器贮存 (31)10.6 仪器清洗 (31)11 技术参数 (32)12 备品备件 (33)关于本手册内容的正确性我们采用先进的技术，不断开发新的仪器。

版 权 信 息● 优利德科技(东莞)有限公司版权所有。

● 产品受中国或其它国家专利权的保护，包括已取得或正在申请的专利。

● 本公司保留更改产品规格和价格的权利。

保留所有权利。

许可软件产品由UNI-T、及其子公司或提供商所有，受国家版权法及国际条约规定的保护。

本文中的信息将取代所有以前出版的资料中的信息。

是优利德科技（东莞）有限公司[Uni-Trend Technology (Chengdu) Limited]的注册商标。

如果原购买者自购买该产品之日起三年内，将该产品出售或转让给第三方，则保修期应为自原购买者从UNI-T 或授权的UNI-T分销商购买该产品之日起三年内。

探头及其它附件和保险丝等不受此保证的保护。

如果在适用的保修期内证明产品有缺陷，UNI-T可自行决定是修复有缺陷的产品且不收部件和人工费用，或用同等产品（由UNI-T决定）更换有缺陷的产品。

UNI-T作保修用途的部件、模块和更换产品可能是全新的，或者经修理具有相当于新产品的性能。

所有更换的部件、模块和产品将成为UNI-T的财产。

以下提到的“客户”是指据声明本保证所规定权利的个人或实体。

为获得本保证承诺的服务，“客户”必须在适用的保修期内向UNI-T通报缺陷，并为服务的履行做适当安排。

客户应负责将有缺陷的产品装箱并运送到UNI-T指定的维修中心，同时预付运费并提供原购买者的购买证明副本。

如果产品要运送到UNI-T 维修中心所在国范围内的地点，UNI-T应支付向客户送返产品的费用。

如果产品送返到任何其他地点，客户应负责支付所有的运费、关税、税金及任何其它费用。

本保证不适用于由于意外、机器部件的正常磨损、在产品规定的范围之外使用或使用不当或者维护保养不当或不足而造成的任何缺陷、故障或损坏。

UNI-T根据本保证的规定无义务提供以下服务：a) 修理由非UNI-T 服务代表人员对产品进行安装、修理或维护所导致的损坏；b) 修理由于使用不当或与不兼容的设备连接造成的损坏；c) 修理由于使用非UNI-T 提供的电源而造成的任何损坏或故障；d) 维修已改动或者与其他产品集成的产品（如果这种改动或集成会增加产品维修的时间或难度）。

Inspired by contractors.Typical 14 hourrun time with standard Li-Ion rechargable or use 4x AA batteriesor AC power .Organize records in folder structure for later viewing and downloads.1000 Memory2- Holds up to 4 sensors at once.- Automatic Sensor Protection.- CO-H2 compensatedof 10,000 ppm.- Smart Sensors: Includes a chip to tell the instrument the gas and calibration curve.Advanced®and easy-to-see results.Large Color text, bar graph, tile or trending format making it easier to interpret results.Enhanced Data Includes common fuels like natual gas, oil, propane and kerosene.10 Standard Fuels cal gases with simple, pre-cali-brated sensor exchange using Near Field Communication (NFC).B-SMART ®Pre-Calibrated PRODUCT SHOWN ACTUAL SIZEPCA 400 Portable Combustion & Emissions Analyzeror VITON TM tubing formost accurate NOx and SOx measurements.Sample Lineextended 15 ft sample lines.Sample Line Length OptionsInspired By Contractors.You spoke. We listened. SoBacharach delivered the PCA 400, an easy-to-use, feature-rich industrial combustion analyzer.Designed By Bacharach.The PCA 400 was designed for a wide variety of combustion applications. Whether tuning boilers or spot-checkingemissions, it provides accurate,reliable, repeatable results in a cost-effective package.Built on Reputation.Bacharach’s reputation includes over 100 years of American made products and ingenuity. This foundation combined with our extensive combustion analysis experience, brings the PCA 400 to life.Provides a quick, simple robust con-nection to the analyzer.4Data can be viewed in list (text), tile, bar graph and trending formats to easily analyze yourinformation and results. You can further customize the PCA 400 to show all the parameters in the order you prefer.Enhanced Data Viewing CapabilitiesTHE COMPLETE SOLUTION . . . FOR PORTABLEThe PCA 400 provides accurate readings for CO, O NO with our standard probe. Optional Viton and thermo-electric sample conditioner ensure accu-rate results in any application including NO measurements.Sample Conditioning for Accurate Measurements1Windows PCs, Android and iOS devices only. See website for details.5Rugged and ReliableDesigned for commercial and industrial environments, the PCA 400 is rugged and reliable for everyday use. With a rugged one-step probe connection and automatic sensor protection to extend the safe operating range the PCA 400 remains ready at your side.Bacharach’s B-SMART™ pre-calibrated sensorseliminate field calibrations. or allow the user to add a new sensor type in the field. With NFC technology, in -stalling a B-SMART™ sensor takes just a few seconds. The B-SMART™ exchange program is available so you don’t have to remember when your instrument needs calibration.B-SMART™ Pre-Calibrated Sensors Easy to Service and MaintainThe PCA 400 is designed to make maintenance easy. With quick access to sensors, batteries, probes and other consumable parts, cost of ownership and down time are significantly reduced.Multiple Sensor OptionsThe PCA 400 can be configured with up to 4 gas sensors. Pick from the CO-H 2 compensated or CO high-range sensor, then add NO, NO 2 and SO 2 asneeded. NOx is calculated from the NO reading if NOx and SOx are both required.COMBUSTION AND EMISSION ANALYSISHigh-Flow Pump with Fresh Air PurgeFor the toughest applications the PCA 400 has options to enable a higher pump flow and perform fresh air sensor purges while the probe is still in the flue.6From commercial boilers to the oil and gas industry —Bacharach’s PCA 400 is designed for you.The PCA 400 is perfect for spot-checking and tuning your engines with the high range CO sensor (with dilution capabilities for CO of up to 80,000 ppm ensuring the sensor is not overranging) and available sample conditioner. Whether it’s natural gas, stationary gensets or mobile diesel fleet vehicles, monitoring your emissions is fast, easy and accurate.ENGINES:The PCA 400 offers you everything you and your technicians need to commission,tune, maintain and certify any boiler, anywhere. With customized reporting and a simple user interface, boiler tuning and commissioning has never been so simple.COMMERCIAL AND INDUSTRIAL BOILERS:Whether gearing up for a compliance test or doing a quick spot check, the PCA 400 is always at the ready. Bluetooth ® data streaming and customizable reporting options provide all of the necessary information for reliable test reporting.MIDSTREAM OIL AND GAS:SPECIFICATIONSATTRIBUTE DESCRIPTIONDisplay 4.3 in. (10.9 cm) color touch panel LCDPower Rechargeable Li-Ion battery pack, 4x AA batteries or wall adapter (5V USB)Run Time 12 to 14 hours (typical, w/ included LI-Ion battery pack)Size (HxWxD) 10 x 3.8 x 2.5 in, (25.4 x 9.7 x 6.4 cm)Weight 1.5 lb. (0.68 kg) w/ Li-Ion battery packFuels (1) Natural gas, coal, oil 2-4 or 6, propane, wood/biofuel, kerosene, bagasse, digester gas, B5, pellets, KOKS, LEG, LPG,butane, wood chips Warm-up Time 60 secondsMemory1,000 sets of recordsCommunications USB 2.0 (micro-B), IrDA, Bluetooth ® 4.0 Approvals CE MarkWarranty2 years for instrument, 5 years for O 2 sensor Sample Flow Rate 0.6 to 0.7 L/min (standard)1.0 L/min (high flow mode)Storage Conditions 20 to 50° C (-4 to 122° F), 15 to 90% RH, non-condensing, 1 Atmosphere ± 10%,Normal Operating 0 to 45° C (23 to 113° F), 15 to 95% RH, non-condensing, 1 atmosphere ± 10%,Conditions(1)Depending upon combustion equation setting (North American or Siegert) - see manual for details7MEASUREMENTSO 2 0 to 20.9 %0.1% +/- 0.3% (on flue gas) T90 < 20 sec Standard CO-H 2 compensated 0 to 10,000 ppm 1 ppm +/- 10 ppm (0 to 200) T90 < 40 secOptional+/- 5% of reading (201 to 2,000) +/- 10% of reading (2,001 to 10,000)CO (high) 0 to 40,000 ppm 10 ppm +/- 10 ppm (0 to 100) T90 < 75 sec Optional +/- 10% of reading (101 to 40,000)NO 0 to 3,000 ppm 0.1 ppm (0 to 50) +/- 3 ppm (0 to 50) T90 < 75 sec Optional +/- 5% (51 to 2000) 1 ppm (> 50) +/- 10% of reading (> 2000)NO 2 0 to 500 ppm 0.1 ppm (0 to 50) +/- 3 ppm (0 to 50) T90 < 40 secOptional1 ppm (> 50) +/- 5% (51 to 500) SO2 0 to 5000 ppm 1 ppm +/- 10 ppm (0 to 200) T90 < 30 sec Optional+/- 5% of reading (201 to 2,000) +/- 10% of reading (2001 to 5000)Ambient -20 to 537 °C 0.1 °C +/- 1 °C (0 to 100 °C) T90 < 70 sec Standard Temperature (-4 to 999 °F) (0.1 °F)Stack -20 to 1200 °C 1 °C +/- 2 °C (0 to 124 °C) T90 < 50 secStandardTemperature (-4 to 2192 °F) (1 °F) +/- 3 °C (125 to 249 °C) +/- 4 °C (250 to 400 °C)Differential +/- 600 °C 0.1 °C N/A N/A Standard Temperature (+/- 1112 °F) (0.1 °F) Pressure +/- 179 mB 0.01 mB +/- 0.03 mB (-1 to 1 mB) N/AStandard/ Differential (+/- 72 inwc) (0.01 inwc) +/- 0.05 mB (from -2.5 to -1 and +1 to +2.5) Pressure +/- -3% of reading (from 100 to -2.5 and +2.5 to +100)Flow 0 to 1 LPM0.05 LPM +/- 0.1 LPMN/A StandardCALCULATED READINGSEfficiency (HHV) 0.1 to 100% 0.1% North American, Siegert CO 2 (dry basis) 0.1 to a fuel dependent max in % 0.1%North American, Siegert NO x 0 to 3500 ppm 0.1 ppm (0 to 50) North American, Siegert 1 ppm (> 50) CO Ref to O 2 0 to 9999 ppm 1 ppm North American, Siegert NO Ref to O 2 0 to 9999 ppm 1 ppm North American, Siegert NO 2 Ref to O 2 0 to 9999 ppm 1 ppm North American, Siegert NO x Ref to O 2 0 to 9999 ppm 1 ppm North American, Siegert SO 2 Ref to O 2 0 to 9999 ppm 1 ppm North American, Siegert Excess Air 1 to 250% 1% North American CO/CO 2 Ratio 0.0001 to fuel dependent max 0.0001 Siegert ETA (LHV) 0 to 115% 0.1% Siegert Stack Loss 0.1 to 100% 0.1% Siegert Lambda 1 to 9.550.01Siegert8Bacharach621 Hunt Valley Circle,New Kensington, PA 15068 USA|********************Ordering Information1 = CO-H 1 = 7.5 ft. STD tubing2 = 15 ft. STD tubing3 = 7.5 ft. VITON tubing4 = 15 ft. VITON tubing2 = 24 in. probe3 = 36 in. probe2410-1110PCA 400 w/ O 2, CO, 12 in. probe with 7.5 ft. STDtubing and standard case2410-1112 PCA 400 w/ O 2, CO, 12 in. probe with 7.5 ft. STD tubing, standard case and Bluetooth ® printer 2411-1110 PCA 400 w/ O 2, CO, NO, 12 in. probe with 7.5 ft. STD tubing and standard case2411-1112 PCA 400 w/ O 2, CO, NO, 12 in. probe with 7.5 ft. STD tubing, standard case and Bluetooth ® printer2412-1310 PCA 400 w/ O 2, CO, NO, NO 2, 12 in. probe with 7.5 ft. VITON TM tubing and standard case2412-1312 PCA 400 w/ O 2, CO, NO, NO 2, 12 in. probe with 7.5 ft. VITON M tubing, standard case and Bluetooth ® printer2413-1310 PCA 400 w/ O 2, CO, NO, SO 2, 12 in. probe with 7.5 ft. VITON M tubing and standard case2413-1312 PCA 400 w/ O 2, CO, NO, SO 2, 12 in. probe with 7.5 ft. VITON M tubing, standard case and Bluetooth ® printerAccessories0024-1400 Bluetooth ® printer kit 0021-7006 Tru Spot ® Smoke Kit0104-1797 Thermocouple - 10 ft. for combustion air temperature0104-1798 Thermocouple - 1 in. for ambient air temperature 0024-8242 Differential Pressure and Temperature Kit 0024-3150 High-temperature particulate filterProbe and Hose Assemblies0024-3231 Probe Handle Assembly with 12 in. probe tube 0024-3232 Probe Handle Assembly with 24 in. probe tube 0024-3233 Probe Handle Assembly with 36 in. probe tube 0024-3234 Hose Assembly, Standard tubing, 7.5 ft 0024-3235 Hose Assembly, Standard tubing, 15 ft. 0024-3236 Hose Assembly, Viton TM , 7.5 ft.0024-3237Extended Hose Assembly, Viton TM , 15 ft.Common Configurations For more information about the PCA 400 and other Bacharach products scan here.HOW TO CONTACT US:Bacharach US Customer Service: +1 724 334 5000Bacharach EU Customer Service: +353 1 284 PCA 400 is a trademark of Bacharach, Inc.。