下载文档原格式
NF是法国标准的代号，1938年开始实行，其管理机构是法国标准化协会（AFNOR）。
法国每3年编制一次标准制修订计划，每年进行一次调整。
法国标准化协会指导17个大标准化规划组（GPN）的技术工作，指导其与规划委员会（COP）的工作进行协调。
每一个规划组有一个战略方针委员会（COS）指导工作，它集中了相关经济领域的决策者，还负责确定优先开展的工作，参与寻找资助。
NF标志是证明产品符合法国批准标准的一种法定质量符号，NF是权威的自愿性法国产品安全认证标志，在法国有90%以上的认可度。
NF 法国国家标准目录-第20页NF A 04.102-2003 晶粒度显微检验Steels - Micrographic determination of theapparent grain size1448NF A 05.150-1985 钢铁产品显微照相检查技术Steel products. Techniques of micrographic examination.931NF A 05.152-1984 钢产品用强无机酸的低倍检查Steel products. Macroscopic examination byetching with strong mineral acids290NF P 43.011-1985 建筑物的阀门不可控制范围内的不同压力的CB电动机起动器一般技术指标valves and taps for water supply in buildings CBdisconnectors with different Non controllablepressure ranges general technical Specifications782NF EN ISO 262-1999 螺钉,螺栓和螺母的选择尺寸General purpose metric screw threads -Tolerances210NF EN 571.1-1997 无损检验渗透探伤法检验第1部分一般原则Non-destructive testing - Penetrant testing - Part 1. General principles1007NF EN 895-1995 金属材料焊接的破坏性试验横向拉伸试验Destructive tests on welds in metallic materials. Transverse tensile test463NF EN ISO 898.1-1999碳钢和合金钢制紧固件的机械性能第1部分:螺栓、螺钉和双头螺栓Mechanical properties of fasteners made of carbonsteel and alloy steel -- Part 1: Bolts, screws andstuds2752NF EN ISO 898.5-1999 横向拉伸试验Mechanical properties of fasteners made of carbonsteel and alloy steel -- Part 5: Set screws andsimilar threaded fasteners not under tensilestresses796NF EN ISO 910-1996 金属材料焊接的破坏性试验弯曲试验Destructive tests on welds in metallic materials - Bend tests744NF EN ISO 965.2-1998 公差General Purpose Metric Screw Threads -Tolerances - Part 2: Limits of Sizes for GeneralPurpose External and Internal Screw Threads -Medium Quality806NF EN 1043.1-96 金属材料焊接的破坏性试验硬度试验第1部分电弧焊接头的硬度试验Destructive Tests on Welds in Metallic MaterialsHardness Testing Part 1: Hardness Test on ArcWelded Joints544NF EN ISO 2081-2008 金属覆盖层镍＋铬和铜＋镍＋铬电镀层Metallic and other inorganic coatings.Electroplated coatings of zinc with supplementary treatments oniron or steel1443NF EN ISO 3452.2-2007 无损检验渗透剂检验第2部分渗透剂材料试验Non-destructive testing - Penetrant testing - Part 2:Testing of penetrant materials2459NF EN ISO 3452.3-2007 无损检验渗透剂检验第3部分校准试验块Non-destructive testing - Penetrant testing - Part 3:Reference test blocks512NF EN ISO 3452.4-2007 无损检验渗透剂检验第4部分设备Non-destructive testing - Penetrant testing - Part 4:Equipment629NF EN ISO 3506.1-1998 耐腐蚀不锈钢紧固件的机械性能第1部分：螺栓、螺钉和螺柱Mechanical properties of corrosion-resistantstainless steel fasteners -- Part 1: Bolts, screwsand studs1920NF EN ISO 3506.2-1998 抗腐蚀不锈钢紧固件的机械性能第2部分Mechanical properties of corrosion-resistantstainless-steel fasteners -- Part 2: Nuts1560NF EN ISO 3506.3-1997 抗腐蚀不锈钢紧固件的机械性能第3部分Mechanical properties of corrosion-resistantstainless-steel fasteners -- Part 3: Set screws andsimilar fasteners not under tensile stress1258NF EN ISO 4759.1-2005 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A和CTolerances for fasteners -- Part 1: Bolts, screws,studs and nuts -- Product grades A, B and C1852NF EN ISO6157.2-1995紧固件表面不均匀性Fasteners -- Surface discontinuities -- Part 2: Nuts 702NF EN ISO 6506.1-2006 金属材料布氏硬度试验第1部分试验方法Metallic materials - Brinell hardness test - Part 1:Test method982NF EN ISO 6506.2-2006 金属材料布氏硬度试验第2部分试验机器的认证和校准Metallic materials - Brinell hardness test - Part 2:Verification and calibration of testing machines838NF EN ISO 6506.3-2006 金属材料布氏硬度试验第3部分参考块的校准Metallic materials - Brinell hardness test - Part 3:Calibration of reference blocks563NF EN ISO 6506.4-2006 金属材料布氏硬度试验第4部分硬度值表Metallic materials - Brinell hardness test - Part 4:Table of hardness values339NF EN ISO 6507.1-2006 金属材料维氏硬度试验第1部分试验方法Metallic materials - Vickers hardness test - Part 1:Test method961NF EN ISO 6507.2-2006 金属材料维氏硬度试验第2部分试验机器的认证和校准Metallic materials - Vickers hardness test - Part 2:Verification of testing machines1039NF EN ISO 6507.3-2006 金属材料维氏硬度试验第3部分参考块的校准Metallic materials - Vickers hardness test - Part 3:Calibration of the reference blocks777NF EN ISO 6507.4-2006 金属材料维氏硬度试验第4部分硬度值表Metallic materials - Vickers hardness test - Part 4:Tables of hardness values635NF EN ISO 6508.1-2006 金属材料洛氏硬度试验第1部分试验方法Metallic materials - Rockwell hardness test - Part1: Test method1300NF EN ISO 6508.2-2006 金属材料洛氏硬度试验第2部分试验机器的认证和校准Metallic materials - Rockwell hardness test - Part2: Verification and calibration of testing machines1292NF EN ISO 6508.3-2006 金属材料洛氏硬度试验第3部分参考块的校准Metallic materials - Rockwell hardness test - Part3: Calibration of reference blocks884NF EN ISO 7438-2005 金属材料弯曲试验Metallic materials - Bend test 411 NF EN ISO 8493-2004 金属材料管材扩口试验Metallic materials - Tube - Drift-expanding test 285NF EN ISO10484-2004螺母扩孔试验Widening test on nuts 370 NF EN ISO10485-2004螺母锥形保证载荷试验Cone proof load test on nuts 317NF EN 12223-2000 无损检验超声波检验1号校准块规范Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1376NF EN10216.2.A2-2007 承压用无缝钢管交货技术条件Seamless steel tubes for pressure purposes -Technical delivery conditions - Part 2: Non alloyand alloy steel tubes with specified elevatedtemperature properties; German version3074NF EN10217.1.A1-2005 承压用焊接钢管规定室温性能的非合金钢管Welded steel tubes for pressure purposes -Technical delivery conditions - Part 1: Non-alloysteel tubes with specified room temperatureproperties362NF F 18-001-1988 铁路运输车辆.锰钢磨耗板.性能.焊接规定Rolling stock. Wearing plates made ofmanganeses steel. Characteristics. Welding prescriptions950NF F 19-290-2002 铁路设施保护和装饰用的室外涂料系统Railway applications - Outdoor paint systems for conservation and ornementation1380NF E 25.100.0-92 Mechanical properties of fasteners made ofcarbon steel and alloy steelMechanical properties of fasteners made of carbonsteel and alloy steel1666NF E 25.400.0-93 Mechanical properties of corrosion-resistantstainlessMechanical properties of corrosion-resistantstainless983NF E 25-135-1986 固定部件。
编号中文名称英文名称NF B51-128-1993纤维板.螺钉轴向抽出阻力的测定(FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)NF B51-260-1972木屑板.螺丝拔除试验(PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)NF C20-115-1971标定截面不超过2.5mm**2，线芯无特殊预加工的硬铜导线连接的无螺钉接线端(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OFCONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTIONNOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OFTHE CONDUCTOR)NF C20-116-1981室外铜导线用螺钉丝端子(Terminals with screw campling for external copper conductors.)NF C60-002-1994家用及类似用低压电路用连接装置.第2-2部分:不带螺钉型夹件的分开的部件连接装置的特别要求(Connecting devices for low voltage circuits for householdand similar purposes. Part 2-2 : particular requirementsfor connecting devices as separate entities with screwless-type clamping units)NF C83-403-803-2003详细规范:防松螺钉不可拆卸的厚度为0.8MM的带扁平触点的矩形连接器(Detail Specification : rectangular connectors - Flatcontacts, 0,8 mm thickness, locking screw not detachable.)NF C93-561-1981电子元件.螺钉锁定的小型同轴接头.一般规定(Components for electronic equipment. Miniature coaxialconnectors with screw coupling. General requirements.)NF C93-566-1981电子元件.螺钉锁定射频用同轴接头（ＫＮ系列）.一般规定(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREWCOUPLING (TYPE KN). GENERAL REQUIREMENTS.)法国螺钉标准(NF screw standards)NF C93-578-1996射频连接件.第20部分:外导线内径为13.56mm(0,534 in)同时带有两条内导线的屏蔽平衡电缆用双头螺钉(3/4-20统(Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balancedcables having twin inner conductors with inner diameter ofouter conductor1356mm(0534in)(type twhn))NF E02-312-1981钢制规.螺丝孔莫氏锥环规(STEEL GAUGES. MORSE TAPER RING GAUGES.) NF E02-316-1981钢制规.螺丝孔５％锥度环规(STEEL GAUGES. METRIC TAPER RING GAUGES.)NF E03-152-1981用极限量规检验螺纹.螺钉用螺纹规(Thread checking with limit gauges. Threaded gauges for screw.)NF E03-154-1970公制三角螺纹.用极限规检验螺纹.螺钉和螺钉孔光滑度检查器(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWSAND NUTS.)NF E04-012-1-1996技术制图.螺钉和螺纹部件.第1部分:通用规范(Technical drawings. Screw threads and threaded parts. Part1 : general conventions.)NF E04-012-2-1996技术制图.螺钉和螺纹部件.第2部分:螺纹嵌镶件(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).)NF E04-012-3-1996技术制图.螺钉和螺纹部件.第3部分:简化表示(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADEDPARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEANSTANDARD EN ISO 6410-3).)NF E22-201-1992滚珠螺钉.第1部分:词汇和命名(Ball screws. Part 1 : vocabulary and designation.)NF E22-202-1992滚珠螺钉.第2部分:公称直径和公称引线.米制系列(Ball screws. Part 2 : nominal diameters and nominal leads.Metric series.)NF E22-203-1993球端螺钉.第3部分:合格条件和合格试验(Ball screws. Part 3 : acceptance conditions and acceptance tests.)NF E25-011-1992紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDSAND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN28839).)NF E25-018-2-1994沉头螺钉.第2部分:十字槽(CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)NF E25-021-1994螺钉的十字槽(欧洲标准EN ISO 4757)(Cross recesses for screws.)NF E25-022-1-2001紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C(Tolerances for fasteners - Bolts, screws, studs and nuts -Part 1 : product grades A, B and C.)NF E25-022-1987紧固件.Ｆ级螺钉和螺帽公差（精密机械）.螺纹直径1到3mm(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCTGRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3MM.)NF E25-023-1992紧固件.螺栓和螺钉的自由尺寸孔(Fasteners. Clearance hole for bolts and screws.)NF E25-100-1-1999碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱(Mechanical properties of fasteners made of carbon steeland alloy steel - Part 1 : bolts, screws and studs.)NF E25-100-3-1992紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWSAND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN26157-1).)NF E25-100-4-1992紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREWAND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN26157-3).)NF E25-100-5-1998碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件(Mechanical properties of fasteners made of carbon steeland alloy steel. Part 5 : set screws and similar threadedfasteners not under tensile stresses.)NF E25-100-6-1998不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)NF E25-100-7-1995紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONALTEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINALDIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)NF E25-100-8-1998不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fastenersnot under tensile stress.)NF E25-107-1983金属用螺钉.内部六叶埋头.Ａ级.符号ＦＸ(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)NF E25-108-2001半埋头内六角螺钉(Hexalobular socket raised countersunk head screws.) NF E25-109-2001平头内六角螺钉(Hexalobular socket pan head screws.)NF E25-110-2001圆柱头内六角螺钉(Hexalobular socket head cap screws.)NF E25-111-2001凸头内六角螺钉(Hexalobular socket cheese head screws.)NF E25-114-2001六角头螺钉.产品等级A和B(Hexagon head bolts - Product grades A and B.)NF E25-115-2-2001六角头螺钉.产品等级C(Hexagon head screws - Product grade C.)NF E25-116-1983金属用螺钉.方头.标准杆.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-117-1983金属用螺钉.方头.全螺纹.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-118-1983金属用螺钉.方头.C级.符号Q(Square head screws. Product grade C. Symbol Q.)NF E25-119-1-1994带有H型或Z型的十字槽沉头螺钉(普通头型).产品等级A.第1部分:性能类别4.8的钢(Countersunk flat head screws (common head style) with typeH or type Z cross recessed. Product grade A. Part 1 : steelof property class 4.8.)NF E25-119-2-1994十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属(Cross recessed countersunk flat head scews (common headstyle). Grade A. Part 2 : steel of property class 8.8,stainless steel and non-ferrous metals.)NF E25-120-1994带有H型或Z型的十字槽半沉头螺钉(普通头型).产品等级A(Countersunk raised head screws (common head style) withtype H or type Z cross recessed. Product grade A.)NF E25-121-1994带有H型或Z型十字槽的平圆头螺钉.产品等级A(Pan head screws with type H or type Z cross recess.Product grade A.)NF E25-122-1984金属用螺钉.称作“POLIER“的Z十字槽宽圆头.A级.符号RLZ(SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCTGRADE A. SYMBOL RL Z.)NF E25-123-1994一字槽沉头螺钉(普通头型).产品等级A (Slotted countersunk flat head screws (common head style). Product grade A.)NF E25-124-1994一字槽半沉头螺钉(普通头型).产品等级A (Slotted raised countersunk head screws (common head style). Product grade A.)NF E25-126-1997内六角圆头螺钉(HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)NF E25-128-1994一字槽平圆头螺钉.产品等级A(Slotted pan head screws. Product grade A.)NF E25-130-1986加垫圈的金属用螺钉.锥形光滑压紧垫圈.Ａ级(SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCTGRADE A.)NF E25-131-1986加垫圈的金属用螺钉.内齿锥形垫圈.Ａ级(SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)NF E25-132-1986加垫圈的金属用螺钉.外齿垫圈.Ａ级(SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)NF E25-133-1987紧固件.螺杆千斤顶用的金属螺钉.短六角头长制动端螺钉.Ａ和Ｂ级.符号ＨＺ(Fasteners. Screws for screw-jacks. Small hexagon headscrews with long dog point. Product grades A and B. SymbolHZ.)NF E25-134-1987紧固件.螺杆千斤顶用的金属螺钉.短方头短制动端螺钉.Ａ和Ｂ级.符号ＱＺ(Fasteners. Screws for screw-jacks. Small square headscrews with short dog point. Product grades A and B. SymbolQZ.)NF E25-139-1987紧固件.金属用螺钉.Ｚ十字槽宽凸圆柱形头.Ａ级.符号ＣＢＬＺＳ(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD.GRADE A. SYMBOL CBL ZS.)NF E25-142-1991紧固件.电阻焊金属螺钉.缩小头(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)NF E25-149-1998十字槽圆头螺钉(CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)NF E25-150-1998带平垫圈的螺钉和垫圈组件.垫圈强度等级为200 HV和300 HV.(Screw and washer assemblies with plain washers. Washerhardness classes 200 HV and 300 HV.)NF E25-151-2001米制细牙螺纹的六角头螺钉.产品等级A和B (Hexagon head screws with metric fine pitch thread -Product grades A and B.)NF E25-160-1992平端开槽调整螺钉(SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)NF E25-161-1992锥端开槽调整螺钉(SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)NF E25-162-1992长制动端开槽调整螺钉(SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)NF E25-163-1992蝶形端开槽调整螺钉(SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)NF E25-501-2000紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级(Tolerances for fasteners - Part 3 : plain washers forbolts, screws and nuts - Product grades A and C.)NF E25-520-1998螺丝和洗衣机组件用水平式洗衣机.小型,常规型和大型系列.A级产品(PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL,NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEANSTANDARD EN ISO 10673).)NF E25-525-2000通用米制螺栓、螺钉和螺母用平垫圈.一般示意图(Plain washers for metric bolts, screws and nuts forgeneral purposes - General plan.)NF E25-600-1984紧固件.木螺钉系列标准(FASTENERS. WOOD SCREWS FAMILY STANDARD.)NF E25-601-1984十字槽沉头木螺钉.符号FZ(CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)NF E25-602-1984十字槽沉头木螺钉.符号FBZ (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)NF E25-603-1984一字槽圆头木螺钉.符号RZ(CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)NF E25-604-1984有槽沉头木螺钉.符号FS(Slotted countersunk head wood screws. Symbol FS.)NF E25-605-1984木螺丝.一字槽沉头.FBS符号(Slotted raised countersunk head wood screws. Symbol FBS.) NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)NF E25-650-1-1994热处理钢自攻螺钉.机械性能(Heat-treated steel tapping screws. Mechanical properties.) NF E25-650-2-1999自攻螺钉螺纹(Tapping screw thread.)NF E25-651-2003耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉(Mechanical properties of corrosion-resistant stainlesssteel fasteners - Part 4 : tapping screws.)NF E25-652-2001沉头内六角攻丝螺钉(Hexalobular socket countersunk head tapping screws.)NF E25-653-2001半埋头(椭圆形)内六角攻丝螺钉(Hexalobular socket raised countersunk (oval) head tapping screws.)NF E25-654-2001平头内六角攻丝螺钉(Hexalobular socket pan head tapping screws.)NF E25-655-1983内六角圆头自攻螺钉.符号RLX (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)NF E25-656-1994十字槽沉头自攻螺钉(普通头型)(Cross recessed countersunk (flat) head tapping screws (common head style).)NF E25-657-1994十字槽半沉头椭圆头自攻螺钉(Cross recessed raised countersunk (oval) head tapping screws.)NF E25-658-1994十字槽平圆头自攻螺钉(Cross recessed pan head tapping screws.)NF E25-659-1984自攻螺钉.十字槽半沉头.(`Poelier`).符号RLZ(TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.)NF E25-664-1986一字槽六角头自攻螺钉.符号HS(HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)NF E25-666-1987紧固件.自攻螺钉.Z形十字槽和一字槽平圆头螺钉.符号CBL ZS(FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTEDPAN HEAD. SYMBOL CBL ZS.)NF E25-755-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)NF E25-756-1997金属不锈钢和硬化钢的平行螺钉(Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)NF E25-757-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)NF E25-800-1-1994紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 :HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUTNIBS. PRODUCT GRADE A.)NF E25-800-2-1994紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 :CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)NF E25-851-1987紧固件.滚制螺钉(ISO米制螺纹).特性(FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)NF E27-163-1972调整螺钉(ADJUSTING SCREW.)NF E27-164-1976锁紧螺钉的垫板(LOCKING SCREW.)NF E27-165-1976锁紧螺钉的穿销(SLIDE FOR LOCKING SCREW.)NF E27-166-1976滚花头锁紧螺钉(LOCKING SCREW WITH KNURLED KNOB.)NF E27-167-1976星形手扭锁紧螺钉(LOCKING SCREW WITH PALM KNOB.)NF E27-168-1976四翼锁紧螺钉(LOCKING SCREW WITH 4 ARMED KNOB.)NF E27-170-1974通用滚花头螺钉(GENERAL PURPOSE KNURLED THUMBS SCREWS.) NF E27-191-1983紧固件.有肩固定螺钉(FASTENERS. SHOULDERED RETAINING SCREWS.)NF E27-214-1976带小提琴紧弦用的蝶形螺母锁紧螺钉(LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.) NF E27-215-1976带六角螺母的锁紧螺钉(LOCKING SCREWS WITH HEXAGON NUT.)NF E27-303-1968有孔球头螺钉(SPHERICAL HOLED HEAD SCREW.)NF E27-853-1989通用金属卡箍.带型，无螺钉，不可重复使用(Metallic hose clamps for general purpose. Band type,without screws, non re-usable. Specifications.)NF E27-854-1982通用金属卡箍.带型,无螺钉,可重复使用的销钉卡箍或轴的卡箍(METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUTSCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)NF E62-307-1977机床构造标准部件.多轴头.防护装置.２８和３６卧式防护装置.支架.行程止推螺钉(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLEHEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOPSCREW.)NF E62-519-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄驱动系统的尺寸(Tool chucks (end mill holders) wirth clamp screws forflatted cylindrical shank tool - Part 1 : dimensions of thedriving system of tool shanks.)NF E62-520-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).带7/24锥柄的夹头尺寸(Tools chucks (end mill holders) wirth clamp screws forflatted cylindrical shank tools - Dimensions of chucks with7/24 taper shank.)NF E62-526-2003带7/24外圆锥和莫氏内圆锥缩径套筒和连接螺钉(Reduction sleeves with 7/24 external and Morse internaltaper and incorporated screw.)NF E63-512-1983铸型和挤压器材.金属模型构件.止动螺钉(MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)NF E66-103-1993机用螺丝锥和手动螺丝锥(Short machine taps and hand taps.)NF E66-107-2000公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻(Long shank taps with nominal diameters from M3 to M10 -Full-diameter shank taps with recess.)NF E66-108-2000公称直径由M3-M24和1/8-1 英寸的长杆螺丝攻.渐减型螺丝攻(Long shank taps with nominal diameters from M3 to M24 and1/8 in to 1 in - Reduced shank taps.)NF E66-120-1975圆柱和锥形管螺纹手用螺丝锥(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)NF E66-150-1990ＩＳＯ公制螺纹的手用和机用圆螺丝板牙(Hand- An machine-operated circular screwing dies and hand-operated die stocks.)NF E66-153-1990煤气管道圆柱螺纹手用和机用圆螺丝板牙(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)NF E74-303-2001螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸(Assembly tools for screws and nuts - Forged and tubularsocket wrenches - Maximum outside head dimensions.)NF E74-304-2001螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度(Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combinationwrenches - Maximum widths of heads.)NF E74-305-2001螺钉和螺母装配工具.双头扳手.尺寸选配(Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)NF E74-307-2001螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度(Assembly tools for screws and nuts - Combination wrenches- Lengths of wrenches and maximum thickness of heads.)NF E74-310-2001螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches andthickness of the heads.)NF E74-311-2001螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed, flatand offset, box wrenches - Length of wrenches and thicknessof the heads.)NF E74-313-2001螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed, deepoffset and modified offset, box wrenches - Length ofwrenches and thickness of the heads.)NF E74-321-1998螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKETWRENCHES. DIMENSIONS AND TORQUE TEST.)NF E74-322-1972螺钉螺帽紧固工具.齿条式扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)NF E74-323-1972螺钉螺帽紧固工具.开槽螺帽用单钩扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)NF E74-324-2001螺钉和螺母用装配工具.可调扳手(Assembly tools for screws and nuts - Adjustable wrenches.)NF E74-325-2003螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法(Assembly tools for screws and nuts - Hand torque tools -Requirements and test methods for design conformancetesting, quality conformance testing and recalibrationprocedure)NF E74-331-2003螺钉和螺母用装配工具.内六角扳手(Assembly tools for screws and nuts - Hexagon socket screw keys.)NF E74-351-2002螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记(Assembly tools for screws and nuts - Screwdrivers forslotted-head screws - Part 2 : general requirements,lengths of blades and marking of hand-operatedscrewdrivers)NF E74-352-1998螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头(Assembly tools for screws and nuts. Screwdrivers forslotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)NF E74-353-1-2002螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具(Assembly tools for screws and nuts - Machine-operatedscrewdriver bits - Part 1 : screwdriver bits for slottedhead screws.)NF E74-353-2-2002螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头(Assembly tools for screws and nuts - Machine-operatedscrewdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)NF E74-353-3-2002螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头(Assembly tools for screws and nuts - Machine-operatedscrewdriver bits - Part 3 : screwdriver bits for hexagonsocket screws.)NF E74-354-2002螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸(Assembly tools for screws and nuts - Spiral ratchetscrewdriver ends - Dimensions.)NF E74-355-1993十字槽头螺钉用旋转具.第1部分:旋具尖(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)NF E74-356-1993十字槽头螺钉用旋具.第2部分:手持式旋具的一般要求、旋具头长度和标记(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 :GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OFHAND-OPERATED SCREWDRIVERS.)NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验(Assembly tools for screws and nuts - Drive ends for hand-and machine-operated screwdriver bits and connecting parts- Dimensions, torque testing.)NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验(Assembly tools for screws and nuts - Drive ends for hand-and machine-operated screwdriver bits and connecting parts- Dimensions, torque testing.)NF E74-361-1997螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具(Assembly tools for screws and nuts. Driving squares. Part1 : driving squares for hand socket tools.)NF E74-362-1997螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具(Assembly tools for screws and nuts. Driving squares. Part2 : driving squares for power socket tools.)NF E74-363-1-1997螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸(Assembly tools for screws and nuts. Square drive sockets.Part 1 : hand-operated sockets. Dimensions.)NF E74-363-2-1997螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸(Assembly tools for screws and nuts. Square drive sockets.Part 2 : machine-operated sockets “impact“. Dimensions.)NF E74-363-3-2001螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸(Assembly tools for screws and nuts - Square drive sockets- Part 3 : machine-operated sockets (“non impact“) -Dimensions.)NF E74-365-1997螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验(Assembly tools for screws and nuts. Driving parts forhand-operated square drive socket wrenches. Dimensions andtests.)NF E74-366-1997螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions andtests.)NF E74-367-1995螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头(Assembly tools for screws and nuts. Square drive extensionhexagon insert, for power socket wrenches.)NF E74-381-1997螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒(Assembly tools for screws and nuts. Technicalspecifications. Part 1 : hand-operated wrenches andsockets.)NF E82-020-1984模压锻造零件.拉紧装置用灯的螺钉.规范(DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)NF F01-088-1971铁路运输设备.带有槽端头和螺纹端头的未钻孔轴.头部钻孔的螺钉(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTEDAND THREADED ENDS. SCREWS WITH DRILLED HEADS.)NF F03-004-1983铁路车辆.金属螺钉. 沉头和半沉头. Ａ级.符号Ｆ和ＦＢ(Railway rolling stock. Grade A. Countersunk and raisedcountersunk notched head machine screws. Symbols F and FB.)NF F03-005-1983铁路车辆.金属螺钉. 圆柱头和球面圆柱头.Ａ级. 符号Ｃ和ＣＲ(Railway rolling stock. Grade A. Notched cheese head ornotched dome head machine screws. Symbols C and CR.)NF F03-006-1983铁路车辆.开槽懦半沉头螺钉一螺母. Ａ级.符号ＦＢＰ(Railway rolling stock. Grade A. Slotted or notched raisedcountersunk head screws nuts. Symbol FBP.)NF F03-016-1983铁路车辆.开槽沉头螺钉, 螺母. Ａ级. ＦＰ(Railway rolling stock. Grade A. Slotted countersunk headscrews nuts. Symbol FP.)NF F10-404-1984铁路车辆.0.25MN的联接螺钉(Railway transport equipment. Coupling screw of 0,25 mn.)NF F11-003-1970铁路车辆.手制动. 螺钉和螺母. 螺距和螺纹剖面. 螺钉传动(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS.PITCHES AND PROFILES. SCREW DRIVES.)NF F50-006-1998铁路固定设备.带可变螺纹的枕木螺丝(Railway fixed equipment. Sleeper screws with variable thread.)NF F55-251-1991铁路固定设备.信号电路.连接和分段器材.螺钉连接部件(RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTINGAND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)NF F56-123-1980铁路固定设备.通讯和信号装置架空线路用器材.直径口毫米镀锌方头木螺钉(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEADTELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUAREHEAD WOOD SCREWS.)NF J41-465-1957造船工业.“金士顿“阀门.螺钉零件(SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)NF J46-126-1951造船工业.空气入口.手柄和紧固螺钉(SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.) NF L22-063-1970用板手操作的螺母、螺钉和轴的间隙(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)NF L22-070-1976螺钉的BNAE型十字槽(CROSS RECESS (B.N.A.E.).)NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)NF L22-072-1991航天建筑.螺丝.920型十字槽(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)NF L22-090-1966修配用大直径标准螺钉、销和垫圈(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)NF L22-111-1975无销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts without split pin hole. Sim thread (rech.).)NF L22-112-1975带销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with split pin hole. Sim thread (rech.).)NF L22-121-1975带轻杆无锁孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)NF L22-122-1975带轻杆有销孔六角头螺钉.国际单位米制螺纹(Hexagon head bolts with waisted shank with split pin hole.Sim thread.)NF L22-125-1985六角头承拉螺钉ISO 螺纹４h 类(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)NF L22-126-1985带锁紧孔六角头承拉螺钉.ISO螺纹４h 类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)NF L22-127-1985带颈杆六角头承拉螺钉.ISO螺 纹４h 类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)NF L22-128-1985带颈杆有锁紧孔六角头承拉螺钉.ISO 螺纹４h 类(Bolt, hexagonal head, necked shank, with locking hole, fortensile application. ISO thread 4H class.)NF L22-129-1985带销孔六角头承拉螺钉.ISO 螺纹４h 类(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)NF L22-134-1975无销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts without split pin hole. Sim thread (rech.).)NF L22-135-1975带销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts with split pin hole. Sim thread (rech.).)NF L22-136-1984通用六角头螺钉短螺纹(Bolt, hexagonal head, current use, short thread.)NF L22-137-1984带锁紧孔六角头短螺纹螺钉(Bolt, hexagonal head, with locking hole, short thread.) NF L22-138-1984精密六角头短螺纹螺钉(Bolt, hexagonal head, close tolerance, short thread.)NF L22-139-1984带锁紧孔精密头角头短螺纹螺钉(BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)NF L22-140-1984六角头全螺纹螺钉(Bolt, hexagonal head, threaded to head.)NF L22-141-1984有锁紧孔方角头全螺纹螺钉(Bolt, hexagonal head, with locking hole, threaded to head.)NF L22-142-1984常用有销孔六角头螺钉(BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)NF L22-145-1985六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, for tensile application, ISO thread 4G class.)NF L22-146-1985有锁紧孔六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)NF L22-147-1985带颈杆六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)NF L22-148-1985带颈杆有销紧孔六角头承拉螺钉.ISO螺纹4G类(Bolts, hexagonal head, necked shank, with locking hole,for tensile application. ISO thread 4G class.)NF L22-151-1975开槽圆柱头螺钉和紧固凸圆头螺钉.国际单位制螺纹(Slotted and drilled cheese head screws. Sim thread(rech.).)NF L22-152-1975开槽扁头螺钉.国际单位米制螺纹(Slotted mushroom head screws. Sim thread (rech.).)NF L22-153-197590°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws. Sim thread (rech.).)NF L22-154-1975120°半圆头开槽埋头螺钉.单际单位米制螺纹(Slotted raised 120 degrees countersunk head screws. Simthread (rech.).)NF L22-156-1975锥顶凸圆头开槽螺钉.国际单位米制螺纹(Slotted raised cheese head screws with cone point. Sim thread (rech.).)NF L22-157-1975锥顶扁头开槽螺钉.国际单位米制螺纹(Slotted mushroom head screws with cone point. Sim thread (rech.).)NF L22-158-1975锥顶90°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)NF L22-159-1975锥顶120°半圆头开槽埋头螺钉.国际单位米制螺纹(Slotted raised 120 degrees countersunk head screws withcone point. Sim thread (rech.).)NF L22-161-1984有NF L22-72十字槽的通用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)NF L22-162-1984有NF L22-072十字槽的精密100°全螺纹埋头螺钉(Bolt, 100 degrees countersunk head, close tolerance, nf L22-072 cross recess.)NF L22-163-1984有NF L22-072十字槽的常用100°度全螺纹埋头螺钉(Bolt, 100 degrees countersunk head, threaded to head, nf L22-072 cross recess.)NF L22-167-1984有NF L22-070十字槽的常用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)NF L22-168-1984有NF L22-070 十字槽的紧公差100°沉头螺钉(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.)NF L22-169-1984有 NF L22-070十字槽的100°全螺纹埋头螺钉(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L22-070,CROSS RECESS.)NF L22-171-1984有NF L22-072十字槽的常用半圆头螺钉(Bolt, pan head, current use, nf L22-072 cross recess.) NF L22-173-1984有NF L22-072十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)NF L22-176-1984有NF L22-072十字槽锥顶半圆头非磁性螺钉(Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)NF L22-177-1984有NF L22-070十字槽常用半圆头螺钉(Bolt, pan head, current use, nf L 22-070 cross recess.) NF L22-179-1984有NF L22-070十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)NF L22-181-1976有BNAE十字槽扁头螺钉.国际单位米制螺纹(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)NF L22-182-1976有BNAE十字槽90°埋头螺钉.国际单位米制螺纹(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS. SIM THREAD.)NF L22-183-1976有BNAE十字槽90°埋头螺钉.国际单位米制螺纹(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.CROSS RECESS. SIM THREAD.)NF L22-184-1976有BNAE十字槽120°埋头螺钉.国际单位米制螺纹(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS. SIM THREAD.)NF L22-186-1976有BNAE十字槽锥顶扁头螺钉.国际单位米制螺纹(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONEPOINT. SIM THREAD.)NF L22-187-1976有BNAE十字槽锥顶90°埋头螺钉.国际单位米制螺纹(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS AND CONE POINT. SIM THREAD.)NF L22-188-1976有BNAE十字槽锥顶120°埋头半圆头螺钉单国际单位制米螺纹(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.CROSS RECESS AND CONE POINT. SIM THREAD.)NF L22-189-1976有BNAE十字槽锥顶120°埋头螺钉.国际单位米制螺纹(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS AND CONE POINT. SIM THREAD.)NF L22-201-1984短螺纹精密螺钉.六角头.ISO螺纹(Bolt, hexagonal head, short thread, close tolerance. ISO thread.)。
NF gear standards法国齿轮标准(doc 6页)法国齿轮标准(NF gear standards)ANSI | BS | DIN | EN | GB | ISO | JIS | NF |DIC编号中文名称英文名称NFE23-001-1-1998齿轮术语词汇.第1部分:有关几何学上的定义 (Vocabulary of gear terms. Part 1 :definitions related to geometry.)NF E23-002-1988 齿轮词汇.几何定义.螺旋齿轮 (GEARS. GLOSSARY OF WORM GEAR PAIRS. GEOMETRICAL DEFINITIONS.) NF E23-005-1998齿轮的国际符号表示法.几何参数符号 (International gear notation. Symbols for geometrical data.) NF E23-007-1-1995 圆柱齿轮.准确度的ISO 体系.第1部分:齿轮齿对应齿根面相应偏差的容许值和定义 (Cylindrical gears. ISO system of accuracy. Part 1 : definitions and allowable values of deviations relevant to corresponding flanks of gear teeth.)NF E23-007-2-1997 圆柱齿轮.ISO 体系的准确度.第2部分:有关放射要素偏差度和输出信息的相应偏差的容许值和定义 (CYLINDRICAL GEARS. ISO SYSTEM OF ACCURACY. PART 2 : DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITEDEVIATIONS AND RUNOUT INFORMATION.)NF E23-009-1998 普通和重型(Cylindrical gears for技术设备用圆柱齿轮.标准基本齿条齿牙剖面 general and heavy engineering. Standard basic rack tooth profile.)NF E23-014-1994齿轮.ISO 术语.齿轮齿术语:磨损和损坏 (Gears. ISO system ofterminology. Terminology for theappearance of gear teeth : wear anddamages.) NF E23-016-1986锥形直的齿轮.给齿轮工人的说明书 (STRAIGHT BEVEL GEARS. INFORMATION TO BE GIVEN TO THE MANUFACTURER.) NFE23-022-1-2002齿轮装置的验收标准.第1部分:空气声的测试标准 (Acceptance code for gear units - Part 1 : test code for airborne sound.)NFE23-030-1-2002正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素(Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.)NF E23-030-2-2003 正齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面耐用能力的计算 (Calculation of loadcapacity of spur andhelical gears - Part 2 :calculation of surfacedurability (pitting).)NF E23-030-3-2003 正齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算 (Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength.) NF直齿轮和斜(Calculation of loadE23-030-5-2003 齿轮承载能力的计算.第5部分:材料的强度和质量 capacity of spur and helical gears - Part 5 : strength and quality of materials.)NF E23-035-2003石油和天然气工业.特殊用途高速齿轮部件 (Petroleum and natural gas industries - High speed special-purpose gear units.)NF E51-234-2003石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 (Petroleum, chemical and gas serviceindustries - Packaged, integrally geared centrifugal air compressors.) NF E62-250-1976机床构造标准部件.多轴头.简单直齿轮(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE STRAIGHT TOOTHED PINIONS.)NF E62-251-1976机床构造标准部件.多轴头.偏心轮毂直齿轮 (UNIT HEADS. MULTI SPINDLE HEADS. OFFSETBOSS STRAIGHT TOOTHED PINIONS.) NF E62-255-1976 机床构造标准部件.多轴头.１号和２号攻螺纹轴上的直齿主动齿轮(MODULAR UNITS FORMACHINE TOOLS.MULTISPINDLE HEADS.CONTROLSTRAIGHT-TOOTHEDPINIONS FOR TAPPINGSPINDLES NO 1 AND 2.) NF E62-256-1976 机床构造标准部件.多轴头.３号和４号攻螺纹轴上的直齿主动齿轮(MODULAR UNITS FORMACHINE TOOLS.MULTISPINDLE HEADS.CONTROLSTRAIGHT-TOOTHEDPINIONS FOR TAPPINGSPINDLES NO 3 AND 4.) NF E62-257-1976机床构造标准部件.多(MODULAR UNITS FOR MACHINE TOOLS.轴头.简单直齿轮MULTISPINDLE HEADS. SIMPLESTRAIGHT-TOOTHED PINIONS.)NF E62-258-1976机床构造标准部件.多轴头.偏心轮毂直齿轮 (MODULAR UNITS FORMACHINE TOOLS. MULTISPINDLE HEADS.OFFSET BOSSSTRAIGHT-TOOTHEDPINIONS.) NF E66-235-1966 链传动.切削齿轮的圆盘铣刀断面 (CHAIN TRANSMISSIONS.PROFILE OF CHAIN WHEELMODUAL CUTTERS.) NF E66-236-1966 链传动.切削齿轮的滚刀断面 (CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL HOBS.)NF F02-303-1990 铁路车辆.齿轮及传动齿轮 (RAILWAY ROLLING STOCK. GEARS PINIONS AND WHEELS.)NF F10-420-1991铁路车辆.牵引车辆和拖车用车钩、牵引装置及驱动齿轮装置(Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.)NF J95-030/A1-2000 小艇.始于齿轮的保护(Small craft -Start-in-gearprotection.) NF J95-044-2001小型船舶.操舵装置.齿轮链接系统 (Small craft - Steering gear - Geared link systems.)NF R11-411-1987道路车辆.起动机齿轮.齿轮特性和检验 (ROAD VEHICLES.STARTER-GEAR SYSTEM. GEAR CHARACTERISTICS AND CONTROL.) NF S80-501-1995 钟表业.渐(Horology. Corrected开线齿轮或摆轮校正.最佳模数cylcloidal or involute toothing gears.Preferred modules.) NF S80-504-1995 钟表业.渐开线齿轮或摆轮校正.齿轮对的轮齿 (Horology. Corrected cycloidal or involute toothing gears.Toothing for coupled gears.)NF S80-505-1995 钟表业.渐开线齿轮或摆轮校正.齿轮组的轮齿 (Horology. Corrected cycloidal or involute toothing gears.Toothing for trains of gears.)NF S80-525-1995钟表业.校正摆轮.齿轮增速装置.基础型材.主动轮和从动轮 (Horology. Corrected cycloidal toothing gears. Step up gears. Basic profiles. Driving gear and driven gear.) NF S80-526-1995钟表业.校正摆轮.增速或减速齿轮(Horology. Corrected cycloidal toothing gears. Step up or reducting gears.)NF S80-541-1995 钟表业.校正摆轮.簧盒中心齿轮(Horology. Correctedcycloidal toothinggears. Spring-barrelcentre gears.) NF S80-560-1995 钟表业.渐开线齿轮.词汇 (Horology. Involute toothing gears. Vocabulary.)NF S80-565-1995 钟表业.渐开线齿轮.标准齿条 (Horology. Involute toothing gears. Basic racks.)NF S80-566-1995 钟表业.渐开线齿轮.标准轮齿 (Horology. Involute toothing gears. Normal toothing.)NF S80-567-1995 钟表业.渐(Horology. Reducing开线齿轮.中心距离无变化的修正的齿形插口 involute toothing gears. Corrected toothing without variation of centredistance.)NF S80-568-1995 钟表业.渐开线减速齿轮.有轴距变化的校正齿轮(Horology. Reducing involute toothing gears. Corrected toothing with variation of centre distance.)NF S80-569-1995 钟表业.渐开线减速齿轮.偏心距模数为0.5的校正轮齿 (Horology. Reducing involute toothinggears. Toothingcorrected by shift to 0,5 module.) NF S84-060-1996钟表业.表的中心轴.与小齿轮的连接尺寸 (Horology. Center staff for watches. Fitting dimensions with cannon pinion.)NF T60-507-1991 润滑剂、工业用油及相关产品(L类).分类.第6部分:C 系列(齿轮传动)(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 6 : FAMILY C (GEARS).)NF T60-602-1995 工业齿轮用耐特高压润滑剂.人工老化氧化稳定性的评定(EXTREME PRESSURELUBRICANTS FORINDUSTRIAL GEARS.EVALUATION OF OXIDATIONSTABILITY BY ARTIFICIALAGEING.)编号中文名称英文名称返回。
