下载文档原格式
Midas Rex® MR7NEXT GENERATION OF HIGH-SPEED PNEUMATIC MOTORSExceptional power.Surprisingly agile.Performance reinvented.P o w e r a n d P e r f o rMidas Rex ®MR7Power and Performance Reinvented.Forty years later, we still believe in continuous innovation and learning from experience. The Midas Rex® MR7 and new MR7 Touch High-Speed Pneumatic Motors deliver the dynamic power and performance you expect, and then some. With innovative proprietary technology throughout the system, every component is carefully engineered and manufactured for maximum power with increased durability.Dynamic Performance Technology.• Patented technology designed to deliver efficient performance• Precision-engineered and manufactured for quality and durability• Innovative lubrication system for consistent oil delivery in every caseExceptional Power.• Delivers more torque and power when you need it most• 72,000 rpm at 120 psi/8 barMidas Rex® has 40 years of leadership and innovation in high-speed pneumatic drills.*Compared to Midas Rex Legend Gold® System **Compared to Midas Rex Legend Gold® Touchuu 20% more power *uu 20% more torque *MR7m a n c e r e i n v e n t e d.User-Friendly Foot Control.• Open pedal design for easy access and repositioning • A utomatic port cover helps protect the motor port when not in use• Compatible with Midas Rex® Legend Gold®, Legend Gold Touch®, and Legend Platinum® motors• Easy to set up, service, and expandStandardized Platform.• U ses the Legend® dissecting tools and attachments • Comprehensive product line to meet your needsSurprising Agility.• S maller and lighter hose for easy maneuveringand handling in the OR• Ergonomic enhancements overall for more comfortable usePower and Performance You Can Depend On.uu 10% more power **uu 15% more torque **Control at Your Fingertips.• Additional convenience in the OR• Ergnomically designed adjustable extension lever • MR7 Touch onlyMR7 TouchMidas Rex ® MR7Ordering InformationQtyPM700 • Midas Rex® MR7 Motor1PM710 • M idas Rex® MR7 Touch Motor 1PA700 • Disposable Oiler/Diffuser 1PC700 • Foot Control 1PC710 • Regulator Hose 1PC720 • Triton® Adapter1PA600• Instrument Case 1Replacement PartsPA615 - Lid, PA620 - Tray, PA625 - Tray MatLegend® System AccessoriesPA120 • Legend Attachment Cleaning Nozzle PA130 • Legend Motor WrenchPA200 • Legend Regulator (DISS conn.)PA300 • Legend 1.2mm Cleaning Brush (1/32”)PA310 • Legend 2.4mm Cleaning Brush (3/32”)PA320 • Legend 3.2mm Cleaning Brush (1/8”)PA305 • Legend 1.2mm Cleaning Brush (5pk)PA315 • Legend 2.4mm Cleaning Brush (5pk)PA325 • Legend 3.2mm Cleaning Brush (5pk)PA115 • Legend Tool Storage Rack PC110 • Legend FN2-DISS to M-Schr PC120 • Legend FN2-DISS to MA-DISS PC130 • Legend WF4 Connector PC140•Legend FN2-DISS to F-SchrMedtronic Powered Surgical Solutions 4620 North Beach Street Fort Worth, TX 76137USAAUTHORIZED REPRESENTATIVE IN EU:Medtronic® B.V.Earl Bakkenstraat 10, 6422 PJ Heerlen The NetherlandsORDERS:Customer Service 1-800-433-7080FAX: 800-468-9713REPAIRS:Repair Department 1-800-335-9557FAX: 817-788-6441For more information, contact your Medtronic NT sales representative or refer to . Refer to instruction manual for instructions, warnings, precautions and contraindications.F e d e r a l L a w (U S A ) r e s t r i c t s t h i s d e v i c e f o r s a l e b y o r o n t h e o r d e r o f a p h y s i c i a n . P a t e n t s P e n d i n g . ©2009, M e d t r o n i c , I n c . A l l R i g h t s R e s e r v e d . M i d a s R e x ®, L e g e n d ®, L e g e n dG o l d ®, L e g e n d G o l d T o u c h ®, a n d T r i t o n ® a r e r e g i s t e r e d t r a d e m a r k s o f M e d t r o n i c , I n c .L I T 250023E N .R N E W 12.09International Telephone Numbers Adriatic Reg. Office 385-1-488-1120Australia 1800-668-670Baltic Reg. Office 37-1-67560226Belgium 32-2456-09-09Canada 1800-217-1617China 86-21-50800998Czech Republic 420-2-9657-9580France 33-155-381-700Germany 49-2159-8149-209Greece 30-210-67-79-099 Hong Kong 852-2919-1312Hungary 36-30-5052987India 91-22-26836733Israel 972-9-972-4400Italy 39-02-24137-324Japan 81-3-6430-2017Korea 82-2-3404-3600Lebanon 961-1-370-670Luxembourg 32-2456-09-09Netherlands 31-45-566-8800Poland 48-22-465-6942Russian Fed. 7-495-580-73 77Singapore 65-6776-6255South Africa 27-11-466-1820Spain 34-91-625-05-40UK 44-1923-205-166USA 1-904-296-9600。
Catalog # : 115879.00Model: M6C17FK80EProduct Type: AC MOTOR Stock: StockDescription: 1HP..1725RPM.56.TEFC./V.1PH.60HZ.CONT.MANUAL.40C.1.15SF.RIGID C.GENERAL PURPOSE.M6C17FK80EQuote: Price:Date: 05/14/2014Catalog # : 115879.00Model: M6C17FK80EProduct Type: AC MOTOR Stock: StockDescription: 1HP..1725RPM.56.TEFC./V.1PH.60HZ.CONT.MANUAL.40C.1.15SF.RIGID C.GENERAL PURPOSE.M6C17FK80EEngineering DataVolts115Volts208-230VoltsF.L. Amps12.8 F.L. Amps 6.4 F.L. AmpsS. F Amps13.6S. F Amps 6.8S. F AmpsRPM1800Hertz60HP1Duty CONTINUOUS TYPE CFKW0.75Frame56C Serv. Factor 1.15Phase1Max Amb40Design N Code KInsul Class B Protection MANUAL Therm.Prot.CEJ53CBEff 100%75Eff 75%PF68UL Y-(LEESON UL REC)CSA Yes Bearing OPE6203CC Number EXEMPT CE No Bearing PE6203Load Type Inverter Type Speed Range NONEMotor Wt.32 LB Enclosure TEFC Lubrication POLYREX EM Nameplate993500Mounting RIGID Rotation SELECTIVE CCW Assembly Shaft Dia.5/8 IN Ext. Diag.005003.03Cust Part No Outline028851-650Ext. Diag2Packaging B Outline Dash No Winding C634256Carton Label INDIVIDUAL GROUP :3Iris Paint305000.01Test Card01Form Factor RMS Amps Const TorqueSpeed RangeTorque PeakAB Code Peak@DegCResistanceConnectionRework Status Rework TYPEHazardous Loc NONE Brake MotorsExplosion Proof Temp Op Code FORCEClass GROUP VDCClass GROUP ADCBrake Coil OHMs @25 CPerformanceTorque UOM LB-FT Inertia (WK²)0Torque3(Full Load)7(Break Down) 6.7(Pull Up)9(Locked Rotor)CURRENT (amps) 6.4(Full Load)0(Break Down)0(Pull Up)33(Locked Rotor)Efficiency (%)0(Full Load)72.8(75% Load)69.7(50% Load)56(25% Load)PowerFactor0(Full Load)58(75% Load)45.6(50% Load)31.1(25% Load)Load Curve Data @60 HzVolts,1HorsepowerLoad Amps KW RPM Torque Eff PF Rise By Resis Frame Rise0.0 4.60.14817980.00.014.00.0-0.25 4.760.3417860.7556.031.10.0-0.5 5.170.5421774 1.569.745.60.0-0.75 5.80.7741762 2.2572.858.00.0-1.0 6.420.9931747 3.075.067.273.050.01.15 6.85 1.1351737 3.4575.072.00.0-1.257.56 1.2711728 3.7572.473.10.0-1.58.82 1.5521708 4.570.376.50.0-SOURCE: CALCULATED GROUP: 3 Load Curve Data @60HzVolts,1HorsepowerLoad Amps KW RPM Torque Eff PF Rise By Resis Frame RiseLoad Curve Data Not AvailableQuote: Price:Date: 05/14/20146/25/2009 4:28:12 AM。
This Quick Start Guide for your BIKEDRIVE AIR does not claim to be complete and is not exhaus -tive. For detailed information on the individual functions and the safety instructions, consult the Operating Manual or the website.SWITCHING THE SYSTEM ONBriefly press the On/Off button. When the system starts up, no support level is active. The bike behaves like a normal bicycle without support.After the system startup, the On/Off button can be used to switch the light on or off.DISPLAYING THE SOC OF THE BATTERYAfter startup, the state of charge (SOC) is continu -ously displayed by LEDs. If all 7 LEDs are lit, the battery is full.If the indicator flashes, the battery is being charged. If the battery charge is too low, no SOC is displayed. Instead, the white Status LED is lit. Once the battery charge gets too low, the bike switches off automatically.SWITCHING THE SYSTEM OFFPress the On/Off button for approximately 3seconds until the LED display turns off.RIDE MODENO LED IS LITThe motor support has been switched off. You can cycle as usual.POWERTAB FUNCTIONS LEVEL I - II - IIIThe selected support level is displayed with three bars. If no bar is lit, level Zero has been selected.The bike does not provide any support.As soon as you select a level, support is provided.Level III provides the strongest support. The higher the motor support, the lower the range.INDIVIDUALLY CONFIGURING THE SUPPORT LEVELS WITH THE CONNECT APPmaxon offers a Connect app for iOS and Android. With the Connect app, the rider can individually con -figure the support levels and use the cell phone as a display on the handlebar.LED DISPLAYWHITE (STATUS LED)The white Status LED is continuously lit as soon as the e-bike is switched on.GREEN (ACTIVE RANGE EXTENDER)When the green LED is on, an active Range Extender has been detected.BLUE (SERVICE LED)When the service tool switches the e-bike to ser -vice mode for diagnostics or system configuration,the blue Service LED is lit. In this mode, the bike does not provide any motor support.RED (ERROR LED)If the e-bike detects an error, the red Error LED lights up.To exit the fault condition, the e-bike must beswitched off and on.Decrease supportSupport levels: 0-I-II-IIIError LEDService LED Status LED Active RangeExtender Increase support On/Off button and light switchState of charge (SOC)POWERTABConnect appGoogle Play StoreiOS App StoreCHARGING THE BATTERY1)Select a cool location (observe the permissiblecharging temperature, see Chapter 5.3 of theOperating Manual).2)Connect the charger to the power socket.3)Connect the charger with the charging socketon the bike.4)The charging process starts automatically andthe progress is displayed via LEDs on the POW-ERTAB. The red LED of the charger is lit. Once the battery is fully charged, the indicator on the charger switches to green and the bike auto-matically switches off.5)Unplug the charger from the charging socket ofthe bike.6)Disconnect the charger from the power socket. CLEANING AND CARENever use a high-pressure cleaner.Instead, use a slightly moist cloth for cleaning. Make sure that none of the electrical components or the charging socket come into contact with water during the cleaning process.Close the cover of the charging port after each charging procedure. The charging port should be opened only for connecting a charger or Range Extender.The charging plug system does not work if it is wet.RANGE EXTENDERINSTALLING THE RANGE EXTENDER1)Switch the BIKEDRIVE AIR off.2)Check whether the special holder for the RangeExtender has been mounted in place. If not,please contact a specialist dealer.3)Insert the Range Extender into the holder fromthe side. Make sure that the notch on the bottle holder engages correctly with the RangeExtender.4)Secure the Range Extender with the rubberband.5)Open sockets on the frame and range extender.6)Connect the charging cable and lock it on bothsides with the bayonet.7)Function check: Range Extender and POW-ERTAB LEDs light up in green.Info: Switch on the Range Extender at the begin-ning of your tour to achieve the maximum range. CHANGING THE RANGE EXTENDER1)Switch off the BIKEDRIVE AIR.2)Disconnect the cable between the RangeExtender and charging socket.3)Close the socket on the range extender.4)Remove the rubber band from the RangeExtender.5)Tilt the battery sideways.6)Insert the new Range Extender.7)Check that the notch on the bottle cageengages correctly with the Range Extender. 8)Secure the Range Extender with the rubberband.9)Open the sockets on the frame and the RangeExtender.10)Connect the charging cable and lock it on bothsides with the bayonet.11)Function check: Switch on the Range Extenderat the beginning of your tour to achieve themaximum range.。
A combination of C2212 conforms to EN specificationEN60745-1、EN60745-2-3EN61000-6-4、EN61000-4-2、EN61000-4-3、EN61000-4-4EN61000-4-5、EN61000-4-6、EN61000-4-8、EN61000-4-11 Products are subject to change without notice.Thank you very much for purchasing Minimo ONE Series Ver. 2 Motor.This product is the Motor for Minitor Handpieces.Read carefully this instruction manual before use.Also read carefully the instruction manuals of head (Standard/Slender Rotary, and Anglon) D.C. power pack, and of foot switch. Please keep this instruction manual near the power pack for any operators to refer to whenever operating this system.If you lost your instruction manual, download it from our website. Introduction＊Hand Switch refers to the switch on the motor.●Read the precautions below to ensure safe use and handling. These precautions are intended toprotect you and others around you. Read and follow them carefully to avoid injury, damage to theproduct or damage to property.●Read carefully the instruction manual of this power pack, handpieces and foot switch.●Keep this instruction manual near the power pack for any operators to refer to whenever operating this system.■ About Warning and CautionSafety instructions are classified as Warning and Caution in accordance with the seriousness of the risk.■ About SymbolsThe symbols below have the following meanings.Cautions for handling and operationContents※This instruction manual is shared for every Minimo One Series Ver.2 motor. ・ＫＭ１１２ ・ＫＭ１１２Ｈ ・ＫＭ１１２Ｇ ・ＫＭ２１２ ・ＫＭ２１２Ｈ ・ＫＭ２１２Ｌ ・ＫＶ１１２Ｈ ・ＫＶ２１２ ・ＫＶ２１２Ｈ【Allowed Powerpack】 C2012/C2112/C2212 Only (Minimo One Series Ver.2 since 2013) Not available with all the other powerpacksfig-４.Speed / Torque Curve Load torque（cN･m）●Hand Switch The hand switch enables quick start/stop operation. This is very useful if you often make the start/stop operation and/or you work away from the powerpack ●Mounting Handpiece Identification Resistor The handpiece mounts a handpiece identification resistor corresponded to the handpiece identification function on Minimo One Series Ver.2 powerpacks. This function optimally controls rotation speed and torque of the handpiece.●Removable Handpiece The motor and head part are removable. So, you can select motors and heads for your own purpose.●Curl Cord As the curl cord is elastic, it does not interrupt your work.IntroductionSafety Precautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・１～２Contents ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・３１. Confirmation of this product ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・３２. Equipment Features・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・３３. Specifications・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・３４. Names of Each Component・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・５５. Operating Procedure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・５ ５-１ Atataching the head to the motor ５-２ Connecting to Powerpack ５-３ Operation of Hand Switch６. Replacement of Carbon Brush (Curl Cord)・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・６７. Accessories ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・７８. Trouble Shooting ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・７９. Maintenance and inspection ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・７Motor ※The picture above is KM212H.fig-３.System configuration table fig-１Please make sure of standardequipments and accessories inside. D.C. POWER PACKHandpiece Foot SwitchＡＣ Cord CA20/CA21CA22fig-２A Motor is only included.Except the Motor, please purchase individually.Carbonbrush 1set （２pieces）Operation Manual■Over load function when the motor is locked ・Danger avoidance function The overload funciton will operate if its collet chuck opens or the load is stable.●Usual overload. ・Opened collet chuck. ⇒ Switch ON ⇒ Overload caution.（5 sec） ⇒ Overload(Stop)●Over load in case that its collet chuck opens. ・Opened collet chuck. ⇒ Switch ON ⇒ 15 sec ⇒ Overload caution.（5 sec） ⇒ Overload(Stop)●Trouble shooting in case that the danger avoidance function operates under constant load. ・A constant load process(15 sec). ⇒ Overload caution. ⇒ Set to no-load condition within 5 seconds. ⇒ Danger avoidance function is reset.※The time by the caution and the load displacement can be changed.Please ask to Minitor for changing.※If the symptom is not improved after corrective action, the handpiece might be defective. Please ask for repair.※Any other troubles or obscure points, please contact our minitor dealer.Condition Investigation Corrective actionMotor does not run.Please plug an AC cord.Is an AC cord unplug?Motor is overheated while running.Please replace e equivalent fuse.Is a fuse blown?Use the handpiece within the green lights ofthe load meter on the powerpack.Do you use the handpiece with excessive loads?Unusual noise and/or vibration occurs.Ask us for repair.Make sure if the noise and/or vibration occurs when the handpiece runs in slow rotation speed.Replace carbon brushes.Are the carbon brushes worn away?Please close the collet of the handpiece.Is a fuse blown?While a foot switch is connected with the powerpack,the start/stop operation is done only by the foot switch.Is a foot switch connected with the powerpack?Hand switch does not work.●Please check if there is some damage or not on the case and cord.●Please check if there is accumulated dust, oil, water and so on or not.※Please maintain and inspect a handpiece.Ｒｕｂｂｅｒ ＣｒａｄｌｅＲＭ１１Carbonbrush 1set （２pieces）。
SINGLE PHASE, 56C FRAME, TEFC1/3 HP—2 HP; 2 or 4-Pole High Starting TorquesCapacitor Start / Capacitor Run Design Rolled Steel Construction Removable FeetSINGLE PHASE, COMPRESSOR DUTY, ODP3 HP–5 HP; 2 or 4-Pole High Starting TorqueCapacitor Start / Capacitor Run Design Rolled Steel ConstructionTHREE -PHASE, 56C FRAME, TEFC1/3 HP—3 HP; 2 or 4-Pole High Starting Torque Rolled Steel Construction Removable FeetTHREE -PHASE, TEFC1 HP—10 HP;2 or 4-Pole High Starting Torque Rolled Steel ConstructionTHREE -PHASE, OPEN DRIP PROOF1 HP—20 HP;2 or 4-Pole High Starting Torque Rolled Steel ConstructionWASHDOWN DUTY MOTORS STAINLESS STEEL1/3 HP—20 HP; 2, 4 or 6-Pole C -Flange w/ Feet or Round Body Inverter Duty (20:1 VT; 10:1 CT)CLOSE COUPLED PUMP MOTORS1 HP—75 HP;2 or 4-Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)EXPLOSION PROOF MOTORS1—250 HP; 2, 4 or 6-PoleAll Motors Meet or Exceed UL 674 SpecificationAs Required By OSHA For Installation and Use In Hazardous LocationsTotally Enclosed Explosion Proof (TEXP) Inverter Rated (10:1 VT; 5:1 CT)OIL WELL PUMP MOTORS, TEFC2 HP—150 HP; 6 or 8-PoleNEMA Design D; High Slip (5%—8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)OIL WELL PUMP MOTORS, ODP7.5 HP—100 HP; 6-PoleNEMA Design D; High Slip (5%—8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)VERTICAL HOLLOW SHAFT PUMP MOTORS10 HP—500 HP; 4-PoleExtra High Thrust / Double Stacked Bearings AvailableInverter Rated (10:1 VT) or Inverter Duty (20:1 VT)ROTARY UNIT MOTOR FOR ROTARY PHASE CONVERTER3 HP—60 HP; 4-PoleFor Use with Rotary Phase Converters To Run Three Phase Equipment From Single Phase PowerTotally Enclosed Fan CooledSHAFT MOUNT REDUCERS & ACCESSORIES2—10 Box SizeGear Ratios: 15:1 or 25:1Screw Conveyor Adaptors Available Repair Kits Also AvailableCONTROLS:Safety/Disconnect Switches Across the Line Starters (ATL) Part Wind Starters (PWS) Soft StartersVFDs (Available in NEMA 3R, 4, 4X and 12)MOTOR SLIDE BASESAvailable 56—505U FrameSingle -Adjusting Screw Type (56—145T Frame) Double -Adjusting Screw Type (182T—505U Frame)GENERAL PURPOSEINVERTER DUTY MOTORS1 HP—300 HP; 2, 4, 6 or 8-Pole NEMA Design BTotally Enclosed Fan Cooled or Open Drip ProofInverter Duty (20:1 VT; 10:1 CT)ALUMINUM FRAMEINVERTER DUTY MOTORS1 HP—10 HP;2 or 4-Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)SINGLE PHASE, FARM DUTY, TEFC1/3 HP—10 HP; 2 or 4-Pole High Starting TorquesManual Overload Protection (1/3 HP—5 HP) Capacitor Start / Capacitor Run Design Rolled Steel ConstructionCRUSHER DUTY MOTORS1 HP—600 HP; 4, 6 or 8-Pole NEMA Design CTotally Enclosed Fan CooledInverter Duty (20:1 VT; 10:1 CT) (1 HP—300 HP) Inverter Rated (10:1 VT; 5:1 CT) (250 HP—600 HP)ROUND BODY MOTORS1 HP—30 HP; 4-Pole; 1800 RPM C -Flange without FeetTotally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)SAFETY SWITCHES – HEAVY DUTY30 AMP—1200 AMP 480 VAC / 600 VAC3-Pole / 3-Wire / Non -Fused or Fused NEMA 3R EnclosureVFD–ECONOMY1 HP—800 HP Variable Torque ½ HP—600 HP Constant Torque Siemens Series DriveNon -Combo, Circuit Breaker or Fused NEMA 3R, 4, 4X or 12 EnclosureSOFT STARTERS–CRUSHER/ULTRA20 HP—800 HPSAF MS6 Series DevicesUltra Heavy Duty (500% FLA for 30 Seconds) Full Start -Rated ContactorCircuit Breaker w/ Through Door NEMA 3R or 4/12 EnclosureSOFT STARTERS15 HP—300 HPSiemens 3RW40 Series Device Normal Duty or Heavy Duty Non -Combo or Circuit Breaker NEMA 3R, 4X or 4/12 EnclosurePART WIND STARTERS10 HP—200 HPIEC Rated Contactors Circuit Breaker or Fused NEMA 3R EnclosureACROSS THE LINE START-ERSNEMA 1—NEMA 5NEMA Full Rated ContactorCircuit Breaker or Fused w/ FlangedVFD–STANDARD1 HP—800 HP Variable Torque ½ HP—600 HP Constant Torque Siemens Series Drive Circuit Breaker or FusedNEMA 3R, 4, 4X or 12 EnclosureVFD–POSITIVE DISPLACEMENT PUMP3 HP—600 HPSiemens Series Drive Constant TorqueCircuit Breaker w/ Flanged NEMA 3R EnclosureVFD–IRRIGATION1 HP—800 HPSiemens Series Drive24/7 Programmable & 0—10 Backspin Timer Variable TorqueCircuit Breaker or Fused NEMA 3R EnclosureVFD–SUBMERSIBLE½ HP—200 HPSiemens Series Drive24/7 Programmable & 0—10 Backspin Timer Variable TorqueCircuit Breaker or Fused NEMA 3R EnclosureVFD–WASHDOWN/STAINLESS1 HP—200 HP Variable Torque ½ HP—150 HP Constant Torque Siemens Series Drive Circuit Breaker or Fused NEMA 4X EnclosureVFD–BEAM PUMP1 HP—200 HPSiemens Series Drive ReGen Avoidance Design Constant TorqueCircuit Breaker w/ Flanged NEMA 3R EnclosureCUSTOM PANELSMotor Controls Panel Customization Made EasyNAE Motor Controls offers customers the ability to custom configure and order their control panel to meet their specific needs and have it shipped quickly. All NAE packaged panels are backed by our 2 year warranty and eligible for up to 6 years of protection with the “NO Hassle ” Chassis Exchange program.NO Hassel Bumper to Bumper Chassis Exchange ProgramOptional three (3) year Warranty with Lightning & Surge Protection including NAE ’s “No Hassel ” Chassis Exchange program.Scan or visit our website at to learn more.。
