MS8261MS8264

RackSwitch G8264Product Guide (withdrawn product)The RackSwitch™ G8264 that leverages 10Gb SFP+ and 40Gb QSFP+ Ethernet technology is specifically designed for the data center. It is ideal for today's big data, cloud, and optimized workload solutions. It is an enterprise class Layer 2 and Layer 3 full featured switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data. Large data-center grade buffers help keep traffic moving, while the redundant power and fans along with numerous high availability features help provide high availability for business sensitive traffic.The RackSwitch G8264, shown in Figure 1, is ideal for latency sensitive applications such as high performance computing clusters and financial applications. In addition to the 10 Gb Ethernet (GbE) and 40 GbE connections, the G8264 also has the capability for traditional 1 GbE connections. The G8264 supports the newest protocols including Data Center Bridging/Converged Enhanced Ethernet (DCB/CEE) for Fibre Channel over Ethernet (FCoE) in addition to iSCSI and network-attached storage (NAS).Figure 1. RackSwitch G8264Did you know?The G8264 supports Virtual Fabric, which helps clients significantly reduce cost and complexity related to I/O requirements of many virtualization deployments. Virtual Fabric helps reduce the number of multiple I/O adapters to a single dual-port 10 G adapter and reduces the number of cables and required upstream switch ports. By using Virtual Fabric, you can carve a dual-port 10 G server adapter into 8 virtual network interface cards (vNICs) and create dedicated virtual pipes between the adapter and switch for optimal performance, higher availability, and improved security. With Virtual Fabric, you can make dynamic changes and allocate bandwidth per vNIC so that you can adjust it over time without downtime.The RackSwitch G8264 is the first 10 GbE switch to offer benefits of OpenFlow. OpenFlow is the new open application programming interface (API) that enables the network administrator to easily configure and manage virtual networks that control traffic on a “per-flow” basis. It creates multiple independent virtual networks and related policies without dealing with the complexities of the underlying physical network and protocols. With OpenFlow, clients can easily create user-controlled virtual networks, optimize performance dynamically, and minimize complexity when used with an industry compliant OpenFlow controller.Click here to check for updatesFigure 2. Front panel of the RackSwitch G8264Figure 3. Rear panel of the RackSwitch G8264Network cabling requirementsThe network cables that can be used with the switch are listed in Table 5.Table 5. G8264 network cabling requirementsTransceiver Standard Cable Connector 40 Gb Ethernet40GBASE-SR4 QSFP+ Transceiver (49Y7884)40GBASE-SR410 m or 30 m MTP fiber optics cables supplied by Lenovo(see Table 3); support for up to 100 m with OM3 multimodefiber or up to 150 m with OM4 multimode fiberMTP40GBASE-LR4 QSFP+Transceiver (00D6222)40GBASE-LR41310 nm single-mode fiber cable up to 10 km LCDirect attach cable40GBASE-CR4QSFP+ to QSFP+ DAC cables up to 7 m; QSFP+ to 4xSFP+ DAC break-out cables up to 5 m for 4x 10 GbE SFP+connections out of a 40 GbE port (see Table 3)QSFP+ 10 Gb Ethernet10GBASE-SR SFP+ Transceiver (46C3447)10GBASE-SR Up to 30 m with fiber optic cables supplied by Lenovo (seeTable 3); 850 nm OM3 multimode fiber cable up to 300 m orup to 400 m with OM4 multimode fiberLC10GBASE-LR SFP+Transceiver (90Y9412)10GBASE-LR1310 nm single-mode fiber cable up to 10 km LC10GBASE-ER SFP+Transceiver (90Y9415)10GBASE-ER1310 nm single-mode fiber cable up to 40 km LC Direct attach cable10GSFP+Cu SFP+ DAC cables up to 7 m (see Table 3)SFP+ 1 Gb Ethernet1000BASE-T SFPTransceiver (00FE333)1000BASE-T UTP Category 5, 5E, and 6 up to 100 meters RJ-451000BASE-SX SFP Transceiver (81Y1622)1000BASE-SX Up to 30 m with fiber optic cables supplied by Lenovo (seeTable 3); 850 nm multimode fiber cable up to 550 m (50 µ)or up to 220 m (62.5 µ)LC1000BASE-LX SFPTransceiver (90Y9424)1000BASE-LX1310 nm single-mode fiber cable up to 10 km LC Management ports1 GbE management port1000BASE-T UTP Category 5, 5E, and 6 up to 100 meters RJ-45 RS-232 management port RS-232DB-9-to-mini-USB or RJ-45-to-mini-USB console cable(comes standard with the switch)Mini-USB WarrantyFigure 4. 10 GbE port aggregationFigure 5. 1 GbE port aggregationFigure 6. The 2560-node logical designFigure 7. The Virtual Fabric logical designFigure 8. IP storage connectivityTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®BladeCenter®Flex SystemIntelligent ClusterLenovo ServicesNeXtScaleNeXtScale System®RackSwitchSystem x®VMready®iDataPlex®The following terms are trademarks of other companies:Microsoft® and Hyper-V® are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others.。

PRODUCT DATAPut Bar Code Here63-2584-10MS4120F; MS4620F; MS8120F; S2024-F; S20230-F Fast-Acting, Two-Position ActuatorsAPPLICATIONThe MS4120F , MS4620F , MS8120F , S2024-F , and S20230-F Fast-Acting, T wo-Position Actuators are spring return direct coupled actuators (DCA) for on/off damper control. The actuator accepts an on/off signal from a single-pole, single-throw (spst) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.Designed to operate reliably in smoke control systemsrequiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F .APPLICABLE LITERATURE—Specification Data Sheet63-2592—Motor/Actuator Selection Guide for Damper Applications63-8419—Engineering Manual of Automatic Control (also called The Gray Manual)77-1100—Direct Coupled Actuator Quick Selection Guide 63-8553—Damper T orque Calculator63-8437FEATURES•175 lb-in. (20 Nm) minimum driving torque at 350°F (176°C).•Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation.•Integral spring return ensures level of return torque.•Stainless steel internal spring.•Fifteen-second spring return timing.•No special cycling required during long-term holding. (See Operation section.)•No audible noise during holding.•Patent pending design eliminates need for limit switches to reduce power consumption.•Models available for 24, 120, and 230 Vac applications.•Ninety-five degree angle of rotation.•Actuator holds rated torque at reduced power level.•Die-cast aluminum housing.•Housing design allows flush mounting to damper.•Self-centering shaft adapter (SCSA), patent pending.•Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350°F.MS4120F, MS4620F, MS8120F•High temperature Teflon ® lead wires.•Models available with integral high temperature (350°F) SPST position-indicating switches (7°, 85° stroke).S2024-F, S20230-F•Double-insulation rating.•High-temperature, halogen-free, silicone-free leadwires.•Models available with integral high temperature (350°F)SPDT position-indicating switches (7°, 85° stroke).MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS63-2584—102SPECIFICATIONSModels: See Tables 1, 2, and 3.Table 1. Models.aInternal switches are designed to pass UL555Srequirements (at 350°F).Dimensions: See Fig. 1.Device Weight:MS4120F , MS4620F , S20230-F: 7.5 lb (3.4 kg)MS8120F , S2024-F: 6.25 lb (2.8 kg)Stroke: 95° ± 3°, mechanically limited.Electrical Ratings:Power Input:MS4120F: 120 Vac ±10%, 60 Hz.MS4620F ,S; S20230-F: 230 Vac ±10%, 50/60 Hz.MS8120F ,S; S2024-F: 24 Vac +20%, -10%, 50/60 Hz (Class 2).Power Consumption:MS4120F: Driving: 0.35A, 35W. Holding: 0.15A, 10W.MS4620F ,S; S20230-F:Driving: 0.20A, 35W. Holding: 0.14A, 10W.MS8120F ,S; S2024-F: Driving: 45 VA. Holding: 10 VA.Electrical Connections:Lead Wires:MS4120F , MS4620F , MS8120F: 1m T eflon wire.MS4620S, MS8120S, S2024-F , S20230-F: 1m halogen-free, silicone-free wire.T wo integral 3/8 in. flexible conduit connections.Timing (At Rated Torque and Voltage):Drive Open: 15 seconds typical.Spring Close: 15 seconds typical.Auxiliary Switches:Dry ContactRatings (maximum load): 250 Vac, 5A resistive.Settings (fixed): 7° nominal stroke, 85° nominal stroke.Torque Rating (at Rated Voltage):T ypical Holding (minimum at 350°F): 175 lb-in. (20 Nm).Spring Return (minimum at 350°F): 175 lb-in. (20 Nm).Stall Maximum (fully open at 75°F): 425 lb-in. (48.0 Nm).350°F Minimum Driving: 175 lb-in. (20 Nm).Design Life (at Rated Voltage): 30,000 full stroke cycles.Minimum Damper Shaft Length:1 in. (25 mm); 3-1/4 (83 mm) recommended.Cycling Requirements:Prolonged holding-period (1 year) testing of these actuators has been performed with no spring return failures. The actuator and the internal spring are designed to require no special cycling during long-term holding.Honeywell recommends following all local, state and national codes for periodic testing of the entire smoke control system. Refer to National Fire Protection Association (NFP A) National Fire Codes®: NFP A90A, NFP A92A and NFP A92B for your application.NFP A recommends periodic examination of each fire/smoke damper (semi-annually or annually) to ensure proper performance.Mounting: Self-centering shaft adapter.Round Damper Shafts: 0.5 to 1.06 in.Square Damper Shafts: 1/2 to 3/4 in.Actuator can be mounted with shaft in any position.IMPORTANT•Honeywell does not recommend using linkages with these actuators because side-loading of the output hub reduces actuator life.•3/4 in. or greater shaft diameter recommended.Noise Rating at 1m (Maximum):Driving or Spring Return: 70 dBA.Holding: 20 dBA (no audible noise).Vibration:Not suitable for high vibration applications (Example installa-tion environment: T ruck Trailers or Railroad Cars)Acceptable Vibration Levels 0.6g at 30 to 300 Hz.Temperature Ratings:Ambient: -40°F to 130°F (-40°C to 55°C).Shipping and Storage: -40°F to 140°F (-40°C to 60°C).IMPORTANTThe actuator is designed to meet UL555S standards at 350°F (176°C). The actuator must be tested with the damper to achieve this rating.NOTE:The actuator is designed to operate for 30 min-utes during a one-time excursion to 350°F (176°C).Humidity Ratings: 5% to 95% RH noncondensing.Environmental Protection Ratings:NEMA2 and IP54 when mounted on a horizontal shaft and the base of the actuator below the shaft.Accessories:205649 Mounting Bracket (not supplied with actuator).Approvals: See Table 4.Controller Type:MS4120F: Line voltage (120 Vac), 2-position, spst (Series 40).MS4620F ,S; S20230-F: Line voltage (230 Vac), 2-position, spst (Series 40).MS8120F ,S; S2024-F: Low voltage (24 Vac), 2-position, spst (Series 80).ModelVoltage in Vac Internal Auxiliary Switches MS4120F1006120None MS4120F1204120 2 SPST a MS4620F1005230None MS4620F1203230 2 SPST a MS8120F100224None MS8120F120024 2 SPST a S2024-F (MS8120S1006)24NoneS20230-F (MS4620S1009)230S2024-F-SW2 (MS8120S1204)242 SPDT a S20230-F-SW2 (MS4620S1207)230MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS363-2584—10Table 4. Approvals.a Plenum applications require that conductors be enclosed inconduit (see Wiring section for conduit details).Fig. 1. Dimensional drawing of actuator in in. (mm).Table 2. Actuator Selection (MS Series)M Electrical MotorS Fail Safe Function (Spring Return)41120 Vac 2-position Control; Reversible MountSpring Return 46230 Vac 2-position Control; Reversible MountSpring Return 8124 Vac 2-position Control; Reversible MountSpring Return20175 lb-in. (20 Nm)F Fire and Smoke (US)1No Feedback0No Auxiliary Switches 2T wo Auxiliary SwitchesXX System Controlled NumbersM S 4120F 12XXTable 3. Actuator Selection (S20 Series).S Fail Safe Function (Spring Return)2020 Nm (175 lb-in.)2424 Vac 2-position Control; Reversible Mount Spring Return230230 Vac 2-position Control; Reversible MountSpring ReturnF Fire and Smoke ActuatorNo Auxiliary Switches-SW2T wo Auxiliary SwitchesS 2024-F -SW2MS4120F MS4620F,MS8120F S20230-FS2024FUL/cULXX UL873 Plenum Rating, File No. E4436; Guide No. XAPX.a X XCE X X C-TICKXXXMS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS63-2584—104INSTALLATIONWhen Installing this Product...1.Read these instructions carefully. Failure to followthem could damage the product or cause a hazardous condition.2.Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.3.Installer must be a trained, experienced service technician.4.After installation is complete, check out product operation as provided in these instructions.WARNINGElectrical Power Hazard.Line voltage can cause death or serious injury and short equipment circuitry.Disconnect power supply before installation.Low voltage can shock individuals or short equipment circuitry.Disconnect power supply before installation.IMPORTANTAll wiring must agree with applicable codes, ordinances and regulations.Locationsecures it flush to a damper box (see Fig. 2).NOTE:When mounted correctly, these slots allow theactuator to float without rotating relative to the damper shaft.Tightly securing actuator to damper housing can damage actuator.Mount actuator to allow it to float along its vertical axis.PreparationBefore mounting the actuator onto the damper shaft, determine the:—Damper/valve opening direction for correct spring return rotation. The actuator can be mounted to provide clockwise or counterclockwise spring return.—Damper shaft size (see Specifications section).Determine Appropriate Mounting OrientationSee Fig. 2 for mounting orientation.NOTES:—Actuators are shipped in the fully closed position.—An arrow molded into the hub points to tick marks on the label to indicate the hub rotary position.—See Fig. 3 for proper mounting to a square damper shaft.Fig. 2. Spring Return DCA mounting orientation.Fig. 3. Proper mounting to square damper shaft.Measure Damper/Valve Shaft LengthIf the shaft is less than three inches in length, the shaft coupling must be located between the damper/valve andactuator housing. If the shaft length is more than three inches, the shaft coupling may be located on either side of the actuator housing.If the coupling must be moved from one side of the actuator to the reverse, follow these instructions (see Fig. 4):1.Remove the retainer clip from the shaft coupling and setit aside for later use.2.Remove shaft coupling from one side of the actuator.3.Replace the shaft coupling on the opposite side of theactuator aligning it based on the stroke labelling.4.Replace the retainer clip on the shaft coupling using thegroove of the coupling.MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS563-2584—10Fig. 4. Mounting shaft coupling to actuator opposite side.MountingImproper shaft coupling tightening causes device malfunction.Tighten shaft coupling with proper torque to preventdamper shaft slippage.Using actuator as shaft bearing causes device damage.Use actuator only to supply rotational torque. Avoid any side loads to actuator output coupling bearings.T o mount actuator, proceed as follows:1.Place actuator over damper shaft; and hold mountingbracket in place. See Fig. 5.2.Mark screw holes on damper housing.3.Remove actuator and mounting bracket.4.Drill or center-punch holes for mounting screws (or useno.10 self-tapping sheet metal screws).NOTE:If necessary, use a field-fabricated steel baseplate secured with sheet metal screws.5.Turn damper blades to desired normal (closed) position.6.Place actuator and mounting bracket back into position and secure bracket to damper box with sheet metal screws.7.Using 10mm wrench, tighten shaft coupling securely onto damper shaft using minimum 120 lb-in., maximum 180lb-in. torque.Fig. 5. Mounting actuator to damper housing.MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS63-2584—106Manual PositioningThe actuator can be operated with no power present. Use this feature during installation or to move and lock the damper or valve shaft position when there is no power.T o operate the manual positioning:1.If the power is on, turn it off.2.Insert supplied hex wrench (key) as shown in Fig. 6.3.Rotate key in the direction indicated on the cover.4.Once the desired position is reached, hold the key toprevent the spring return from moving the actuator.NOTE:No detente for fire and smoke actuators. If keyis released, actuator will return to spring closed position.Fig. 6. Manual positioning.WIRINGSee Fig. 7 through 11 for typical wiring diagrams.WARNINGElectrical Power Hazard.Line voltage can cause death or serious injury and short equipment circuitry.Disconnect power supply before installation.Disconnect all power supplies before installation.Motors with auxiliary switches can have more than one disconnect.IMPORTANT1.All wiring must comply with local electrical codes, ordinances and regulations.2.Voltage and frequency of transformer used with MS8120F ,S and S2024-F must correspond with the characteristics of power supply and actuator.NOTE:The conduit fittings are designed for use with 3/8in. reduced-wall steel or aluminum flexible con-duit.Fig. 7. Typical 24 Vac wiring (MS Series).Fig. 8. Typical 120 Vac wiring (MS Series).Fig. 9. Typical 230 Vac wiring (MS Series).MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS763-2584—10Fig. 10. Typical 24 Vac wiring (S20 Series).Fig. 11. Typical 230 Vac wiring (S20 Series).MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS63-2584—108OPERATIONThe actuators are designed for use in Smoke ControlSystems. If power fails, the actuator spring returns to the 0° position. The actuator mounts flush with the damper box. The actuator drives from 0° to 95° and spring returns back to 0°.The actuators are operated by an spst two-position controller. When using an spst two-position controller, the actuator drives to the damper fully open position when controller contact makes and spring returns to the damper fully closed position when controller contact breaks. The actuator drops to holding power level on detection of stall, independent of hub position.CyclingThe actuator and the internal spring are designed so that no special cycling during long-term holding is required.Honeywell recommends following all local, state, and national codes for periodic testing of the entire smoke control system. Refer to National Fire Protection Association (NFP A) National Fire Codes ®: NFP A90A, NFP A92A, and NFP A92B for your application.Auxiliary SwitchesSome models include auxiliary switches (see Table 1).SPST Switches (Table 5)See Fig. 7 through 9 for SPST auxiliary switch wiring.Table 5. SPST Auxiliary Switch Operation.NOTE:Both sets of contacts are open when the actuatoris between 7° and 85°.SPDT Switches (Fig. 12)See Fig. 10 through 12 for SPDT auxiliary switch wiring.Fig. 12. SPDT auxiliary switch operation.CHECKOUTMS4120F (120 Vac model)1.Check damper position.2.Connect 120 Vac to the black and white leadwires to drive the damper to the open position. The actuator should drive the damper.3.If the actuator does not run, remove power for at least two seconds.4.If the actuator spring returns, allow it to close entirely, then return to step 2.5.If the actuator does not spring return, verify that the actuator is properly installed. See Installation section.6.If the actuator is correctly installed but neither runs nor spring returns, replace the actuator.MS4620F; S20230-F (230 Vac models)1.Check damper position.2.Connect 230 Vac to the blue and brown leadwires to drive the damper to the open position. The actuator should drive the damper.3.If the actuator does not run, remove power for at least two seconds.4.If the actuator spring returns, allow it to close entirely, then return to step 2.5.If the actuator does not spring return, verify that the actuator is properly installed. See Installation section.6.If the actuator is correctly installed but neither runs nor spring returns, replace the actuator.MS8120F; S2024-F (24 Vac models)1.Check damper position.2.Connect 24 Vac to the red and black leadwires to drive the damper to the open position. The actuator should drive the damper.3.If the actuator does not run, remove power for at least two seconds.4.If the actuator spring returns, allow it to close entirely, then return to step 2.5.If the actuator does not spring return, verify that the actuator is properly installed. See Installation section.6.If the actuator is correctly installed but neither runs nor spring returns, replace the actuator.Switch Wire Color MakesBreaks (degrees from fully closed position)7°blue less than 7greater than 785°yellowgreater than 85less than 85MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORSD Montageanweisung NL Installatievoorschrift SF AsennusohjeF Instructions d’Installation DK Installasjonsinstruks S Installations InstrukionerI Istruzioni per I’Installazione N Installationsinstrukioner E Instrucciones de montage963-2584—10MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS63-2584—1010MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORS1163-2584—10MS4120F; MS4620F; MS8120F; S2024-F; S20230-F FAST-ACTING, TWO-POSITION ACTUATORSAutomation and Control SolutionsHoneywell International Inc.1985 Douglas Drive North Golden Valley, MN 55422 ® U.S. Registered T rademark© 2012 Honeywell International Inc. 63-2584—10 M.S. Rev. 03-12 Printed in United StatesT eflon® is a registered trademark of the E.I. du Pont de Nemours and Company.National Fire Codes® is a registered trademark of the National Fire Protection Association (NFP A).。

S8261和DW01锂电池保护板的主要参数锂电池保护板主要由保护IC和MOS管构成（1）保护IC主要参数1) 封装2) 过充电压3) 过充释放电压4) 过放电压5) 过放释放电压6) 耐压(2) MOSFET主要参数1) N沟、P沟2) 内阻3) 封装（TSSOP8 <简称薄片> 、SOP8<简称厚片>、SOT23-6等）4) 耐电流5) 耐电压6) 内部是否连通锂电池保护板的工作原理锂电池保护板根据使用IC,电压等不同而电路及参数有所不同,保护板有两个核心部件：一块保护IC，它是由精确的比较器来获得可靠的保护参数；另外是MOSFET 串在主充放电回路中担当高速开关，执行保护动作。

下面以DW01 配MOS管8205A进行讲解: 激活保护板的方法：当保护板P+、P-没有输出处于保护状态，可以短路B-、P-来激活保护板，这时，Dout、Cout均会处于低电平（保护IC此两端口是高电平保护，低电平常态）状态打开两个MOS 开关。

1.锂电池保护板其正常工作过程为: 当电芯电压在2.5V至4.3V之间时，DW01 的第1脚、第3脚均输出高电平(等于供电电压)，第二脚电压为0V。

此时DW01 的第1脚、第3脚电压将分别加到8205A的第5、4脚，8205A 内的两个电子开关因其G极接到来自DW01 的电压，故均处于导通状态，即两个电子开关均处于开状态。

此时电芯的负极与保护板的P-端相当于直接连通，保护板有电压输出。

2.保护板过放电保护控制原理: 当电芯通过外接的负载进行放电时,电芯的电压将慢慢降低,同时DW01 内部将通过R1电阻实时监测电芯电压,当电芯电压下降到约2.3V时DW01 将认为电芯电压已处于过放电电压状态，便立即断开第1脚的输出电压，使第1脚电压变为0V，8205A内的开关管因第5脚无电压而关闭。

此时电芯的B-与保护板的P-之间处于断开状态。

商品编码部件产品名称Q1对应编码Q1对应配件名称CPUSPT0CPU0002H Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4809v2(6C,105W,1.9GHz)Processor Option Kit BCX305XeonE7-4809v2(1.9GHz/6c)/6.4GT/12ML3 SPT0CPU0002I Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4820v2(8C,105W,2.0GHz)Processor Option Kit BCX306XeonE7-4820v2(2.00GHz/8c)/7.2GT/16ML3 SPT0CPU0002J Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4830v2(10C,105W,2.2GHz)Processor Option Kit BCX307XeonE7-4830v2(2.2GHz/10c)/7.2GT/20ML3 SPT0CPU0002K Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4850v2(12C,105W,2.4GHz)Processor Option Kit BCX308XeonE7-4850v2(2.3GHz/12c)/7.2GT/24ML3 SPT0CPU0002L Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4860v2(12C,130W,2.6GHz)Processor Option Kit BCX309XeonE7-4860v2(2.6GHz/12c)/8.0GT/30ML3 SPT0CPU0002M Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4870v2(15C,130W,2.3GHz)Processor Option Kit BCX310XeonE7-4870v2(2.3GHz/15c)/8.0GT/30ML3 SPT0CPU0002N Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4880v2(15C,130W,2.5GHz)Processor Option Kit BCX311XeonE7-4880v2(2.5GHz/15c)/8.0GT/37.5ML3 SPT0CPU0002O Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4890v2(15C,155W,2.8GHz)Processor Option Kit BCX312XeonE7-4890v2(2.8GHz/15c)/8.0GT/37.5ML3 SPT0CPU0002P Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8857v2(12C,130W,3.0GHz)Processor Option Kit XeonE7-8857v2-Xeon3_8.0G_30M_12CSPT0CPU0002Q Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8850v2(12C,105W,3.0GHz)Processor Option Kit BCX437XeonE7-8850v2-Xeon2.3_7.2G_24M_12C SPT0CPU0002R Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8870v2(15C,130w,2.3GHz)Processor Option Kit XeonE7-8870v2-Xeon2.3_8.0G_30M_15CSPT0CPU0002S Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8891v2(10C,155W,3.2GHz)Processor Option Kit XeonE7-8891v2-Xeon3.2_8G_37.5M_10CSPT0CPU0002T Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8893v2(6C,155W,3.4GHz)Processor Option Kit XeonE7-8893v2-Xeon3.4_8G_37.5M_6CSPT0CPU0002U Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4809v3(8C,115W,2.0GHz)Processor Option Kit BCX377XeonE7-4809v3(2.0GHz/8c)/6.4GT/20ML3 SPT0CPU0002V Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4820v3(10C,115W,1.9GHz)Processor Option Kit BCX376XeonE7-4820v3(1.9GHz/10c)/6.4GT/25ML3 SPT0CPU0002W Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4830v3(12C,115W,2.1GHz)Processor Option Kit BCX375XeonE7-4830v3(2.1GHz/12c)/8.0GT/30ML3 SPT0CPU0002X Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4850v3(14C,115W,2.2GHz)Processor Option Kit BCX374XeonE7-4850v3(2.2GHz/14c)/8.0GT/35ML3 SPT0CPU0002Y Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8860v3(16C,140W,2.2GHz)Processor Option Kit BCX373XeonE7-8860v3(2.2GHz/16c)/9.6GT/40ML3 SPT0CPU00030Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8870v3(18C,140W,2.1GHz)Processor Option Kit BCX372XeonE7-8870v3(2.1GHz/18c)/9.6GT/45ML3 SPT0CPU00032Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8880v3(18C,150W,2.3GHz)Processor Option Kit BCX371XeonE7-8880v3(2.3GHz/18c)/9.6GT/45ML3 SPT0CPU00033Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8890v3(18C,165W,2.5GHz)Processor Option Kit BCX370XeonE7-8890v3(2.5GHz/18c)/9.6GT/45ML3 SPT0CPU0002Z Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8867v3(16C,165W,2.5GHz)Processor Option Kit BCX369XeonE7-8867v3(2.5GHz/16c)/9.6GT45ML3 SPT0CPU00034Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8891v3(10C,165W,2.8GHz)Processor Option Kit BCX368XeonE7-8891v3(2.8GHZ/10c)/9.6GT/45ML3 SPT0CPU00035Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8893v3(4C,140W,3.2GHz)Processor Option Kit BCX367XeonE7-8893v3(3.2GHz/4c)/9.6GT/45ML3 SPT0CPU00003Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2609v3(6C,85W,1.9GHz)Processor Option Kit BCX323E5-2609v3(1.9GHz/6c)/6.4GT/15ML3SPT0CPU00004Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2620v3(6C,85W,2.4GHz)Processor Option Kit BCX324E5-2620v3(2.4GHz/6c)/8GT/15ML3SPT0CPU00005Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2630v3(8C,85W,2.4GHz)Processor Option Kit BCX325E5-2630v3(2.4GHz/8c)/8GT/20ML3SPT0CPU00006Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2637v3(4C,135W,3.5GHz)Processor Option Kit E5-2637v3(3.5GHz/4c)/9.6GT/15ML3SPT0CPU00007Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2640v3(8C,90W,2.6GHz)Processor Option Kit BCX326E5-2640v3(2.6GHz/8c)/8GT/20ML3SPT0CPU00008Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2643v3(6C,135W,3.4GHz)Processor Option Kit BCX339E5-2643v3(3.4GHz/6c)/9.6GT/20ML3SPT0CPU00009Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2650v3(10C,105W,2.3GHz)Processor Option Kit BCX327E5-2650v3(2.3GHz/10c)9.6GT/25ML3SPT0CPU00010Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2660v3(10C,105W,2.6GHz)Processor Option Kit BCX328E5-2660v3(2.6GHz/10c)9.6GT/25ML3 SPT0CPU00011Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2667v3(8C,135W,3.2GHz)Processor Option Kit E5-2667v3(3.2GHz/8c)9.6GT/20ML3SPT0CPU00012Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2670v3(12C,120W,2.3GHz)Processor Option Kit BCX329E5-2670v3(2.3GHz/12c)9.6GT/30ML3 SPT0CPU00013Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2680v3(12C,120W,2.5GHz)Processor Option Kit BCX330E5-2680v3(2.5GHz/12c)9.6GT/30ML3 SPT0CPU00015Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2690v3(12C,135W,2.6GHz)Processor Option Kit BCX331E5-2690v3(2.6GHz/12c)9.6GT/30ML3 SPT0CPU00016Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2695v3(14C,120W,2.3GHz)Processor Option Kit BCX333E5-2695v3(2.3GHz/14c)9.6GT/35ML3 SPT0CPU00017Inspur NF5280M4Inbbb Xeon E5-2697v3(14C,145W,2.6GHz)Processor Option Kit BCX334E5-2697v3(2.6GHz/14c)9.6GT/35ML3SPT0CPU00018Inspur NF5280M4Inbbb Xeon E5-2698v3(16C,135W,2.3GHz)Processor Option Kit BCX335E5-2698v3(2.3GHz/16c)9.6GT/40MLSPT0CPU00019Inspur NF5280M4Inbbb Xeon E5-2699v3(18C,145W,2.3GHz)Processor Option Kit E5-2699v3(2.3GHz/18c)9.6GT/45ML3SPT0CPU00014Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2683v3(14C,120W,2.0GHz)Processor Option Kit E5-2683v3(2.0GHz/14C)/9.6GT/35ML3 BCX438XeonE3-1220V5(3.0GHZ)/8M/4CBCX439XeonE3-1230V5(3.40GHZ)/8M/4CBCX440XeonE3-1240V5(3.50GHZ)/8M/4CBCX441XeonE3-1240LV5(2.10GHZ)/8M/4CBCX442XeonE3-1260LV5(2.90GHZ)/8M/4CBCX443XeonE3-1270V5(3.60GHZ)/8M/4CBCX444XeonE3-1280V5(3.70GHZ)/8M/4CBCX445i3-6320(3.9GHz)/4M/2CBCX446i3-6300T(3.3GHz)/4M/2CBCX447i3-6300(3.8GHz)/4M/2CBCX448i3-6100T(3.2GHz)/3M/2CBCX449i3-6100(3.7GHz)/3M/2CBCX450G4520(3.0GHz)/3M/2CBCX451G4500T(3.0GHz)/3M/2CBCX452G4500(3.5GHz)/3M/2CBCX453G4400(3.3GHz)/3M/2CBCX322E5-2603v3(1.6GHz/6c)/6.4GT/15ML3BCX401E5-2603v4(1.7GHz/6c)/6.4GT/15ML3BCX402E5-2609v4(1.7GHz/8c)/6.4GT/20ML3BCX403E5-2620v4(2.1GHz/8c)/8GT/20ML3BCX406E5-2630v4(2.2GHz/10c)/8GT/25ML3BCX408E5-2640v4(2.4GHz/10c)/8GT/25ML3BCX412E5-2650v4(2.2GHz/12c)9.6GT/30ML3BCX414E5-2660v4(2.0GHz/14c)9.6GT/35ML3 BCX416E5-2680v4(2.4GHz/14c)9.6GT/35ML3 BCX419E5-2690v4(2.6GHz/14c)9.6GT/35ML3 BCX404E5-2623v4(2.6GHz/4c)8.0GT/10ML3 BCX407E5-2637v4(3.5GHz/4c)/9.6GT/15ML3 BCX409E5-2643v4(3.4GHz/6c)/9.6GT/20ML3 BCX415E5-2667v4(3.2GHz/8c)9.6GT/25ML3 BCX417E5-2683v4(2.1GHz/16c)/9.6GT/40ML3 BCX420E5-2695v4(2.1GHz/18c)9.6GT/45ML3 BCX422E5-2697v4(2.3GHz/18c)9.6GT/45ML3 BCX421E5-2697Av4(2.6GHz/16c)9.6GT/40ML3 BCX423E5-2698v4(2.2GHz/20c)9.6GT/50ML BCX424E5-2699v4(2.2GHz/22c)9.6GT/55ML3 BCX405E5-2630LV4(1.8GHz/10c)8.0GT/25ML3 BCX411E5-2650LV4(1.7GHz/14c)9.6GT/35ML3 BCX410E5-2648LV4(1.8GHz/14c)9.6GT/35ML3 BCX413E5-2658V4(2.3GHz/14c)9.6GT/35ML3 BCX418E5-2687WV4(3.0GHz/12c)9.6GT/35ML3 BCX425XeonE7-4809v4(2.1GHz/8C)/6.4GT/20ML3 BCX426XeonE7-4820v4(2.0GHz/10C)/6.4GT/25ML3 BCX427XeonE7-4830v4(2.0GHz/14C)/8.0GT/35ML3 BCX428XeonE7-4850v4(2.1GHz/16C)/8.0GT/40ML3 BCX429XeonE7-8860v4(2.2GHz/18C)/9.6GT/45ML3 BCX430XeonE7-8855v4(2.1GHz/14C)/8.0GT/35ML3 BCX431XeonE7-8867v4(2.4GHz/18C)/9.6GT/45ML3 BCX432XeonE7-8870v4(2.1GHz/20C)/9.6GT/50ML3 BCX433XeonE7-8880v4(2.2GHz/22C)/9.6GT/55ML3 BCX434XeonE7-8890v4(2.2GHz/24C)/9.6GT/60ML3 BCX435XeonE7-8891v4(2.8GHz/10C)/9.6GT/60ML3 BCX436XeonE7-8893v4(3.2GHz/4C)/9.6GT/60ML3 DDR3内存SPT0MEM00006Inspur32GB DDR3L-1600LRDIMM SPT0MEM00007Inspur16GB DDR3-1866RDIMMSPT0MEM00008Inspur16GB DDR3-1600RDIMMSPT0MEM00009Inspur16GB DDR3L-1600RDIMMSPT0MEM0000A Inspur8GB DDR3-1600RDIMMSPT0MEM0000B Inspur8GB DDR3L-1600RDIMMSPT0MEM0000C Inspur4GB DDR3-1600RDIMMSPT0MEM0000D Inspur4GB DDR3L-1600RDIMMDDR4内存DDR4内存BMD1558G_DDR4_UDIMM-EUBMD15616G_DDR4_UDIMM-EUSPT0MEM00002Inspur8GB DDR4-2133MHz(1Rx4)RDIMM BMD1418G RDIMM DDR4内存SPT0MEM00001Inspur16GB DDR4-2133MHz(2Rx4)RDIMM BMD14216G RDIMM DDR4内存SPT0MEM00003Inspur16GB DDR4-2133MHz(1Rx4)RDIMMSPT0MEM00004Inspur32GB DDR4-2133MHz(2Rx4)RDIMM BMD14332G LRDIMM DDR4内存SPT0MEM00005Inspur32GB DDR4-2133MHz(4Rx4)LRDIMM3.5寸企业级SATA（含托架及包装）3.5寸企业级SATA（含托架及包装）SPT0STG35007Inspur3.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0231TB SATA（企业级）SPT0STG35001Inspur3.5"2TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0422TB SATA（企业级）SPT0STG35006Inspur3.5"3TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0703TB SATA（企业级）SPT0STG35005Inspur3.5"4TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0834TB SATA（企业级）SPT0STG35003Inspur3.5"6TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT1076TB SATA（企业级）SPT0STG35002Inspur3.5"8TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive8TB SATA（企业级）2.5寸企业级SATA（含托架及包装）2.5寸企业级SATA（含托架及包装）SPT0STG25006Inspur2.5"500GB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT062500GB SATA 2.5"（企业级）SPT0STG25005Inspur2.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0611TB SATA 2.5"（企业级）SPT0STG25004Inspur2.5''2TB7.2K Enterprise SATA6Gbps Hot Swap HardDrive2TB SATA 2.5"（企业级）2.5寸SAS（含托架及包装）2.5寸SAS（含托架及包装）7,200RPM7,204RPMSPT0STG25S03Inspur2.5"1TB7.2K Enterprise SAS12Gbps Hot Swap Hard Drive BSA0531TB SAS硬盘2.5"SPT0STG25S05Inspur2.5"1TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0531TB SAS硬盘2.5"SPT0STG25S01Inspur2.5"2TB7.2K Enterprise SAS12Gbps Hot Swap Hard Drive2TB SAS硬盘2.5"10,000RPM10,004RPMSPT0STG25001Inspur2.5"1.2TB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA0841.2T热插拔SAS硬盘(1万转)2.5" SPT0STG25002Inspur2.5"1.2TB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S02Inspur2.5"1.8TB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA1091.8T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0E Inspur2.5"300GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA023300G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0G Inspur2.5"300GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA023300G热插拔SAS硬盘(1万转)2.5"SPT0STG25S08Inspur2.5"600GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S09Inspur2.5"600GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S04Inspur2.5"900GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA057900G热插拔SAS硬盘(1万转)2.5"SPT0STG25S06Inspur2.5"900GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA057900G热插拔SAS硬盘(1万转)2.5"15,000RPM15,004RPMSPT0STG25S0D Inspur2.5"300GB15K Enterprise SAS12Gbps Hot Swap Hard Drive BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S0F Inspur2.5"300GB15K Enterprise SAS6Gbps Hot Swap Hard Drive BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S07Inspur2.5"600GB15K Enterprise SAS12Gbps Hot Swap Hard Drive BSA108600G热插拔SAS硬盘(1万5千转)2.5"日立SPT0STG25003Inspur2.5"600GB15K Enterprise SAS6Gbps Hot Swap Hard Drive600G热插拔SAS硬盘(1万5千转)2.5"日立3.5寸SAS（含托架及包装）3.5寸SAS（含托架及包装）SPT0STG35S09Inspur3.5"1TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive TYP0231TB SAS硬盘SPT0STG35S08Inspur3.5"2TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0762TB SAS硬盘SPT0STG35S05Inspur3.5"2TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive BSA0762TB SAS硬盘SPT0STG35S07Inspur3.5"3TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive TCP0493TB SAS硬盘SPT0STG35S04Inspur3.5"3TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive TCP0493TB SAS硬盘SPT0STG35S06Inspur3.5"4TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA1064TB SAS硬盘SPT0STG35S03Inspur3.5"4TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive BSA1064TB SAS硬盘SPT0STG35S01Inspur3.5"6TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive6TB SAS硬盘3.5寸硬盘托架，2.5寸SAS硬盘7,200RPM7,204RPMSPT0STG25S0N Inspur2.5"1TB7.2K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA0531TB SAS硬盘2.5"SPT0STG25S0P Inspur2.5"1TB7.2K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA0531TB SAS硬盘2.5"SPT0STG25S0H Inspur2.5"2TB7.2K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray2TB SAS硬盘2.5"10,000RPM10,004RPMSPT0STG25S0K Inspur2.5"1.2TB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0M Inspur2.5"1.2TB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0J Inspur2.5"1.8TB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA1091.8T热插拔SAS硬盘(1万转)2.5"SPT0STG25S11Inspur2.5"300GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA023300G热插拔SAS硬盘(1万转)2.5" SPT0STG25S13Inspur2.5"300GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA023300G热插拔SAS硬盘(1万转)2.5" SPT0STG25S0T Inspur2.5"600GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0V Inspur2.5"600GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0Q Inspur2.5"900GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA057900G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0R Inspur2.5"900GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA057900G热插拔SAS硬盘(1万转)2.5"15,000RPM15,004RPMSPT0STG25S0Z Inspur2.5"300GB15K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S12Inspur2.5"300GB15K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S0S Inspur2.5"600GB15K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA108600G热插拔SAS硬盘(1万5千转)2.5"日立SPT0STG25S0U Inspur2.5"600GB15K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray600G热插拔SAS硬盘(1万5千转)2.5"日立3.5寸云盘和归档盘（含托架及包装）3.5寸云盘和归档盘（含托架及包装）SPT0STG3500A Inspur3.5"4TB7.2K Cloud Storage SATA6Gbps Hot Swap Hard Drive4T云盘（7200转）V03ZVSPT0STG3500E Inspur3.5"4TB5.9K Cloud Storage SATA6Gbps Hot Swap Hard Drive4T云盘（5900转）_W0CCP0B0000060053.5寸硬盘托架，2.5寸企业级SATA3.5寸硬盘托架，2.5寸企业级SATASPT0STG25008Inspur2.5"2TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray2TB SATA 2.5"（企业级）SPT0STG25009Inspur2.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray1TB SATA 2.5"（企业级）SPT0STG2500A Inspur2.5"500GB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray500GB SATA 2.5"（企业级）PCIE SSD卡PCIE SSD卡BHD025400G MLC SSD PCIe接口BHD026600G MLC SSD PCIe接口BHD024800G MLC SSD PCIe接口BHD0231.2T MLC SSD PCIe接口BHD0272.4T MLC SSD PCIe接口其他硬盘及组件其他硬盘及组件BHE00264G SATA-DOM硬盘BHD02880G MLC SSD 2.5BHD029120G MLC SSD 2.5BHD004160G MLC SSD 2.5BHD030240G MLC SSD 2.5BHD010300G MLC SSD 2.5BHD016480G MLC SSD 2.5BHD009600G MLC SSD 2.5BHD019800G MLC SSD 2.5TYP004500GB SATA（桌面级）BPT0201T SATA（桌面级）BSA012300G热插拔SAS硬盘(1万5千转)RAID卡RAID卡SPT0POC00R06Inspur SAS3008iMR12Gbps PCIe Adapter BSS012INSPUR八通道高性能SAS3008卡IMR（可选Raid key)SPT0THR00K02Inspur RAID5Upgrate key for SAS3008iMR12Gbps PCIe Adapter BSS013INSPUR八通道高性能3008Raid KeySPT0POC00R02Inspur RAID1GB9271-8i6Gbps PCIe Adapter by Avago BRE028八通道SAS高性能RAID-9271（1G缓存)SPT0THR00D02Inspur iBBU09Battery Backup Unit Upgrade for RAID2208MR,9271-8i PCIe Adapter BDC020八通道SAS高性能RAID-9271电池SPT0THR00D05Inspur Supercapacitor Upgrade for RAID2208MR,9271-8i PCIe Adapter BDC022八通道SAS高性能RAID-9271缓存断电保护模块SPT0THR00K03Inspur RAID CacheCade Pro2.0Key for2208MR,3108MR,9271-8i,9361-8i BRE032RAID卡功能模块-CacheCade模块SPT0POC00R0G Inspur RAID2GB PM806012Gbps PCIe Adapter BDC027INSPUR八通道高性能SAS RAID卡RS0820P(2G缓存)SPT0THR00D01Inspur Supercapacitor for RAID PM8060(1GB,2GB)PCIe Adapter by Adaptec BRE038INSPUR八通道高性能SAS RS0810P缓存断电保护模块SPT0POC00R09Inspur RAID1GB9361-8i12Gbps PCIe Adapter by Avago BRE034八通道SAS高性能RAID-9361（1G缓存)SPT0THR00D03Inspur Supercapacitor Upgrade for RAID1GB9361-8i PCIe Adapter by LSI BDC026八通道SAS高性能RAID-9361（1G缓存)缓存断电保护模块SPT0POC00R08Inspur RAID2GB9361-8i12Gbps PCIe Adapter by Avago BRD036八通道SAS高性能RAID-9361（2G缓存)SPT0THR00D04Inspur Supercapacitor Upgrade for RAID9361-8i(2GB),3108MR(2GB,4GB)by LSI BDC025八通道SAS高性能RAID-9361（2G缓存)缓存断电保护模块SPT0POC00R07Inspur RAID4GB9364-8i12Gbps PCIe Adapter by Avago BRD037八通道SAS高性能LSI RAID-9364（4G缓存+缓存断电保护模块）SPT0POC00R0A Inspur RAID4GB3108MR12Gbps PCIe Adapter BRE040INSPUR八通道高性能SAS RAID卡RS0840L3(4G缓存)电源电源SPT0PSU00001Inspur CRPS800W Platinum Hot Swap Power SupplySPT0PSU00002Inspur CRPS1200W Platinum Hot Swap Power SupplySPT0PSU00003Inspur CRPS550W Platinum Hot Swap Power SupplySPT0PSU00004Inspur CRPS800W Titanium Hot Swap Power SupplySPT0PSU00005Inspur CRPS800W-48VDC Hot Swap Power SupplySPT0PSU00006Inspur CRPS800W336VDC Hot Swap Power SupplyBDY096300W电源适用于NP3020M4BDY097550W白金电源适用于NP3020M4光纤通道连接配件光纤通道连接配件SPT0POC00B01Inspur LPe1250Single Port8Gb Fibre Channel HBA by Emulex TAF019光纤通道HBA卡,FC8Gb,单端口,LC接口SPT0POC00B02Inspur LPe12002Dual Port8Gb Fibre Channel HBA by Emulex TAF021光纤通道HBA卡,FC8Gb,双端口,LC接口SPT0POC00B05Inspur QLE2560Single Port8Gb Fibre Channel HBA by Qlogic TAF019光纤通道HBA卡,FC8Gb,单端口,LC接口SPT0POC00B06Inspur QLE2562Dual Port8Gb Fibre Channel HBA by Qlogic TAF021光纤通道HBA卡,FC8Gb,双端口,LC接口SPT0POC00B03Inspur LPe16000B Single Port16Gb Fibre Channel HBA by Emulex TAF028光纤通道HBA卡,FC16Gb,单端口,LC接口SPT0POC00B07Inspur QLE2670Single Port16Gb Fibre Channel HBA by Qlogic TAF028光纤通道HBA卡,FC16Gb,单端口,LC接口SPT0POC00B04Inspur LPe16002B Dual Port16Gb Fibre Channel Adapter by Emulex TAF029光纤通道HBA卡,FC16Gb,双端口,LC接口转接卡转接卡BKZ013PCI-E转接卡套件（NF8460M3）PCI-E转接卡套件（NF8460M4）网卡及远程管理卡网卡及远程管理卡SPT0POC00W01Inspur I350PCIe1Gb2Port Base-T Ethernet Adapter BNT004双口千兆网卡（RJ45接口）SPT0POC00W02Inspur I350PCIe1Gb4Port Base-T Ethernet Adapter BNT010四口千兆网卡（RJ45接口）SPT0POC00W06Inspur I350PCIe1Gb4Port SPF Ethernet Adapter BNT042四口千兆网卡（光纤接口）SPT0POC00W07Inspur82599ES PCIe10Gb1Port with Multi-mode SFP+module Ethernet Adapter单口万兆网卡（光纤接口含多模模块）SPT0POC00W09Inspur MCX312B-XCCT PCIe10Gb2Port SFP+Ethernet Adapter BNT009双口万兆网卡（光纤接口）SPT0POC00W08Inspur82599ES PCIe10Gb2Port with Multi-mode SFP+module Ethernet Adapter双口万兆网卡（光纤接口含多模模块）SPT0POC00W0J Inspur X710PCIe x8+x110Gb2Port SFP+Ethernet Daughter Card出厂前升级INSPUR双口万兆FLOM网卡（光纤接口），不含光模块SPT0POC00W0H Inspur82599ES PCIe x8+x110Gb1Port SFP+Ethernet Adapter BNT034INSPUR单口万兆网卡（光纤接口），不含光模块SPT0POC00W0K Inspur CX3PCIe x8+110Gb1Port SFP+Ethernet Adapter BNT034INSPUR单口万兆网卡（光纤接口），不含光模块SPT0POC00W0G Inspur82599ES PCIe x8+x110Gb2Port SFP+Ethernet Adapter BNT035INSPUR双口万兆网卡（光纤接口），不含光模块SPT0POC00W0L Inspur CX3PCIe x8+110Gb2Port SFP+Ethernet AdapterSPT0THR00S01Inspur1Gb Single-Mode SPF+Optical Module INSPUR千兆网卡光模块（单模，搭配INSPUR万兆网卡使用）SPT0THR00S02Inspur1Gb Multi-Mode SFP+Optical Module INSPUR千兆网卡光模块（多模，搭配INSPUR万兆网卡使用）SPT0THR00S03Inspur10Gb Single-Mode SFP+Optical Module BNT036INSPUR万兆网卡光模块（单模，搭配INSPUR万兆网卡使用）SPT0THR00S04Inspur10Gb Multi-Mode SFP+Optical Module BNT037INSPUR万兆网卡光模块（多模，搭配INSPUR万兆网卡使用）SPT0POC00W0A Inspur T580-SO-CR PCIe40Gb2Port QSFP+Ethernet Adapter BNT039双口40GbE网卡光纤接口，不含光模块，需搭配40G网卡线缆使用SPT0POC00W03Inspur X540PCIe10Gb2Port Base-T Ethernet Adapter BNT030双口万兆网卡（RJ45接口）SPT0POC00W04Inspur I350PCIe x8+11Gb4Port Base-T Ethernet Adapter出厂前升级INSPUR四口千兆网卡（RJ45接口）SPT0POC00W05Inspur X540PCIe x8+110Gb2Port Base-T Ethernet Adapter INSPUR双口万兆网卡（RJ45接口）BNT002单口千兆网卡（光纤接口）BNT005双口千兆网卡（光纤接口）BNT008单口万兆网卡（光纤接口）BNT040双口40GbE CNA网卡光纤接口，不含光模块，需搭配40G网卡线缆使用BNT04140G网卡线缆，15米Infiniband card Infiniband cardSPT0POC00C01Inspur MCX353A-FCBT56Gb1Port with QSFP Module InfiniBand Adapter TAF027HCA卡(单口IB卡56GB)SPT0POC00C02Inspur MCX353A-FCBT56Gb2Port with QSFP Module InfiniBand Adapter HCA卡(双口IB卡56GB)软驱、光驱、刻录机软驱、光驱、刻录机BHU001U盘软驱MGQ002标准DVDBCD006DVD刻录机BCD017USB DVD刻录机BCD026SLIM DVD刻录机显卡显卡BXK039显卡K420（显存1G）BXK040显卡K620（显存2G）BXK041显卡K2200（显存4G）显示器显示器BOV01419.5寸液晶显示器BOV00921.5寸液晶显示器BOV01523.6寸液晶显示器RACK机柜及组件RACK机柜及组件BOG022浪潮42U标准服务器机柜（无PDU）/2000mm×1100mm×600mm（H×D×W）BPK0396口PDU国标万用插口/10ABPK03821口PDU国标万用插口/32ABTP00140公斤机柜托盘BTP002100公斤机柜托盘BOK001键盘B0M001鼠标BOQ008四合一切换器17寸液晶8口/USBBOQ009四合一切换器17寸液晶16口/USBBOQ0018口切换器BOQ00516口切换器其他其他BPT002配件，背板_INSPUR_SAS_2.5X8BPT017硬盘模组_2.5×8BPT003配件，背板_INSPUR_SAS12G_4X3.5BPT004配件，背板_INSPUR_SAS12G_8X2.5BPT008配件，SAS线BPT010配件，风扇BPT011配件，硬盘托架_2.5寸BPT012配件，硬盘托架_3.5寸BPT013配件，包装箱BPT014配件，电源线BPT015配件，服务器用户手册及睿捷服务器套件光盘BPL001NF5270M42U前面板V08WY0208000B014SPT0BKD00001Inspur Milestone42U3.5"x4Drive Backplane Kit SPT0BKD00002Inspur Milestone42U Rear2.5"x2Drive Backplane Kit SPT0BKD00003Inspur Milestone42U2.5"x8Drive Backplane Kit。

Eaton 198580Eaton Moeller® series Rapid Link - Speed controller, 8.5 A, 4 kW, Sensor input 4, 400/480 V AC, AS-Interface®, S-7.4 for 31 modules, HAN Q5, with fanGeneral specificationsEaton Moeller® series Rapid Link Speed controller198580195 mm270 mm 220 mm 3.6 kgUL approval CEIEC/EN 61800-5-1 RoHS UL 61800-5-1RASP5-8404A31-5120001S1Product NameCatalog NumberProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes Model Code3 fixed speeds and 1 potentiometer speedcan be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junctionInternal, temperature-controlled FanDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnect mobile (App) Parameterization: FieldbusParameterization: drivesConnectParameterization: KeypadFanKey switch position HANDTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationThermo-click with safe isolationControl unitPC connectionKey switch position OFF/RESETInternal DC linkIGBT inverterKey switch position AUTOSelector switch (Positions: REV - OFF - FWD)PTC thermistor monitoring3 fixed speeds1 potentiometer speedFor actuation of motors with mechanical brake IP65NEMA 121st and 2nd environments (according to EN 61800-3)IIISpeed controllerASIAS-Interface profile cable: S-7.4 for 31 modulesC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.C1: for conducted emissions only2000 VPhase-earthed AC supply systems are not permitted. Center-point earthed star network (TN-S network)AC voltageVertical15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftResistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Resistance: 10 - 150 Hz, Oscillation frequencyResistance: 57 Hz, Amplitude transition frequency on acceleration Max. 2000 mAbove 1000 m with 1 % performance reduction per 100 m -10 °C40 °C-40 °C70 °CFeatures Fitted with: Functions Degree of protectionElectromagnetic compatibility Overvoltage categoryProduct categoryProtocolRadio interference classRated impulse withstand voltage (Uimp) System configuration typeMounting position Shock resistance Vibration AltitudeAmbient operating temperature - min Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max< 95 %, no condensation In accordance with IEC/EN 50178Adjustable, motor, main circuit 0.8 - 8.5 A, motor, main circuit < 10 ms, Off-delay < 10 ms, On-delay 98 % (η)7.8 A3.5 mA120 %Maximum of one time every 60 seconds 380 V480 V380 - 480 V (-10 %/+10 %, at 50/60 Hz)Synchronous reluctance motors U/f control BLDC motorsSensorless vector control (SLV) PM and LSPM motors 0 Hz500 HzFor 60 s every 600 s At 40 °C12.7 AClimatic proofingCurrent limitationDelay timeEfficiency Input current ILN at 150% overload Leakage current at ground IPE - max Mains current distortion Mains switch-on frequencyMains voltage - min Mains voltage - max Mains voltage toleranceOperating modeOutput frequency - min Output frequency - max Overload current Overload current IL at 150% overload45 Hz66 Hz4 kW480 V AC, 3-phase400 V AC, 3-phase0.1 Hz (Frequency resolution, setpoint value)200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section50/60 Hz8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitPhase-earthed AC supply systems are not permitted.Center-point earthed star network (TN-S network)AC voltage 5 HP≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeAdjustable to 100 % (I/Ie), DC - Main circuit≤ 30 % (I/Ie)400/480 V AC -15 % / +10 %, Actuator for external motor brake10 kAType 1 coordination via the power bus' feeder unit, Main circuit400/480 V AC (external brake 50/60 Hz)24 V DC (-15 %/+20 %, external via AS-Interface® plug)AS-InterfacePlug type: HAN Q5Number of slave addresses: 31 (AS-Interface®) Specification: S-7.4 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mA C1 ≤ 1 m, maximum motor cable length C2 ≤ 5 m, maximum motor cable length C3 ≤ 25 m, maximum motor cable lengthMeets the product standard's requirements.Rated frequency - minRated frequency - maxRated operational power at 380/400 V, 50 Hz, 3-phase Rated operational voltageResolutionStarting current - maxSupply frequencySwitching frequencySystem configuration type Assigned motor power at 460/480 V, 60 Hz, 3-phase Braking currentBraking torqueBraking voltageRated conditional short-circuit current (Iq)Short-circuit protection (external output circuits) Rated control voltage (Uc)Communication interfaceConnectionInterfacesCable length10.2.2 Corrosion resistanceMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Generation Change RASP4 to RASP5Generation change from RA-SP to RASP 4.0Generation change RAMO4 to RAMO5Configuration to Rockwell PLC for Rapid LinkGeneration change from RA-MO to RAMO 4.0Generation Change RA-SP to RASP5Rapid Link 5 - brochureDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - InstallationshilfeDA-SW-drivesConnect - installation helpDA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnectMaterial handling applications - airports, warehouses and intra-logistics ETN.RASP5-8404A31-5120001S1.edzIL034085ZUrasp5_v21.dwgDA-CD-ramo5_v21DA-CS-ramo5_v21rasp5_v21.stpDA-DC-00003964.pdfDA-DC-00004514.pdfDA-DC-00004184.pdfDA-DC-00004508.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions.epseaton-bus-adapter-rapidlink-speed-controller-dimensions-004.eps10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD modelSertifiseringsrapporterTegningerEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmediaThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function。

XB8886A ______________________________________ ________________________________________________________________________________ One Cell Lithium-ion/Polymer Battery Protection ICGENERAL DESCRIPTIONThe XB8886A Series product is a high integration solution for lithium-ion/polymer battery protection.XB8886A contains advanced power MOSFET, high-accuracy voltage detection circuits and delay circuits.XB8886A is put into an SOP8-PP package and only one external component makes it an ideal solution in limited space of battery pack.XB8886A has all the protection functions required in the battery application including overcharging, overdischarging, overcurrent and load short circuiting protection etc. The accurate overcharging detection voltage ensures safe and full utilization charging. The low standby current drains little current from the cell while in storage.The device is not only targeted for digital cellular phones, but also for any otherLi-Ion and Li-Poly battery-powered information appliances requiring long-term battery life.FEATURES·Protection of Charger Reverse Connection·Protection of Battery Cell Reverse Connection·Integrate Advanced Power MOSFET with Equivalent of 8.5mΩ R SS(ON)·SOP8-PP Package·Only One External Capacitor Required·Over-temperature Protection ·Overcharge Current Protection ·Two-step Overcurrent Detection: -Overdischarge Current-Load Short Circuiting·Charger Detection Function·0V Battery Charging Function- Delay Times are generated inside ·High-accuracy Voltage Detection ·Low Current Consumption- Operation Mode:7.8μA typ.- Power-down Mode: 4.5μA typ. ·RoHS Compliant and Lead (Pb) FreeAPPLICATIONSOne-Cell Lithium-ion Battery PackLithium-Polymer Battery PackPower BankFigure 1. Typical Application CircuitORDERING INFORMATIONNote: “YW ” is manufacture date code, “Y ” means the year, “W ” means the weekPIN CONFIGURATIONFigure 2. PIN ConfigurationPIN DESCRIPTIONABSOLUTE MAXIMUM RATINGS(Note: Do not exceed these limits to prevent damage to the device. Exposure to absolute maximum rating conditions for long periods may affect device reliability.)ELECTRICAL CHARACTERISTICSTypicals and limits appearing in normal type apply for T A= 25o C, unless otherwise specifiedThe parameter is guaranteed by design.Figure 3. Functional Block DiagramFUNCTIONAL DESCRIPTIONThe XB8886A monitors the voltage andcurrent of a battery and protects it frombeing damaged due to overcharge voltage,overdischarge voltage, overdischargecurrent, and short circuit conditions bydisconnecting the battery from the loador charger. These functions are required inorder to operate the battery cell withinspecified limits.The device requires only one externalcapacitor. The MOSFET is integrated andits R SS(ON) is as low as8.5mΩtypical.Normal operating modeIf no exception condition is detected, charging and discharging can be carried out freely. This condition is called the normal operating mode.Overcharge ConditionWhen the battery voltage becomes higher than the overcharge detection voltage (V CU) during charging under normal conditionand the state continues for the overcharge detection delay time (t CU) or longer, theXB8886A turns the charging control FEToff to stop charging. This condition is called the overcharge condition. The overcharge condition is released in the following two cases:1, When the battery voltage drops below the overcharge release voltage (V CL), the XB8886A turns the charging control FETon and returns to the normal condition.2, When a load is connected and discharging starts, the XB8886A turns the charging control FET on and returns to the normal condition. The release mechanism is as follows: the discharging current flows through an internal parasitic diode of the charging FET immediately after a load is connected and discharging starts, and the VM pin voltage increases about 0.7 V (forward voltage of the diode) from the GND pin voltage momentarily. TheXB8886A detects this voltage and releases the overcharge condition. Consequently, in the case that the battery voltage is equal to or lower than the overcharge detection voltage (V CU), the XB8886A returns to the normal condition immediately, but in the case the battery voltage is higher than the overcharge detection voltage (V CU),the chip does not return to the normal conditionuntil the battery voltage drops below the overcharge detection voltage (V CU) even if the load is connected. In addition, if the VM pin voltage is equal to or lower than the overcurrent detection voltage when a load is connected and discharging starts, the chip does not return to the normal condition.Remark If the battery is charged to a voltage higher than the overcharge detection voltage (V CU) andthe battery voltage does not drops below the overcharge detection voltage (V CU) even when a heavy load, which causes an overcurrent, is connected, the overcurrent do not work until the battery voltage drops below the overcharge detection voltage (V CU). Since an actual battery has, however, an internal impedance of several dozens of mΩ, and the battery voltage drops immediately after a heavy load which causes an overcurrent is connected, the overcurrent work. Detection of load short-circuiting works regardless of the battery voltage.Overdischarge ConditionWhen the battery voltage drops below the overdischarge detection voltage (V DL) during discharging under normal condition and it continues for the overdischarge detection delay time (t DL) or longer, theXB8886A turns the discharging control FET off and stops discharging. This condition is called overdischarge condition. After the discharging control FET is turned off, the VM pin is pulled up by the R VMD resistorbetween VM and VDD in XB8886A. Meanwhile when VM is bigger than 1.5V (typ.) (the load short-circuiting detection voltage), the current of the chip is reduced to the power-down current (I PDN). This condition is called power-down condition. The VM and VDD pins are shorted by theR VMD resistor in the IC under the overdischarge and power-down conditions. The power-down condition is released when a charger is connected and the potential difference between VM and VDD becomes 1.3 V (typ.) or higher (load short-circuiting detection voltage). At this time, the FET is still off. When the battery voltage becomes the overdischarge detection voltage (V DL) or higher (see note),the XB8886A turns the FET on and changes to the normal condition from the overdischarge condition.Remark If the VM pin voltage is no less than the charger detection voltage (V CHA), when the battery under overdischarge condition is connected to a charger, the overdischarge condition is released (the discharging control FET is turned on) as usual, provided that the battery voltage reaches the overdischarge release voltage (V DU) or higher. Overcurrent ConditionWhen the discharging current becomes equal to or higher than a specified value (the VM pin voltage is equal to or higher than the overcurrent detection voltage) during discharging under normal condition and the state continues for the overcurrent detection delay time or longer, theXB8886A turns off the discharging control FET to stop discharging. This condition is called overcurrent condition. (The overcurrentincludes overcurrent, or load short-circuiting.)The VM and GND pins are shorted internally by the R VMS resistor under the overcurrent condition. When a load is connected, the VM pin voltage equals the VDD voltage due to the load.The overcurrent condition returns to the normal condition when the load is released and the impedance between the B+ and B- pins becomes higher than the automatic recoverable impedance. When the load is removed, the VM pin goes back to the GND potential since the VM pin is shorted the GND pin with the R VMS resistor. Detecting that the VM pin potential is lower than the overcurrent detection voltage(V IOV1), the IC returns to the normal condition.Abnormal Charge Current DetectionIf the VM pin voltage drops below the charger detection voltage (V CHA) during charging under the normal condition and it continues for the overcharge detection delay time (t CU) or longer, the XB8886A turns the charging control FET off and stops charging. This action is called abnormal charge current detection. Abnormal charge current detection works when the discharging control FET is on and the VM pin voltage drops below the charger detection voltage (V CHA). When an abnormal charge current flows into a battery in the overdischarge condition, the XB8886A consequently turns the charging control FET off and stops charging after the battery voltage becomes the overdischarge detection voltage and the overcharge detection delay time (t CU) elapses.Abnormal charge current detection is released when the voltage difference between VM pin and GND pin becomes lower than the charger detection voltage (V CHA) by separating the charger. Since the 0 V battery charging function has higher priority than the abnormal charge current detection function, abnormal charge current may not be detected by the product with the 0 V battery charging function while the battery voltage is low.Load Short-circuiting conditionIf voltage of VM pin is equal or below short circuiting protection voltage (V SHORT), the XB8886A will stop discharging and battery is disconnected from load. The maximum delay time to switch current off is t SHORT. This status is released when voltage of VM pin is higher than short protection voltage (V SHORT), such as when disconnecting the load.Delay CircuitsThe detection delay time for overdischarge current 2 and load short-circuiting startswhen overdischarge current 1 is detected.As soon as overdischarge current 2 or load short-circuiting is detected over detection delay time for overdischarge current 2 or load short- circuiting, the XB8886A stops discharging. When battery voltage falls below overdischarge detection voltage due to overdischarge current, the XB8886A stop discharging by overdischarge current detection. In this case the recovery of battery voltage is so slow that if battery voltage after overdischarge voltage detection delay time is still lower than overdischarge detection voltage, the XB8886A shifts to power-down.Figure 4. Overcurrent delay time0V Battery Charging Function (1) (2) (3)This function enables the charging of a connected battery whose voltage is 0 V by self-discharge. When a charger having 0 V battery start charging charger voltage(V0CHA) or higher is connected between B+ and B- pins, the charging control FET gate is fixed to VDD potential. When the voltage between the gate and the source of the charging control FET becomes equal to or higher than the turn-on voltage by the charger voltage, the charging control FET is turned on to start charging. At this time, the discharging control FET is off and the charging current flows through the internal parasitic diode in the discharging control FET. If the battery voltage becomes equal to or higher than the overdischarge release voltage (V DU), the normal condition returns. Note(1) Some battery providers do not recommend charging of completely discharged batteries. Please refer to battery providers before the selection of 0 V battery charging function.(2) The 0V battery charging function has higher priority than the abnormal charge current detection function. Consequently, a product with the 0 V battery charging function charges a battery and abnormal charge current cannot be detected during the battery voltage is low (at most 1.8 V or lower).(3) When a battery is connected to the IC for the first time, the IC may not enter the normal condition in which discharging is possible. In this case, set the VM pin voltage equal to the GND voltage (short the VM and GND pins or connect a charger) to enter the normal condition.TIMING CHART1．Overcharge and overdischarge detectionV V CU -V V DL +V V DL ONONCHARGEV DDV ov1V SS V VMFigure5-1 Overcharge and Overdischarge Voltage Detection2．Overdischarge current detectionV CU V CU -V HC V DL +V DH V DLONDISCHARGEOFFV DDV V ov2V ov1V SS(1)(4)(1)(1)(1)(4)(4)Figure5-2 Overdischarge Current DetectionRemark: (1) Normal condition (2) Overcharge voltage condition (3) Overdischarge voltage condition (4)Overcurrent conditionXB8886A ______________________________________ ____________________________________________________ ___________________________ 3．Charger DetectionVV CU-VV DL+VV DLONV DDVMV SSVFigure5-3 Charger Detection4．Abnormal Charger DetectionVV CU-VV DL+VV DLONONCHARGEV DDVMV SSVFigure5-4 Abnormal Charger DetectionRemark: (1) Normal condition (2) Overcharge voltage condition (3) Overdischarge voltage condition (4)Overcurrent condition)XB8886A ______________________________________ ____________________________________________________ ___________________________ TYPICAL APPLICATIONAs shown in Figure 6, the bold line is the high density current path which must be kept as short as possible. For thermal management, ensure that these trace widths are adequate. C1& R1 is a decoupling capacitor & resistor which should be placed as close as possible toXB8886A.Fig 6 XB8886A in a Typical Battery Protection CircuitPrecautions• Pay attention to the operating conditions for input/output voltage and load current so that the power loss in XB8886A does not exceed the power dissipation of the package.• Do not apply an electrostatic discharge to this XB8886A that exceeds the performance ratings of the built-in electrostatic protection circuit.XB8886A ______________________________________ ____________________________________________________ ___________________________ - 11 -REV0.3 PACKAGE OUTLINE SOP8-EPAD PACKAGE OUTLINE AND DIMENSIONSIn order to increase the driver current capability of XB8886A and improve the temperature of package, Please ensure Epad and enough ground PCB to release energy.。

菲尼克斯电气中国公司隶属于德国菲尼克斯电气集团。

1928年，菲尼克斯电气发明了世界上第一片组合式接线端子，这就是现代端子的雏形，也是菲尼克斯电气申请并获得的第一个发明专利。

此后，菲尼克斯电气激情创新，致力于各种连接技术的开发，形成了完善的电气接口技术体系，其中很多产品系列已经成为行业的应用标准。

菲尼克斯电气中国公司植根中国大地，努力开拓自己的业务。

如今中国公司的业务发展迅速，已经成为整个集团全球业务的重要基石。

2004年集团提出了新的战略，中国公司与德国、美国公司一起成为集团的核心竞争力中心，技术支持和管理范围拓展到亚洲太平洋地区。

MACX MCR-EX-SL-RPSSI-IMACX MCR-SL-CAC-5-IMACX MCR-SL-CAC-5-I-UPMCR-1CLP-I-I-00MCR-2CLP-I-I-00MCR-4CLP-I-I-00MCR-C-I-I-00-DCMCR-C-I-I-04-DCMCR-C-I-I-40-DCMCR-C-I-U-0-DCMCR-C-I-U-4-DCMCR-CLP-UI-I-4MCR-CPS-I-I-44-EMCR-CPSS-I-I-44-EMCR-C-UI/UI-DCIMCR-C-U-I-0-DCMCR-C-U-I-10B-0B-DCIMCR-C-U-I-4-DCMCR-C-UI-UI-DCI-NCMCR-C-U-U-DCMCR-FL-C-UI-2UI-DCIMCR-FL-C-UI-2UI-DCI-NCMCR-FL-C-UI-UI-DCI-24/230MCR-F-UI-DCMCR-PS- 24DC/24DC/200MCR-PS- 24DC/2X24DCMCR-PS- 24DC-10DC MCR-PT 100-IMCR-PT100/I/DCMCR-PT100-UMCR-R-I-4-V-DCMCR-S-1/5-UI-DCIMCR-S-10/50-UI-DCI MCR-S10-50-UI-DCI-NC MCR-S-1-5-UI-SW-DCI-NC MCR-SL-1CLP-I-I-00-4KV MCR-SL-D-U-IMCR-SL-PT100-I-DC-24 MCR-SL-PT100-SPMCR-SL-S-1-5-I-DCI-230 MCR-SL-S-1-5-I-DCI-24 MCR-SL-S-16-SP-24 MCR-SWS-IMCR-SWS-UMCR-TE-JK-I-EMCR-T-UI-EMCR-T-UI-E-NCMCR-T-UI-NCMCR-VAC-UI-O-DCMCR-VDC-UI-B-DCMCV 1,5/ 2-G-3,5MCV 1,5/ 5-G-3,5MCV 1,5/ 8-G-3,5MCV 1,5/12-G-3,5 MCV 1,5/14-G-3,5MCV 1,5/16-G-3,5MCV 1.5/2-G-3.81MCV 1.5/6-GF-3.81 MCV 1.5/8-GF-3.81 MCVR 1.5/11-ST-3.81 MDSTB 2,5/10-G1-5,08 MDSTB 2,5/12-G1-5,08 MDSTB 2,5/20-G1-5,08ME 6,2 TBUS-2 1,5/5-ST-3,81 GN MINI MCR-SL-1CP-I-IMINI MCR-SL-2CP-I-IMINI MCR-SL-I-IMINI MCR-SL-PT100-UI-SPMINI MCR-SL-PTBMINI MCR-SL-RPS-I-IMINI MCR-SL-RPS-I-I-SPMINI MCR-SL-R-UIMINI MCR-SL-UI-2IMINI MCR-SL-UI-2I-NCMINI MCR-SL-UI-UIMINI MCR-SL-U-U-SPMINI-PS-100-240AC/ 5DC/3MINI-PS-100-240AC/10-15DC/2 MINI-PS-100-240AC/10-15DC/8 MINI-PS-100-240AC/24DC/MINI-PS-100-240AC/24DC/2MINI-PS-100-240AC/24DC/4MINI-PS-100-240AC/2X15DC/1 MINI-SYS-PS-100-240AC/24DC/1.5 PLC-BSC- 24DC/1/ACTPLC-BSC- 24DC/1/SENPLC-BSC- 24DC/21PLC-BSC- 24DC/21/SO46PLC-BSC- 24DC/21-21PLC-BSC- 24DC/21HCPLC-BSC- 24UC/21PLC-BSC- 24UC/21-21PLC-BSC- 48DC/21PLC-BSC- 48DC/21-21PLC-BSC- 48DC/21HCPLC-BSC-120UC/21-21/SO46PLC-BSC-230UC/1/SENPLC-BSC-230UC/21PLC-BSC-230UC/21/SO46PLC-BSC-230UC/21-21PLC-BSC-230UC/21-21/SO46 PLC-BSC-230UC/21HC/SO46 PLC-BSP- 24DC/1/ACTPLC-BSP- 24DC/21PLC-BSP- 24DC/21-21PLC-BSP- 48DC/21PLC-BSP- 48DC/21-21PLC-BSP-230UC/21/SO46PLC-ESK GYPLC-OSC- 24DC/24DC/2PLC-OSC- 24DC/48DC/100 PLC-OSC- 24DC/48DC/100/SEN PLC-OSC-230UC/48DC/100 PLC-OSP- 12DC/300DC/1PLC-OSP- 24DC/230AC/1PLC-OSP- 24DC/24DC/10PLC-OSP- 24DC/24DC/2PLC-OSP- 24DC/24DC/2/ACT PLC-RSC- 12DC/21PLC-RSC- 12DC/21-21PLC-RSC- 24DC/1/ACTPLC-RSC- 24DC/1-1/ACTPLC-RSC- 24DC/1IC/ACTPLC-RSC- 24DC/21PLC-RSC- 24DC/21-21PLC-RSC- 24DC/21AUPLC-RSC- 24DC/21HCPLC-RSC- 24UC/21PLC-RSC- 24UC/21-21PLC-RSC-120UC/21PLC-RSC-120UC/21-21PLC-RSC-230UC/1AU/SENPLC-RSC-230UC/21PLC-RSC-230UC/21/SO46PLC-RSC-230UC/21-21PLC-RSC-230UC/21-21/SO46 PLC-RSC-230UC/21HCPLC-RSP- 24DC/1/ACTPLC-RSP- 24DC/1AU/SENPLC-RSP- 24DC/21PLC-RSP-230UC/1/SENPLC-RSP-230UC/1AU/SENPLC-RSP-230UC/21PLC-RSP-230UC/21-21PLC-V8/FLK14/INPLC-V8/FLK14/OUTPND ADAPTER VGA USBPOWERSET BC/3/FM/PLUSPOWERSET BC/3+1/FMPOWERSET BC/3+1-100/FMPOWERSET-BC-CTRL/KYPPC 5315 PMPPS BASIC I/MPPS CD MPPS STANDARD I/MPR2-BSC3/4X21通用型初级开关电源2938578 QUINT-PS-100-240AC/24DC/2.5 2938581 QUINT-PS-100-240AC/24DC/5 2866255 QUINT-PS-100-240AC/48DC/5 2938594 QUINT-PS-3X400-500AC/24DC/5 2938811 QUINT-PS-100-240AC/12DC/10 2938604 QUINT-PS-100-240AC/24DC/10 2938248 QUINT-PS-100-240AC/48DC/10 2938617 QUINT-PS-3X400-500AC/24DC/10 2938219 QUINT-PS-3X400-500AC/48DC/10 2938620 QUINT-PS-100-240AC/24DC/20 2938976 QUINT-PS-100-240AC/48DC/20 2938727 QUINT-PS-3X400-500AC/24DC/ 20 2938222 QUINT-PS-3X400-500AC/48DC/20 2938633 QUINT-PS-3X400-500AC/24DC/30 2938879 QUINT-PS-100-240AC/24DC/40 2938646 QUINT-PS-3X400-500AC/24DC/40 2866378 QUINT-PS-24DC/24DC/102938196 QUINT-PS-ADAPTERS7/12938206 QUINT-PS-ADAPTERS7/22866857 QUINT-ADAPTER/42938235 UWA 182/52超薄设计的初级开关电源2938714 MINI-PS-100-240AC/ 5DC/3 2938743 MINI-PS-100-240AC/2X15DC/1 2938756 MINI-PS-100-240AC/10-15DC/2 2866297 MINI-PS-100-240AC/10-15DC/8 2938840 MINI-PS-100-240AC/24DC/1 2866446 MINI-PS-100-240AC/24DC/1.3 2938730 MINI-PS-100-240AC/24DC/2 2938837 MINI-PS-100-240AC/24DC/4 2866336 MINI-PS-100-240AC/24DC/C2LPS 2866271 MINI-PS-48-60DC/24DC/1 2866284 MINI-PS-12-24DC/24DC/1 2866983 MINI-SYS-PS-100-240AC/24DC/1.5 阶梯设计的初级开关电源2938918 STEP-PS-100-240AC/ 5DC/4 2938921 STEP-PS-100-240AC/12DC/3 2938934 STEP-PS-100-240AC/15DC/2.4 2938947 STEP-PS-100-240AC/24DC/1.5 2938950 STEP-PS-100-240AC/48DC/0.75菲尼克斯电压隔离转换模块2766821 MCR-PS- 24DC/24DC/2002781877 MCR-PS- 24DC/2X24DC2940676 EG 45-PS-230AC/ 5DC/250 2940618 EG 45-PS-230AC/24DC/250防爆型初级开关电源和冗余模块2938853 QUINT-PS-100-240AC/24DC/5/EX 2938866 QUINT-PS-100-240AC/24DC/10/EX 2938963 QUINT-DIODE/40菲尼克斯不间断初级开关电源2866213 QUINT-BUFFER/24DC/202866226 QUINT-DC-UPS/24DC/102866239 QUINT-DC-UPS/24DC/202866242 QUINT-DC-UPS/24DC/402866349 QUINT-BAT/24DC/3.4AH2866352 QUINT-BAT/24DC/7.2AH2866365 QUINT-BAT/24DC/12AH菲尼克斯初级开关电源单元2866268 TRIO-PS/1AC/24DC/2.52866310 TRIO-PS/1AC/24DC/52866323 TRIO-PS/1AC/24DC/102866459 TRIO-PS/3AC/24DC/102866381 TRIO-PS/1AC/24DC/202866394 TRIO-PS/3AC/24DC/202866404 TRIO-PS/3AC/24DC/40菲尼克斯电压调整模块2954963 EMG 45-NZG/G 5/SI2943903 EMG 30-NZG/G 5/SI2954976 EMG 45-NZG/G12/SI2943916 EMG 30-NZG/G12/SI2954992 EMG 45-NZG/G15/SI2943929 EMG 30-NZG/G15/SI2954989 EMG 45-NZG/G24/SI2943932 EMG 30-NZG/G24/SI2941060 EMG 75-NZG/G 5/22941057 EMG 75-NZG/G12/22941044 EMG 75-NZG/G15/22942454 EMG 75-NZG/G24/22736686 ASI QUINT 100-240/2.4 EFD2736699 ASI QUINT 100-240/4.8 EFD2943738 EMG 45-SD-D/LA/SI2940825 EMG 45-SD-D/LA/SI YE2941523 EMG 90-2SD-D/LA菲尼克斯防雷器、菲尼克斯浪涌保护器：菲尼克斯电源第一级防雷器2858467 AEC组合防雷器 POWERSET BC/3+1-100/FM1 2816881 电源第一级防雷器 FLT 35/3 通流量35KA（三相）2 2817482 电源第一级防雷器 FLT 35/3+1 通流量35KA（三相）3 2838940 电源第一级防雷器 FLT 35-260 通流量35KA（单相）4 2816904 电源第一级防雷器 FLT 50 N/PE 通流量50KA（N-E）5 2838160 电源第一级防雷器 FLT 100-260 通流量100KA（单相）6 2809717 电源第一级防雷器 FLT 25-400 通流量25KA7 2748603 电源第一级防雷器 FLT 60-400 通流量60KA8 2816386 电源第一级防雷器 FLT-PLUS 通流量50KA9 电源第一级防雷器 FLT 25-400/3+1 通流量50KA10 2856317 电源第一级防雷器 FLT 35/3+1 CTRL-0.9/I 通流量35KA（三相带指示灯）11 2856304 电源第一级防雷器 FLT 35/3 CTRL-0.9/I 通流量35KA（三相带指示灯）12 2817411 电源第一级防雷器 FLT 35 CTRL-0.9 通流量35KA（单相）13 2817424 电源第一级防雷器 FLT 35 CTRL-0.9/I 通流量35KA（单相，带指示灯）14 2817453 电源第一级防雷器 FLT 50 N/PE CTRL-1.5 通流量50KA（N-E）15 2818643 电源第一级防雷器 FLT-PLUS CTRL-0.9 通流量50KA,残压0.9KV16 2818960 电源第一级防雷器 FLT-PLUS CTRL-0.9/I 通流量50KA,残压0.9KV 电源第二级防雷器特价供应菲尼克斯电源，菲尼克斯安全栅，菲尼克斯端子，菲尼克斯继电器，大量库存.17 5772061 电源第二级防雷器 VAL-MS 320/1+1 通流量40KA单相8/20us、耐压320V18 5772074 电源第二级防雷器 VAL-MS 320/1+1-FM 同上、带遥信19 5772029 电源第二级防雷器 VAL-MS 230/1+1 通流量40KA单相8/20us、耐压275V20 5772032 电源第二级防雷器 VAL-MS 230/1+1-FM 同上、带遥信21 5772045 电源第二级防雷器 VAL-MS 230 IT/1+1 通流量40KA单相8/20us、耐压385V22 5772058 电源第二级防雷器 VAL-MS 230 IT/1+1-FM 同上、带遥信23 2838209 电源第二级防雷器 VAL-MS 230/3+1 通流量40KA三相8/20us24 2858548 电源第二级防雷器 VAL-MS 230 IT/3+1 通流量40KA三相8/20us25 2838199 电源第二级防雷器 VAL-MS 230/3+1 FM 通流量40KA（带遥信）三相8/20us26 2858551 电源第二级防雷器 VAL-MS 230 IT/3+1-FM 通流量40KA（带遥信）三相8/20us27 2858564 电源第二级防雷器 VAL-MS 320/3+1 通流量40KA三相8/20us28 2858577 电源第二级防雷器 VAL-MS 320/3+1-FM 通流量40KA三相8/20us29 直流48V防雷器 VAL-MS 60 通流量40KA（不带遥信）30 2817987 电源第二级防雷器 F-MS 12 通流量40KA（N-E）31 2817974 电源第二级防雷器 F-MS 12/FM 通流量40KA（N-E，带遥信）电源第三级防雷器32 2858357 电源第三级防雷器 PT 2-PE/S-230AC 通流量10KA、单相33 2839389 电源第三级防雷器 CBT-4MS 通流量5KA、4孔34 2762100 电源第三级防雷器 MT-4PE-230AC 通流量6.5KA、三相34 电源第三级防雷器 CBT-SCHUKO 通流量6.5KA、三相退耦器35 2749660 退耦器 LT35 额定电流35A36 2818546 退耦器 LT63 额定电流63A信号防雷器37 2839541 馈线防雷器 CF-UB-280DC-SB-SET 带接头38 2818148 馈线防雷器 CN-UB-280DC-SB N接头39 2809490 2M线防雷器 CN-UFB-5DC/E-LAN40 2782300 2M线防雷器 C-UFB-5DC/E2782313 C-UFB-24DC/E41 2838555 ISDN防雷器 CTM ISDN 插拔式42 2748276 ISDN防雷器 D-TR1/ISDN-A/RJ45-BB RJ4543 2838539 ADSL/电话线 CTM 1x2-110AC44 2838513 DDN CTM 1x2-24DC45 2838610 CTM接地架 CTM 10-MAG46 2765547 CTM接地架 CT 1-10-ES47 2818795 电话线防雷器 D-FM-A/RJ45-BB RJ45接口48 2838937 模拟电话信号 MT-2FM-RJ12 2路接口（RJ12接口）49 2858043 DDN/桢中继 PT3-HF-12DC-ST 插头，工作电压12V50 2856113 DDN/桢中继 PT 1x2-BE PT1＊2底座51 2818973 以太网防雷器 D-LAN-A/RJ45-BS RJ45接口52 2838050 广域网防雷器 D-DS1-A/RJ45-BB53 2749644 无线收发设备防雷器 C-RF54 2818067 有线电视防雷器 CF-TV-30DC-BB F接口55 2749631 有线电视防雷器 C-TV DIN接口56 2762278 RS485 MT-RS485/S57 2782601 RS485 D-UFB-485/BS-B58 2796118 V.11/RS-422 D-UFB-V11/SB-B59 2762773 V.24/RS-232C D-UFB-V24/S-DSUB 9/SB-B60 2763701 视频信号防雷器 C-UB/E61 2782245 视频信号防雷器 C-UB62 2838050 T1/E1 D-DS1-A/RJ45-BB RJ45接口63 2838228 4-20mA模拟信号防雷器 PT 2x2-24DC-ST 通流量10KA(插头)，2路保护UK1.5NUK1.5N BUUK2.5B UK2.5B BUUK3NUK3N BUUK 5NUK 5N BUUK 6NUK 6N BUUK 10NUK 10N BUUK 16NUK 16N BUUIK 35UIK 35 BUUK 35UKH 50UKH 50 BUUKH 95UKH 95 BUUKH 150UKH 150 BUUKH 240USLKG 1.5NUSLKG 2.5USLKG 3USLKG 5USLKG 6NUSLKG 10NUSLKG 16NUISLKG 35USLKG35USLKG50USLKG95UK 5-MTK-P/PUK 5-HESIUK 5-HSILED 24UK 5-HESILA 250 UK 10-DREHSI(5×20) URTK/SMBK 5/E-ZMBK 3/E-ZMBKKB 2.5UK 3-TWINUK 10-TWINUK 5-TWINUDK3UDK3-PEUDK4UDK4 BUUDK4-MTK-P/PUKK3UKK3 BUUKK5UKK5 BUDIK 1.5DIKD 1.5DOK 1.5URTKK 6-CAK4AK16AK35AKG 4 BUAKG 4 GNYEAKG 4 BKAKG 16 BUAKG 16 GNYEAKG 16 BKAKG 35 BUAKG 35 BKAZK 35D-URTKD-UK 2.5D-UK 4/10D-UK 16TS-RTKATS-RTKTS-KK3TS-KATP-UKATP-UK 5-MTKTP-UK35D-MBKKB 2.5DP-MBKKB2.5D-MBK/ED-UK 5-TWIND-UKK 3/5DP-UKK3/5DG-UKK3/5D-UDK4ATP-UKK3/5MPS-IH WHMPS-IH RDMPS-IH BUMPS-IH YEMPS-IH GNMPS-IH VTMPS-IH GYMPS-IH BKMPS-MTSAGK 10-UKH50AGK 10-UKH95AKG 10-UKH 150/240 UKH 50 EPUKH 150/240 EPFB10-6FB10-8FB10-10FB10-12FB2-15FB3-15FBRN 10-4NFBRI 2-5NFBRI 3-5NFBRI 4-5NFBRI 5-5NFBRI 10-5NFBRNI 2-5NFBRNI 3-5NFBRNI 10-5NFBI 2-6FBI 3-6FBI 5-6FBI 10-6FBI 2-8FBI 3-8FBI 5-8FBI 10-8FBI 2-10FBI 3-10 FBI 5-10 FBI 10-10FBI 10-12FB2-RTK/SFB3-RTK/SFB5-RTK/SFB10-RTK/SFBI 2-15FBI 3-15FBI 5-15FBI 2-20ISSBI 10-6ISSBI 10-10 ISSBI 10-8EB 10-5EB 3-5EB 2-5EBL 10-5EBL 2-5EBL 3-5EB 10-6EB 3-6EB 2-6EB 10-8EB 3-8EB 2-8EBS 10-8 EBS 3-8 EBS 2-8EB 10-10EB 3-10EB 2-10EB 10-12EB10-15EB 80-DIK BUEB 80-DIK RDSB 2-RTK/SSB 4-RTK/SUSB 2-RTK/SASB 2-RTK/SIS-K 4IS-K 10USBR 2-7KSS 6KSS 3-6 KSS 4-8 KSS 8RPSPS-IH WHPS-IH BUPS-IH YEPS-IH GNPS-IH VTPS-IH GYPS-IH BKPS-MTPSBJ 3/13/4 PSB 6/5/6 PSB 4/7/6PSB 3/10/4WS 3-6WS 3-8WS 4-6WS 4-8WS 4-15WS 5-6WS 5-8WS 5-15WS 3/4-UKH 50/25WS 4/5-UKH 50/25KLM-A+ES/KLM-GBUBE/D+ES/KMK3ST 1.5ST 1.5 BUST 2.5 ST 2.5 BUST4ST4 BUST6ST6 BUST10ST10 BUST16ST16 BUST35ST35 BUSTS2.5STS 2.5 BUSTS4 STS4 BUST1.5-PEST2.5-PEST4-PEST6-PEST 10-PEST 16-PEST 35-PESTS2.5-PESTS4-PEMZB1.5MZB1.5-NS35 MZDB1.5MZDB1.5-NS35MZB1.5-FMZB1.5-MMZDB1.5-FMZDB1.5-MMZB1.5-RZMZDB1.5-RZMZB1.5-PEMZB1.5-NS35-PEZRTK4ST1.5-TWINST2.5-TWINST4-TWIN ST6-TWINSTS2.5-TWINSTS4-TWINST1.5-QUATTROST2.5-QUATTROST4-QUATTROSTS4-QUATTROSTS2.5-QUATTROSTTB1.5STTB2.5STTB4ST1.5-TWIN-P E ST1.5-QUATTRO-PEST2.5-TWIN-PEST2.5-QUATTRO-PEST4-TWIN-PEST4-QUATTRO-PESTS4-TWIN-PESTS4-QUATTRO-PESTS2.5-TWIN-PESTS2.5-QUATTRO-PESTTB2.5-PEST2.5-MTST2.5-TGST4-HESI(5×20)ST2.5/1P ST2.5-QUATTRO/2P STTB2.5/2PSP2.5/1-LSP2.5/1-MSP2.5/1-RSPB2.5/1-LSPB2.5/1-MSPB2.5/1-RSPDB2.5/1-LSPDB2.5/1-MSPDB2.5/1-RFBS2-4FBS3-4FBS4-4FBS5-4FBS10-4FBS20-4 FBS2-5FBS3-5FBS4-5FBS5-5FBS10-5FBS20-5FBS2-6FBS3-6FBS4-6FBS5-6FBS10-6FBS20- FBS2-8FBS3-8FBS4-8FBS5-8FBS10-8FBS2-10FBS2-12FBS2-16D-MZB1.5D-MZB1.5-FD-MZB1.5-NS35D-ST2.5D-ST4D-ST6D-ST10D-ST16D-STS2.5D-STS4D-ST2.5-TWIND-ST4-TWIND-ST2.5-QUATTROD-ST4-QUATTROD-STTB2.5D-STTB4D-ZRTK4DS-ST2.5DS-ST4ATP-ST4ATP-ST4 QUATTROZB空白标识条ZB:数字标识条普通（1-100）ZB:数字标识条特殊打印ZBFM4/WH:UNBEDRUCKT ZBFM5/WH:UNBEDRUCKT ZBFM6/WH:UNBEDRUCKTZBFM4:SO/CMSZBFM5:SO/CMSZBFM6:SO/CMSZBFM7:SO/CMSB-STIFT 记号笔NS35/7.5 1M PERFORATED NS35/7.5 1M UNPERFORATED NS15 GELOCHT METER(带孔) NS15 UNGELOCHT METERNS32 GELOCHT METERNS32 UNGELOCHT METERNS35/7.5 UNGELOCHT METER NS35/7.5 GELOCHT METER NS35/15 UNGELOCHT METER NS35/15 GELOCHT METER NLS-CU3/10 1ME/UK1E/UKE/AL-NS32E/AL-NS35CLIPFIX35AB/SSAP2 METERAP3 METERAP2-TUAP3-TUAP-ESAI0.5-8WHAI0.75-8BU AI 1-8RDAI 1.5-8BKAI2.5-8GYAI4-10OGAI6-12GNAI10-12BNAI16-12WHAI25-16BKAI35-16RDAI50-20BUAI120-27BUAI70-20YEAI95-25RDAI-TWIN 2×0.75-8GYAI-TWIN 2×1-8RDAI-TWIN 2×1.5-8BKAI-TWIN 2×2.5-10BUAI-TWIN 2×4-12GYCUTFOX EBCUTFOX FBCUTFOX35PPS STANDARD I/MPPS BASIC I/MCRIMPFOX ZA 3CRIMPFOX UD 6-4CRIMPFOX UD 10-4CRIMPFOX UD 6-6CRIMPFOX INC 6 CRIMPFOX-4.0-ED-2.50 CF3000-2.5ZAP 25TZAP 100TSZF 1-0.6X3.5QUICK-WIREFOX6QUICK-WIREFOX 2.5CYCLOPSNS 15 PERFORATED 1MNS 15 UNPERFORATED 1MNS 35/7.5 PERFORATED 1MNS 35/7.5 UNPERFORATED 1MNS 32 PERFORATED 1MNS 32 UNPERFORATED 1MNS 35/15 PERFORATED 1MNS 35/15 UNPERFORATED 1MOTTA2.5OTTA6OTTA6-P/P OTTA6-T-P/POTTA6-TOTTA 6-PEOTTA2.5-PEOTTA2.5-P/POTTA25-M5OTTA25-M6UK35 BUURTK6D-OTTA2.5D-OTTA25D-OTTA6D-OTTA6-TATP-OTTAUT2.5UT2.5 BUUT2.5-PEUT2.5/1PUT2.5/1P BUUT2.5/1P-PEUT4UT4 BUUT4-PE UT4-DIO/L-R UT4-DIO/R-LUT4-HEDIUT4-HEDI BUUT4-HEDI-P/PUT4-HESI(5×20)UT4-HESILA 250UT4-HESILED 24UT4-HESILED 60UT4-MTUTF-MT BU UT4-MTD BU UT4-MTD-DIO/L-R-P/P UT4-MTD-DIO/R-L-P/P UT4-MTD-PEUT4-MTD-PE/SUT4-MT-P/PUT4-MT-P/P BUUT4-MT-P/P OGUT4-TGUT4-TG-P/PUT6UT6 BUUT6-PEUT10UT10 BUUT10-PEUT16 UT16 BUUT16-PEUT35UT35 BUUT35-PED-UT 2.5/10D-UT 2.5/1PD-UT16ATP-UTQTC1.5QTC1.5 BUQTC1.5-PEQTC1.5-QUATTRO QTC1.5-QUATTRO BU QTC1.5-QUATTRO-PE QTC1.5-TWINQTC1.5-TWIN BU QTC1.5-TWIN-PE QTC2.5QTC2.5 BUQTC2.5-PEQTC2.5-TWINQTC2.5-TWIN BU QTC2.5-TWIN-PED-QTC1.5D-QTC1.5-QUATTRO D-QTC1.5-TWIND-QTC2.5D-QTC2.5-TWINATP-QTCATP-QTC QUATTROATP-QTC TWINATP-QTTCBHDFK10 HDFKV10HDFK16HDFKV16HDFK25HDFKV25HDFK95HDFKV95HDFK4HDFKV4HDFK50HDFKV50ST4-HESILED24(5X20)ST4-HESILED24(6.3X32)MC1.5/2-GF-3.81MCV1.5/2-GF-3.81MC1.5/2-STF-3.81MC1.5/3-GF-3.81MCV1.5/3-GF-3.81MC1.5/3-STF-3.81MC1.5/4-GF-3.81MCV1.5/4-GF-3.81MC1.5/4-STF-3.81MC1.5/5-GF-3.81MCV1.5/5-GF-3.81MC1.5/5-STF-3.81MC1.5/6-GF-3.81MCV1.5/6-GF-3.81MC1.5/6-STF-3.81MC1.5/7-GF-3.81MCV1.5/7-GF-3.81 MC1.5/7-STF-3.81 MC1.5/8-GF-3.81MCV1.5/8-GF-3.81MC1.5/8-STF-3.81MC1.5/9-GF-3.81MCV1.5/9-GF-3.81MC1.5/9-STF-3.81MC1.5/10-GF-3.81MCV1.5/10-GF-3.81MC1.5/10-STF-3.81MC1.5/11-GF-3.81 MCV1.5/11-GF-3.81 MC1.5/11-STF-3.81MC1.5/12-GF-3.81MCV1.5/12-GF-3.81MC1.5/12-STF-3.81MC1.5/13-GF-3.81MCV1.5/13-GF-3.81MC1.5/13-STF-3.81MC1.5/14-GF-3.81MCV1.5/14-GF-3.81MC1.5/14-STF-3.81MC1.5/15-GF-3.81MCV1.5/15-GF-3.81MC1.5/15-STF-3.81MC1.5/16-GF-3.81MCV1.5/16-GF-3.81MC1.5/16-STF-3.81UTA159 MSTBV2.5/6-GF-5.08 MVSTBR2.5/6-STF-5.08MSTBV2.5/7-STF-5.08MUSTBR2.5/7-STF-5.08MSTBV2.5/11-GF-5.08MVSTBR2.5/11-STF-5.08MSTBV2.5/20-GF-5.08MVSTBR2.5/20-STF-5.08MDSTBV2.5/16-GF-5.08UMSTBVK2.5/2-G-5.08UMSTBVK2.5/3-G-5.08DFK-MSTB2.5/6-G-5.08DFK-MSTB2.5/10-G-5.08UMK-SE-11.25DFK-MSTB2.5/10-GF-5.08FRONT4-H-7.62MDSTB2.5/2-GFL-5.08MDSTB2.5/2-GFR-5.08AI-TWIN2*0.5-8WHAI0.5-6WH REL-MR-12DC/21REL-MR-24DC/21PLC-OSC-24DC/24DC/2PLC-BSC-24DC/21QUINT-PS-100-240AC/24DC/10 QUINT-PS-100-240AC/24DC/5PLC-RSC-48DC/21-21PLC-BSP-24DC/21(底座)PLC-RSP-24DC/21PLC-BSC-230UC/21(底座)DPT-24DC/24DC/2PLC-OSC-230UC/48DC/100MPS-MTMPS-1H-RDSZS0.6*3.5URTK/S-BEN ST2.5-QUATTRO-DI0/L-R MBKKB2.5-DI0/0-UKMKKMK2KMK3KMK4UKKB10ZDMTK 2.5ZDMTK 2.5 BUST-BEUK4-TGAI0.75-6GYAI2.5-8BUAI6-12YEMBK2.5/EST2.5-QUATTRO BU ST4-QUATTRO BUMZB1.5-MMZB1.5-F MBK 5/E-TG UBE+ES/KMK3SZF0-0.4*2.5SZF2-0.8*4.01B 1L AO 1/SFSZS0.4*2.5UK10-PLUSUK10-DREHSI(6.3*32) ZFK6-DREHSI(6.3*32) ESL 40*17DP-UKK3/5DG-UKK3/5MTK-P/PST6-TWIN BUD-ST6 TWIN ST6-TWIN AI1.5-10BKMKDSN1.5/2-5.08 MKDSN1.5/3-5.08 MKDS1.5/2-5.08 MKDS1.5/3-5.08 MKDS3/2-5.08MKDS3/3-5.08 MKDSP1.5/2-5.08 MKDSP1.5/3-5.08 SMKDSP1.5/2-5.08 SMKDSP1.5/3-5.08 MKKDSN1.5/2-5.08 MKKDSN1.5/3-5.08 MKKDS1.5/2-5.08 MKKDS1.5/3-5.08 MKKDS3/2-5.08 MKKDS3/3-5.08 GMKDS1.5/2-7.62 GMKDS1.5/3-7.62GMKDS3/2-7.62GMKDS3/3-7.62FRONT2.5-H/SA5D-FRONT2.5-V-O.Z.D-FRONT2.5-H-O.Z.FRONT2.5-V/SA5FFKDS/V-2.54FFKDS/H-2.54FFKDSA1/V-5.08FFKDSA1/H-5.08FFKDS/V-3.81FFKDS/H-3.81FFKDSA1/V-6.35FFKDSA1/H-6.35FFKDS/V1-5.08FFKDS/H1-5.08 FFKDSA1/1V-7.62 FFKDSA1/H1-7.62FFKDSA/H1-7.62FFKDSA/V1-7.62ZFKDS1-3.81ZFKDSA1-6.35ZFKDS1.5-5.08ZFKDSA1.5-7.62ZFKKDS1.5-5.08ZFKKDSA1.5-6.08ZFKDS1.5C-5.0ZFKDSA1.5C-6.0ZFKKDS1.5C-5.0ZFKKDSA1.5C-5.0LZFKKDSA1.5C-6.0RZFKDS2.5-5.08ZFKDS2.5-5.08LZFKDSA2.5-6.08RZFKKDS2.5-5.08ZFKKDSA2.5-6.08RZFKKDS2.5-5.08LZFKDS4-7.5ZFKDS4-10ZFKDSA4-9MC1.5/2-ST-3.81 MC1.5/3-ST-3.81 MC1.5/4-ST-3.81MC1.5/5-ST-3.81MC1.5/6-ST-3.81MC1.5/7-ST-3.81MC1.5/8-ST-3.81MC1.5/9-ST-3.81MC1.5/10-ST-3.81MC1.5/11-ST-3.81MC1.5/12-ST-3.81MC1.5/13-ST-3.81MC1.5/14-ST-3.81MC1.5/15-ST-3.81MC1.5/16-ST-3.81MC1.5/2-G-3.81MC1.5/3-G-3.81MC1.5/4-G-3.81MC1.5/5-G-3.81MC1.5/6-G-3.81MC1.5/7-G-3.81MC1.5/8-G-3.81MC1.5/9-G-3.81MC1.5/10-G-3.81MC1.5/11-G-3.81MC1.5/12-G-3.81MC1.5/13-G-3.81MC1.5/14-G-3.81MC1.5/15-G-3.81MC1.5/16-G-3.81MCV1.5/2-G-3.81MCV1.5/3-G-3.81MCV1.5/4-G-3.81MCV1.5/5-G-3.81MCV1.5/6-G-3.81MCV1.5/7-G-3.81MCV1.5/8-G-3.81MCV1.5/9-G-3.81MCV1.5/10-G-3.81MCV1.5/11-G-3.81MCV1.5/12-G-3.81MCV1.5/13-G-3.81MCV1.5/14-G-3.81MCV1.5/15-G-3.81MCV1.5/16-G-3.81MSTB2.5/2-ST-5.08MSTB2.5/3-ST-5.08MSTB2.5/4-ST-5.08MSTB2.5/5-ST-5.08MSTB2.5/6-ST-5.08MSTB2.5/7-ST-5.08MSTB2.5/8-ST-5.08MSTB2.5/9-ST-5.08MSTB2.5/10-ST-5.08MSTB2.5/11-ST-5.08MSTB2.5/12-ST-5.08MSTB2.5/13-ST-5.08MSTB2.5/14-ST-5.08MSTB2.5/15-ST-5.08MSTB2.5/16-ST-5.08 MSTB2.5/17-ST-5.08 MSTB2.5/18-ST-5.08MSTB2.5/19-ST-5.08MSTB2.5/20-ST-5.08MVSTBR2.5/2-ST-5.08MVSTBR2.5/3-ST-5.08MVSTBR2.5/4-ST-5.08MVSTBR2.5/5-ST-5.08MVSTBR2.5/6-ST-5.08MVSTBR2.5/7-ST-5.08MVSTBR2.5/8-ST-5.08MVSTBR2.5/9-ST-5.08MVSTBR2.5/10-ST-5.08MVSTBR2.5/11-ST-5.08MVSTBR2.5/12-ST-5.08MVSTBR2.5/13-ST-5.08MVSTBR2.5/14-ST-5.08MVSTBR2.5/15-ST-5.08MVSTBR2.5/16-ST-5.08MVSTBW2.5/2-ST-5.08MVSTBW2.5/3-ST-5.08MVSTBW2.5/4-ST-5.08MVSTBW2.5/5-ST-5.08 MVSTBW2.5/6-ST-5.08 MVSTBW2.5/7-ST-5.08MVSTBW2.5/8-ST-5.08MVSTBW2.5/9-ST-5.08MVSTBW2.5/10-ST-5.08MVSTBW2.5/11-ST-5.08MVSTBW2.5/12-ST-5.08MVSTBW2.5/13-ST-5.08MVSTBW2.5/14-ST-5.08MVSTBW2.5/15-ST-5.08MVSTBW2.5/16-ST-5.08FKC2.5/2-ST-5.08FKC2.5/3-ST-5.08FKC2.5/4-ST-5.08FKC2.5/5-ST-5.08FKC2.5/6-ST-5.08FKC2.5/7-ST-5.08FKC2.5/8-ST-5.08FKC2.5/9-ST-5.08FKC2.5/10-ST-5.08FKC2.5/11-ST-5.08FKC2.5/12-ST-5.08 FKC2.5/13-ST-5.08 FKC2.5/14-ST-5.08FKC2.5/15-ST-5.08FKC2.5/16-ST-5.08MSTBA2.5/2-G-5.08MSTBA2.5/3-G-5.08MSTBA2.5/4-G-5.08MSTBA2.5/5-G-5.08MSTBA2.5/7-G-5.08MSTBA2.5/8-G-5.08MSTBA2.5/9-G-5.08MSTBA2.5/10-G-5.08MSTBA2.5/11-G-5.08MSTBA2.5/12-G-5.08MSTBA2.5/13-G-5.08MSTBA2.5/14-G-5.08MSTBA2.5/15-G-5.08MSTBA2.5/16-G-5.08MSTBA2.5/17-G-5.08MSTBA2.5/18-G-5.08MSTBA2.5/19-G-5.08MSTBA2.5/20-G-5.08MSTBVA2.5/2-G-5.08MSTBVA2.5/3-G-5.08MSTBVA2.5/4-G-5.08MSTBVA2.5/5-G-5.08MSTBVA2.5/6-G-5.08MSTBVA2.5/7-G-5.08MSTBVA2.5/8-G-5.08MSTBVA2.5/9-G-5.08MSTBVA2.5/10-G-5.08MSTBVA2.5/11-G-5.08MSTBVA2.5/12-G-5.08MSTBVA2.5/13-G-5.08MSTBVA2.5/14-G-5.08MSTBVA2.5/15-G-5.08MSTBVA2.5/16-G-5.08MSTBVA2.5/17-G-5.08MSTBVA2.5/18-G-5.08MSTBVA2.5/19-G-5.08MSTBVA2.5/20-G-5.08GMSTB2.5/2-ST-7.62 GMSTB2.5/3-ST-7.62 GMSTB2.5/4-ST-7.62GMSTB2.5/5-ST-7.62GMSTB2.5/7-ST-7.62GMSTB2.5/8-ST-7.62GMSTB2.5/9-ST-7.62GMSTB2.5/10-ST-7.62GMSTB2.5/11-ST-7.62GMSTB2.5/12-ST-7.62GMSTBA2.5/2-G-7.62GMSTBA2.5/3-G-7.62GMSTBA2.5/4-G-7.62GMSTBA2.5/5-G-7.62GMSTBA2.5/6-G-7.62GMSTBA2.5/7-G-7.62 GMSTBA2.5/8-G-7.62 GMSTBA2.5/9-G-7.62GMSTBA2.5/10-G-7.62GMSTBA2.5/11-G-7.62GMSTBA2.5/12-G-7.62GMSTBVA2.5/2-G-7.62GMSTBVA2.5/3-G-7.62GMSTBVA2.5/4-G-7.62GMSTBVA2.5/5-G-7.62GMSTBVA2.5/6-G-7.62GMSTBVA2.5/7-G-7.62GMSTBVA2.5/8-G-7.62GMSTBVA2.5/9-G-7.62GMSTBVA2.5/10-G-7.62GMSTBVA2.5/11-G-7.62GMSTBVA2.5/12-G-7.62CR-MSTBCP-MSTBSK U/2.8 WH:UNBEDRUCKTSK U/3.8 WH:UNBEDRUCKTSK 5/3.8:UNBEDRUCKTSK 5.08/3.8:UNBEDRUCKTME12.5UT GNME12.5OT-MSTBO SETME12.5OT-MKDSO SETME17.5UT GNME17.5OT-MSTBO SETME17.5OT-MKDSO SETME22.5UT GNME22.5OT-MSTBO SETME22.5OT-MKDSO SETUM72-PROFIL 200CMUM72-SEUM72-SEFE/LUM72-SEFE/RUM72-FEHC-B 6-EBUSHC-B 6-ESTSHC-B 10-EBUSHC-B 10-ESTSHC-B 16-EBUSHC-B 16-ESTSHC-B 24-EBUSHC-B 24-ESTSHC-B 6-TFL-43/M1PG13.5SHC-B 6-AMLHC-B 10-TFQ-52/M1PG16SHC-B 10-AMQHC B 16-TFQ-76/M1PG21SHC-B 16-AMQHC-B 24-AMQHC-B 24-TFQ-76/M1PG21SHC-B 48-TFL-96/M1PG29SHC-B 48-AML HC-B 32-TFQ-80/M1PG29S HC-B 32-AMQHC-D 25-EBUCHC-D 25-ESTCHC-D 40-EBUCHC-D 40-ESTCHC-A 10-ESTSHC-A 10-EBUSHC-A 3-ESTSHC-A 3-EBUSHC-A 4-EBUSHC-A 4-ESTSHC-D 7-AML-24/GR ALUHC-D 7-TFL-48/M1PG11G ALUHC-D 15-TFL-66/M1PG16SHC-D 15-AMLHC-D 25-TFL-72/M1PG16SHC-D 25-AMLHC-D 50-TFQ-76/M1PG29SHC-D 50-AMQHC-A 16-EBUSHC-A 16-ESTS CK1.6-ED-0.75ST AG CK1.6-ED-1.00ST AGCK1.6-ED-1.50ST AGCK1.6-ED-0.75BU AGCK1.6-ED-1.00BU AGCK1.6-ED-1.50BU AGSACB-4/4-L-CSACB-4/8-L-CSACB-8/8-L-CSACB-8/16-L-CSACB-4/4-CSACB-4/8-CSACB-8/8-CSACB-8/16-CSACB-4/4-L-C-90SACB-4/8-L-C-90SACB-8/8-L-C-90SACB-8/16-L-C-90SACB-4/4-C 90SACB-4/8-C 90SACB-8/8-C 90SACB-8/16-C 90SACB-4/8-5.0PURSACB-4/8-10.0PURSACB-8/16-5.0PURSACB-4/4-5.0PURSACB-4/4-10.0PURSACB-8/8-5.0PUR SACB-8/8-10.0PUR SACB-4/4-L-5.0PURSACB-4/4-L-10.0PURSACB-4/8-L-5.0PURSACB-4/8-L-10.0PURSACB-8/8-L-5.0PURSACB-8/8-L-10.0PURSACB-8/16-L-5.0PURSACB-8/16-L-10.0PURSACB-4/4-L-SCSACB-8/8-L-SCSACB-4/8-L-SCSACB-8/16-L-SCSACB-4/4-SCSACB-8/8-SCSACB-4/8-SC SACB-8/16-SCSACB-4Q/4P-5.0PURSACB-4Q/4P-10.0PURSACB-8Q/4P-5.0PURSACB-8Q/4P-10.0PURSACB-4Q/4P-L-5.0PURSACB-4Q/4P-L-10.0PURSACB-8Q/4P-L-5.0PURSACB-8Q/4P-L-10.0PURSACB-4Q/4P-L-SCSACB-8Q/4P-L-SCSACB-4Q/4P-SCSACB-8Q/4P-SCSACB-4/4-L-M23SACB-4/8-L-M23SACB-8/8-L-M23SACB-8/16-L-M23 SACB-4/4-L-M23 180 SACB-4/8-L-M23 180SACB-8/8-L-M23 180SACB-4/4-M23 180SACB-4/8-M23 180SACB-8/8-M23 180SACB-8/16-M23 180SACB-4/4-M23 SACB-4/8-M23 SACB-8/8-M23SACB-8/16-M23SAC-3P-M12MS/1.5-PURSAC-3P-M12MS/3.0-PURSAC-3P-M12MS/5.0-PURSAC-3P-M12MR/1.5-PURSAC-3P-M12MR/3.0-PURSAC-3P-M12MR/5.0-PURSAC-3P-M12MS/1.5-PUR/M 8FS SAC-3P-M12MS/3.0-PUR/M 8FS SAC-3P-M12MS/1.5-PUR/M 8FR SAC-3P-M12MS/3.0-PUR/M 8FR SAC-3P-M12MR/1.5-PUR/M 8FS SAC-3P-M12MR/3.0-PUR/M 8FS SAC-3P-M12MR/1.5-PUR/M 8FR SAC-3P-M12MR/3.0-PUR/M 8FR SAC-3PQ-1.5-PUR/M 8FSSAC-3PQ-3.0-PUR/M 8FS SAC-3PQ-5.0-PUR/M 8FSSAC-3PQ-1.5-PUR/M 8FRSAC-3PQ-3.0-PUR/M 8FRSAC-3PQ-5.0-PUR/M 8FRSAC-3P-M12MS/1.5-PUR/M12FS SAC-3P-M12MS/3.0-PUR/M12FS SAC-3P-M12MS/1.5-PUR/M12FR SAC-3P-M12MS/3.0-PUR/M12FR SAC-3P-1.5-PUR/M12FSSAC-3P-3.0-PUR/M12FSSAC-3P-1.5-PUR/M12FRSAC-3P-3.0-PUR/M12FRSAC-3P-5.0-PUR/M12FRSAC-4P-M12MS/1.5-PURSAC-4P-M12MS/3.0-PURSAC-4P-M12MS/5.0-PURSAC-4P-1.5-PUR/M12FSSAC-4P-3.0-PUR/M12FSSAC-4P-5.0-PUR/M12FSSAC-4P-M12MR/1.5-PURSAC-4P-M12MR/3.0-PURSAC-4P-M12MR/5.0-PURSAC-4P-1.5-PUR/M12FRSAC-4P-3.0-PUR/M12FRSAC-4P-5.0-PUR/M12FRSAC-4P-M12MS/1.5-PUR/M12FS SAC-4P-M12MS/3.0-PUR/M12FS SAC-4P-M12MS/1.5-PUR/M12FR SAC-4P-M12MS/3.0-PUR/M12FR SAC-4P-M12MR/1.5-PUR/M12FS SAC-4P-M12MR/3.0-PUR/M12FS SAC-4P-M12MR/1.5-PUR/M12FR SAC-4P-M12MR/3.0-PUR/M12FR SAC-4P-M12MS/1.5-PUR/M 8FS SAC-4P-M12MS/3.0-PUR/M 8FS SAC-5P-M12MS/1.5-PURSAC-5P-M12MS/3.0-PURSAC-5P-M12MS/5.0-PURSAC-5P-M12MR/1.5-PURSAC-5P-M12MR/3.0-PURSAC-5P-M12MR/5.0-PURSAC-5P-1.5-PUR/M12FSSAC-5P-3.0-PUR/M12FSSAC-5P-5.0-PUR/M12FSSAC-5P-1.5-PUR/M12FRSAC-5P-3.0-PUR/M12FRSAC-5P-5.0-PUR/M12FRSAC-5P-M12MS/1.5-PUR/M12FS SAC-5P-M12MS/3.0-PUR/M12FS SAC-5P-M12MS/1.5-PUR/M12FRSAC-5P-M12MS/3.0-PUR/M12FR SACC-M 8MS-3CON-M-SW SACC-M 8MS-4CON-M-SW SACC-M 8MS-3PCONSACC-M 8MS-4PCONSACC-M12MS-4CON-PG 7-M SACC-M12MS-5CON-PG 7-M SACC-M12MR-5CON-PG 7-M SACC-M12MR-4CON-PG 7-M SACC-M 8MS-3CON-MSACC-M 8MS-4CON-MSACC-M12MS-5CON-PG9-M SACC-M12MR-5CON-PG9-M SACC-M 8MR-3CON-MSACC-M 8FS-3PCONSACC-M 8FS-4PCONSACC-M 8FS-3CON-M-SW SACC-M 8FS-4CON-M-SW SACC-M12FS-5CON-PG 7-M SACC-M12FR-5CON-PG 7-M SACC-M12FS-4CON-PG 7-M SACC-M12FR-4CON-PG 7-M SACC-M 8FS-3CON-MSACC-M 8FS-4CON-MSACC-M12FS-5CON-PG9-M SACC-M12FR-5CON-PG9-M SACC-DSIV-M12MS-5CON-L180 SACC-DSIV-M12MS-5CON-L90 SACC-DSIV-M12FS-5CON-L180 SACC-DSIV-M12FS-5CON-L90 SACC-DSI-M12MS-5CON-L180 SACC-DSI-M8MS-3CON-L180 SACC-DSI-M8MS-4CON-L180 SACC-DSI-M12FS-5CON-L180 SACC-DSI-M8FS-3CON-L180 SACC-DSI-M8FS-4CON-L180 SAC-3P-5.0-PUR/M 8FSSAC-3P-5.0-PUR/M 8FRSAC-3P-1.5-PUR/M 8FSSAC-3P-3.0-PUR/M 8FSSAC-3P-1.5-PUR/M 8FRSAC-3P-3.0-PUR/M 8FRSAC-3P-M 8MS/1.5-PURSAC-3P-M 8MS/3.0-PURSAC-3P-M 8MS/5.0-PURSAC-3P-M 8MR/1.5-PURSAC-3P-M 8MR/3.0-PURSAC-3P-M 8MR/5.0-PURSAC-3P-M 8MS/1.5-PUR/M 8FS SAC-3P-M 8MS/3.0-PUR/M 8FS SAC-3P-M 8MS/1.5-PUR/M 8FR SAC-3P-M 8MS/3.0-PUR/M 8FR SAC-3P-M 8MS/1.5-PUR/M 12FS SAC-3P-M 8MS/3.0-PUR/M 12FS SAC-3P-M 8MS/1.5-PUR/M 12FR SAC-3P-M 8MS/3.0-PUR/M 12FR SAC-4P-M 8MS/1.5-PURSAC-4P-M 8MS/3.0-PURSAC-4P-M 8MS/5.0-PURSAC-4P-M 8MR/1.5-PURSAC-4P-M 8MR/3.0-PURSAC-4P-M 8MR/5.0-PURSAC-4P-1.5-PUR/M 8FSSAC-4P-3.0-PUR/M 8FSSAC-4P-5.0-PUR/M 8FSSAC-4P-1.5-PUR/M 8FRSAC-4P-3.0-PUR/M 8FRSAC-4P-5.0-PUR/M 8FRRCK-TGUM/BL12/5.0PUR-URCK-TGUM/BL12/10.0PUR-U RCK-TWUM/BL12/5.0PUR-URCK-TWUM/BL12/10.0PUR-U RCK-TGUM/BL16+3/5.0PUR-U RCK-TGUM/BL16+3/10.0PUR-U。