FORTRAN运行错误消息列表中英对照

F O R T R A N运行错误消息列表中英对照集团文件版本号：（M928-T898-M248-WU2669-I2896-DQ586-M1988）Fortran的运行时错误消息列表本节列出了英特尔Fortran运行时库（RTL）处理的错误。

对于每一个错误，该表提供了错误号，严重性代码，错误信息文本，条件符号名称，而错误的详细说明。

在程序中定义条件符号值（参数表），包括以下文件：for_iosdef.for如表中所述，消息的严重程度决定了发生下列情况：与信息和警告，程序继续执行与错误，结果可能会不正确与严重的，程序执行停止（除非指定了恢复方法）在最后一种情况下，为防止程序终止，您必须包含一个合适的I / O错误处理说明符并重新编译，或者对于某些错误，改变信号的缺省操作您再次运行该程序之前。

在下面的表中，第一列列出的错误号返回检测到I / O错误时iostat的变量。

第二列的第一行提供的消息，因为它会显示（以下forrtl：?），包括严重级别，消息号，消息文本。

第二列下面的行包含状态条件符号（如$ IOS_INCRECTYP）和消息的解释。

1?1严重（1）：不是??Fortran特定的错误美元IOS_NOTFORSPE。

在用户程序中或在RTL的错误不是英特尔Fortran的特定错误和通过任何其他英特尔Fortran运行时的消息重度（10）：不能覆盖已经存在的文件美元IOS_CANOVEEXI。

当指定的OPEN语句指定的文件XXX已存在状态='新'使用I / O单元×（创建新的文件）。

确保正确的文件名，目录路径，单元等等在源程序中指定。

决定是否：重命名或重新运行该程序前删除现有文件。

修改源文件来指定不同的文件规格，I / O单元，或OPEN语句状态。

重度（19）：无效的引用变量在NAMELIST输入美元IOS_INVREFVAR。

其中下列条件发生：该变量是不是名单??组的成员。

Fortran的运行时错误消息列表本节列出了英特尔Fortran运行时库（RTL）处理的错误。

对于每一个错误，该表提供了错误号，严重性代码，错误信息文本，条件符号名称，而错误的详细说明。

在程序中定义条件符号值（参数表），包括以下文件：for_iosdef.for如表中所述，消息的严重程度决定了发生下列情况：•与信息和警告，程序继续执行•与错误，结果可能会不正确•与严重的，程序执行停止（除非指定了恢复方法）在最后一种情况下，为防止程序终止，您必须包含一个合适的I / O错误处理说明符并重新编译，或者对于某些错误，改变信号的缺省操作您再次运行该程序之前。

在下面的表中，第一列列出的错误号返回检测到I / O错误时iostat的变量。

第二列的第一行提供的消息，因为它会显示（以下forrtl：?），包括严重级别，消息号，消息文本。

第二列下面的行包含状态条件符号（如$ IOS_INCRECTYP）和消息的解释。

脚注：1标识不IOSTAT返回的错误。

原网页：fortran_docs/compiler_f/main_for/mergedProjects/bldaps_for/common/bldaps_rterrs.htm 英文原版List of Run-Time Error MessagesThis section lists the errors processed by the Intel Fortran run-time library (RTL). For each error, the table provides the error number, the severity code, error message text, condition symbol name, and a detailed description of the error.To define the condition symbol values (PARAMETER statements) in your program, include the following file:for_iosdef.forAs described in the table, the severity of the message determines which of the following occurs:•with?info?and?warning, program execution continues•with?error, the results may be incorrect•with?severe, program execution stops (unless a recovery method is specified)In the last case, to prevent program termination, you must include either an appropriate I/O error-handling specifier and recompile or, for certain errors, change the default action of a signal before you run the program again.In the following table, the first column lists error numbers returned to IOSTAT variables when an I/O error is detected.The first line of the second column provides the message as it is displayed (following?forrtl:), including the severity level, message number, and the message text. The following lines of the second column contain the status condition symbol (such as FOR$IOS_INCRECTYP) and an explanation of the message.。

计算机常见报警错误信息中英文对照表一、B IOS中的提示信息Drive A error 驱动器A错误System halt 系统挂起Keyboard controller error 键盘控制器错误Keyboard error or no keyboard present 键盘错误或者键盘不存在BIOS ROM checksum error BIOS ROM 校验错误Single hardisk cable fail 当硬盘使用Cable选项时硬盘安装位置不正确FDD Controller Failure BIOS 软盘控制器错误HDD Controller Failure BIOS 硬盘控制器错误Driver Error 驱动器错误Cache Memory Bad, Do not Enable Cache 高速缓存Cache损坏，不能使用Error: Unable to control A20 line 错误提示：不能使用A20地址控制线Memory write/Read failure 内存读写失败Memory allocation error 内存定位错误CMOS Battery state Low CMOS没电了Keyboard interface error 键盘接口错误Hard disk drive failure 加载硬盘失败Hard disk not present 硬盘不存在Floppy disk(s) fail (40)软盘驱动器加载失败，一般是数据线插反，电源线没有插接，CMOS内部软驱设置错误CMOS checksum error-efaults loaded. CMOS校验错误，装入缺省(默认)设置二、BIOS刷新失败后，Bootblock启动时出现的提示信息Detecting floppy drive A media... 检测软驱A的格式Drive media is : 1.44Mb1.2Mb 720Kb 360K驱动器格式是1.44Mb、12Mb、720kb、360kb的一种DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER磁盘引导失败，插入系统盘后按任意键继续三、MBR主引导区提示信息Invalid partition table 无效的分区表Error loading operating sy stem 不能装入引导系统Missing operating system 系统引导文件丢失说明：如果在计算机启动过程中，在硬件配置清单下方(也就时在平时正常启动时出现Starting Windows 98…的地方)出现不可识别字符，此时可判断硬盘分区表损坏。

******************************** 编译错误信息********************************';' not allowed before 'ELSE' ElSE前不允许有“;”'<clause>' clause not allowed in OLE automation section 在OLE自动区段不允许“<clause>”子句'<name>' is not a type identifier <name>不是类型标识符'<name>' not previously declared as a PROPERTY <name>前面没有说明PROPERTY'GOTO <label>' leads into or out of TRY statement GOTO <label>进入或超出TRY语句的范围<clause1> clause expected, but <clause2> found 要求子句<clause1>，但出现<clause2>16-Bit fixup encountered in object file '<text>' 在对象文件<text>遇到16位修复486/487 instructions not enabled 不能用486/487指令Abstract methods must be virtual or dynamic 抽象方法必须为虚拟的或动态的Array type required 需要数组类型Assignment to FOR-Loop variable '<Name>' 给FOR循环变量<Name>赋值Bad argument type in variable type array constructor 在变量类型数组结构中不正确的参数类型Bad file format '<name>' 错误的文件格式<name>Bad file format: <Filename> 错误的文件格式<Filename>Bad global symbol definition: '<Name>' in object file '<Filename>' 对象文件'<Filename>'中错误的全局符号定义'<Name>'Bad unit format: <Filename> 错误的单元格式<Filename>BREAK or CONTINUE outside of loop BREAK或CONTINUE超出循环Cannot add or subtract relocatable symbols 不能增加或减少可重置的符号Cannot assign to a read-only property 不能指定只读属性Cannot BREAK, CONTINUE or EXIT out of a FINALLY clause 超出FINALLY 子句的范围，不能使用BREAK,CONTINUE或EXIT语句Cannot initialize local variables 不能初始化局部变量Cannot initialize multiple variables 不能初始化多个变量Cannot initialize thread local variables 不能初始化线程局部变量Cannot override a static method 不能覆盖静态方法Cannot read a write-only property 不能读取只写属性Case label outside of range of case expression CASE标号超出了CASE表达式的范围Circular unit reference to <Unitname> 对单元<Unitname>循环引用Class already has a default property 类已具有默认的属性Class does not have a default property 类没有默认的属性Class or object types only allowed in type section 在类型区段只允许有类或对象类型Class type required 需要类类型Close error on <Filename> 文件<Filename>关闭错误Compile terminated by user 用户中止编译Constant expected 要求常量Constant expression expected 要求常量表达式Constant expression violates subrange bounds 常量表达式超出子界范围Constant object cannot be passed as var parameter 常量对象不能作为变量参数传递Constant or type identifier expected 要求常量或类型标识符Constants cannot be used as open array arguments 常量不能用作打开数组参数Constructing instance of '<name>' containing abstract methods 构造的<name>实体包含抽象的方法Could not compile used unit '<Unitname>' 不能用单元<Unitname>编译Could not create output file <Filename> 不能建立输出文件<Filename> Could not load RLINK32.DLL 不能加载RLINK32.DLLData type too large: exceeds 2 GB 数据类型太大：超过2GBDeclaration of <Name> differs from previous declaration <Name>的说明与先前的说明不同Default property must be an array property 默认的属性必须为数组属性Default values must be of ordinal, pointer or small set type 默认的值必须为序数、指针或小集类型Destination cannot be assigned to 目标不能指定Destination is inaccessible 目标不能存取Dispid '<number>' already used by '<name>' DISPID标识号已被<name>使用Dispid clause only allowed in OLE automation section DISPID子句只能在OLE 自动区段中使用Division by zero 除数为零Duplicate case label CASE标号重复Duplicate tag value 重复的标志值Dynamic method or message handler not allowed here 这里不允许有动态方法或信息处理程序Dynamic methods and message handlers not allowed in OLE automation section在OLE自动区段不允许有动态方法或消息处理程序Element 0 inaccessible - use 'Length' or 'SetLength' 元素0不能存取-使用LENGTH或SETLENGTHError in numeric constant 数值常量错误EXCEPT or FINALLY expected 要求EXCEPT或FINALLYEXPORTS allowed only at global scope EXPORTS只允许在全局范围使用Expression has no value 表达式没有值Expression too complicated 表达式太复杂Field definition not allowed in OLE automation section 在OLE自动区段中不允许域定义Field definition not allowed after methods or properties 在方法或属性后不允许域定义Field or method identifier expected 要求域或方法标识符File not found: <Filename> 文件<Filename>没有找到File type not allowed here 这儿不允许文件类型For loop control variable must be simple local variable FOR循环控制变量必须为简单局部变量For loop control variable must have ordinal type FOR循环控制变量必须为序数类型FOR or WHILE loop executes zero times - deleted FOR或WHILE循环执行零次-删除FOR-Loop variable '<name>' cannot be passed as var parameter FOR循环变量<name>不能作为参数传递FOR-Loop variable '<Name>' may be undefined after loop 在循环后的FOR循环变量<NAME>是不确定的Function needs result type 函数需要结果类型Identifier redeclared: '<name>' 标识符<name>重复说明Illegal character in input file: '<char>' ($<hex>) 在输入文件中的非法字符'<char>'Illegal message method index 非法的消息方法指针Illegal reference to symbol '<Name>' in object file '<Filename>' 在对象文件<filename>中对符号<name>的非法引用Illegal type in OLE automation section: '<typename>' 在OLE自动区段中的非法类型<typename>Illegal type in Read/Readln statement 在Read/Readln语句中的非法类型Illegal type in Write/Writeln statement 在Write/Writeln语句中的非法类型Inaccessible value 不可存取的值Incompatible types: '<name>' and '<name>' 不兼容的类型<name>和<name> Incompatible types: <text> 不兼容的类型<text>Inline assembler stack overflow 内联汇编溢出Inline assembler syntax error 内联汇编语法错误Instance variable '<name>' inaccessible here 实体变量<name>在这里不能存取Integer constant or variable name expected 要求整形常量或变量名Integer constant too large 整型常量太大Internal error: <ErrorCode> 内部错误<errorcode>Invalid combination of opcode and operands 操作码与操作对象的无效组合Invalid compiler directive: '<Directive>' 无效的编译指令<DIRECTIVE> Invalid function result type 无效的函数值类型Invalid message parameter list 无效的消息参数列表Invalid register combination 无效的寄存器组合Invalid typecast 无效的TYPECASELabel '<Name>' is not declared in current procedure 在当前的过程中没有说明标号<NAME>Label already defined: '<Labelname>' 标号<LABELNAME>已经定义Label declaration not allowed in interface part 在界面部分不允许标号说明Label declared and referenced, but not set: '<label>' 标号被<label>说明及引用,但不能设置Label expected 要求标号Left side cannot be assigned to 左边不能赋值Line too long (more than 255 characters) 行太长(超出255个字符)Local class or object types not allowed 不允许局部的类或对象类型Local procedure/function '<Name>' assigned to procedure variable 局部过程/函数<NAME>赋给过程变量LOOP/JCXZ distance out of range LOOP/JCXZ距离超出范围Low bound exceeds high bound 下界超过上界Memory reference expected 要求内存引用Method '<name>' hides virtual method of base type '<name>' 方法<NAME>隐藏了基类型为<NAME>的虚拟方法Method '<name>' not found in base class 在基类中没有找到方法<NAME> Method identifier expected 要求方法标识符Missing ENDIF directive 缺少ENDIF指令Missing operator or semicolon 缺少操作符或分号Missing or invalid conditional symbol in '$<symbol>' directive 在$<symbol>指令中缺少或无效的条件符号Missing parameter type 缺少参数类型Necessary library helper function was eliminated by linker 必要的库帮助函数被连接程序删除No definition for abstract method '<name>' allowed 抽象方法<NAME>没有定义Not enough actual parameters 没有足够的实际参数Number of elements differs from declaration 元素数与说明不同Numeric overflow 数值溢出Object or class type required 需要对象或类类型Object type required 需要对象类型Only register calling convention allowed in OLE automation section 在OLE自动区段中只允许寄存器调用约定Operand size mismatch 运算对象大小匹配Operator not applicable to this operand type 运算符不使用于这一运算对象类型Order of fields in record constant differs from declaration 在记录常量中的域次序与说明不同Ordinal type required 需要序数类型Out of memory 内存溢出Overflow in conversion or arithmetic operation 转换或算术操作溢出Overriding automated virtual method '<name>' cannot specify a dispid 覆盖的自动虚拟方法<NAME>不能指定DISPIDPACKED not allowed here 这里不允许PACKEDPointer type required 需要指针类型Procedure cannot have a result type 过程不能有结果类型Procedure DISPOSE needs destructor 过程DISPOSE需要destructor Procedure FAIL only allowed in constructor 过程FAIL只允许在constructor方法中Procedure NEW needs constructor 过程NEW需要constructor方法PROCEDURE or FUNCTION expected 要求PROCEDURE或FUNCTION Procedure or function name expected 要求过程或函数名Program or unit '<name>' recursively uses itself 程序或单元递归Property '<name>' does not exist in base class 在基类中<NAME>属性不存在Published property '<name>' cannot be of type <type> Published属性<NAME>不能具有类型<type>Published Real48 property '<name>' must be Single, Double or Extended Published REAL属性<NAME>必须为Single, Double或ExtendedRe-raising an exception only allowed in exception handler 在意外处理中只允许重新引起意外处理Read error on <Filename> 文件<FILENAME>读出错Record, object or class type required 需要记录,对象或类类型Redeclaration of '<name>' hides a member in the base class <NAME>的重新说明隐藏了基类中一个元素Redeclaration of property not allowed in OLE automation section 在OLE自动区段中不允许属性重复说明Return value of function '<Functionname>' might be undefined 函数<Functionname>的返回值可能没有定义Seek error on <Filename> 在<FILENAME>中搜索错误Segment/Offset pairs not supported in Borland 32-bit Pascal 在Borland 32位的PASCAL中不支持Segment/Offset对Sets may have at most 256 elements 集至少有256个元素Size of published set '<name>' is >32 bits published集<NAME>的大小大于32字节Slice standard function only allowed as open array argument Slice标准函数只允许作为打开数组参数Statement expected, but expression of type '<type>' found 要求语句,但出现类型<TYPE>的表达式Statements not allowed in interface part 在界面中不允许的语句String constant too long 字符串常量太长String constant truncated to fit STRING[<number>] 字符串常量截取到适合STRING[<number>]Strings may have at most 255 elements 字符串至少255个元素Structure field identifier expected 要求结构域标识符Syntax error in real number 实数语法错误System unit out of date or corrupted: missing '<name>' 系统单元超出日期或损坏:缺少<NAME>Text after final 'END. 编译器忽略END.后的文本This form of method call only allowed for class methods 该方法的窗体只允许类方法This form of method call only allowed in methods of derived types 该方法的窗体只允许在导出类型的方法中This type cannot be initialized 这一类型不能初始化Thread local variables cannot be ABSOLUTE 线程局部变量不能是ABSOLUTEThread local variables cannot be local to a function or procedure 线程局部变量对函数不能是局部的Too many actual parameters 太多的实际参数Too many conditional symbols 太多的条件符号Type '<name>' has no type info 类型<NAME>没有类型信息Type '<Name>' is not yet completely defined 类型<NAME>至今没有定义Type '<name>' must be a class to have a PUBLISHED section 类型<NAME>必须是在PUBLISHED区段中的类Type '<name>' must be a class to have OLE automation 类型<NAME>必须是具有OLE自动的类Type '<name>' needs finalization - not allowed in file type 类型<NAME>需要初始化-不允许在文件类型中Type '<name>' needs finalization - not allowed in variant record 类型<NAME>需要初始化-不允许在变体记录Type expected 要求TYPEType not allowed in OLE Automation call 在OLE自动调用中不允许的类型Type of expression must be BOOLEAN 表达式的类型必须为BOOLEAN型Type of expression must be INTEGER 表达式的类型必须为INTEGER型TYPEINFO standard function expects a type identifier TYPEINFO标准函数要求类型标识符TYPEOF can only be applied to object types with a VMT TYPEOF只能用于具有VMT的对象类型Types of actual and formal var parameters must be identical 形参与实参必须一致Undeclared identifier: '<name>' 未说明的标识符<NAME>Unexpected end of file in comment started on line <Number> 以行<Number>开始的注释中出现不应有的文件结束Unit <Unit1> was compiled with a different version of <Unit2> 单元<UNIT1>与不同版本的<UNIT2>编译Unit name mismatch: '<Unitname>' 单元名不匹配<UNITNAME>Unknown directive: '<Directive>' 未知的指令<DIRECTIVE>Unnamed arguments must precede named arguments in OLE Automation call 在OLE自动调用中未命名的参数必须在命名的参数前Unsatisfied forward or external declaration: '<Procedurename>' 不满足的向前或外部说明<Procedurename>Unterminated string 未结束的字符串Value assigned to '<Name>' never used 赋给<NAME>的值从未使用过Variable '<name>' inaccessible here due to optimization 由于优化,变量名<NAME>在这里不能存取Variable '<name>' is declared but never used in '<name>' 变量名<NAME>已说明,但不曾使用Variable '<Name>' might not have been initialized 变量名<NAME>可能没有初始化Variable required 需要变量Virtual constructors are not allowed 不允许虚拟的constructors方法Write error on <Filename> 文件<Filename>写错误Wrong or corrupted version of RLINK32.DLL RLINK32.DLL版本错误或不能用。

. Fortran 运行中给出的系统错误及解决方法以下均为linker tools errors and warningsLinker Tools Error LNK1000unknown error; consult documentation for technical support options Note the circumstances of the error, try to isolate the problem and create a reproducible test case, then contact technical support.Linker Tools Error LNK1101incorrect MSPDBxx.DLL version; recheck installation of this product The version of MSPDBxx.DLL available on your system does not match the version required by this tool.Linker Tools Error LNK1102out of memoryThere was not enough memory for the tool to run. Probably the paging file exceeded available disk space. If a shortage of disk space is not the cause, note the circumstances of the error, try to isolate the problem and create a reproducible test case, then request technical support.Linker Tools Error LNK1103debugging information corrupt; recompile moduleProbably the compilation was terminated before a valid object file was created.Recompile the given object file. If recompiling does not correct the problem,note the circumstances of the error, try to isolate the problem and create a reproducible test case, then consult technical support.Linker Tools Error LNK1104cannot open file "filename"The tool could not open the given file. One of the following may be a cause:l There was not enough disk space.l The file does not exist.l The filename or its path was incorrectly specified.l The specified drive is invalid.l The file does not have the appropriate permissions.l The path for filename expands to more than 260 characters.l If the given file is named LNKn, which is a filename generated by the linker for a temporary file, then the directory specified in the TMP environment variable may not exist, or more than one directory is specified for the TMP environment variable. (Only one directory path should be specified for the TMP environment variable.)l If the error occurs on the executable filename, an earlier version of the executable may still be running. You will need to terminate the executable before linking it. In Windows NT (including Windows 2000) or Windows 95,you can use the utility PVIEW to look for and kill instances of the application.l If the error message occurs for a library name, and you recently ported the .MAK file from a previous Microsoft Visual C++ developmentLinker Tools Messages Page 3 of 37environment, the library may no longer be valid. Ensure that the library still exists in this circumstance.l If the error message occurs for a library name such as CONSOLE.LIB, and you included object modules from an older Fortran developmentenvironment such as Microsoft Fortran PowerStation, recompile all source files with Visual Fortran to create new object files and libraries.Linker Tools Error LNK1105cannot close file "filename"The tool could not close the given file. Possibly there was insufficient disk space available.Linker Tools Error LNK1106invalid file or disk full: cannot seek to locationThe tool could not read or write to location in a memory-mapped file:l Your disk may be too full to complete the link. Free up some space and try the link again.l The error may be a result of trying to link over a network. Some networks do not fully support the memory-mapped files used by the linker. Try linking on your local disk to see if that fixes the problem.l There may be a bad block on your disk. Although the operating system and disk hardware should have detected such an error, you may want to run a disk checking program.Linker Tools Error LNK1107invalid or corrupt file: cannot read at locationThe tool could not read the file. Recreate the file.Linker Tools Error LNK1108cannot write file at locationThe tool could not write to the file. One of the following may be a cause:l There was not enough disk space to create the file.l The drive being written to was not available, possibly due to a network problem.Linker Tools Error LNK1109cannot remove file "filename"LIB could not delete the given file. Before LIB writes the new version of a library, it removes the existing library file. One of the following may be a cause:l The given file does not have the appropriate permissions.l The drive containing the file was not available, possibly due to a network problem.Linker Tools Error LNK1110Linker Tools Messages Page 4 of 37cannot rename file "filename"LIB could not rename the given file. When LIB builds a new version of a library, it creates atemporary file, then renames the file. One of the following may be a cause:l The given file does not have the appropriate permissions.l The drive containing the file was not available, possibly due to a network problem.Linker Tools Error LNK1111invalid /BASE argument "argument"The /BASE option was incorrectly specified. Either no argument was specified or argument is not a number.Linker Tools Error LNK1112module machine type "type1" conflicts with target machine type "type2"The object files specified as input were compiled for different machine types.Linker Tools Error LNK1113invalid machine typeThe machine type specified in the object header is not valid. Probably the file is corrupt. Rebuild the object. See Corrupt Object File for more information.Linker Tools Error LNK1115/MACHINE option requiredLINK or LIB cannot determine the machine type for objects that are provided entirely from libraries. Either specify the /MACHINE option with the appropriate machine type or specify at least one object file in the input.Linker Tools Error LNK1117syntax error in option "option"The given option was not correctly specified.Linker Tools Error LNK1118syntax error in keyword statementThe given module-definition statement was not correctly specified.Linker Tools Error LNK1119invalid ordinal number "argument"The argument following the at sign (@) in an ordinal specification was not avalid number. An ordinal number is an optional argument in either an /EXPORToption in a LINK or LIB command or an EXPORTS statement in a moduledefinitionfile. It is an index into the exports table. The number must be aninteger in the range 1-65535.Linker Tools Error LNK1120number unresolved externalsLinker Tools Messages Page 5 of 37Error LNK1120 gives you a count (number) of unresolved externals for this link.The conditions that cause unresolved externals are described with errorLNK2001 (see Linker Errors LNK2001 to LNK2014), which precedes this error message (once for each unresolved external).Linker Tools Error LNK1121duplicate ordinal number "number"The given ordinal number was specified more than once in either an /EXPORT option in a LINK or LIB command or an EXPORTS statement in a moduledefinition file. Ordinal numbers must be unique integers in the range 1-65535.Linker Tools Error LNK1123failure during conversion to COFF: file invalid or corruptThe object or resource could not be converted to COFF. This tool requires the format of all input files to be COFF. If an input file is not COFF, the tool runs a conversion tool, either CVTOMF (to convert 32-bit OMF objects) or CVTRES (to convert resource files). This error is preceded by errors or warnings from the conversion tool. One of the following may be a cause:l The file is corrupt.l The file is not a valid file type. An example of an invalid type is a 16-bit OMF object.Linker Tools Error LNK1127library is corruptThe library file is corrupt. Rebuild the library.Linker Tools Error LNK1129cannot find resolution for weak extern symbolThe given weak external symbol does not have a default resolution. Probablythe symbol table is corrupt. Rebuild the object file. See Corrupt Object File for more information.Linker Tools Error LNK1130Linker miscalc (base relocations off by number)There was not enough space in the image to write base relocations.Linker Tools Error LNK1131no library file specifiedThe LIB /EXTRACT command required a library as input, but a library filenamewas not specified.Linker Tools Error LNK1132invalid format for MS-DOS stub file "filename"The filename specified with the /STUB option was not a valid real-mode MS-DOS executable (.EXE) file.Linker Tools Messages Page 6 of 37Linker Tools Error LNK1136invalid or corrupt fileThe input file either has a corrupt header or is zero size or abnormally small.See Corrupt Object File for more information.Linker Tools Error LNK1137invalid argument specified with /SECTIONEither the name or the attributes argument to the /SECTION option is specified incorrectly.Linker Tools Error LNK1140too many modules for program database; relink with /PDB:NONEThe project contains more than 4096 modules. One of the following is asolution:l Relink using /PDB:NONE.l Compile some modules without debugging information.l Reduce the number of modules.Linker Tools Error LNK1141failure during build of exports fileLINK could not build the exports (.EXP) file. Causes of this error include system problems such as insufficient memory and syntax errors in options or moduledefinition statements. This error is preceded by another error that givesadditional information.Linker Tools Error LNK1143invalid or corrupt file: no symbol for COMDAT section numberThe object file is corrupt. Rebuild the file. See Corrupt Object File for more information.Linker Tools Error LNK1144error with LINK_REPRO var; cannot open "filename"The linker could not create filename. One of the following may be a cause:l Check that you've set your LINK_REPRO environment variable to anexisting directory and not the current directory.l Make sure there are no read-only files in the directory.l Make sure none of the files in the LINK_REPRO directory are open byanother process, because the linker needs to write to them.Linker Tools Error LNK1145/MERGE created circular link for section "section"You attempted to merge a section into itself. Check the /MERGE options.Linker Tools Error LNK1146Linker Tools Messages Page 7 of 37no argument specified with option "option"The given option requires an argument.Linker Tools Error LNK1147invalid number specified with option "option"The argument to the given option was specified incorrectly.Linker Tools Error LNK1148failure during conversion to COFF: cannot copy temp file filenameEDITBIN could not convert the input file to COFF. When EDITBIN converts a file,it creates a temporary file, then copies the file. One of the following may be a cause: l The given file does not have the appropriate permissions.l There was not enough disk space to create the file.l The drive being written to was not available, possibly due to a network problem.Linker Tools Error LNK1149output filename matches input filename "filename"The output filename specified with the /OUT or /IMPLIB option was the same asan input file.Return to Main Linker Error PageLinker Errors LNK1152 to LNK1189Linker Tools Error LNK1152cannot resolve one or more undecorated symbolsThis error is preceded by one warning LNK4022 for each undecorated symbolthat could not be resolved and by at least two warnings LNK4006 for the duplicate symbols found for the undecorated symbol.Linker Tools Error LNK1153/VXD command-line option requiredYou attempted to build a virtual device driver without the /VXD option. Relinkwith the /VXD option.Linker Tools Error LNK1154specified import library filename matches exports file "filename"The filename specified with LINK /IMPORT or with LIB /DEF /OUT conflicted with the filename given by LINK or LIB to the exports file, which is formed from the base name of the main output file and the extension .EXP.Linker Tools Error LNK1155special symbol "symbol" already definedLinker Tools Messages Page 8 of 37The given symbol is reserved for use by LINK.Linker Tools Error LNK1156.sbss section not supportedAn object file contained an .sbss section.Linker Tools Error LNK1157fixup overflow; offset of target symbol "symbol" greater than +-8MBThe VXD is too large, or the sections are not arranged properly.Linker Tools Error LNK1158cannot run "filename"The given executable file called by LINK is not in the directory that contains LINK and is not in a directory specified in the PATH environment variable. Linker Tools Error LNK1159no output file specifiedNo name was specified for the main output file (executable file or DLL). LINK derives the default name of the output file from the base name of the first object file. If no object files are specified, and if the /OUT option is not used, this error occurs.Linker Tools Error LNK1160library with zero objects not allowedAn attempt was made to remove an object from a library that contained only that object. The object was not removed.Linker Tools Error LNK1161invalid export specificationEither the /EXPORT option or the EXPORTS module-definition statement incorrectly specified an export. A possible cause is a typing error.Linker Tools Error LNK1162expected aux symbol for comdat section numberThe linker expected to find an auxiliary symbol table for the indicated COMDAT but could not. The object file is probably corrupt. See Corrupt Object File for more information.Linker Tools Error LNK1163invalid selection for comdat section numberThe byte in the object file indicating the type of COMDAT section is invalid. The object file is probably corrupt. See Corrupt Object File for more information. Linker Tools Error LNK1164section section alignment (number) greater than /ALIGN valueThe alignment size for the given section in the object file exceeds the value specified with the /ALIGN option. The /ALIGN value must be a power of 2 and Linker Tools Messages Page 9 of 37must equal or exceed the section alignment given in the object file. Either recompile with a smaller section alignment or increase the /ALIGN value. Linker Tools Error LNK1165link failed because of fixup errorsThe build failed due to fixup errors. The /FORCE or /FORCE:UNRESOLVED option overrides this error.Linker Tools Error LNK1166cannot adjust code at offset=offset, va=valueLINK was unable to pad the code as required. Certain instructions are not allowed to cross page boundaries on some processors. LINK attempts to add pads to correct this situation. In this case, LINK could not work around the problem.Linker Tools Error LNK1167file contains relocs but header has no machine typeA converted COFF object did not have a machine type specified in its header. One cause of this error is omitting a machine type when converting a .RES file in a separate step before linking.Linker Tools Error LNK1168cannot open filename for writingThe given file does not have write permission.Linker Tools Error LNK1169one or more multiply defined symbols foundThe build failed due to multiple definitions of one or more symbols. This error is preceded by error LNK2005. The /FORCE or /FORCE:MULTIPLE option overrides this error.Linker Tools Error LNK1170line in command file contains limit or more charactersThe length of a line in a command file must be less than the given limit.Linker Tools Error LNK1171unable to load filenameThe given DLL was unavailable. The possible locations for the DLL are the current directory, the system directory, the Windows directory, and the directories specified in the PATH environment variable.Linker Tools Error LNK1172more than one object with the name "object" found; rename object(s) or relink /PDB:NONEA library contained two or more objects with the same name. Do one of the following:Linker Tools Messages Page 10 of 37l Rename the objects using unique names and rebuild the library.l Link using the /PDB:NONE option.Linker Tools Error LNK1173unable to find entrypoint function in filenameThe given function does not exist in the given DLL.Linker Tools Error LNK1174unable to /REBASE filename; not a valid Win32 imageThe format of the given file was invalid.Linker Tools Error LNK1175failed to /REBASE filenameThe rebase operation failed on the given file.Linker Tools Error LNK1177TOC size limit exceededThe linker was unable to create a TOC (Table of Contents) in your image file. The limit is 2048 entries in the TOC.Linker Tools Error LNK1178missing MODEND record; file is invalid or corruptThe linker tool tried to convert an OMF object module to COFF format but could not find an expected MODEND (module end) record in the OMF object. The OMF object module is corrupt and needs to be recreated or recopied. See Corrupt Object File for more information.Linker Tools Error LNK1179invalid or corrupt file: duplicate comdat comdatAn object module contained two or more COMDATs with the same name. One possible cause is if you use the Visual C++ /H option with the Visual C++ /Gy option. The /H option limits the length of external names, and the /Gy option packages functions in COMDATs.Linker Tools Error LNK1180insufficient disk space to complete linkThe linker tool was unable to complete a file operation since the operating system reported that the disk is full. Free up space on your local and network drives (if you are writing files there).Linker Tools Error LNK1181cannot open input file "filename"The linker tool could not find "filename" because it does not exist or the path was not found.Linker Tools Error LNK1182Linker Tools Messages Page 11 of 37cannot have more than 64K exportsYou have reached the linker's limit of 65,536 exports.Linker Tools Error LNK1183invalid or corrupt file: extended relocation count number less than 65535The COFF object file is corrupt since it contains an extended relocation count that is less than 0xFFFF. See Corrupt Object File for more information.Linker Tools Error LNK1184invalid section name "section" specified in option or directive "option"You gave the linker an invalid section name in option. Invalid section names contain "$" or blanks.Linker Tools Error LNK1185invalid section name "section" specifiedYou gave the linker an invalid section name in a .DEF file. Invalid section names contain "$" or blanks.Linker Tools Error LNK1186invalid or corrupt COFF object; reloc to undefined static symbol "symbol"Your COFF object module is corrupt since it contains a relocation entry for an undefined static symbol. See Corrupt Object File for more information.Linker Tools Error LNK1187Corrupt object - unmatched name relocation; ignoredYour object file contains bad relocation information. Recopy or recreate the object file. See Corrupt Object File for more information.Linker Tools Error LNK1188BADFIXUPSECTION:: invalid fixup target "symbol"; possible zero length section This message is issued only for VxD links when the target of a relocation does not have a section. With LINK386 (an older version), an OMF GROUP record (generated by a MASM GROUP directive) may have been used to combine the zero length section with another non-zero length section. COFF format does not support the GROUP directive and zero-length sections. When LINK automatically converts this type of OMF objects to COFF, this error may occur.Linker Tools Error LNK1189LIBTOOMANYMEMBERS:: library limit of number objects exceededThe limit of 65535 objects or members in a library has been exceeded.Return to Main Linker Error PageLinker Errors LNK1190 to LNK1581Linker Tools Error LNK1190Linker Tools Messages Page 12 of 37invalid fixup found, type typeThe object file has become corrupted. Recompile.Linker Tools Error LNK1194cannot delay-load dll name due to import of data symbol symbol name; relink without /DELAYLOAD:dll nameYou cannot delay load a DLL if data is imported from it.Linker Tools Error LNK1195target machine "machine" requires "option"Add the required option.Linker Tools Error LNK1196invalid or corrupt import object: unknown versionThe import library has become corrupted. Rebuild the library.Linker Tools Error LNK1197invalid or corrupt import object: unknown typeThe import library has become corrupted. Rebuild the library.Linker Tools Error LNK1198invalid or corrupt import object: unknown name typeThe import library has become corrupted. Rebuild the library.Linker Tools Error LNK1199invalid or corrupt import object: non-zero reserved fieldsThe import library has become corrupted. Rebuild the library.Linker Tools Error LNK1200error reading program database "filename"The given program database (PDB) could not be read, probably because it is corrupted. If filename is the PDB for an object file, recompile the object file; use the /debug:full and /pdbfile options. If filename is the PDB for the main outputfile and this error occurred during an incremental link, delete the PDB and relink.Linker Tools Error LNK1201error writing to program database "filename"; check for insufficient disk space LINK could not write to the program database (PDB) for the output file. One of the following may be a cause:l The file is corrupted. Delete filename and relink.l There was not enough disk space to write to the file.l The drive being written to was not available, possibly due to a network problem.Linker Tools Error LNK1202Linker Tools Messages Page 13 of 37"filename" missing debugging information for referencing moduleThe given program database (PDB) for an object file was invalid. Recompile the object file; use CL's /Zi option.Linker Tools Error LNK1203"filename" missing current debugging information for referencing module The given program database (PDB) for an object file was invalid. Recompile the object file; use CL's /Zi option.Linker Tools Error LNK1204"filename" compiled /Yc /Yu /Z7; cannot create PDB; recompile with /Zi Multilayered program databases (PDBs) are not supported in combination with old-style debugging information. Recompile using CL's /Zi option.Linker Tools Error LNK1206cannot overwrite Visual C++ 1.0 PDB "filename"; delete and rebuildThis version of LINK cannot write to an existing program database (PDB) created using older versions of the visual development environment. Delete filename and rebuild.Linker Tools Error LNK1207incompatible PDB format in "filename"; delete and rebuildThis version of LINK cannot write to the existing program database (PDB). Delete filename and rebuild.Linker Tools Error LNK1209program database "filename" differs from previous link; relink or rebuildThe given program database (PDB) is invalid and possibly corrupt. Relink. If filename is also the PDB for an object file, recompile to recreate the PDB. Linker Tools Error LNK1210insufficient memory for incremental link; relink with /INCREMENTAL:NO There was not enough virtual memory available for LINK to create the incremental status (.ILK) file.Linker Tools Error LNK1211precompiled type information not found; "filename" not linked or overwritten The given object file, compiled with /Yc, either was not specified in the LINK command or was overwritten.Linker Tools Error LNK1212error opening program database; file is in useThe PDB is already in use by another application.Linker Tools Error LNK1213unexpected import object encounteredThe import library has become corrupted. Rebuild the library.Linker Tools Messages Page 14 of 37Linker Tools Error LNK1221a subsystem can't be inferred and must be definedThe linker does not have enough information to infer which subsystem you will target your application. To fix this error, use the /SUBSYSTEM option.Linker Tools Error LNK1561entry point must be definedThe symbol specified by the /ENTRY option is not defined.Linker Tools Error LNK1581corrupted object or old compiler (bad Pcode entry point)Your object file contained a bad entry point. The object file is probably corrupt.。

FORTRAN常见错误41 Insufficient virtual memory 虚拟内存不足70 Integer overflow 整数溢出错误71 Integer divide by zero 整数除0错误72 Floating overflow 浮点数溢出错误73 Floating divide by zero 浮点数除0错误74 Floating underflow 浮点数下溢错误75 Floating point exception 浮点数异常错误77 Subscript out of range 数组定义超出边界95 Floating-point conversion failed 浮点数格式转换失败146 Null pointer error 空指针错误147 Stack overflow 堆栈溢出148 String length error 字符串长度超出允许范围149 Substring error 数组下标超出允许范围150 Range error 整数值超出允许范围151 Allocatable array is already allocated 数组重复定义161 Program Exception - array bounds exceeded 引用数组下标超出允许范围162 Program Exception - denormal floating-point operand 非法浮点数操作符163 Program Exception - floating stack check 浮点数堆栈检查164 Program Exception - integer divide by zero 整数除0错误165 Program Exception - integer overflow 整数溢出166 Program Exception - privileged instruction 非法执行特权指令168 Program Exception - illegal instruction 非法指令170 Program Exception - stack overflow 堆栈溢出540 Array or substring subscript expression out of range 数组下标低下数组定义下界或高于数组定义上界541 CHARACTER substring expression out of range 字符串非法表示542 Label not found in assigned GOTO list 不属于GOTO语句引用的标号543 INTEGER arithmetic overflow 整数运算结果出现溢出544 INTEGER overflow on input 输入的整数值超出允许范围545 Invalid INTEGER 非法整数值546 REAL indefinite (uninitialized or previous error) 产生非法实数547 Invalid REAL 非法实数548 REAL math overflow 实数值溢出549 No matching CASE found for SELECT CASE select case语句中缺少case项550 INTEGER assignment overflow 整数定义超出允许范围556 A edit descriptor expected for CHARACTER 字符型数据的格式化输入和输出需要A编辑符557 E, F, D, or G edit descriptor expected for REAL 实数型数据的格式化输入和输出需要E,F,D,G编辑符558 I edit descriptor expected for INTEGER 整数型数据的格式化输入和输出需要I编辑符559 L edit descriptor expected for LOGICAL 逻辑型数据的格式化输入和输出需要L编辑符568 Multiple radix specifiers 输入或输出语句重复说明582 Array already allocated 数组已分配583 Array size zero or negative 数组大小为0或负数585 Array not allocated 没有被分配的数组610 Invalid argument 非法参数616 Invalid number in input 输入非法数字617 Invalid string in input 输入非法字符串618 Comma missing in COMPLEX input 输入的多个表达式之间缺少逗号619 T or F expected in LOGICAL read 输入的逻辑值必须是T或F622 Illegal character in hexadecimal input 输入非法的十六进制数637 Integer expected in format 格式语句中要求的整数638 Initial left parenthesis expected in format 格式语句中多余的左括号639 Positive integer expected in format 格式语句中要求用正整数641 Integer expected preceding H, X, or P edit descriptor 在H、X、P编辑符前要求用整数644 '.' expected in format 在D、E、F、G编辑符中w和d域之间用'.'分隔645 Unexpected end of format 格式语句没有结束646 Unexpected character in format 格式语句中的非法字符647 M field exceeds W field in I edit descriptor 在I编辑符中M域的值大于W域的值648 Integer out of range in format 格式语句中的整数值超出允许范围650 Separator expected in format 格式语句中需要分隔符663 Out of range: substring starting position 'pos' is less than 1 子字符串的起始位置小于1664 Out of range: substring ending position 'pos' is greater than string length 'len' 子字符串的终止位置大于字符串长度672 Out of memory 内存不足718 Cannot allocate temporary array -- out of memory 由于内存不足不能分配临时数组727 Cannot ALLOCATE allocatable array -- out of memory 由于内存不足不能分配数组729 DEALLOCATE failure: ALLOCATABLE array is not ALLOCATED 释放没有被分配的数组。

fortran安装、调试、运行过程中的【可能错误及其原因】-中英对照楼主鲍炜炜2011-04-18 14:37（欢迎加入气象QQ讨论群：149280902，点击即可加入）安装1．关于Fortran编译器的安装和配置？在安装FEPG之前一般要先安装好Powerstation Fortran 4.0编译器，并设置好Fortran编译器的path、lib 和include路径。

如果你的Powerstation Fortran 4.0编译器安装在目录C:\MSDEV下，设置如下：·在WIN 2000/XP下的设置:a.鼠标移到我的电脑图标，单击右键，然后点击属性；b.点击高级属性；c.点击环境变量，进行系统变量设置；系统变量如下图：d. 如果图上的include、lib、path几个变量没有，请点击新建；如有，点击编辑；按下面变量值进行修改：变量：path值：c:\MSDEV\bin; %path%变量：lib 值：c:\MSDEV\lib;%lib%变量：include值：c:\MSDEV\include;%include%注意：如果path、lib和include变量中有相应新增加的内容，可不增加。

如果编译器装在其它目录，则把C:\MSDEV换为该目录名。

实际上，在安装Powerstation Fortran 4.0时，会出现一个对话框，询问是否增加环境变量，如果选是，这些变量就已经配置好了。

安装fepg，需要用户有管理员权限。

2．运行FEPG命令生成Fortran源程序时，出现fl32不是内部命令也不是外部命令的错误(或fl32 is not internal command)？没配置好Fortran编译器的path路径。

按照上面第1个问题中的解答配置好path路径。

3. 运行FEPG命令生成Fortran源程序时，有些fortran源程序没连接成可执行程序，出现不能发现fepg.lib 库文件的错误？安装FEPG之前，没安装和配置好Fortran编译器所致。

fortran常见运行错误信息Insufficient virtual memory 虚拟内存不足70 Integer overflow 整数溢出错误71 Integer divide by zero 整数除0错误72 Floating overflow 浮点数溢出错误73 Floating divide by zero 浮点数除0错误74 Floating underflow 浮点数下溢错误75 Floating point exception 浮点数异常错误77 Subscript out of range 数组定义超出边界95 Floating-point conversion failed 浮点数格式转换失败146 Null pointer error 空指针错误147 Stack overflow 堆栈溢出148 String length error 字符串长度超出允许范围149 Substring error 数组下标超出允许范围150 Range error 整数值超出允许范围151 Allocatable array is already allocated 数组重复定义161 Program Exception - array bounds exceeded 引用数组下标超出允许范围162 Program Exception - denormal floating-point operand 非法浮点数操作符163 Program Exception - floating stack check 浮点数堆栈检查164 Program Exception - integer divide by zero 整数除0错误165 Program Exception - integer overflow 整数溢出166 Program Exception - privileged instruction 非法执行特权指令168 Program Exception - illegal instruction 非法指令170 Program Exception - stack overflow 堆栈溢出540 Array or substring subscript expression out of range 数组下标低下数组定义下界或高于数组定义上界541 CHARACTER substring expression out of range 字符串非法表示542 Label not found in assigned GOTO list 不属于GOTO语句引用的标号543 INTEGER arithmetic overflow 整数运算结果出现溢出544 INTEGER overflow on input 输入的整数值超出允许范围545 Invalid INTEGER 非法整数值546 REAL indefinite (uninitialized or previous error) 产生非法实数547 Invalid REAL 非法实数548 REAL math overflow 实数值溢出549 No matching CASE found for SELECT CASE select case语句中缺少case项550 INTEGER assignment overflow 整数定义超出允许范围556 A edit descriptor expected for CHARACTER 字符型数据的格式化输入和输出需要A编辑符557 E, F, D, or G edit descriptor expected for REAL 实数型数据的格式化输入和输出需要E,F,D,G编辑符558 I edit descriptor expected for INTEGER 整数型数据的格式化输入和输出需要I编辑符559 L edit descriptor expected for LOGICAL 逻辑型数据的格式化输入和输出需要L编辑符568 Multiple radix specifiers 输入或输出语句重复说明582 Array already allocated 数组已分配583 Array size zero or negative 数组大小为0或负数585 Array not allocated 没有被分配的数组610 Invalid argument 非法参数616 Invalid number in input 输入非法数字617 Invalid string in input 输入非法字符串618 Comma missing in COMPLEX input 输入的多个表达式之间缺少逗号619 T or F expected in LOGICAL read 输入的逻辑值必须是T或F622 Illegal character in hexadecimal input 输入非法的十六进制数637 Integer expected in format 格式语句中要求的整数638 Initial left parenthesis expected in format 格式语句中多余的左括号639 Positive integer expected in format 格式语句中要求用正整数641 Integer expected preceding H, X, or P edit descriptor 在H、X、P编辑符前要求用整数644 '.' expected in format 在D、E、F、G编辑符中w和d域之间用'.'分隔645 Unexpected end of format 格式语句没有结束646 Unexpected character in format 格式语句中的非法字符647 M field exceeds W field in I edit descriptor 在I编辑符中M域的值大于W域的值648 Integer out of range in format 格式语句中的整数值超出允许范围650 Separator expected in format 格式语句中需要分隔符663 Out of range: substring starting position 'pos' is less than 1 子字符串的起始位置小于1664 Out of range: substring ending position 'pos' is greater than string length 'len' 子字符串的终止位置大于字符串长度672 Out of memory 内存不足718 Cannot allocate temporary array -- out of memory 由于内存不足不能分配临时数组727 Cannot ALLOCATE allocatable array -- out of memory 由于内存不足不能分配数组729 DEALLOCATE failure: ALLOCATABLE array is not ALLOCATED 释放没有被分配的数组。