英文版销售合同完整版

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

关于英文销售合同范本6篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into by and between Seller and Buyer on this day___________(date).1. Sale of Goods:Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods:- Description of goods- Quantity- Price2. Payment Terms:Buyer shall pay Seller the total amount of $_____________ for the goods purchased. Payment shall be made in full within ______ days of the date of this Contract. Payment shall be made in the form of [cash, check, wire transfer, etc.].3. Delivery:Seller shall deliver the goods to Buyer at the following address:- Delivery addressDelivery shall be made on or before ____________(date). Time is of the essence in this Contract.4. Inspection:Buyer shall have the right to inspect the goods upon delivery. Buyer must notify Seller of any defects or nonconformities within _______ days of delivery.5. Warranties:Seller warrants that the goods:- Are free from defects in material and workmanship- Conform to the specifications set forth in this Contract- Are fit for the particular purpose for which they are intendedSeller’s liability under this warranty shall be limited to repairing or replacing the defective goods.6. Indemnification:Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, liabilities, and expenses arising out of or related to the goods sold under this Contract, including but not limited to claims of infringement of intellectual property rights.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of the State of___________.8. Entire Agreement:This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller____________________________Buyer____________________________This document reflects the entire agreement between Seller and Buyer for the sale of goods in question. It is recommended that both parties review this Contract carefully and seek legal advice if necessary before signing.篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller], located at [Address] (“Seller”) and [Buyer], located at [Address] (“Buyer”).1. Sale of GoodsSeller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the “Goods”): [Description of Goods] in the quantity and price set forth in Exhibit A attached hereto.2. DeliverySeller shall deliver the Goods to Buyer at the location specified by Buyer on [Delivery Date]. Buyer shall be responsible for all shipping costs.3. PaymentBuyer shall pay Seller the total purchase price for the Goods in the amount of [Total Amount], payable as follows: [Payment Terms]. Payment shall be made in [Currency] by [Payment Method].4. InspectionBuyer shall have [Number] days from the date of delivery to inspect the Goods. If Buyer finds any defects or nonconformities, Buyer shall notify Seller in writing within [Number] days of the delivery date. Seller shall have the option to refund Buyer or replace the defective Goods.5. Representations and WarrantiesSeller represents and warrants that the Goods are free from defects in materials and workmanship and are fit for the purpose intended.6. Limitation of LiabilityIn no event shall Seller be liable to Buyer for any indirect, special, incidental, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between Seller and Buyer and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _____________________________Buyer: ______________________________Exhibit A: Description of Goods[Insert Description of Goods][Signatures]This Sales Contract is hereby executed by the parties as of the date first above written.Seller: _____________________________Buyer: ______________________________I. General Terms and ConditionsThis Sales Contract (the "Agreement") is entered into by and between [SELLER NAME] ("Seller") and [BUYER NAME] ("Buyer") on [SIGNING DATE] (the "Effective Date"). Seller and Buyer agree as follows:1. Sale, Quantity, and Description of Goods. Seller agrees to sell and Buyer agrees to purchase the goods (the "Goods") in the quantities and descriptions set forth in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be as set forth in Exhibit A and shall be paid to Seller in accordance with the payment terms set forth in Exhibit B.3. Delivery of Goods. The Goods shall be delivered by Seller to Buyer at the location specified by Buyer on or before the delivery date set forth in Exhibit A.4. Title and Risk of Loss. Title to and risk of loss for the Goods shall pass to Buyer upon delivery of the Goods by Seller to the carrier at the point of shipment.5. Inspection and Acceptance. Buyer shall have [NUMBER] days from the date of delivery of the Goods to inspect the Goods and to notify Seller of any nonconformities. Buyer's failure to notify Seller of any nonconformities within such period shall constitute acceptance of the Goods.6. Warranties. Seller hereby warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to replacement of the nonconforming Goods.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any special, consequential, or incidental damages arising out of or relating to this Agreement.8. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of [STATE].9. Entire Agreement. This Agreement constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]Exhibit A: Description of Goods[DESCRIPTION OF GOODS]Exhibit B: Payment Terms[PAYMENT TERMS]II. Specific Provisions1. Termination. This Agreement may be terminated by either party upon [NUMBER] days written notice for any reason.2. Force Majeure. Neither party shall be liable for any failure or delay in performing its obligations under this Agreement to the extent such failure or delay is caused by circumstances beyond its reasonable control.3. Confidentiality. Seller and Buyer shall keep confidential all information received from the other party in connection with this Agreement and shall not disclose such information to any third party without the other party's prior written consent.4. Assignment. Neither party may assign its rights or obligations under this Agreement without the other party's prior written consent.5. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.6. Modification. This Agreement may be modified only by a written instrument signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]篇3Sales ContractThis sales contract (the "Contract") is made and entered into on [date], by and between [Seller name], having its principal place of business at [Seller address] and [Buyer name], having its principal place of business at [Buyer address].1. Goods Sold: The Seller agrees to sell and deliver to the Buyer the following goods (the "Goods"):- [Description of goods]- Quantity: [Number of units]- Price: [Price per unit]2. Payment Terms: The Buyer agrees to pay the Seller the total amount of [total amount] for the Goods. Payment shall be made in [currency] within [number] days of the delivery of the Goods.3. Delivery: The Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery address]. Delivery shall be made on or before [delivery date].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Goods are not in conformity with the Contract, the Buyer may reject the Goods and notify the Seller within [number] days.5. Warranty: The Seller warrants that the Goods are free from defects in materials and workmanship. If any defects are found within [warranty period], the Seller shall replace the Goods at no additional cost to the Buyer.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration association].7. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller Signature] [Buyer Signature]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller], with a business address at [Address], and [Buyer], with a business address at [Address].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods]2. Price: The total purchase price for the goods shall be [Price]. The price is inclusive of all taxes, duties, and other charges.3. Delivery: The Seller shall deliver the goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear any additional costs for expedited delivery.4. Payment: The Buyer shall pay the total purchase price in full upon delivery of the goods. Payment shall be made in [Currency] by [Payment Method].5. Warranties: The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period]. The Seller shall repair or replace any defective goods at no additional cost to the Buyer.6. Indemnification: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from the use or sale of the goods.7. Governing Law: This Contract shall be governed by the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [Arbitration Location].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements, written or oral.IN WITNESS WHEREOF, the parties have executed this Contract on the date first above written.Seller: ________________________Buyer: ________________________Date: ________________________This Sales Contract is a legally binding agreement between the Seller and the Buyer for the sale of goods. Both parties should carefully review and understand the terms and conditions before signing.篇5Sales contract1. Parties to the contract:This Sales Contract (hereinafter referred to as "Contract") is entered into between:Seller: [Name of the Seller]Registered address: [Address of the Seller]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]Buyer: [Name of the Buyer]Registered address: [Address of the Buyer]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]2. Product details:The Seller agrees to sell and the Buyer agrees to purchase the following products:Product name: [Name of the product]Description: [Brief description of the product]Quantity: [Quantity of the product]Unit price: [Price per unit]Total price: [Total price of the products]3. Payment terms:The Buyer agrees to pay the total amount of the products to the Seller in the following manner:- 30% of the total amount as a deposit upon signing of the contract- 70% of the total amount upon delivery of the productsPayment method: [Payment method]Currency: [Currency]Payment deadline: [Deadline for payment]4. Delivery terms:The Seller agrees to deliver the products to the Buyer at the following address:Delivery address: [Address of delivery]Delivery method: [Method of delivery]Delivery time: [Time of delivery]5. Quality assurance:The Seller guarantees that the products supplied under this Contract meet the required quality standards. In case of any defects or non-conformities, the Seller agrees to replace or refund the affected products.6. Governing law:This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute resolution:Any disputes arising out of or in connection with this Contract shall be settled amicably through negotiations between the Parties. If no resolution can be reached, the Parties agree tosubmit the dispute to arbitration in accordance with the rules of [Arbitration Institution].8. Miscellaneous:This Contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings, written or oral, relating to the subject matter hereof.In witness whereof, the Parties have executed this Contract as of the date first above written.Seller:Signature: _____________________Printed name: _________________Date: _______________________Buyer:Signature: _____________________Printed name: _________________Date: _______________________篇6Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Contract Date], by and between [Seller], a company incorporated under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer], a company incorporated under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Price: The Purchase Price shall be as set forth in Exhibit A, and shall be paid by Buyer to Seller in the manner set forth in Exhibit A.3. Delivery: Seller shall deliver the Goods to Buyer at the location set forth in Exhibit A. Delivery shall be made on or before the delivery date set forth in Exhibit A.4. Acceptance: Buyer shall inspect the Goods promptly upon delivery. If Buyer finds any defects in the Goods, Buyer shall notify Seller within [number] days of delivery and provide Seller with a written description of the defects. Upon receiving suchnotice, Seller shall take reasonable steps to correct the defects in the Goods.5. Title and Risk of Loss: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to Buyer.6. Warranty: Seller warrants that the Goods will conform to the specifications set forth in Exhibit A. Seller further warrants that the Goods will be free from defects in materials and workmanship for a period of [number] months from the date of delivery.7. Limitation of Liability: In no event shall Seller be liable to Buyer for any indirect, special, incidental, consequential or punitive damages arising out of or in connection with this Contract, whether or not Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].9. Entire Agreement: This Contract represents the entire agreement between the parties with respect to the sale of the Goods, and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.[Seller]By: _______________________Name: _________________Title: _________________[Buyer]By: _______________________Name: _________________Title: _________________EXHIBIT AGoods: [Description of Goods]Purchase Price: [Price]Delivery Date: [Date]Delivery Location: [Address]。

销售合同英文版6篇篇1Sales ContractThis Sales Contract (the "Contract") is made and entered into on [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods described in Exhibit A (the "Goods").2. Purchase PriceThe purchase price for the Goods shall be [amount] (the "Purchase Price"). Buyer agrees to pay the Purchase Price to Seller in full upon delivery of the Goods.3. DeliverySeller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Any delay in delivery shall entitle Buyer to cancel this Contract.4. Inspection and AcceptanceBuyer shall inspect the Goods promptly upon delivery. Buyer may reject any Goods that are damaged, defective, or not in conformity with the specifications set forth in Exhibit A. Any rejected Goods shall be returned to Seller at Seller's expense.5. Payment TermsBuyer shall pay the Purchase Price to Seller by [payment method] within [number] days of delivery of the Goods. Late payments shall accrue interest at a rate of [percentage] per month.6. WarrantiesSeller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Seller further warrants that the Goods are free and clear of any liens or encumbrances.7. Limitation of LiabilityIn no event shall either party be liable to the other for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract, even if such party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State].9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Buyer:[Signatures]EXHIBIT A[Description of Goods]This Sales Contract is hereby accepted by both parties:Seller: Buyer:[Signatures] [Signatures]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is agreed upon between [Seller Company Name], with its registered office located at [Address], and [Buyer Company Name], with its registered office located at [Address], on [Date].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, quality, and price].2. Payment: The Buyer agrees to pay the Seller the total sum of [Total amount] for the goods as specified in Clause 1. Payment shall be made in [Currency] within [Number of days] days from the date of delivery.3. Delivery: The Seller shall deliver the goods to the Buyer's address as specified in this Contract, within [Number of days] days from the date of signing this Contract unless otherwise agreed upon by both parties.4. Inspection and Acceptance: The Buyer shall inspect the goods upon delivery and shall have [Number of days] days to notify the Seller of any defects or non-conformities. Failure to do so will be deemed as acceptance of the goods.5. Warranties: The Seller warrants that the goods are free from defects in materials and workmanship and are fit for the purpose for which they are intended. The Seller shall remedy any defects or non-conformities at its own expense.6. Indemnity: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising out of the Seller's breach of this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country/State].8. Dispute Resolution: Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration Board].9. Confidentiality: Both parties agree to maintain the confidentiality of all information exchanged in connection with this Contract.10. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Company Name] [Buyer Company Name]By: __________________________ By: __________________________Name: Name:Title: Title:Date: Date:篇3Sales ContractThis Sales Contract (“Contract”) is made and entered into this [date], by and between [Seller name], with its principal place of business at [Seller address] (“Seller”) and [Buyer name], with its principal place of business at [Buyer address] (“Buyer”).WHEREAS, Seller desires to sell and Buyer desires to purchase certain goods on the terms and conditions set forth in this Contract;NOW, THEREFORE, in consideration of the mutual covenants and promises made by the parties hereto, the Seller and Buyer agree as follows:1. Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”):[List of Goods]2. Quantity: The quantity of Goods to be sold and purchased under this Contract shall be as set forth in the Purchase Order agreed upon by the parties.3. Price: The purchase price for the Goods shall be [Price] per unit, for a total purchase price of [Total Price]. Payment shall be made in full upon delivery of the Goods.4. Delivery: The Goods shall be delivered by Seller to Buyer at the following address: [Delivery Address]. Delivery shall be completed on or before the agreed upon delivery date specified in the Purchase Order.5. Inspection and Acceptance: Buyer shall have [number] days after delivery of the Goods to inspect and test the Goods. IfBuyer determines that the Goods are not in conformity with the specifications set forth in this Contract, Buyer shall notify Seller in writing within such [number] day period, and Seller shall be responsible for replacing or repairing the Goods at Seller’s expense.6. Risk of Loss: The risk of loss of the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer at the delivery address specified in this Contract.7. Warranties: Seller warrants that the Goods will conform to the specifications set forth in this Contract and will be free from defects in material and workmanship for a period of [number] days from the date of delivery. Seller’s sole liability and Buyer’s exclusive remedy for breach of this warranty shall be the replacement or repair of the defective Goods.8. Limitation of Liability: In no event shall either party be liable for any consequential, incidental, special or punitive damages, including lost profits, arising out of or related to this Contract.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the state of [state].10. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed by their respective authorized representatives as of the day and year first above written.SELLER: BUYER:________________________ _______________________[Seller Name] [Buyer Name]By: By:Name: Name:Title: Title:篇4Sales ContractThis Sales Contract ("Contract") is entered into on [Date] between [Seller], a company organized and existing under thelaws of [Country], having its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], having its principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit. Buyer shall pay the total purchase price to Seller in accordance with the payment terms set forth in Exhibit B attached hereto.3. Delivery: Seller shall deliver the Goods to Buyer at the location specified in Exhibit A within [Number] days after the date of this Contract. Buyer shall be responsible for all shipping and handling costs related to the delivery of the Goods.4. Inspection and Acceptance: Buyer shall inspect the Goods upon delivery and shall notify Seller of any defects ornon-conformities within [Number] days of delivery. Buyer's failure to notify Seller within the specified time period shall be deemed acceptance of the Goods.5. Warranties: Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of Liability: Seller shall not be liable for any incidental, consequential, or punitive damages arising out of or related to this Contract, whether in contract, tort, or otherwise.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or related to this Contract shall be resolved by arbitration in accordance with the rules of [Arbitration Association].[Remainder of page intentionally left blank; signature page follows.]IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: Buyer:__________________________ _________________________[Signature] [Signature][Name] [Name][Title] [Title]篇5Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Date] by and between [Seller Name], with a mailing address of [Seller Address] ("Seller"), and [Buyer Name], with a mailing address of [Buyer Address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”): [Description of Goods].2. Purchase Price: The total purchase price for the Goods shall be [Purchase Price], which shall be paid in the following manner: [Payment Terms].3. Delivery: Seller agrees to deliver the Goods to Buyer’s address at [Buyer Address] within [Delivery Timeframe]. Time is of the essence with respect to delivery.4. Inspection and Acceptance: Buyer shall have [Inspection Period] days from the delivery of the Goods to inspect and accept or reject the Goods. If Buyer rejects the Goods, Buyer shallpromptly notify Seller in writing with an explanation of the reasons for rejection.5. Warranty: Seller warrants that the Goods will be free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery. If the Goods are defective, Seller shall replace or repair the Goods at no additional cost to Buyer.6. Limitation of Liability: Seller’s liability und er this Contract shall be limited to the purchase price paid by Buyer for the Goods.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral, between the parties.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]____________________ ____________________Seller BuyerDate: ___________________ Date: ___________________This Sales Contract is effective as of the date first written above.篇6Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].1. Sale of GoodsSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"):Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Price per unit]Total Price: [Total price of Goods]2. DeliverySeller shall deliver the Goods to Buyer at the address specified by Buyer on or before [delivery date]. Delivery shall be made by [mode of transportation]. Buyer shall be responsible for any shipping and handling costs associated with the delivery of the Goods.3. PaymentBuyer shall pay Seller the total price of the Goods upon delivery. Payment shall be made in [currency] by [method of payment].4. Inspection and AcceptanceBuyer shall inspect the Goods upon delivery and shall have [number] days to notify Seller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, Buyer shall be deemed to have accepted the Goods.5. WarrantiesSeller warrants that the Goods shall conform to the description provided and shall be free from defects in material and workmanship. Buyer's sole remedy for breach of this warranty shall be the replacement or repair of the defective Goods.6. Limitation of LiabilitySeller shall not be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with the sale or use of the Goods.7. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [country]. Any disputes arising under this Contract shall be resolved through arbitration in [city], in accordance with the rules of [arbitration organization].8. Entire AgreementThis Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller]By:_________________________Name:_______________________Title:_______________________[Buyer]By:_________________________ Name:_______________________ Title:_______________________。

英文购销合同范本6篇篇1Sales ContractThis Sales Contract is made and entered into on this [date] by and between [Seller], with its principal place of business located at [address], hereinafter referred to as the "Seller", and [Buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer".1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of product 1: [specifications]- Description of product 2: [specifications]- Description of product 3: [specifications]2. QuantityThe Buyer agrees to purchase a total quantity of [quantity] units of the above-mentioned products.3. PriceThe total price for the products shall be [total price] USD, inclusive of all taxes and duties. Payment shall be made in [currency] through [payment method].4. DeliveryThe Seller shall deliver the products to the Buyer's designated location at [address] within [number] days of the signing of this contract. The Seller shall bear all costs and risks of transportation.5. Quality AssuranceThe Seller guarantees that all products delivered shall meet the required specifications and quality standards as agreed upon in this contract. The Buyer has the right to inspect the products upon delivery and reject any non-conforming products.6. WarrantyThe Seller warrants that the products sold are free from defects in material and workmanship and shall comply with all applicable laws and regulations. Any defective products shall be replaced by the Seller at no cost to the Buyer.7. ConfidentialityBoth parties agree to maintain the confidentiality of all information exchanged during the course of this contract and not disclose any proprietary information to third parties without prior written consent.8. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [jurisdiction].In witness whereof, the parties hereto have executed this contract as of the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ____________This Sales Contract contains the entire agreement between the Seller and Buyer and supersedes all prior agreements and understandings, whether written or oral.篇2Sample English Sales and Purchase ContractThis Sales and Purchase Contract is entered into on [Date] by and between:Seller: [Name of Seller]Address: [Seller's Address]Contact: [Seller's Contact Information]Buyer: [Name of Buyer]Address: [Buyer's Address]Contact: [Buyer's Contact Information]1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name: [Name of Product]- Quantity: [Number of Units]- Description: [Detailed Description of Product]2. Price:The total purchase price for the products listed above is [Total Price], which includes all applicable taxes and shipping fees. Payment shall be made in [Currency] by [Payment Method], with [Details of Payment Terms].3. Delivery:The Seller agrees to deliver the products to the Buyer's address at [Delivery Address] within [Delivery Timeframe]. The Buyer shall be responsible for any customs duties or taxes imposed upon the products.4. Inspection and Acceptance:The Buyer shall inspect the products upon delivery and shall have [Number of Days] days to notify the Seller of any defects or discrepancies. Failure to do so shall constitute acceptance of the products.5. Warranty:The Seller warrants that the products shall conform to the description provided and shall be free from any defects in materials or workmanship for a period of [Warranty Period]. The Seller's sole liability under this warranty shall be to repair or replace any defective products.6. Liability:Neither party shall be liable for any indirect, incidental, or consequential damages arising from the sale or purchase of the products.7. Governing Law:This contract shall be governed by the laws of [Jurisdiction].8. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.Seller: _________________________Buyer: _________________________篇3Sales and Purchase ContractThis Sales and Purchase Contract is entered into on this [date] day of [month], [year], between [seller], with its principal place of business located at [address], hereinafter referred to as the "Seller," and [buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer."1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products: [list of products].2. Quantity: The Buyer agrees to purchase [quantity] of the products as specified in clause 1.3. Price: The parties agree that the price for the products shall be [price per unit] per unit. The total purchase price shall be [total price].4. Payment: The Buyer agrees to pay the total purchase price within [number] days of the signing of this agreement.5. Delivery: The Seller agrees to deliver the products to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping costs incurred.6. Inspection and Acceptance: The Buyer shall have [number] days from the date of delivery to inspect the products and notify the Seller of any defects or discrepancies. Failure to notify the Seller within this timeframe shall constitute acceptance of the products.7. Title and Risk of Loss: Title to the products shall pass to the Buyer upon delivery. The risk of loss shall remain with the Seller until delivery.8. Warranty: The Seller warrants that the products are free from defects in materials and workmanship. The Seller's liabilityunder this warranty shall be limited to the replacement or repair of defective products.9. Governing Law: This agreement shall be governed by the laws of [state/country].10. Entire Agreement: This agreement constitutes the entire understanding between the parties and supersedes all prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇4Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is made on this [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's contact number]Email: [Seller's Email]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's contact number]Email: [Buyer's Email]Hereinafter referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description of Goods:- Quantity:- Price per unit:- Total Price:2. DeliveryThe Seller shall deliver the goods to the Buyer's address as follows:- Delivery date:- Delivery method:- Delivery cost:3. PaymentThe Buyer agrees to pay the Seller the total price of the goods in the following manner:- Payment method:- Payment terms:- Due date:4. Inspection and AcceptanceUpon delivery of the goods, the Buyer shall inspect the goods and notify the Seller of any defects or discrepancies within [number] days. Failure to do so shall constitute acceptance of the goods.5. WarrantiesThe Seller warrants that the goods are free from defects in materials and workmanship and conform to the specifications provided. The Seller further warrants that they have good title to the goods and have the right to sell them to the Buyer.6. Governing LawThis Contract shall be governed by the laws of[State/Country] and any disputes arising out of this Contract shall be resolved through arbitration.7. Entire AgreementThis Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract on the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ___________This Sales and Purchase Contract is hereby accepted and approved by both Parties.[Signature of Seller][Signature of Buyer][Name of Signatory][Title of Signatory]篇5Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is entered into on [date], by and between [Seller], having its principal place of business at [address] ("Seller"), and [Buyer], having its principal place of business at [address] ("Buyer").1. Sale of GoodsSeller agrees to sell, and Buyer agrees to purchase, the following goods (the "Goods"):Description: [Description of goods]Quantity: [Quantity of goods]Unit Price: [Price per unit]Total Price: [Total price]2. DeliveryThe Goods shall be delivered by Seller to Buyer at [delivery location] on or before [delivery date]. Delivery shall be made during normal business hours, unless otherwise agreed upon by both parties.3. Inspection and AcceptanceBuyer shall have the right to inspect the Goods upon delivery. Buyer must notify Seller of any non-conformities within [number]days of delivery. If no notice is given, Buyer shall be deemed to have accepted the Goods.4. PaymentBuyer agrees to pay Seller the total price of the Goods in full within [number] days of delivery. Payment shall be made in [currency] by [method of payment]. Late payments shall incur a late fee of [percent]% per week.5. Risk of LossRisk of loss of the Goods shall pass from Seller to Buyer upon delivery.6. WarrantiesSeller warrants that the Goods are free from defects in material and workmanship. If any defects are found within [number] days of delivery, Seller shall replace the defective Goods at no additional cost to Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first written above.Seller: ___________________________[Name and Title]Buyer: ___________________________[Name and Title]篇6Purchase and Sale ContractThis Purchase and Sale Contract (the "Contract") is entered into as of [Date], by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described as follows: [Description of Goods]. The goods shall be delivered by Seller to Buyer at [Delivery Location] on [Delivery Date].2. Price: The purchase price for the goods shall be [Price] per unit. Payment shall be made by Buyer to Seller in [Currency] within [Number] days of delivery of the goods.3. Delivery: The goods shall be delivered by Seller to Buyer at the Delivery Location on the Delivery Date. Buyer shall have the right to inspect the goods upon delivery and shall notify Seller of any defects or non-conformities within [Number] days.4. Title and Risk of Loss: Title to and risk of loss of the goods shall pass from Seller to Buyer upon delivery of the goods at the Delivery Location.5. Warranties: Seller warrants that the goods shall conform to the description provided and shall be free from defects in materials and workmanship. Seller further warrants that Seller has good and marketable title to the goods and has the right to sell the goods to Buyer.6. Indemnification: Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, and expenses arising out of Seller's breach of any warranty or representation in this Contract.7. Governing Law and Jurisdiction: This Contract shall be governed by and construed in accordance with the laws of[Jurisdiction]. Any disputes arising under this Contract shall be resolved by arbitration in [Jurisdiction], in accordance with the rules of the [Arbitration Body].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller: [Name]Buyer: [Name]Date: [Date]。

英文销售合同3篇s both in amount and quantity allowed at the sellers option.6 生产国和制造厂家country of origin and manufacturer7 包装：packing：8 唛头：shipping marks：9 装运期限：time of shipment：10 装运口岸：port of loading：11 目的口岸：port of destination：12 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance：to be effected by buyers for 110% of full invoice value covering _____ up to _____ only.13 付款条件：买方须于_____年_____月_____日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。

信用证议付有效期延至上列装运期后15天在中国到期，该信用证中必须注明允许分运及转运。

payment：by confirmed, irrevocable, transferable and divisible l/c to be available by sight draft to reach the sellers before ___/___/_____ and to remainvalid for ingotiation in china until 15 days after the aforesaid time of shipment. tje l/c must specify that transhipment and partial shipments are allowed.14 单据：documents：15 装运条件：terms of shipment：16 品质与数量、重量的异义与索赔：quality/quantity discrepancy and claim：17 人力不可抗拒因素：由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、防止和克服的其他事件导致不能或暂时不能全部或局部履行本协议，该方不负责任。

中英文销售合同5篇篇1Sales ContractThis Sales Contract ("Contract") is made on [Insert Date], between [Seller’s Name], with its principal place of business located at [Seller’s Address], and [Buyer’s Name], with its principal place of business located at [Buyer’s Address]. Seller and Bu yer are collectively referred to as the “Parties”.1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1], quantity: [Quantity], unit price: [Price]- [Product 2], quantity: [Quantity], unit price: [Price]- [Product 3], quantity: [Quantity], unit price: [Price]2. Delivery: The Seller agrees to deliver the products as follows:- Delivery Location: [Delivery Address]- Delivery Date: [Date]- Delivery method: [Method]3. Payment: The Buyer agrees to pay the Seller for the products in the following manner:- Total Price: [Total Amount]- Payment Method: [Method]- Payment Terms: [Terms]4. Inspection and Acceptance: The Buyer shall inspect the products upon delivery and shall have [Number] days to notify the Seller of any defects. Failure to notify the Seller within the specified period shall constitute acceptance of the products.5. Warranty: The Seller warrants that the products will be free from defects in materials and workmanship for a period of [Warranty Period]. If any defects are discovered within the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Liability: The Seller shall not be liable for any damages resulting from the use or misuse of the products by the Buyer or any third party.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].8. Entire Agreement: This Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Date: ________________________[Attach signatures of both parties]This Sales Contract is hereby agreed to by the Parties as of the date first written above.[Seller’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________[Buyer’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________篇2Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], with its principal place of business located at [address], and [Buyer], with its principal place of business located at [address].1. Goods SoldSeller agrees to sell and Buyer agrees to purchase the following goods:- Description of goods- Quantity- Price2. DeliverySeller shall deliver the goods to Buyer at the following address: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for any shipping costs associated with the delivery of the goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the goods, which shall be [total amount]. Payment shall be made in the following manner:- [Payment method]- [Payment schedule]4. WarrantiesSeller warrants that the goods sold under this contract are free from defects in materials and workmanship and conform to the specifications provided by the Seller. Seller further warrants that it has good and marketable title to the goods. Any claims for breach of warranty must be made within [timeframe] after delivery of the goods.5. Inspection and AcceptanceBuyer shall have [number] days after delivery of the goods to inspect them. If Buyer finds any defects or nonconformities, Buyer must notify Seller in writing within [timeframe]. Seller shall have the opportunity to inspect the goods and make any necessary repairs or replacements.6. Limitation of LiabilitySeller's liability for any breach of this contract or for any claims arising out of the sale of the goods is limited to the purchase price of the goods. Seller shall not be liable for any consequential, incidental, or punitive damages.7. Governing LawThis contract shall be governed by the laws of[state/country]. Any disputes arising out of this contract shall be resolved through arbitration in [location].8. Entire AgreementThis Sales Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Sales Contract as of the date first written above.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇3Sales ContractThis Sales Contract (hereinafter referred to as "Contract") is entered into by and between Party A [Seller], located at [Address], and Party B [Buyer], located at [Address], on [Date].Article 1. Subject of the Contract1.1 Party A agrees to sell and Party B agrees to purchase the following goods:- Quantity: [Number]- Description: [Product Description]- Unit Price: [Price]- Total Price: [Price x Quantity]- Delivery Date: [Date]Article 2. Payment Terms2.1 The total price of the goods shall be paid by Party B to Party A in the following manner:- [Payment Method]- [Payment Schedule]- [Bank Details]Article 3. Delivery Terms3.1 Party A shall deliver the goods to the address specified by Party B on the agreed delivery date.3.2 Party A shall be responsible for the packaging and transportation of the goods to ensure they arrive in good condition.3.3 Party B shall inspect the goods upon delivery and notify Party A of any defects or discrepancies within [Number] days.Article 4. Title and Risk4.1 Title to the goods shall pass to Party B upon full payment of the total price.4.2 The risk of loss or damage to the goods shall pass to Party B upon delivery.Article 5. Warranties5.1 Party A warrants that the goods are free from defects in material and workmanship and conform to the description provided.5.2 Party A shall be responsible for repairing or replacing any defective goods at no additional cost to Party B.Article 6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].Article 7. Dispute Resolution7.1 Any disputes arising from this Contract shall be resolved through negotiation in good faith.7.2 If a resolution cannot be reached, the dispute shall be resolved through arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Party A: ________________________[Signature][Name][Title]Date:Party B: ________________________[Signature][Name][Title]Date:This Sales Contract is hereby accepted and agreed to by both Parties.以上是一份典型的中英文销售合同，包括订购商品、付款条款、交货条件、担保、适用法律等内容。

英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the goods listed below to the Buyer on the terms and conditions stated below:1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products with specific details such as item name, quantity, specifications, unit price, total value, etc.]2. Terms of Payment:2.1 The total value of the contract shall be paid in full by the Buyer to the Seller through [specify payment method such aswire transfer, credit card, etc.] within [specify timeframe such as 30 days of signing the contract].2.2 In case of delayed payment, the Buyer shall pay a penalty to the Seller equal to [specify percentage] of the total contract value for each week of delay.3. Delivery:3.1 The Seller shall deliver the products to the Buyer at the agreed place of delivery within [specify timeframe such as 30 days] from the date of receipt of payment.3.2 Any delay in delivery not caused by Force Majeure shall be considered a breach of contract.4. Quality Assurance:The Seller guarantees that the products are new and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within [specify timeframe such as 3 months] from the date of delivery.5. Ownership and Risk Transfer:Ownership and risk of loss or damage to the products shall pass to the Buyer upon delivery at the agreed place of delivery.6. Warranty:The Seller provides a warranty for the products covering any manufacturing defects for a period of [specify duration such as 1 year] from the date of delivery. During this period, the Seller shall replace or repair any defective products free of charge.7. Force Majeure:If performance of this contract is prevented, restricted or delayed due to Force Majeure circumstances, the Seller shall notify the Buyer promptly and take appropriate measures to ensure prompt performance under such circumstances.8. Confidentiality:Both parties shall keep confidential all information related to this contract that is not intended for public disclosure.9. Disputes Resolution:Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institute or court] for arbitration or legal action.10. Miscellaneous:This contract constitutes the entire agreement between the Buyer and the Seller and supersedes any prior agreements orunderstandings, whether oral or written, regarding the subject matter of this contract. No modifications to this contract shall be binding unless made in writing and signed by both parties. This contract shall be governed by and construed in accordance with the laws of [specify country].IN WITNESS WHEREOF, the parties have executed this contract in [specify place] on [specify date].Buyer Signature: _____________________________________Date: _____________________Seller Signature: _____________________________________Date: _____________________Note: This Sales Contract template is for reference only and should be customized according to specific needs and circumstances. It is recommended to have legal professionals review any legal document before its execution.篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. PRODUCTS AND SPECIFICATIONSThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which includes product name, specifications, quantity, and agreed price. The Seller shall ensure that the products are in accordance with the specifications mentioned in this Contract.2. PRICE AND PAYMENTThe total contract value shall be as per Annex A. The terms of payment are as follows: XX% advance payment prior to shipment, XX% against presentation of shipping documents, and XX% upon arrival and confirmation of the goods at the Buyer's premises. The Seller shall provide necessary documents for smooth customs clearance.3. DELIVERY AND QUALITYThe Seller shall ensure proper packing of the goods and shall mark clearly on each package the destination address, gross weight, net weight, and other necessary details required for smooth handling of the goods. The Seller shall ensure timely delivery of the goods to the Buyer as per agreed delivery schedule mentioned in Annex B. The Seller shall be responsible for ensuring the quality of the products in accordance with agreed specifications.4. PACKAGING AND MARKINGThe Seller shall ensure that proper packaging of the goods is done in a way that guarantees safe transportation and protection from damage or loss during transit. All packages must be properly marked with necessary details such as product name, quantity, and other necessary information.5. INSPECTION AND ACCEPTANCEUpon arrival of the goods at the Buyer's premises, the Buyer shall have the right to inspect the goods within a reasonable period of time to ensure that they are in accordance with agreed specifications and free from any defects or damages. If anydiscrepancies are found, the Buyer shall inform the Seller immediately for necessary action.6. FORCE MAJEURENeither party shall be liable for any failure to perform its obligations under this Contract due to causes beyond its reasonable control, such as acts of war, riots, strikes, lockouts, government intervention, fire, flood, earthquake, etc. Should such cause occur, the affected party shall notify the other party promptly and provide evidence to prove its inability to perform its obligations under this Contract. The parties shall negotiate in good faith to find a solution to resolve such issues.7. CONFIDENTIALITYBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose any confidential information to any third party without the prior written consent of the other party.8. WARRANTIES AND GUARANTEES9. TERMINATION10. MISCELLANEOUS篇3SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: __________ (Seller's Name)Party B: __________ (Buyer's Name)Article 1: Contract ObjectParty A agrees to sell the following products to Party B:________ (Product Description, Quantity, Specification, etc.).Article 2: Price and Payment2.1 The total contract price is ________ (Contract Price)________ (Currency).2.2 Payment terms: ________ (Payment Method, such as T/T, L/C, etc.).Article 3: Delivery and Quality3.1 Delivery date: ________ (Delivery Date).3.2 Quality standards: ________ (Quality Standards, such as international standards, agreed specifications, etc.).Article 4: Packaging and Shipping Marks4.1 Party A shall pack the products in accordance with the requirements of Party B and ensure that the packaging is suitable for transportation.4.2 Shipping marks shall include the following information: ________ (Shipping Marks Information).Article 5: Customs Clearance and Delivery Documents5.1 Party A shall provide necessary documents for customs clearance.5.2 Delivery documents shall include ________ (List of Delivery Documents).Article 6: Inspection and Claims6.1 Party B shall inspect the products upon arrival and notify Party A of any discrepancies within ________ (Inspection Period) after arrival.6.2 If Party B finds any defects in the products, Party A shall be responsible for replacing or repairing the products at its cost.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this contract that is not intended for public disclosure.Article 8: Force MajeureIf either party is unable to perform its obligations due to force majeure events, it shall notify the other party in a timely manner and provide evidence to support its claim. The two parties shall work together to resolve the issue.Article 9: Termination of ContractThis contract may be terminated by either party in the case of breach by the other party. In such case, the breaching party shall bear all losses caused by the termination.Article 10: Dispute ResolutionAny disputes arising from or in connection with this contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________ (Dispute Resolution Mechanism).Article 11: Miscellaneous11.1 This contract is made in ________ (Number of copies) copies, with each party holding ________ copies. The original and duplicate copies have the same legal effect.11.2 Any amendments or supplements to this contract must be made in writing and approved by both parties.11.3 This contract is effective from the date of signing by both parties and shall remain valid until fully performed or terminated as per the terms of this contract.篇4SALES CONTRACT销售合同This Sales Contract is made by and between [Buyer’s Name] (hereinafter referred to as the “Buyer”) and [Seller’s Name] (hereinafter referred to as the “Seller”), whereby the Buyer agrees to purchase from the Seller and the Seller agrees to sell the following commodity according to the terms and conditions stipulated below:兹经买卖双方同意，由买方购买卖方所售货物，双方签订本合同，按照下列条款操作：Article 1: Product Description and Quantity第一条：产品描述与数量The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific product details including name, model, size, quantity, color, etc.] (the “Products”).卖方同意出售，买方同意购买下述规格之产品：【详细的产品信息，包括产品名称、型号、尺寸、数量、颜色等】（以下简称“产品”）。

英文购销合同范本6篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree as follows:II. Products and SpecificationsThe products to be purchased and sold under this Contract are as follows: ______________ (Please specify the products, specifications, quantity, unit price, total value, etc.)III. Terms of DeliveryThe Seller shall deliver the products to the port/place specified below: ______________ (Delivery location). The mode of transportation, the date of shipment, and the port/place of receipt shall be agreed upon by both parties.IV. Terms of PaymentThe payment terms under this Contract shall be as follows: ______________ (Payment terms such as advance payment, terms of payment, documents required for payment, etc.).V. Quality Inspection and Warranty PeriodThe Seller shall ensure that the products are in conformity with the quality standards specified in this Contract. The warranty period shall be _______________ (Warranty period). During the warranty period, if any defects are found in the products, the Seller shall be responsible for repairing or replacing them at its own cost.VI. Risks and Penalties for Late Delivery or Non-DeliveryIf the Seller fails to make delivery of the products on time or delivers wrong specifications, it shall be responsible for any loss incurred to the Buyer. If the Seller cannot make delivery due to force majeure circumstances, it shall immediately notify the Buyer in writing and take proper measures to minimize the lossof both parties. The risks and penalties for late delivery ornon-delivery shall be agreed upon by both parties.VII. Confidentiality and Intellectual Property RightsVIII. Settlement of DisputesIX. General Clauses1) Force Majeure: Neither party shall be held responsible for failure or delay in performance of its obligations under this Contract due to force majeure causes such as natural disasters, government intervention or other unforeseeable circumstances beyond its control. If such circumstances occur, both parties shall endeavor to resume performance under this Contract as soon as possible after removal of such causes or upon receipt of advice from each other through diplomatic channels.篇2PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: ________________ (Name of Buyer)Seller: ________________ (Name of Seller)WHEREAS the Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. Commodities: ________________ (The specific commodity or products to be purchased and sold, including name, specifications, quantity, etc.)II. Price: ________________ (The agreed price for the commodity, including total price, unit price, currency, payment terms, etc.)III. Quality and Quantity: ________________ (The quality standards, inspection methods, and any applicable tolerance levels for the commodity. The quantity to be delivered by the Seller and accepted by the Buyer.)IV. Delivery:a. Place of Delivery: ________________ (The place where the commodity shall be delivered.)b. Time of Delivery: ________________ (The date or period in which the delivery should be completed.)c. Risks and Expenses: ________________ (The risks and expenses related to delivery such as transportation, insurance, customs clearance, etc.)d. Delay in Delivery: Penalty for delay in delivery if any shall be as per the agreed terms.e. Any other specific conditions related to delivery.V. Payment:a. Terms of Payment: ________________ (The payment terms agreed upon by both parties, such as advance payment, payment on delivery, payment terms in letters of credit, etc.)b. Time of Payment: ________________ (The date or period in which the payment should be made.)c. Late Payment Penalty: Penalty for late payment if any shall be as per the agreed terms.d. Any other specific conditions related to payment.VI. Inspection and Acceptance: ________________ (The inspection procedures, acceptance criteria, and any other related conditions for the commodity.)VII. Claims: ________________ (The procedures and conditions for claims in case of damage or loss of the commodity during transportation or other relevant matters.)VIII. Force Majeure: Both parties shall be entitled to claim compensation for any losses incurred due to force majeure events such as natural disasters, wars, riots, etc., which are beyond their control. The responsibilities of both parties shall be suspended during such events.IX. Confidentiality: Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure unless mutually agreed or required by law.X. Warranty and Guarantee: The Seller shall provide warranty and guarantee for the quality and performance of the commodity as per the agreed terms and conditions. Any defects or non-performance should be rectified by the Seller as per the warranty terms.XI. Termination: The Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide notice to the other party and specify the reasons for termination. The provisions related to claims, confidentiality, warranty andguarantee shall remain valid even after termination of this Contract.In witness whereof, the parties have executed this Contract in ________________ (Place) on the ________________ (Date).Buyer: _____________________ (Signature of Buyer) Title:_____________________ (Title of Buyer) Date: _________________ (Date of Signature)篇3PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:I. Contracting PartiesSeller: ___________________________ (Name of Seller)Address: _________________________ (Address of Seller)Buyer: ___________________________ (Name of Buyer)Address: _________________________ (Address of Buyer)II. Product DescriptionProduct Name: _________________________ (Product Name)Product Code: _________________________ (Product Code)Quantity: _________________________ (Quantity)Specification: _________________________ (Product specifications, including size, color, quality, etc.)Unit Price: _________________________ (Unit Price)Total Price: _________________________ (Total Price)III. Terms of PaymentThe Buyer shall make payment through ________________ (Payment method, e.g., wire transfer, letter of credit, etc.) in full before the delivery date specified in Clause IV.IV. Delivery TermsThe Seller shall ensure delivery of the products to the Buyer's designated location on or before ________________ (Delivery Date). Any delay in delivery shall be notified to the Buyer in advance.V. Quality AssuranceThe Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications andstandards. The Seller shall be responsible for any defects in material or workmanship.VI. Packaging and ShippingThe Seller shall properly pack and secure the products for shipment to ensure their safe arrival at the Buyer's designated location. The costs of packaging and shipping shall be borne by the Seller.VII. Risk and Title TransferRisk of loss or damage to the products shall be transferred to the Buyer upon delivery at the agreed location. Title to the products shall be transferred upon full payment by the Buyer.VIII. Confidentiality and Non-DisclosureBoth parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business practices. Neither party shall disclose such information to third parties without the other party's consent.IX. Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________________ (Warranty Period) for the products. During this period, the Seller shall repair or replace any defective products at its own cost. TheSeller shall also provide necessary after-sales service support as agreed by both parties.X. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, war, riots, etc. The affected party shall notify the other party promptly and provide reasonable evidence to prove the occurrence of such event.XI. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________________ (Dispute Resolution Mechanism, e.g., court, arbitration, etc.) for resolution.XII. Miscellaneous Provisions1. This Contract is made in ________________ (Language) and is binding upon both parties. Any amendments or modifications to this Contract must be made in writing and agreed upon by both parties.2. This Contract constitutes the entire agreement between the parties on the subject matter hereof and supersedes all prioragreements, understandings, and communications, whether oral or written.3. The invalidity or unenforceability of any provision of this Contract shall not affect the validity or enforceability of any other provision hereof.4. The laws of ________________ (Country/Jurisdiction) shall apply to this Contract. The courts of ________________ (Country/Jurisdiction) shall have jurisdiction over any disputes arising out of or in connection with this Contract.5. The Buyer may assign this Contract without the prior written consent of the Seller. The Seller may not assign this Contract without the prior written consent of the Buyer. However, either party may assign this Contract to a third party as part of a corporate reorganization or change of control transaction without obtaining prior consent from the other party if such assignment does not materially change the obligations of either party under this Contract.篇4PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:Seller: _________________________ (Name of Seller)Buyer: _________________________ (Name of Buyer)I. Contract Article and Quantity:The Seller agrees to sell and the Buyer agrees to purchase the following goods: (Insert details of the goods, including name, quantity, specifications, etc.)II. Price and Payment:The total contract price shall be ________ (Insert contract price). The payment terms are as follows:a. Deposit: The Buyer shall pay a deposit of ________ (Insert deposit amount) upon signing this Contract.b. Balance Payment: The balance payment shall be made within ________ (Insert payment period) after the delivery of the goods.c. Payment Method: The payment shall be made through________ (Insert payment method, e.g., bank transfer, T/T, etc.)III. Delivery and Shipment:a. Delivery Time: The Seller shall deliver the goods within________ (Insert delivery time) from the date of signing this Contract.b. Shipping Method: The goods shall be shipped by ________ (Insert shipping method, e.g., air, sea, land, etc.) at the Buyer's option.c. Place of Delivery: The place of delivery shall be ________ (Insert place of delivery).d. Risk Transfer: Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the place of destination specified in this Contract.IV. Quality and Inspection:a. Quality Standards: The goods shall be in accordance with the quality standards specified in this Contract.b. Inspection: The Buyer shall have the right to inspect the goods during production and prior to shipment. The Seller shall provide necessary assistance and facilitate such inspections.c. Quality Claim: If any claim is made by the Buyer regarding quality issues, such claim shall be made within ________ (Inserttime limit) after arrival of the goods at the port of destination. The Seller shall promptly address any quality issues raised by the Buyer in accordance with this Contract.V. Packaging and Marks:The Seller shall provide suitable packaging for the goods and ensure that all necessary marks and labels are affixed on each package, including name of goods, quantity, weight, measurements, gross weight, destination address, etc. All packaging must be suitable for long-distance transportation and must withstand normal conditions during transportation and handling without damage to or loss of the contents.VI. Claims and Penalties:a. If any claim is made by the Buyer due to late delivery or any other breach by the Seller, such claim shall be made in writing within ________ (Insert time limit) from the date of arrival of the goods at the port of destination. The Seller shall promptly address any claims raised by the Buyer in accordance with this Contract.b. If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer due to such failure. Penalties for late delivery or breach ofcontract may be imposed in accordance with relevant laws and regulations.c. Any claims or disputes arising from or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such claims or disputes may be submitted to arbitration in accordance with relevant laws and regulations. Any disputes arising from this Contract shall be subject to arbitration in ________ (Insert place of arbitration). The arbitration decision shall be final and binding on both parties.VII. Force Majeure:In case of Force Majeure circumstances such as war, earthquake, flood, fire or other unforeseeable circumstances rendering performance of this Contract impossible or very difficult, both parties should strive to reach agreement on a solution through consultation before invoking Force Majeure as a reason for terminating or postponing performance under this Contract..VIII.. Miscellaneous:This Contract constitutes the entire agreement between both parties pertaining to the subject matter hereof andsupercedes all prior agreements whether written or oral between both parties pertaining to such subject matter. No amendment or modification of this Contract shall be valid unless made in writing signed by both parties..IX.. Entire Agreement/ Governing Law：This Contract constitutes the entire agreement between buyer and seller relating to its subject matter and no further oral promises are made.. This contract is governed by ________ law..X.. Entire Agreement/ Severability：篇5PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree to conclude this Contract subject to the terms and conditions stipulated below:II. Commodities and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodities: _________________ (Commodities) in the quantity specified in the attached Schedule A.III. Price and Terms of Payment1. The total amount of this Contract is ___________________ (USD or other currency), the unit price per metric ton is___________________ (USD or other currency per metric ton). Total quantity and total amount shall be specified in Schedule A.IV. Delivery Time and Place of Shipment篇6Buyer (甲方): _____________________Seller (乙方): _____________________In consideration of the mutual promises and agreements made and intended to be performed under the terms and conditions stated below, the Buyer and the Seller agree as follows:1. Description of Goods （商品描述）The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:（双方在此填写商品名称、规格、数量等详细信息）2. Price and Payment Terms （价格及付款条款）The total value of this contract is ____ USD. （在此填写合同总价）Payment terms: （描述付款方式和条件，例如预付款、尾款、支付方式等）3. Delivery Terms （交货条款）The Seller shall deliver the goods within ____ days after receiving the order confirmation and payment of ____% of the total contract value.（描述交货期限、地点、方式等）4. Quality and Inspection （质量及检验）The Seller shall ensure that the goods are new, sound, in good condition, free from damage and defects, and comply with all applicable specifications and standards. The Buyer shall have the right to inspect the goods before shipment.（描述商品质量标准、检验方式等）5. Risk and Ownership Transfer （风险及所有权转移）Risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the agreed place of delivery. Ownership of the goods shall transfer to the Buyer upon full payment of the contract price.（描述风险和所有权转移的细节）6. Warranty and Guarantee （保修及保证）The Seller shall provide warranty and guarantee for the goods in accordance with the contract and applicable laws.（描述保修期限、保修范围、保证事项等）7. Force Majeure （不可抗力）If either party is prevented from performing its obligations due to force majeure, it shall promptly notify the other party in writing and take reasonable measures to minimize the loss.（描述不可抗力事件的认定和处理方式）8. Settlement of Disputes （争议解决）Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to ____ for arbitration.（描述争议解决的方式和机构等）9. General Terms （通用条款）（在此添加任何其他适用的通用条款，例如保密义务、合同修改、适用法律等）10. Miscellaneous （其他事项）This contract is made out in ____ copies, ____ for the Seller and ____ for the Buyer.（描述合同份数等）The parties have read and understood all the terms and conditions stated above and have signed this Agreement in witness thereof.（双方已阅读并理解以上所有条款和条件，并已签署本协议为证。

英文版销售合同样本8篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer").I. Scope of Contract:1. The Seller agrees to sell and the Buyer agrees to purchase the goods listed in Annex A attached hereto and made a part of this Contract by reference, under the terms and conditions stipulated below.II. Price and Payment:2. The total amount of the contract is ___________ dollars ($____) ONLY, United States currency.3. Payment shall be made by T/T (telegraphic transfer) to the Seller's account as follows:a. A deposit of ___% of the total contract value shall be paid within __ days after the signing of this Contract.b. The balance shall be paid against the copy of the shipping documents confirmed by the Seller's email within __ days after the goods are shipped.III. Delivery:4. The Seller shall deliver the goods within ____ days after receiving the deposit payment from the Buyer.5. The Seller shall notify the Buyer by email about the date of dispatch and expected arrival date of the goods at the port of destination.6. In case of late delivery, the Seller shall be responsible for any loss incurred to the Buyer due to late arrival of the goods at the port of destination.IV. Quality and Inspection:7. The goods shall be in accordance with the quality, specifications and quantity stated in Annex A. Any deviation from the agreed specifications shall be notified in writing by theBuyer to the Seller immediately upon discovery of such deviation. The Seller shall be responsible for any deviation in quality and quantity which does not conform to the contract specifications or quality requirements agreed upon between both parties.V. Risk and Title Transfer:9. Title and risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the port of destination specified in Annex A. Prior to such delivery, all risks related to loss or damage of the goods shall be borne by the Seller.VI. Warranty:VII. Force Majeure:VIII. Disputes Settlement:篇2SALES CONTRACTThis Sales Contract is made on [date] between [Buyer's Full Name and Address] ("Buyer") and [Seller's Full Name and Address] ("Seller").1. Parties and Product(a) The Seller shall sell and the Buyer shall purchase the products listed in Annex A attached to this Contract.(b) The product specifications, quality standards, packaging, and other related matters shall be as per the details agreed upon by both parties.2. Price and Payment(a) The price of the products shall be as stated in Annex A. Any changes to the price must be mutually agreed upon in writing.(b) Payment shall be made in US dollars (USD) through the method specified in Annex B.3. Delivery and Shipping(a) The Seller shall ensure timely delivery of the products to the port specified in Annex C.(b) Shipping documents shall be provided by the Seller to the Buyer in a timely manner.4. Quality AssuranceSeller guarantees that all products sold to Buyer will be of the quality, specifications, and quantity agreed upon by both parties. Any discrepancies shall be promptly resolved at Seller's cost.5. Warranty and Returns(a) Seller provides a warranty period of [specify period] from the date of delivery for any defects in material or workmanship. During this period, Buyer may return products that do not meet agreed-upon standards for replacement or refund.(b) Details of returns procedures are outlined in Annex D.6. Force MajeureIn case of force majeure events, both parties shall strive to minimize the impact on this contract through mutual consultation and cooperation.7. ConfidentialityBoth parties shall keep confidential all information related to this contract, except for information that is already in the public domain or required to be disclosed by law.8. TerminationThis contract may be terminated by either party giving written notice to the other party if there is a breach of any term of this contract that cannot be resolved within a mutually agreed period.9. Jurisdiction and Disputes(a) This contract shall be governed by the laws of [specify country].(b) Any disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, the dispute shall be submitted to the courts of [specify country/jurisdiction].10. Miscellaneous(a) This contract constitutes the entire agreement between the parties and no modifications shall be made except in writing signed by both parties.(b) This contract is binding on both parties and their respective assigns, successors, and legal representatives.ANNEX A: Product List, Specifications, and PricesANNEX B: Payment Details and InstructionsANNEX C: Shipping and Delivery DetailsANNEX D: Returns and Warranty ProceduresBuyer: [Signature]Date: [Date]Seller: [Signature]Date: [Date]篇3Sales ContractContracting PartiesSeller:Name of Seller: [Name of Seller]Registered Address: [Registered Address]Contact Information: [Contact Information]Buyer:Name of Buyer: [Name of Buyer]Registered Address: [Registered Address]Contact Information: [Contact Information]This Sales Contract is made on [Date] by and between the Seller and the Buyer, concerning the sale of the following products:Article of SaleProduct Name: [Product Name]Product Specifications: [Product Specifications]Quantity: [Quantity] unitsUnit Price: [Unit Price] USDTotal Contract Value: [Total Contract Value] USDPayment Terms: [Payment Terms]Delivery Terms: [Delivery Terms]Other terms and conditions as mutually agreed upon by both parties.Terms and Conditions of Sale1. Scope of ContractThis Contract outlines the terms and conditions under which the Seller agrees to sell and the Buyer agrees to purchase the Article of Sale specified above.2. Product Quality and SpecificationsThe Seller guarantees that the Product shall be in conformity with the specifications and quality standards set out in this Contract and shall be free from any defects in materials or workmanship.3. PaymentPayment terms shall be as specified in this Contract. The Buyer shall make timely payment according to the agreed terms. Any delay in payment shall be subject to penalties as mutually agreed upon by both parties.4. Delivery and ShippingThe Seller shall ensure timely delivery of the Product to the Buyer according to the agreed delivery terms. The risk of loss or damage to the Product shall pass to the Buyer upon delivery. Any delay in delivery shall be subject to penalties as agreed upon by both parties.5. Warranty and售后支持（After-sales Support）The Seller shall provide a warranty period of [specify period] from the date of delivery for any defects in materials or workmanship found in the Product. During this period, the Seller shall, at its own expense, repair or replace any defective parts. After the warranty period, the Seller shall provide necessary after-sales support as agreed upon by both parties.6. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior consent of the other party.7. Force Majeure（不可抗力）Neither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, strikes, government actions, and other events beyond its reasonable control. The affected party shall notify the other party of the occurrence and circumstances of such event within a reasonable time.8. Settlement of Disputes（争议解决）Any dispute arising out of or in connection with this Contract shall be settled through friendly negotiation between bothparties. If no settlement can be reached, either party may submit the dispute to [specify court/arbitration institution] for resolution.9. Miscellaneous（一般条款）This Contract constitutes the entire agreement between the Seller and the Buyer, and no modifications shall be made to it except in writing signed by both parties. This Contract is made in both English and [specify other language if necessary], with equal legal effects. In case of any discrepancies between the two versions, the English version shall prevail.The Seller and the Buyer have fully read and understood this Contract, and agree to be bound by its terms and conditions.Seller: _____________________ (Signature)Date: _____________________ (Date)Buyer: _____________________ (Signature)Date: _____________________ (Date)篇4SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], a company duly organized under the laws of [Seller's Country] (hereinafter referred to as the "Seller"), and [Buyer Name], a company duly organized under the laws of [Buyer's Country] (hereinafter referred to as the "Buyer").I. Parties and Contract ObjectThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A (Product List) to this Contract.II. Terms of Payment1. Payment shall be made by wire transfer to the Seller's account within 30 days of the date of this Contract.2. In case of delay in payment, the Buyer shall pay a penalty of [specific percentage/amount] of the total contract value for each week of delay.III. Delivery1. The Seller shall deliver the products listed in Annex A to the Buyer at the agreed place and date specified in the Product List.2. Any delay in delivery shall be notified to the Buyer in writing immediately upon occurrence and confirmed by wire or cable within three days.IV. Quality and Inspection1. The Seller shall ensure that the products are of the quality and specifications agreed upon by both parties.2. The Buyer shall have the right to inspect the products during production and prior to shipment.3. If any product fails to meet the agreed specifications, the Seller shall replace such product or refund the cost of such product to the Buyer at the Seller's option.V. Warranty and Claims1. The Seller guarantees that all products sold to the Buyer are free from defects in material and workmanship for a period of [specific period] from the date of delivery to the Buyer.2. If any product is found to be defective during this period, the Seller shall replace such product or refund the cost of such product to the Buyer at the Seller's option.3. Any claim by the Buyer must be made in writing within [specific period] after receipt of the products and must be accompanied by evidence of defect.VI. Force MajeureNeither party shall be liable for any failure to perform its obligations due to causes beyond its reasonable control, such as fire, earthquake, flood, act of war or government action, etc. However, the affected party shall notify the other party immediately upon occurrence of such event and provide evidence thereof as soon as possible.VII. TerminationThis Contract may be terminated by either party giving written notice to the other party if there is a material breach of contract by the other party which is not cured within [specific period] after receipt of such notice.VIII. General Provisions篇5Sales ContractContract No. [Contract Number]Date of Contract: [Date]Seller:[Seller Full Name][Seller Address][Seller Country]Buyer:[Buyer Full Name][Buyer Address][Buyer Country]In consideration of the mutual promises and conditions set forth herein, the Seller agrees to sell and the Buyer agrees to purchase the following products under the terms and conditions stated below:Article or Products: [Description of the product or items being sold, including model numbers, specifications, quantity, etc.]Price and Payment: The total price for the Products shall be [Total Price in figures and currency]. The payment shall be made as follows: [Payment terms and conditions, including payment methods, due dates, and any deposit or installments.]Delivery: The Products shall be delivered at [Delivery Point Address] on or before [Delivery Date]. The risk of loss or damage to the Products shall pass to the Buyer upon delivery.Terms of Shipment: Shipping shall be arranged by [either party] and the choice of shipping method shall be agreed upon by both parties. Shipping documents will be provided by the Seller to the Buyer. The costs and risks related to shipping shall be borne by [specify which party bears the costs].Quality and Inspection: The Products shall conform to the quality standards specified in this Contract. The Buyer shall have the right to inspect the Products during production and prior to shipment. If any defects are found, the Seller shall promptly rectify or replace the Products as per the agreement.Warranty and Guarantee: The Seller guarantees that the Products are free from defects in material and workmanship and are in conformity with the specifications mentioned in this Contract. Any defects discovered within a period of [Warranty Period] shall be rectified or replaced at no additional cost to the Buyer.Force Majeure: Neither party shall be liable for failure to perform any obligation under this Contract due to events beyond their reasonable control, such as acts of war, riots, strikes, lockouts, government intervention, acts of God, etc. In such cases, the affected party shall promptly notify the other party of the situation and take reasonable measures to minimize its impact on the Contract.Confidentiality: Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall continue even after the termination of this Contract.Liability: If any party fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the other party due to such failure. The liability of either party shall be limited to the maximum extent possible under applicable law.Disputes Resolution: Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/tribunal] for resolution.Miscellaneous: This Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the Products specified herein and no modifications or amendments shall be valid unless agreed upon in writing by both parties. This Contract is made out in [Country/State] laws.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Contract on the dates set below:Seller: _____________________ Date: ________________Buyer: _____________________ Date: ________________(Signature of Seller) (Signature of Buyer)(Date of Signature) (Date of Signature)(Stamp if applicable) (Stamp if applicable)篇6SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [Date], between [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [describe the product, its specifications, quantity, and any other relevant details].2. Price and Payment2.1 The total price for the goods specified in this Contract is USD [___] (say United States Dollars ___ only).2.2 Payment shall be made in United States Dollars (USD) through [specify payment method such as wire transfer, PayPal, etc.]2.3 The Buyer shall make payment within [specify timeframe,e.g., 30 days from the date of signing this Contract].3. Delivery3.1 The Seller shall deliver the goods to the Buyer at [delivery location].3.2 The delivery shall be completed within [specify timeframe, e.g., 60 days from the date of receiving full payment].4. Quality and Inspection4.1 The Seller shall ensure that the goods are in accordance with the specifications mentioned in this Contract.4.2 The Buyer has the right to inspect the goods during production and prior to delivery.5. Risk and Ownership5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery.5.2 Ownership of the goods shall pass to the Buyer upon full payment by the Buyer.6. Warranty and售后服务(After-sales Service)6.1 The Seller provides a warranty of [specify duration, e.g., 1 year] for the goods against any manufacturing defects.6.2 The Seller shall provide necessary after-sales service and support as per the Buyer's requirements.7. Force MajeureIf either party is prevented from fulfilling its obligations due to force majeure events, it shall notify the other party immediately and provide evidence of such occurrence. The affected party shall strive to overcome the situation as soon as possible.8. ConfidentialityBoth parties shall maintain confidentiality of all information shared during the performance of this Contract, unless otherwise agreed or required by law.9. TerminationThis Contract may be terminated by either party in case of breach by the other party, provided that a written notice is given to the other party specifying the reasons for termination.10. Dispute ResolutionAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify arbitration institution or court] for resolution.11. General Provisions11.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.11.2 This Contract is made in duplicate, one for each party, and shall be valid from the date of signing until fully performed by both parties. If there are any contradictions between this Contract and any other document, this Contract shall prevail.SIGNED BY BUYER: ____________________________ DATE:_____________ 买家签名：______________________ 日期：_________________ __________ （此处可附上买方签名及日期）Seller Name （此处填写卖方名称）：Signature （此处填写卖方签名）：Date （此处填写日期）：______ _________ （此处可附上卖方签名及日期）兹签字盖章以示确认本合同。

中英文销售合同7篇篇1甲方（卖方）：_____________联系方式：_____________地址：_____________公司名称及法律形式：_____________公司营业范围及经营资质：营业执照所载范围的经营资格。

合法授权签署本协议资格及开展协议规定相关活动的权利能力。

若因甲方不具备前述资格和能力而导致本协议无法履行或履行不当所产生的所有责任均由甲方承担。

乙方（买方）：_____________联系方式：_____________地址：_____________一、CONTRACTING PARTIES （合同双方）二、Terms and Clauses （合同条款）篇2销售合同（Sales Contract）甲方（卖方）：___________ （以下简称“卖方”）乙方（买方）：___________ （以下简称“买方”）鉴于买方愿意购买卖方所提供的商品，双方本着平等、自愿、互利的原则，经友好协商，达成如下协议：一、商品描述及规格（一）商品描述商品名称：___________型号/规格：___________品牌：___________质量及标准：按照双方约定标准及国家相关标准执行。

（二）数量及单价商品数量：___________单价（含包装费用）：___________ （货币单位）总价：根据商品数量与单价计算得出。

二、交货条款（一）交货期限卖方应在合同签署后的___天内完成交货。

（二）交货地点双方约定的交货地点为___________。

（三）运输方式及费用承担运输方式：___________；费用承担：___________。

三、付款条款（一）付款方式付款方式为___________（如：电汇、信用证等）。

（二）付款时间买方在收到货物并确认质量无误后___天内完成付款。

四、质量保证及售后条款卖方应保证所售商品的质量符合约定，并承担售后服务责任。

详细内容见附加协议。

五、违约责任如双方中的任何一方违反本合同的任何条款，违约方需承担相应的法律责任。

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer's Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods including item number, name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Origin of Goods].Article 3: Price and PaymentThe total price of the goods shall be [Total Price]. The payment shall be made in [Currency] through [Payment Method] within [Payment Period].Article 4: Terms of DeliveryThe delivery of the goods shall be made by [Delivery Method] at the port of [Port of Delivery]. The risk of loss or damage shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods before and after delivery. If any defects are found, the Seller shall promptly rectify or replace the goods.Article 6: Packing and MarkingThe goods shall be properly packed and marked in accordance with the usual practices for transportation. The Seller shall bear all costs related to packing and marking.Article 7: Delay and Force MajeureArticle 8: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [Warranty Period] for the goods. During this period, any defects in material or workmanship shall be rectified by the Seller without additional charge to the Buyer. The Seller shall also provide after-sales service as agreed upon by both parties.Article 9: DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Dispute Resolution Mechanism] for arbitration or legal proceedings.Article 10: General ProvisionsIn witness whereof, the Seller and the Buyer have signed this contract at [Place] on [Date].Seller: _________________________ (Company Name & Signature)Buyer: _________________________ (Buyer's Name & Signature)Date: _________________________Place: _________________________(Note: This is a template Sales Contract and should be used as a reference only. It is recommended to consult with legal professionals for advice on specific terms and conditions.)篇2SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the goods specified in Annex A (Product Description and Quantity) to this Contract.2. Price and Payment2.1 The Price of the goods shall be as stated in Annex A. The Price shall be paid in the currency specified in Annex B (Payment Terms).2.2 Payment terms are specified in Annex B and shall be strictly adhered to by both parties.3. Delivery and Quality Assurance3.1 Delivery of the goods shall be made according to the terms specified in Annex C (Delivery Terms).3.2 The Seller guarantees that the goods shall be of the quality as described in Annex D (Quality Assurance) and shall comply with all applicable laws and regulations in the country of destination.4. Terms of Delivery and Risk Transfer4.1 The risk of loss or damage to the goods shall pass to the Buyer upon delivery as specified in Annex C.5. Warranty and After-Sales Service5.1 The Seller shall provide a warranty for the goods as specified in Annex E (Warranty and After-Sales Service).6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract, except for information that is already in the public domain or obtained through lawful means.7. Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, war, riots, or other events beyond their reasonable control.8. Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party that is not cured within a reasonable period of time.9. Dispute Resolution9.1 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If no settlement can be reached, the dispute shall befinally settled by arbitration in accordance with the rules of [Arbitration Institution].10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.10.2 This Contract is written in both English and [other language(s)], with the English version prevailing in case of any discrepancies.10.3 The laws of [Country] shall apply to this Contract.In Witness Whereof, the parties have executed this Contract in duplicate originals, each party retaining one original for their records.Seller: ____________________ (Authorized Representative)Date: ________Buyer: ____________________ (Authorized Representative)Date: ________篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and concluded on __ DATE __ between Seller: __NAME OF SELLER__ (hereinafter referred to as "Seller") and Buyer:__NAME OF BUYER__ (hereinafter referred to as "Buyer").1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the following products (hereinafter referred to as "Products"): __PRODUCT DESCRIPTION AND SPECIFICATIONS__.2. Terms of Payment2.1 The total contract value is __CONTRACT VALUE__. The Buyer shall make payment through __PAYMENT METHOD__.2.2 The payment terms are as follows:* A deposit of __PERCENTAGE OF DEPOSIT__ is to be paid within __TIME FRAME__ after signing this Contract.* The balance of the payment shall be made upon the delivery of Products and acceptance by the Buyer.3. Delivery and Shipping3.1 The Products shall be delivered to the Buyer at__SHIPPING ADDRESS__.3.2 The delivery date is __DELIVERY DATE__. The Seller shall inform the Buyer promptly if there is any delay in delivery.4. Quality Assurance4.1 The Seller guarantees that the Products shall be in conformity with the following specifications and quality standards: __PRODUCT SPECIFICATIONS AND QUALITY STANDARDS__.4.2 If the Products fail to meet the specified quality standards, the Buyer shall have the right to reject the Products or claim compensation.5. Warranty and After-Sales Service5.1 The Seller provides a warranty period of __WARRANTY PERIOD__ for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge.5.2 The Seller shall provide after-sales service in accordance with the terms and conditions agreed upon by both parties.6. Risks and Liabilities6.1 Risk of loss or damage to the Products passes to the Buyer upon delivery. However, if the Products are lost or damaged during transportation, the Seller shall be responsible for making good the loss or damage.6.2 Neither party shall be liable for any failure to perform its obligations due to force majeure events, such as natural disasters, wars, riots, etc.7. Confidentiality7.1 Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. Settlement of Disputes8.1 Any disputes arising from or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute may be submitted to arbitration at __ARBITRATION PLACE__ in accordance with __ARBITRATION RULES__.9. Force of Law and Jurisdiction9.1 This Contract shall be governed by and construed in accordance with the laws of __COUNTRIES/JURISDICTIONS__.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.10.2 This Contract is made in __NUMBER OF COPIES__ copies, each copy having equal legal effect.10.3 If any provision of this Contract is invalid or unenforceable, it shall not affect the validity and enforceability of the remaining provisions.The parties have read and understood all the terms and conditions stated above and have signed this Contract in witness thereof:Seller:Name: __NAME OF SELLER__Signature: ________________________Date: __DATE__Buyer:Name: __NAME OF BUYER__Signature: ________________________Date: __DATE__篇4SALES CONTRACTThis Sales Contract is made on [合同生效日期] by and between [卖方全称及注册地址], a legal entity duly organized under the laws of [卖方所在国家名称], hereinafter referred to as "Seller" and [买方全称及注册地址], a legal entity duly organized under the laws of [买方所在国家名称], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [商品名称及规格] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the commodity shall be fixed at [商品定价].2.2 Payment shall be made by [支付方式，例如：T/T电汇，L/C信用证等]. Details are as follows: [支付细节及时间表].3. DeliveryThe Seller shall deliver the goods to the port of [交货港口] no later than [最晚交货日期].4. Quality and Inspection4.2 The Buyer shall have the right to conductinspection/supervision of the goods during production process at Seller's factory at any time after receiving a written request from Seller. Details of such inspection shall be agreed mutually by both parties.5. Risk and Transfer of OwnershipThe risk of loss or damage to the goods shall be borne by the Seller until delivery of the goods to the port of destination specified in Article 3 above, at which point ownership shall pass to the Buyer.6. Packing and Shipping Marks7. Insurance8. Warranty and Claims篇5SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and Buyer shall be identified as per the signatures at the end of this Contract.Article 2: Product DescriptionThe Product to be sold is [describe the product clearly]. Additionally, any relevant specifications, dimensions, or other necessary information must be stated clearly in this section.Article 3: Quantity and Unit PriceThe Seller agrees to sell and the Buyer agrees to purchase [quantity] of the Product, with a unit price of [unit price].Article 4: Terms of Payment4.1 Payment shall be made within [specify the time period,e.g., 30 days] after the date of receipt of invoice.4.2 The mode of payment shall be [specify the mode, e.g., T/T (Telegraphic Transfer) or L/C (Letter of Credit)].4.3 In case of L/C, the Buyer shall open an irrevocable L/C in favor of the Seller.Article 5: Delivery5.1 The Product shall be delivered at [delivery location].5.2 The delivery shall be made within [specify the time period].5.3 Any delay in delivery shall be notified to the Buyer in advance.Article 6: Quality AssuranceThe Seller guarantees that the Product shall be in accordance with the specifications mentioned in Article 2 and shall be free from any defects in material and workmanship.Article 7: WarrantyThe Seller provides a warranty for the Product as follows: [describe the warranty terms].Article 8: Force MajeureIn case of force majeure events, both parties shall be relieved from their obligations under this Contract to the extent of such events.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: LiabilitiesIn case of any breach of Contract by either party, the other party shall have the right to claim damages.Article 11: DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify the court or arbitration institution] for resolution.Article 12: Miscellanea篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer Name] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products, including name, specifications, quantity, and agreed-upon unit price].2. Terms of PaymentPayment shall be made in advance by [Method of Payment] (e.g., wire transfer, credit card, etc.) within [Time Limit] from the date of the Contract. A copy of the bank receipt as evidence of payment shall be promptly sent to the Seller after payment.3. Delivery and ShippingThe Seller shall deliver the products to the Buyer at the agreed quantity and quality within [Delivery Timeframe]. Shipping shall be arranged by the Buyer at the Buyer's cost. Any delay in delivery due to reasons beyond the Seller's control shall be promptly notified to the Buyer.4. Quality AssuranceThe Seller guarantees that the products shall be in accordance with the agreed specifications and free from any defects in material and workmanship. Should any defects be found, the Seller shall promptly replace or repair such products at no additional cost to the Buyer.5. Warranty and Liabilities6. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, earthquakes, floods, fires, etc. Should such events occur, the affected party shall promptly notify the other party of the situation and its impact on performance.7. ConfidentialityBoth parties shall maintain confidentiality of any information related to this Contract that is not intended for public disclosure. Such information includes business secrets, technical data, pricing, and other confidential matters agreed upon by both parties.8. TerminationThis Contract may be terminated by either party in case of default by the other party that cannot be rectified within areasonable period of time. Any termination must be notified to the other party in writing and shall be effective upon receipt of such notification.9. Law and Jurisdiction10. Miscellaneous。

外贸销售合同英文版7篇篇1Foreign Trade Sales ContractContract Number: [Insert Contract Number]Date of Contract: [Insert Date]Seller:Name of Company: [Insert Seller’s Company Name] Address: [Insert Seller’s Address]Country: [Insert Seller’s Country]Buyer:Name of Company: [Insert Buyer’s Company Name] Address: [Insert Buyer’s Address]Country: [Insert Buyer’s Country]In consideration of the mutual promises and conditions set forth below, the Seller and the Buyer agree to enter into this Foreign Trade Sales Contract:Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the following products: [Insert detailed list of products, including product name, specifications, quantity, and unit price].Article 2: DeliveryThe Seller shall deliver the products to the Buyer at the following location: [Insert delivery location]. The delivery date shall be no later than [Insert delivery date].Article 3: PaymentThe Buyer shall make payment in full via [Insert agreed payment method (e.g., T/T transfer, L/C, etc.)]. Payment terms shall be as follows: [Insert payment terms (e.g., 30% advance, balance against delivery, etc.)].Article 4: Quality and InspectionThe Seller shall ensure that the products are of the agreed quality. The Buyer shall have the right to conduct inspectionsupon receipt of the products. If any defects are found, the Seller shall be responsible for rectifying or replacing the products.Article 5: Force MajeureArticle 6: WarrantyThe Seller guarantees that the products are free from any defects in material and workmanship and agrees to replace or repair any defective products, at its option, within a period of [Insert warranty period] from the date of delivery to the Buyer.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall survive the termination of this Contract.Article 8: Liability for Breach of ContractIf any party fails to perform its obligations under this Contract, the non-breaching party may claim compensation for any losses incurred. If such breach is fundamental, thenon-breaching party may terminate this Contract.Article 9: Law and JurisdictionArticle 10: MiscellaneousIN WITNESS WHEREOF, the Seller and the Buyer have signed this Contract in [Insert number] counterparts, each party retaining one counterpart.Seller: _____________________ Date: _________________(Signature of Seller) (Date of Signature)Buyer: _____________________ Date: _________________(Signature of Buyer) (Date of Signature)Note: This is a legal document and should be reviewed by legal counsel before execution. The above terms are subject to negotiation and may be modified as per the parties’ agreement.篇2合同编号：__________甲方（卖方）：____________________地址：_____________________________乙方（买方）：____________________地址：_____________________________鉴于甲方同意向乙方销售以下商品，乙方同意按照本合同规定的条款和条件购买该商品，双方经友好协商，达成如下协议：一、商品描述1. 商品名称：____________________2. 型号/规格：____________________3. 数量：____________________4. 单价：____________________5. 总价：____________________6. 付款方式：____________________7. 交货期限：____________________8. 交货方式：____________________9. 运输方式：____________________10. 目的地：____________________二、商品质量保证1. 甲方保证所销售的商品均为正品，并符合合同规定的规格和质量要求。

销售合同英文版5篇全文共5篇示例，供读者参考篇1Sales ContractThis Agreement is made on this [date] day of [month, year], between [Vendor Company], hereinafter referred to as the "Seller" and [Buyer Company], hereinafter referred to as the "Buyer."1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [detailed description of goods, including quantity, quality, and any specifications]. The goods shall be delivered to the Buyer at [delivery address] on or before [delivery date].2. Price: The price for the goods shall be [amount] per [unit of measurement]. The total purchase price shall be [total amount]. Payment shall be made by the Buyer in [payment method] on or before [payment due date].3. Delivery: The Seller shall deliver the goods to the Buyer at the agreed-upon delivery address on or before the delivery date.The Buyer shall be responsible for any shipping or transportation costs associated with the delivery of the goods.4. Acceptance: The Buyer shall inspect the goods upon delivery and shall have [number of days] days to notify the Seller of any defects or non-conformity. Failure to notify the Seller within this time frame shall constitute acceptance of the goods.5. Warranty: The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery. If any defects are discovered within this period, the Seller shall replace or repair the goods at no additional cost to the Buyer.6. Governing Law: This Agreement shall be governed by the laws of [jurisdiction]. Any disputes arising under this Agreement shall be resolved through arbitration in [city, state].7. Entire Agreement: This Agreement constitutes the entire understanding between the parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Agreement as of the date first above written.Seller: ________________________Buyer: ________________________Signed and sealed in the presence of:Witness: ________________________篇2Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of Goods: The Seller agrees to sell, transfer, and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of Goods: [insert description]- Quantity: [insert quantity]- Price: [insert price]2. Delivery: The Seller shall deliver the Goods to the Buyer's designated location at the Buyer's expense. The Goods shall be delivered in good condition and in accordance with the specifications set forth in this Contract.3. Payment: The Buyer shall pay the Seller the total purchase price of the Goods, as set forth in this Contract, in [currency] within [number] days of the delivery of the Goods. Payment shall be made by [payment method].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Buyer determines that the Goods are not in conformity with the specifications set forth in this Contract, the Buyer may reject the Goods and the Seller shall promptly replace the Goods at no additional cost to the Buyer.5. Warranties: The Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications set forth in this Contract. The Seller further warrants that the Goods are fit for the purpose for which they are intended.6. Limitation of Liability: The Seller's liability under this Contract shall be limited to the purchase price of the Goods. In no event shall the Seller be liable for any incidental, consequential, or punitive damages.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire Agreement: This Contract constitutes the entire agreement between the Seller and the Buyer with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: [Name]Buyer: [Name]__________________________________________________________Signature of SellerSignature of Buyer【以上是关于销售合同的英文版文档，供参考】篇3Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller], with a registered address at [Seller's Address], and [Buyer], with a registered address at [Buyer's Address], on [Date].1. Sale of Goods1.1 Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price2.1 The purchase price for the Goods shall be [Amount] (the "Purchase Price"), payable by Buyer to Seller in [Currency] within [Number] days of the delivery of the Goods.3. Delivery3.1 Seller shall deliver the Goods to Buyer at the location specified in Exhibit B on or before [Date]. Buyer shall be responsible for all shipping costs associated with the delivery of the Goods.4. Inspection and Acceptance4.1 Buyer shall have [Number] days from the date of delivery to inspect the Goods. If the Goods do not conform to the specifications set forth in Exhibit A, Buyer may reject the Goods by providing written notice to Seller within such [Number]-day period.5. Warranties5.1 Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship.6. Limitation of Liability6.1 Seller's liability under this Contract shall be limited to the Purchase Price of the Goods.7. Governing Law7.1 This Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Dispute Resolution8.1 Any dispute arising out of or relating to this Contract shall be resolved through arbitration in accordance with the rules of the American Arbitration Association.9. Entire Agreement9.1 This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller] [Buyer]Signature:___________________ Signature:__________________Print Name:___________________ Print Name:_________________Title:________________________ Title:_____________________Exhibit A - Description of Goods[Description of Goods]Exhibit B - Delivery Location[Delivery Location]篇4Sales ContractThis Sales Contract is made and entered into on this ___ day of ____, 20__ by and between [Seller's Name], with a registered address at [Seller's Address], and [Buyer's Name], with a registered address at [Buyer's Address].1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of the products- Quantity- Price per unit2. Delivery: The Seller shall deliver the products to the Buyer at [Delivery Address] on or before [Delivery Date]. The Buyer shall be responsible for any additional delivery costs.3. Payment: The Buyer shall pay the Seller the total amount of [Total Amount] upon delivery of the products. Payment shall be made in [Currency] via [Payment Method].4. Warranty: The Seller warrants that the products sold under this contract are free from defects in materials and workmanship. Any defects must be reported to the Seller within 30 days of delivery, and the Seller shall replace or repair the defective products.5. Risk of Loss: The risk of loss or damage to the products shall pass to the Buyer upon delivery of the products.6. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Dispute Resolution: Any disputes arising out of or in connection with this Sales Contract shall be resolved through arbitration conducted in [City, State/Country], in accordance with the rules of [Arbitration Association].8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.[Seller's Signature] [Buyer's Signature][Seller's Name] [Buyer's Name]篇5Sales ContractThis Sales Contract (“Contract”) is entered into on [date] by and between [Seller], with its principal place of business at [address] (“Seller”), and [Buyer], with its principal place of business at [address] (“Buyer”).Witnesseth:1. Sale of Goods: Seller agrees to sell, transfer and deliver to Buyer, and Buyer agrees to purchase and receive from Seller, the goods described in Exhibit A attached hereto (the “Goods”).2. Price and Payment: The purchase price for the Goods shall be [amount] per unit, for a total purchase price of [total amount].Buyer shall pay Seller the total purchase price upon signing this Contract.3. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Seller shall bear all costs and expenses related to the delivery of the Goods to Buyer.4. Warranty: Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery. In the event the Goods do not conform to the specifications or are defective, Buyer may return the Goods to Seller for a full refund.5. Inspection and Acceptance: Buyer shall have [inspection period] days from the date of delivery to inspect the Goods and determine whether they conform to the specifications. If Buyer finds any defects or non-conformities, Buyer shall notify Seller in writing within the inspection period. If Buyer does not notify Seller within the inspection period, Buyer shall be deemed to have accepted the Goods.6. Force Majeure: Neither party shall be liable for any delay or failure to perform its obligations under this Contract due to circumstances beyond its reasonable control, such as strikes, riots, acts of God, or government regulations.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first written above.[Signature of Seller] [Signature of Buyer]Name: Name:Title: Title:Date: Date:。

英文销售合同8篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller Name], with its principal place of business located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], with its principal place of business located at [Buyer Address] (hereinafter referred to as the "Buyer").1. Scope of Contract:The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached hereto, in the quantities specified, at the prices agreed, and in accordance with the terms and conditions stipulated below.2. Product Description:The products to be sold under this Contract are described in Annex A, including but not limited to specifications, quality,quantity, and packaging. The Seller shall ensure that the products comply with the descriptions set out in Annex A.3. Price and Payment:3.1 The price of the products shall be as stated in Annex A. The Seller shall not increase the price during the term of this Contract without the prior written consent of the Buyer.3.2 Payment shall be made through the payment method specified in Annex B, which is attached to this Contract and made a part of it. The Seller shall ensure proper receipt of payment as per the terms specified in Annex B.4. Delivery:4.1 The Seller shall ensure timely delivery of the products to the place specified by the Buyer as per Annex C attached hereto.4.2 In case of delay in delivery, the Seller shall promptly notify the Buyer and shall compensate for any losses incurred by the Buyer due to such delay.5. Quality Assurance:5.1 The Seller shall ensure that the products are manufactured in accordance with the quality standards specified in Annex A.5.2 If any product does not meet the specified quality standards, the Seller shall replace such product or refund the cost at its sole discretion.6. Warranty:The Seller warrants that all products sold to the Buyer are free from defects in material and workmanship under normal use for a period of [duration] from the date of delivery to the Buyer. During this period, any product found to be defective shall be replaced or refunded at the Seller's sole discretion.7. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract that is not intended for public disclosure. This includes but is not limited to product specifications, pricing, and business strategies.8. Force Majeure:Neither party shall be liable for failure or delay in performance due to causes beyond its reasonable control, including but not limited to acts of nature, war, terrorism, riots, or civil commotion.9. Termination:This Contract may be terminated by either party giving a written notice to the other party if there is a material breach of any term or condition of this Contract which is not cured within a reasonable period of time.10. Jurisdiction and Law:This Contract shall be governed by and interpreted in accordance with the laws of [Country/State]. Any dispute arising out of or in connection with this Contract shall be submitted to [specific court/tribunal] located in [specific place] for resolution.11. Miscellaneous:11.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed upon by both parties in writing.11.2 This Contract may not be assigned or transferred by either party without the prior written consent of the other party.11.3 Any notice required or permitted under this Contract shall be given in writing and shall be deemed given when delivered personally or sent by email/registered mail/courierservice to the address specified in this Contract or notified by either party.In witness whereof, the parties have executed this Contract as of the date first written above.Seller: _____________________ (Signature) Date: ________ (Date)Buyer: _____________________ (Signature) Date: ________ (Date)附件A: 产品清单及规格附件B: 支付条款和条件附件C: 交付条款和条件…… 其他附件可继续添加以满足特定需求。