KPS 1910Z19W说明书(硬件篇)

Philips 3000 seriesLCD TV with LEDbacklight with DigitalCrystal Clear Array 19"HD Ready19PFL3130Clearly a smart choicePhilips brings a LCD TV of excellent quality at an affordable priceGreat sound quality•Incredible Surround for enhanced audio enjoyment•3W per channel stereo with Dynamic Bass EnhancementEasy connectivity•USB for MP3 music playback and JPEG photo viewerEasy to use•HDMI-ready for top quality, multimedia experienceGood picture quality•Digital Crystal Clear provides vivid cinema-like images•PMR 100Issue date 2019-06-18Version: 6.0.112 NC: 8670 000 99599EAN: 69 52897 20111 1© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective SpecificationsLCD TV with LED backlight19" HD ReadyHighlightsUSB (multimedia)The USB multimedia connector allows direct access to JPEG photos, MP3 music without the requirement of PC. Plug your USB device directly into themonitor and start enjoying your favourite music or Photos with the help of the on-screen user friendly content browser which is easily accessible via supplied Remote Control.2x3 W RMS audio powerIn audio, the more the watts, the louder the sound. 2x refers to stereo speakers,with 3 watts perspeaker. 3 watt RMS amplification is considered very good for a TV setDigital Crystal ClearDigital Crystal Clear is a package of picture innovations that digitally adjusts and optimizes picture quality to optimal contrast, color andsharpness levels. It's like watching vivid cinema-like images.PMR 100Combining the refresh rate of the panel and unique image processing, 100Hz Perfect Motion Rate (PMR) creates extreme motion sharpness for clear andvibrant images even with fast on-screen motion.Picture/Display•Aspect ratio: 16:9 widescreen•Diagonal screen size: 19 inch / 48 cm•Display screen type: Active Matrix LCD, HD / LED •Panel resolution: 1366 x 768•Picture enhancement: 2D/3D noise reduction, 3/2 - 2/2 motion pull down, 3D Combfilter, Digital Noise Reduction, Dynamic contrast enhancement, Sharpness Adjustment, Color Enhancement, Progressive scan•Screen enhancement: Anti reflex coated glassSupported Display Resolution•Computer formats Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1360 x 768 60Hz •Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50, 60Hz 1080i 50, 60HzSound•Output power (RMS): 2x3W•Sound Enhancement: Auto Volume Leveller, Incredible Surround•Sound System: Mono, StereoConvenience•Child Protection: Child Lock+Parental Control •Clock: Sleep Timer•Ease of Installation: Autostore, Fine Tuning, PLL Digital Tuning•Ease of Use: Auto Volume Leveller (AVL), On Screen Display, Side Control, Smart Picture, Smart Sound•On-Screen Display languages: English, Simplified Chinese•Remote control: TV remote control•Screen Format Adjustments: 4:3, Zoom 1, Zoom 2,Widescreen, Original(under PC mode only)Multimedia Applications•Multimedia connections: USB•Playback Formats: Photo(JPEG), MP3Tuner/Reception/Transmission•Aerial Input: 75 Ohms (IEC type) (Rear)•Number of Preset Channels: 200•Tuner bands: UHF, VHF•TV system: PAL B/G, PAL D/K, PAL I, NTSC M, SECAM D/K•Video Playback: Multi-systemConnectivity•TV antenna: 75 Ohms (IEC type) (Rear)•HDMI 1:HDMI v1.3(Rear)•Component Video 1: YPbPr + L/R audio (Rear)•AV 1: CVBS with audio L+R (Rear)•PC input: D-sub (Rear), 3.5mm mini audio jack(Rear)•USB: USB2.0x1 (Side)Power•Ambient temperature: 5 °C to 45 °C •Mains power: 180-240V; 50/60Hz •Power consumption: 35 W•Standby power consumption: <0.5WDimensions•Box dimensions (W x H x D): 509 x 401 x 108 mm•Compatible wall mount: VESA 75x75 mm •Product weight: 2.77 kg•Product weight (+stand): 2.85 kg•Set dimensions (W x H x D): 453 x 303 x 38 mm •Set dimensions with stand (W x H x D): 453 x 343 x 129 mm•Weight incl. Packaging: 3.32 kgAccessories•Included accessories: 2 x AAA Batteries, Power cord, Remote Control, Table top stand, User Manual, Warranty Leaflet, Quick start guide •User Manual: Simplified Chinese。

Industrial ScannersGranit 1910iIndustrial-Grade Area-Imaging ScannerThe Granit™ 1910i industrial-grade area-imaging scanner isdesigned to withstand the varied demands that exist in harsh working environments. Featuring a custom-built housing that is redefining the standard for scanner reliability, the IP65-rated Granit 1910i scanner is built to survive 5,000 1 m (3.3 ft) tumbles and 50 drops to concrete from 2 m (6.5 ft), even at -30°C (-22°F). As a result, businesses deploying this industry-leading offering can expect to experience minimal device downtime and a lower overall cost of ownership. Powered by sixth-generation Honeywell Adaptus™ imaging technology and its revolutionary decoding architecture, the Granit 1910i scanner provides users with the same exceptional barcode reading performance as the best-in-class Xenon™ series of area-imaging scanners. From poorly printed and damaged codes to low-density linear codes, the Granit 1910i scanner is built to read virtually all barcodes with ease – supporting maximum operator productivity with its enhanced illumination, crisp laser aiming and extended depth of field.Additionally, loud machinery and poor lighting conditions often pose a challenge for operators who rely on scanner feedback as confirmation of “good reads.” The Granit 1910i scanner meets this challenge with bright LEDs, enhanced beeper volume and vibrating feedback response – ensuring rapid decode feedback and eliminating redundant scanning. Created specifically for applications in which high-performance scanning is expected and durability is highly valued, the Granit 1910i scanner is the optimal solutionfor businesses operating in unpredictable conditions.The Granit 1910i scanner delivers class-leading durability and exceptional performance for demanding, arm's length scanning of 1D and 2D barcodes.F E AT U R E S & B E NE F I T SThe custom-built IP65-rated housing is able to withstand 5,000 1 m (3.3 ft) tumbles and survive 50 drops from 2 m (6.5 ft) at -30°C (-22°F), reducing servicecosts and increasing device uptime.Adaptus 6.0 imaging technology provides aggressive barcode reading and unrivaled accuracy, while the scanner feedback is enhanced for use in extreme industrial environments.The TotalFreedom™ area-imagingdevelopment platform enables the loading and linking of multiple applications to enhance image decoding, data formatting and image processing – eliminating the need for host system modifications.With outstanding performance on poor-quality and damaged barcodes, the scanner helps users maintain productivity byproviding a worry-free scanning solution that minimizes manual entry.Scans out-of-reach items with ease and allows users to scan 20 mil linear codes out to 75 cm (29.5 in) without sacrificing performance on 2D codes.Granit 1910i Technical SpecificationsGranit 1910i Data Sheet | Rev C | 02/17© 2017 Honeywell International Inc.For more informationHoneywell Safety and Productivity Solutions9680 Old Bailes Road Fort Mill, SC 29707800-582-4263For a complete listing of all compliance approvals and certifications, please visit /compliance . For a complete listing of all supported barcode symbologies, please visit / symbologies .Adaptus, Granit, TotalFreedom andXenon are trademarks or registered trademarks of Honeywell International Inc. in the United States and/or other countries.All other trademarks are the property of their respective owners.MECHANICALDimensions (L x W x H): 133 mm x 75 mm x 195 mm (5.2 in x 2.9 in x 7.6 in)Weight: 300 g (10.6 oz)ELECTRICALInput Voltage: 4.0V DC to 5.5V DCOperating Power: 2.35 W (470 mA @ 5V DC)Standby Power: 0.5 W (100 mA @ 5V DC)Host System Interfaces: USB, Keyboard Wedge, RS-232 TTL ENVIRONMENTALOperating Temperature*: -30°C to 50°C (-22°F to 122°F)Storage Temperature: -40°C to 70°C (-40°F to 158°F)Humidity: Up to 95% relative humidity, non-condensingDrop: Designed to withstand 50 2 m (6.5 ft) drops to concrete at -30°C (-22°F)Tumble: 5,000 1 m (3.3 ft) tumbles Environmental Sealing: IP65Light Levels: 0 to 100,000 lux (9,290 foot-candles)ESD: ±20 kV air discharge, ±8 kV contact discharge SCAN PERFORMANCEScan Pattern: Area Imager (838 x 640 pixel array)Motion Tolerance: Up to 610 cm/s (240 in/s) at 16.5 cm (6.5 in) and 381 cm/s (150 in/s) at 25 cm (10 in) for 13 mil UPCScan Angle: ER Focus: Horizontal: 31.6°; Vertical: 24.4°Symbol Contrast: 20% minimum reflectance difference Pitch, Skew: 45°, 65°Warranty: Three-year factory warranty* With industrial-grade cable ordered separately.* Performance may be impacted by barcode quality and environmental conditions. ** Data Matrix (DM)。

PhilipsWireless HD AV ConnectSWW1810Set your HDTV freePlace your HDTV and HD Components the way you want The universal solution that delivers wireless High Definition TV quality, while respecting your home decor. The SWW1810 delivers 1080p/60 picture and digital audio quality. With HDMI-CEC compliance, you can easily control most devices.Enjoy perfect digital Entertainment without wires•Delivers 1080p/60 resolutionPlug and play•No setup required•Plug it in and turn it on!Works with all your HD receivers and HD players•2 HDMI inputs for full digital HD connection in one cable•Wirelessly connect Blu-ray GameConsole, Set-Top box or DVD•EasyLink simplifies control of your devicesPlace your HDTV anywhere in your room•Customize your living room the way you want•Mount the receiver behind your TV with the supplied hardwareSimple to set up•All you need is in the boxIssue date 2017-04-04Version: 1.1.612 NC: 8670 000 67769UPC: 6 09585 19576 9© 2017 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips N.V.or their respective owners. HighlightsWireless HD AV ConnectSpecificationsWirelessly connect devices Wirelessly connect a Blu-Ray, Game Console, Cable or Satellite Set-Top-Box, DVD and more to your HDTV Delivers 1080p/60Delivers 1080p/60 resolution with no latencyPlug it in and turn it on!Plug it in and turn it on!No setup required The consumer can use the product without the need of software installation, software download or configuration of any kindCustomize your living room Customize your living room the way you wantMount behind your TV Mount the receiver behind your TV with the supplied hardwareEasyLink for device controlEasyLink (HDMI-CEC) simplifies control of your devicesPackaging dimensions •Packaging dimensions (W x H x D): 24.1 x 24.9 x 9.9 cm •Packaging dimensions (W x H x D): 9.5 x 9.8 x 3.9 inch •Nett weight: 1.004 kg •Nett weight: 2.213 lb •Gross weight: 1.486 kg •Gross weight: 3.276 lb •Tare weight: 0.482 kg •Tare weight: 1.063 lb •UPC: 6 09585 19576 9•Number of products included: 1•Packaging type: BoxOuter Carton •Outer carton (L x W x H): 25.4 x 24.9 x 11.2 cm •Outer carton (L x W x H): 10 x 9.8 x 4.4 inch •Nett weight: 1.004 kg •Nett weight: 2.213 lb •Gross weight: 1.637 kg •Gross weight: 3.609 lb •Tare weight: 0.633 kg •Tare weight: 1.396 lb •UPC: 6 09585 19576 9•Number of consumer packagings: 1。

FAX: 86-755-83042572 E-mail:*****************E9 Mini PC Hardware Manual（2015-11-27 V3.0）FAX: 86-755-83042572 E-mail:*****************CatalogueChapter One: Introduction of E9 mini PC (2)1.1 Brief introduction of E9 (2)1.2 What's On Board (3)1.3 Dimensions (100 x 72 mm) (3)1.4 The Functional Instructions E9 Mini PC (4)Chapter Two: The Introduction of Each Part's Circuit (5)2.1 HDMI High-definition Interface (5)2.2 1000M Ethernet Interface (6)2.3 Double-deck USB Interface (7)2.4 I2S Audio Input/output Interface (8)2.5 Power_in Interface (9)2.6 Switch Interface (10)2.7 ON/OFF KEY (10)2.8 MINI-USB Interface (11)2.9 VGA Interface (11)2.10 User Keys (12)2.11 IRDA (13)2.12 Boot Switch (13)2.13 LCD Interface (14)2.14 Camera Interface (15)2.15 Micro SD Card Interface (16)2.16 Debug serial port (16)2.17 RTC Circuit (17)2.18 Extension Interface (17)FAX: 86-755-83042572 E-mail:*****************Chapter One: Introduction of E9 mini PC1.1 Brief introduction of E9E9 is a new quad-core mini PC. Its biggest advantage is that its size is slightly bigger than common used IC card, but it owns interfaces are as rich as computer peripherals. Namely, having an E9, you will have a hand-held mini PC.E9 is the 2nd generation mini PC using Freescale Cortex-A9 I.MX6Q platform. It is mainly used in various kinds of terminal display devices. Its size is 100 x 72 mm, and supports rich interfaces such as FPC, HDMI, VGA, LVDS, UART, USB, OTG, SATA, Micro SD CARD, Camera, 3G, CAN Bus, G-Sensor, Wifi, BlueTooth, Ir, RTC and supports other functional modules for peripheral extension.Launched by Freescale, i.MX6Q is a new generation application processor for consumer electronics, industrial, automobile audio entertainment system and many other fields. It uses ARM Cortex-A9 kernel, 40nm process technology, the maximum operation frequency up to 1.2GHz with ARMv7TM, Neon, VFPV3 and Trustzone support. The processor is 64/32bit bus structure,32/32KB Internal Cache,1M External Cache, and can realize high performance computing capabilities of12000DMIPS (1.2 billion instructions set per second). It is with built-in 3D graphics acceleration engine, 2D graphics acceleration, supports 4096*4096 pixels resolution maximally. Video encoding supports MPEG-4/H.263/H.264 achieving 1080p@30fps;videodecodingMPEG2/VC1/*******************************************************.I.MX6Q is a kind of high-performance, low-power processor. It’s applied to making Handheld ElectronicEquipment, Communication Equipment, Medical Application Equipment, Learning Machine, Notebook, VideoSurveillance Equipment and a variety of Man-machine interface, etc., such as High-definition Games, Wireless GPS Navigation, Mobile Video Playback, Intelligent Control, Instrumentation, Navigation Devices, PDA Devices, Remote Monitoring, Game Development and so on.E9 mini PC is adopted the powerful I.MX6Q chip and lead out most of I.MX6Q functional interfaces, there are various kinds of application interfaces on the board to meet the basic requirements of learning, developing. Just connect the corresponding modules to realize the function you want. With the E9 mini PC, you can create a variety of DIY products as long as having new fresh ideas.E9 mini PC’s best advantages on software is that it supports multi-systems switching when start up, it’s similar to PC boot that you can choose different system to boot. Currently, we provide Ubuntu12.04 and Android 4.2.Using this board with provided software library and finished product, you can realize the functions and meet your needs easily. As long as you have E9, you have a Quad hand-held mini-PC. Through it, you can realize:Simple All-in-one ComputerAuto PCSmart Set-top BoxFAX: 86-755-83042572 E-mail:***************** Cloud Terminal EquipmentAdvertising Multimedia Terminal Equipment1.2 What's On Board1.3 Dimensions (100 x 72 mm)Unit: mm; Position hole outer diameter: Φ5; inner diameter: Φ3.FAX: 86-755-83042572 E-mail:*****************1.4 The Functional Instructions E9 Mini PCChapter Two: The Introduction of Each Part's CircuitNote: This chapter starts from the HDMI interface then one by one according to clockwise. Please find the specific circuit diagram in the related DVD.2.1 HDMI High-definition InterfaceIt supports HDMI v1.4,1080p@30fps high-definition digital output and it can also realize audio video synchronization output. Here, the HDMI interface is the regular 19pins HDMI type A, with width 13.9mm and thickness 4.45mm.FAX: 86-755-83042572 E-mail:*****************2.2 1000M Ethernet InterfaceAs Freescale i.MX6Q has integrated Gigabit Ethernet MAC internally, you just need to connect the PHY chip externally when using. This platform’s Ethernet transceiver uses RTL8211E as Ethernet chip. Currently, it works in Gigabit mode, the card crystal is 25M. Mode can be configured through the resistor R87~R95 (please refer to the Base Board Diagram and RTL8211 Chip Manual for detailed configuration). The development board is configured as Gigabit full-duplex mode by default.The RTL8211E/RTL8211EG is Realtek’s newest network PHY chip, supporting 10Base-T/100Base-TX/1000Base-T, IEEE 802.3 standards. The interface of the main chip MAC is RGMII, which supports Crossover, Detection, Auto-Correction, polarity correction, adaptive equalization, cross-talk, cancellation, echo cancellation and other functions. The platform uses RTL8211E as the network card, it is because RTL8211EG’s package is QFN64, RTL8211E’s package is QFN48, but the price is so different between the two, RTL8211E is cheaper, while RTL8211EG is a little expensive, the main difference is RTL8211EG supports GMII/MII interface, RTL8211E doesn’t. So if you are consider more about the cost control, it is suggested to choseFAX: 86-755-83042572 E-mail:*****************RTL8211E, RTL8211EG’s price is more expensive than RTL8211E by 60~70%.Specially,need to use GMII/MII interface, please use RTL8211EG.This platform Ethernet interface integrates transformer, after connecting the network cable and configuring correctly, you can surf the Internet. The interface is as below:2.3 Double-deck USB InterfaceThe 4-channel USB HOST interface is extended by USB-HUB chip FE1.1S. It is the USB2.0 HUB chip with high performance, low power and cost-effective, it can extend 4-channel HOST output and support hot plug. Through one USB double-deck interface--USB1 and the extended interface—J6, it can extend to 2-channel HOST. It supports external connection ofUSB-WIFI module, USB Bluetooth module, USB mouse & keyboard, U disk and other USB equipment.FAX: 86-755-83042572 E-mail:*****************2.4 I2S Audio Input/output InterfaceI2S Audio Circuit adopts Wolfson Microelectronics audio converter chip--WM8960, which is a low power, high quality stereo coder-decoder, especially designed for portable digital audio applications.WM8960 integrates a complete microphone interface and a stereo headphone driver, as there is no need separate microphone, speaker or headphone amplifiers, which greatly reduces the external component requirements. The advanced digital signal processing realizes the automatic level control of microphone or circuit input.The stereo uses 24-bit sigma-delta analog digital converter (ADC) and digital analog converter (DAC), while using a low power oversampling digital interpolation and decimation filters, as well as a flexible digital audio interface. Master clock can be input directly or generated by the built-in internal phase-locked loop, which supports the most common clock mode.WM8960 operates at analogue supply voltages as low as 2.7V. To save power, the digital core can operate at voltages down to 1.7V. The speaker supplies voltage 5.5V superlatively, and each channel’s output can be 1W8Ω load, other power voltage is up to 3.6V. Different parts of the chip can be turned off by software control. Using 5*5mm 32pins QFN package, it’s ideal for making handheld and portable devices.Diameter 3.5mm Headphone output interface (green):FAX: 86-755-83042572 E-mail:*****************Diameter 3.5mm Microphone input interface (pink):1W8Ω SPK interface: 2Pin white interface, 2.00mm pitch2.5 Power_in InterfaceStandard 5V-2A power adapter input, using 6.8V transient pipe and 2.6V recoverable fuse to protect the overcurrent of the power. In order to ensure the normal use, please use the mating power adapter.FAX: 86-755-83042572 E-mail:*****************2.6 Switch InterfaceJ5 is the reserved power switch interface, using 2.54mm pitch white interface, and you need to let the external switch leads docking when using. Its function is to skip the power management circuit and control the board’s power on or off directly.If you use the J5 as the power switch, it may cause the situation that it can’t be switch off after power on. This is because the application has the software power off. In this case, you need to modify the application to cancel the software control or remove the MOS N1 on the circuit.2.7 ON/OFF KEYK1 is the power switch for the board. It is able to power on or off when pressing in long time (3-5 seconds), and wake-up when pressing in short time (1 second).FAX: 86-755-83042572 E-mail:*****************2.8 MINI-USB InterfaceMini-USB interface will be used as the ordinary USB slave.2.9 VGA InterfaceVGA has the advantages of high resolution, quick display, rich color, etc. And it has already been widely used in colorFAX: 86-755-83042572 E-mail:*****************display filed. i.MX6Q doesn’t support VGA interface in display. Here, it uses LCD to VGA chip-- GM7123C so as to realize the VGA output.The VGA interface on the board is the standard 15pins female connector.2.10 User KeysTwo user keys K3 and K4 are used for increasing or decreasing the volume.FAX: 86-755-83042572 E-mail:*****************2.11 IRDAThe IrDA is using HS0038B miniature infrared receiver. It’s easy to use, low output level, and compatible with TTL and CMOS level, low power consumption, and strong anti-interference capability. Large-screen display with the IrDA remote controller can realize remote control easily.2.12 Boot SwitchJ10 is the system boot mode selection interface; different selection will achieve different boot modes.FAX: 86-755-83042572 E-mail:*****************Note: Put the Board internet interface upward, J10 interface, from left to right, is 1, 2, 3, and 4.2.13 LCD InterfaceThe FPC interface is 40Pin 0.5mm pitch down renovate interface. Its interface definition matches with all LCD display from Embedsky. And it supports to select resistive or capacitive screen (capacitive screen by default), the touch signal is in the 37pin to 39pin interface.When soldering U20, R182 and R185, not soldering R175 and R188, it’s for resistive screen;When not soldering U20, R182 and R185, soldering R175 and R188, it’s for capacitive screen;R175, R182, R185 and R188 are all 0 ohm resistor, 0402 package, they are on the top left of the LCD interface.FAX: 86-755-83042572 E-mail:*****************2.14 Camera InterfaceCamera interfaces--CAMERA is 2.00mm pitch 20 pins interface, can connect 3Megapixel OV3640 module.Note: When connecting the camera module, it must pay attention to the interface’s direction; the triangle symbol on the module must be inserted to the corresponding triangle symbol on the board. If connect incorrectly, it is easy to burn the camera module directly. After connect the OV3640 camera module, the camera should be in the direction of the PCB.FAX: 86-755-83042572 E-mail:*****************2.15 Micro SD Card InterfaceMicro SD Card Interface is on the back side of Camera interface. When inserting please do not be so hard, in case of making the SD card bend and damage. When there is no program, set the boot mode as SD card boot, then you can burn program to the board. The SD card can be set as automatic burning, manual burning or UBoot boot card. After the system booted, the Micro SD card can be used as an external storage device.2.16 Debug serial portUART1 white interface is the 3-line RS232 level debug serial port, 3pin 2.00mm pitch. The real pin’s position is on the bottom of the interface. The interface definition is RXD0, TXD0, and GND from the bottom to top.FAX: 86-755-83042572 E-mail:*****************2.17 RTC CircuitIn order to ensure the RTC is right and effective, the 3V button battery will continue to supply power to the system RTC after the external power interrupted.The battery model is CR1220; it is on the back of the board.2.18 Extension InterfaceE9 Mini PC provides 2.00mm pitch 2*25 double pins extension interfaces. The extension interfaces: 5V and 3.3V power supply, 2-channel USB Host, 17-channel GPIO with interrupt function, 2-channel CAN, 3-channel UART, 1-channel SPI, 1-channel SDIO, 2-channel PWM.FAX: 86-755-83042572 E-mail:*****************。

19 inch LCD MonitorLightFrame™An intelligent and revolutionary technology for enhancing monitor's brightness, sharpness, contrast and color. Images enhanced by LightFrame™ are lively, realistic, clear, attractive and colorful.Wide viewing angleThe wide viewing angle provides the clearest display from any angle.Fast response timeThe amount of time it takes for a liquid crystal cell to go from active (black) to inactive (white) and back to active (black) again.It is measured in milliseconds. Lower numbers mean faster transitions and therefore result in fewer visible image artifacts.Dual InputConnectors to accommodate input of both analog VGA and digital DVI signals.In-box DVI cableA DVI cable is shipped with product.SXGA, 1280 x 1024 resolutionFor graphics monitors, the screen resolution signifies the number of dots (pixels) on the entire screen. For example, a 1280-by-1024 pixel screen is capable of displaying 1280 distinct dots on each of 1024 lines, or about 1.3 million pixels.sRGB readyCalibrated RGB that is optimized for the vast majority of computer peripherals, monitors, operating systems and browsers, allowing accurate color mapping with very little data overhead.Built-in SpeakersAudio speakers built into a display device.Stand-alone audioAdvanced built-in firmware makes audio output available even when there is no video input.Adjustable heightThe ability to set your monitor to the most pleasurable viewingheight. Height adjustment makes computer work more comfortable and reduces fatigue or eyestrain, even when you spend long hours working on the computer. It makes you more productive.Screen pivotEnables use of a monitor in both landscape and portrait orientations. In order to have a better view of the image displayed on screen you can change orientation effortlessly by simply holding the monitor and pivoting it to portrait or landscape mode.Screen tilt and swivel Movement of a screen to attain the ideal viewing angle.SmartManageA system for monitoring, managing and checking status of display devices as well as delivering remote support to users who experience difficulties all accomplished over a LAN.Lower power consumptionReduction of the electrical power required to operate a device.Kensington anti-theft lock A security device that fixes the monitor in place to prevent theft.Embedded power supplyA power adaptor built into the body of a display device that replaces a bulky external power adaptor.VESA mounting holesA unified industry standard for mounting IT equipment set by the Video Electronics Standards Association.Picture/ DisplayCommercial Specifications • LCD Panel Type 1280 x 1024 pixels, Anti-glare Polarizer, RGB Vertical Stripe• Panel Size19"/ 48 cm • Effective Viewing Area376.3 x 301.1 mm • Pixel Pitch0.294 x 0.294 mm • Brightness (nits)300• Contrast Ratio700:1• Display Colors16 M • Viewing Angle (C/R > 10)- Horizontal : 170° - Vertical : 170°• Response Time 16 ms• White Chromaticity, 6500º K x = 0.313 / y = 0.329• White Chromaticity, 9300º K x = 0.283 / y = 0.297• Maximum Resolution 1280 x 1024 @ 75Hz • Recommended Resolution 1280 x 1024 @ 60Hz • Factory Preset Modes 15 modes • User Definable Modes 14 modes • Horizontal Scanning Frequency 30 - 82 KHz • Refresh Rate (V) 56 - 76 Hz • Picture Enhancement LightFrame ™• sRGB YesConnectivity• Signal Input Analog (VGA), DVI-D,PC Audio in • I/O interface on padHeadphone JackConvenience• Built-in Audio 2W RMS x 2 StereoSpeakers• Convenience Enhancements On-screen DisplaySmartManage• Monitor Controls Auto, Brightness control, Left/Right, LightFrame, Menu (OK), Power On/Off,Up/Down, Volume control • OSD Languages English, French, German, Italian, Simplified Chinese,Spanish• Other Convenience Features Kensington Lock • Plug & Play Compatibility DDC/CI, sRGB,Windows 98/ME/2000/XP • Regulatory Approvals CE Mark, E2000, FCC-B, UL, CSA, NUTEK, Energy Star, SEMKO, EMC, TCO'03, TCO'99, TÜV/GS, TÜV-Ergo • Swivel +/- 65°• Tilt-5° to 25°• VESA Mount100 mm x 100 mmAccessories• User ManualYes • Pivot & Portait User Pack Yes• Included Accessories AC Power Cord,Audio Cable, DVI-D Cable,VGA CableProduct HighlightsDimensions• Depth (with base)210 mm • Height (with base) 432 mm • Width (with base)425 mm • Height Adjustment Range 130 mm • MTBF50,000 hrs • Relative Humidity20 % - 80 %• Temperature Range (Operation) 5°C to 35°C • Temperature Range (Storage) -20°C to 60°C • Weight8.53 kgPower• Complies With E2000, Energy Star,NUTEK• Consumption 42.5 W (Typical)• Off Mode<1 W• Power LED Indicator Operation, Blue; Stand by/Sleep,Amber • Power SupplyBuilt-inTrademarks owned by Royal Philips Electronics2004 © Royal Philips Electronics - All rights reserved As an Energy Star partner, Philips has determined that this product meets the Energy Star guidelines for energy efficiency.Microsoft and Windows are registered trademarks of Microsoft Corporation.All data subject to change without notice Release date: June 。

诚研 P910L 数位打印机使用说明书手册处置1.版权所有，翻印必究。

本使用手册所包含版权未经诚研科技书面许可，不得转载或以任何型式复制或翻译。

2.使用手册中的机器规格如有变更，恕不另行通知。

3.使用手册中如有任何困难或错误，请与诚研科技连络。

前言本手册将指导如何使用和基本操作诚研P910L数字打印机，手册中将以”打印机”来叙述该款机器；安装操作使用前请详细阅读本手册。

目錄第一章安全指导 (1)使用环境 (1)处置方式 (2)耗材及相片处置方式 (4)第二章安装与设定 (5)拆箱并检查配件 (5)零件名称及功能 (6)打印机灯号名称与打印机状态 (7)安装固定角 (8)连接电源线 (8)连接USB线 (9)连接计算机 (9)安装色带 (10)安装相纸 (11)安装纸屑盒 (13)搬运打印机 (13)第三章日常保养 (14)清洁热敏头及压纸滚轮 (14)清洁外壳 (15)清洁滤网 (16)第四章错误讯息处理 (17)打印机状态灯号显示为红色 (17)错误现象 (18)卡纸 (18)打印中电源中断 (19)断色带 (19)第五章操作提示 (20)相纸预裁功能可透过打印机驱动程序予以关闭 (20)长时间连续打印注意事项 (20)规格 (21)第一章安全指导本手册提供详尽打印机使用安全指导，使用前请仔细阅读，以确保正确使用。

◆请仔细阅读本册中之各项注意事项。

◆安全性注意事项如下所列，请仔细阅读此处说明，以确保使用安全。

警告: 不当的处置可能会造成死亡或严重受伤。

警告：不当的处置可能造成使用者受伤或引起身体伤害。

◆无法预知装机或使用打印机时所发生的危险，因此手册或是打印机上的警告标示叙述无法含盖所有的危险状况；使用者因对所有使用中发生的状况负安全的责任。

◆手册中所叙述操作方式/ 保养注意事项/ 其它文件所述是为了要正确的使用打印机，如将打印机使用做其它用途，使用者应对其安全负责。

◆请勿执行手册或文件中所禁止的操作行为。

MPC-2101系列10吋工業無風扇面板電腦特色與優點•10吋面板電腦•Intel Atom®處理器E38451.91GHz•日照下可判讀的1000nit LCD•-40至70°C寬溫度設計，無風扇或加熱器•EN50155:2017相容認證簡介採用Intel Atom®處理器E3800系列的MPC-210110吋面板電腦，為工業環境提供可靠耐用的多功能平台。

所有介面均配備IP66防護等級M12連接器，藉以提供防震和防水的穩定連線。

MPC-2101面板電腦配備兩個可選式軟體的RS-232/422/485串列連接埠和兩個乙太網路LAN連接埠，支援多種串列介面以及高速IT通訊，這些都提供本機網路備援。

MPC-2101系列面板電腦的設計可耐受-40至70°C的寬溫度範圍，並採用無風扇、流線型外殼，專為高效散熱而設計，成為適用於易震動、嚴苛、炎熱的戶外環境中，最可靠的工業平台。

MPC-2101也配備1000-nit LCD面板，採用日照下可判讀的投射電容式多點觸控螢幕，達到絕佳使用者體驗。

外觀規格ComputerCPU Intel Atom®Processor E3845(2M Cache,1.91GHz)Graphics Controller Intel®HD GraphicsSystem Memory Pre-installed4(8GB Max.)GB DDR3LSystem Memory Slot SODIMM DDR3/DDR3L slot x1Pre-installed OS MPC-2101-E4-LB-CT-T-W7E/MPC-2101-E4-CT-T-W7E:Windows Embedded Standard7(WS7P)64-bit pre-installedMPC-2101-E4-LB-CT-T-LX/MPC-2101-E4-CT-T-LX:Linux9pre-installedStorage Slot CFast slot x1SD slots x1,SD3.0(SDHC/SDXC)socketStorage Pre-installed MPC-2101-E4-LB-CT-T-W7E/MPC-2101-E4-CT-T-W7E:32GB CFast CardMPC-2101-E4-LB-CT-T-LX/MPC-2101-E4-CT-T-LX:32GB CFast CardExpansion Slots Mini PCIeSupported OS Windows10Pro64-bitWindows10Embedded IoT Ent2019LTSC64-bitWindows10Embedded IoT Ent2016LTSBWindows7Pro for Embedded SystemsWindows Embedded Standard7(WS7P)64-bitLinux Debian9Computer InterfaceDigital Output DOs x2(M12A-code)Digital Input DIs x4(M12A-code)Serial Ports RS-232/422/485ports x1(M12A-code12P)USB2.0USB2.0hosts x1(M12A-code5P)Ethernet Ports Auto-sensing10/100Mbps ports(M12D-coded4P)x2LED IndicatorsSystem Power x1DisplayPanel Size10.4-inch viewable imagePixel Pitch(RGB)0.240(H)x0.240(V)mmContrast Ratio1000:1Active Display Area210.4(H)x157.8(V)mmAspect Ratio4:3Viewing Angles176°/176°Max.No.of Colors16.2M(8-bit/color)Response Time5ms(gray to gray)Pixels1024x768Light Intensity(Brightness)500/1000cd/m2Touch FunctionTouch Support Points4pointsTouch Type Capacitive Touch(PCAP)Glove Support YesSerial InterfaceBaudrate50bps to115.2kbpsData Bits5,6,7,8Flow Control RTS/CTS,XON/XOFFParity None,Even,Odd,Space,MarkStop Bits1,1.5,2Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GND RS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDPower ParametersInput Voltage24to110VDCPhysical CharacteristicsDimensions256.9x214.4x58.9mm(10.11x8.44x2.32in) Housing MetalIP Rating IP66Weight2,080g(4.59lb)Environmental LimitsAmbient Relative Humidity5to95%(non-condensing)Operating Temperature-40to70°C(-40to158°F)Storage Temperature(package included)-40to70°C(-40to158°F)Standards and CertificationsEMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:6kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:20V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kV;Signal:1kVIEC61000-4-6CS:10VIEC61000-4-8PFMFMechanical Protection Rating IEC60529,IP codeSafety IEC62368-1,IEC60950-1,UL62368-1Shock EN50155standardEMC EN55032/35Vibration EN50155standardDeclarationGreen Product RoHS,CRoHS,WEEEWarrantyWarranty Period System:3yearsLCD:1yearDetails See /tw/warrantyPackage ContentsDevice1x MPC-2101Series computer Documentation1x quick installation guide1x warranty cardInstallation Kit1x M12-Phone jack power cable1x M12-Type A USB cable1x terminal block,2-pin(for remote power input)6x screw,for panel-mounting尺寸訂購資訊2.0MPC-2101-E4-LB-CT-T-W7E 10"(4:3)500nitsE3845Quadcore4GBW7E(64-bit)2(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°CMPC-2101-E4-CT-T-W7E 10"(4:3)1,000nitsE3845Quadcore4GBW7E(64-bit)2(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°CMPC-2101-E4-LB-CT-T-LX 10"(4:3)500nitsE3845Quadcore4GB Debian92(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°CMPC-2101-E4-CT-T-LX 10"(4:3)1,000nitsE3845Quadcore4GB Debian92(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°CMPC-2101-E4-LB-CT-T 10"(4:3)500nitsE3845Quadcore4GB–2(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°CMPC-2101-E4-CT-T 10"(4:3)1,000nitsE3845Quadcore4GB–2(M12)1(M12)1(M12)4/2(M1-2)24to110VDCIP66-40to70°C©Moxa Inc.版權所有.2021年3月10日更新。

目录第一章安全手册----------------------------------------------31 设备使用维护说明书中的警示符号-----------------------32 采煤机上的标志---------------------------------------33 概述-------------------------------------------------34 正确使用---------------------------------------------45 运输和安装-------------------------------------------56 工作人员---------------------------------------------57 操作、维护及修理-------------------------------------58 环境保护---------------------------------------------79 其它危险 --------------------------------------------7 第二章整机--------------------------------------------------91 概述 ------------------------------------------------92 主要技术特性 ----------------------------------------133 主要组成部分及工作原理 ------------------------------154 结构特点 --------------------------------------------16 第三章牵引机构 --------------------------------------------191 概述 ------------------------------------------------192 牵引机构的机械传动 ----------------------------------193 牵引电机 --------------------------------------------264 液压制动器 ------------------------------------------265 润滑 ------------------------------------------------28 第四章截割机构 --------------------------------------------291 概述 -----------------------------------------------292 截割机构的机械传动 ---------------------------------293 截割机构的润滑 -------------------------------------39 第五章调高液压系统 ----------------------------------------40 1 概述 -----------------------------------------------402 调高液压系统工作原理 -------------------------------403 调高液压系统元件 -----------------------------------42 第六章破碎机构 --------------------------------------------461 概述 -----------------------------------------------462 破碎机构的机械传动 ---------------------------------46 第七章采煤机电气 ------------------------------------------491 概述 -----------------------------------------------492 技术特性 -------------------------------------------513 采煤机控制和保护 -----------------------------------634 使用与维护 -----------------------------------------675 电控系统常见故障分析与处理 -------------------------69 第八章辅助装置 --------------------------------------------771 机身联接 -------------------------------------------772 拖缆装置 -------------------------------------------793 冷却喷雾装置 ---------------------------------------804 斜护板 ---------------------------------------------815 集中润滑装置-----------------------------------------81 第九章使用维护与检修 --------------------------------------821 井上检查与试运转 -----------------------------------822 解体下井运输 ---------------------------------------833 采煤机的操作 ---------------------------------------844 维护和检修 -----------------------------------------85 附录一：导向滑靴和平滑靴的磨损 ------------------------------89 附录二：易损件说明--------------------------------------------90 附录三：铰轴拆卸工具 ----------------------------------------91 附录四：扭矩值------------------------------------------------92编制：审核：审核：批准：第一章安全手册1设备使用维护说明书中的警示符号下面的符号用于设备使用维护说明书中特别重要的说明。

SHIVA USER MANUALPlease read safety instructions before you use this amplifierFeatures:• 2 Channel All-Tube Design•Ch.1: Bass, Treble & Volume control, Bright switch•Ch.2: Bass, Middle, Treble, Gain & Volume control, Bright and Shift switch•Boost mode, variable via independent Volume control on Ch.2•Common Master Volume and Presence control•Tube-buffered series FX-Loop with pedal and rack sends and returns•Functions on footswitch: ch.1 or Ch.2, boost, reverbOPTIONS:•80 watt EL34 or 60 watt 6L6 power amp•Reverb with independent reverb level controls for each channel•20th Anniversary circuit, 90W KT88, Mode switch for Ch. 2, excursion control, plexi panel with gold background, head enclosure with classic bottom mounted look (see 2.e)•Available as Head, ported 1x12 or 2x10 closed back combo and open back 2x12 combo DIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom Case is being made. Add ¾ inch for each, handle and rubber feet.Head: 10” H 24.50” W 10.50” D 41 pounds1x12 Combo: 21.37” H 24.25” W 10.50” D 68 pounds2x10 Combo: 21.37” H 24 ½” W 10.50” D 71 pounds2x12 Combo: 20” H 27.25” W 10.50” D 74 pounds2. How to use it:Read this owner manual completely before use to fully understand your Shiva’s functions. In paragraph e) the differences of the 20th Anniversary model are described.a) Master Volume and PresenceThe Master Volume and Presence work on both channels. Experiment with different combinations between Volume and Master Volume. You can set the Volume high and the Master Volume low or set the Master high and the Volume low. One setting could be just as loud as another, but they will feel and sound different.b)Boost Function and Bright SwitchOn Channel 1, with the Boost engaged, the Tone-Stack is bypassed. This means the Bass and Treble controls are not in the circuit anymore and have no effect on the sound. This was the only way to have a boost function on this channel with the original un boosted tone preserved.With the Bright switch pushed in you get a brighter more open sound; this is less to none effective the higher the Vol.1 is set.On Channel 2, with the Boost off use Vol.2, with the Boost engaged use B.Vol.2. This makes the boost variable and you are able to set it quite different.With the Bright switch pushed in you get a brighter more open sound. This gets less effective the higher the Gain is set but still noticeable if turned all the way up.c) Effects LoopYour individual channel volume levels control how hot the effects loop send signal is, depending on the effect unit you may have to keep the channel volumes lower but you can then turn up the "Global Master Volume" to control your amps overall volume. The Shiva's Loop is a series Loop between the Pre and Power Amp, if you have an older version Shiva made prior to 12/1/05 see below for special info. Current version Shiva’s made after 12/1/05 now have two Effect loop sends and one effect loop return. One send is a low-level Pedal/Instrument level and the other send is a hotter-level Rack/Line effects level. Y ou can only use ONE loop send at a time. This newer version Shiva eliminates the need for the special "Effects loop cable" that older version Shiva’s made prior to 12/1/05 sometimes needed to prevent effects from being overloaded from the hot loop send the older Shiva’s had. Current Shiva’s allow you to use the new low-level Pedal/Instrument level send for pedals and rack effects with inputs that overload easily. The new hotter-level Rack/Line level loop send is perfect for rack effects or pedal effects with a lot of headroom on their input stage. If you notice, after plugging in an effect through the loop that your tone is distorting or too compressed, try using the low-level Pedal/Instrument level send for pedals and rack effects with inputs that overload easily. If you're still overloading the effects input, remember to lower the individual channel volume levels since they control how hot the effects loop send signal is, you can then turn up the "Global Master Volume" to control your amps overall volume. If you would like to use the Shiva as a "Power Amp" only with other manufactures Preamps, plug your external preamps output into the "Power Amp In" Input jack on the back panel, located near the Effects Loop section. The "Power Amp In" bypasses the Shiva's preamp, you can still use the Master volume and Presence controls since these controls are part of the power amp circuit.NOTE for Older Shiva's made prior to 12/1/05 Effects Loop: The Loop is a series Loop between the Pre and Power Amp; designed for line level-Fx (we used a Rocktron Intelifex). If you want to use an instrument level (floor) Effect unit or if your line level (rack) Effect unit is too sensitive for the hot send signal, you can use our special built in Boost Amp. All you need is a special level ducking cable, available from us or you can make your own, see the "How to Make Effects Cable" link on Shiva portion of our website. Plug this special cable between the Effects Loop Send output and Input of your Effect unit, make sure to insert into the Effects unit input the modified 1/4" plug. Plug the output of your Effects into the input of the Boost Amp (located on the back) and hook up the output of the Boost Amp to the return of the Fx Loop with a short jumper cable. This is necessary because of the lower output send level so it does not distort the input of your FX but we have to bring the level back up after it leaves the FX in order to keep the original tone of the amp. Remember (if you use the Loop) the Channel Volume controls work like send levels, the higher you set the Volume, the more Level comes into the Effect. Set the Master Volume for overall Volume. The Loop circuit is always in the sound chain (even if nothing is hooked up to it). If you want to bypass your FX, you would have to do it on the FX unit.If you plug into the send you tap the signal of the Pre Amp and you could also send it to a recording device, mixer or another power amp etc. It would not be necessary to return the signal back into the amp. On the other hand if you plug into the return you disconnect the Pre Amp from the Power Amp. You could use your Shiva just as a Power Amp. As always, you must have the amp under load from a speaker cab or load box or damage may occur.d) ReverbIf you switch the Reverb in, you hear a slight level loss. This is because the reverb circuit loads the amp down. On most amps you don't hear that because they don't have real reverb bypass and the amp is down loaded all the time. We decided not to do this because we like the open sound of the amp if you don't use the reverb. It is possible to change that with a very easy modification. Contact the factory for details. You have individual Reverb controls for each channel located on the back panel.e) 20th Anniversary ModelThe 20thA model comes with a pair of KT88’s and the amp is rated at 90 watts. The clean channel has an entire new boost circuit. Unlike the tone stack bypass boost on the other Shiva model this boost has a separate gain stage which brings this channel into Plexi territory when boost is engaged. The tone controls stay in the circuit and affect the sound.The gain channel features higher gain and a slightly more refined type of gain. Two push button switches have been added to further shape the tone. The Shift button will as it is labeled shift the EQ., pushed in you will have a more Fender or type tone, less mids softer feel. One could say it will please the Dumble favoring players. The Mode button if pushed in will give a more aggressive in your face feel.A power amp dampening control was added located on the back panel. This control labeled Excursion is great to dial in a full sound at low volumes or adjust the right balanced bass to a cabinet. Be careful as this can add massive bottom to your sound which might overpower other frequencies and cover up an overall balanced sound. Best to keep low at higher volumes.f) Speaker OutputsIf you put the amp in play make sure you have a load or speaker cabinet hooked up, otherwise you could damage the output transformer and the power tubes. Let's begin by hooking up a speaker to the new Speaker 1 "Use First" jack on the back panel of the Shiva. Be sure to set the impedance switch correctly, use the 16, 8, or 4 ohm setting to match your cabinet. If you're not sure what impedance your cab is, open the back of the cabinet and call your dealer. There are many ways to wire a speaker cabinet and you need to know what yours is rated at. To add a second speaker cabinet, use the second speaker jack and make sure both cabinets have matching impedances, the speaker output jacks are parallel so be sure to change the impedance selector to "half" the impedance rating of one speaker cabinet. For example: using two 16 ohm cabinets switch the impedance selector to 8 ohms or to use two 8 ohm cabinets you must change the selector to 4 ohms. Do not use two 4 ohm cabinets and NEVER EVER use mismatched speaker impedances. Next, flick the power switch (front panel, right side) to the center "standby" position and let the amp warm up for several minutes. This will stabilize the circuits and prevent a painful surge from flashing through your tubes. If you're kind to your amp, it will reward you with grateful reliability. When ready to play, flick the power switch up to the "play" position.NOTE for older Shiva’s made prior to 12/1/05: If you put the amp in play make sure you have a load or speaker cabinet hooked up, otherwise you could damage the output transformer and the power tubes. This older Shiva does not have an ohm selector; it has 3 speaker output jacks each labeled with an oval containing 2 numbers in it. One of the numbers in each oval is marked out with a black marker, so only the other number is important to you! If you hook up only one cabinet, the impedance (ohm value) of amp and cabinet should match: 4 into 4, 8 into 8 or 16 into 16. If you hook up two cabinets (they must have the same impedance, same ohm value). The total ohm value is half the value of one cabinet since they run parallel now: so two 16 ohm cabs plug into the two 8 ohm jacks, two 8 ohm cabs plug into the two 4 ohm jacks if your amp is wired with two 4 ohm speaker outputs of course, see the following for more details: The EL 34 Model has one 16 and two 8 ohm speaker outputs (the transformer has an internal 4 ohm tap also, so the outputs could be wired to 8 4 4 or 16 8 4 ohms if you wanted your amp customized)NOTE for 6L6 Shiva's made June 2002 and newer are wired with one 16 and two 8 ohm speaker outputs, just like the EL34 models. Shiva 6L6 models made before June 2002 approx. do not have a 16 ohm tap. The older 6L6 Model have one 8 and two 4 ohm speaker outputs (the transformer has an internal 2 ohm tap also, so outputs could be wired to 4 2 2 or 8 4 2 ohms if you wanted your amp customized) Keep that in mind because most of the 4x12" cabinets are 16 ohms.g) FootswitchYour amp comes with a 3 button footswitch, (Note: in the past 2 button footswitches were used for "older" non-Reverb Models, see below for info). One button is for switching between the two channels, one for engaging the boost on channel 1&2 and one for the reverb option if applicable. The footswitch jacks are located on the back panel. The top one is labeled reverb, the bottom one channel/boost. The older 2 button "non-Reverb" footswitch has one stereo (ring, ring, and tip) ¼" plug which goes in thechannel/boost jack. The 3 button footswitch has a second plug, a mono ¼" plug (ring and tip), which goes into the reverb jack. If you don't know the difference between mono and stereo plugs look at them and you will notice the difference (Mono = tip, ring and Stereo = tip, ring, ring). Current Shiva’s have a 4-position rotary switch on the right-side back panel. This rotary switch is only active when the footswitch is not plugged in. This rotary switch allows you to activate either: Position 1 = channel one or Position 2 = channel two or position 1+ = channel one with boost engaged or Position 2+ = channel two with boost engaged.NOTE for older Shiva versions made prior to 12/1/05: On older Shiva’s if you don't connect the footswitch only the Clean Channel 1 can be accessed, read further below on how to activate the High Gain channel 2 if not using a footswitch. On reverb models, the reverb is always on if the reverb footswitch plug isn't connected. NOTE using the "older version" Shiva without the footswitch connected: Some people may not need to use their footswitch because they only need one channel to play thru. The Shiva defaults to the Clean channel with the Reverb on when no footswitch is plugged in, however to activate the High gain channel without using the footswitch you have two options: First option, plug in a "shorted" mono 1/4" instrument plug, this will give you the High gain channel with the Boost function engaged as well. Second option: plug in a "shorted" stereo 1/4" instrument plug; this will give you the High gain channel without the Boost function. Shorted means the tip and sleeve/ground are connected; using a "right-angle" plug is a good idea also since it has a low profile and will not extend out from the amp chassis very much. Also you can easily short the 1/4" plug internally, just solder a jumper between the two contacts.3. TubesEL34's should be only Svetlana or old stock Siemens/Telefunken/Mullard. Other brands may work but it's risky because of the high plate voltage we use. 6L6 should be Svetlana or Sovtec 5881, we prefer the first. For preamp tubes you could use everything from 12AX7, 7025, ECC82, ECC83, 12AXWB,12AX7WA, 12AT7 etc. Sovtek, EI, Electro Harmonix, Chinese, Tesla, GE, Philips, Telefunken, RCA etc. We prefer the Chinese 12AX7A's.The Shiva has 6 preamp tubes (7 in reverb model) which do the following:1st (closest to input jack) > Ch 1+2 > check that one if your amp gets noisy or microphonic.2nd+3rd > Ch2 only4th > one part (triode) Ch 1, second part for the loop send (affects both channels)5th > loop return (affects both channels)6th (second row in center of chassis) > phase inverter (affects both channels)7th (second row towards side of chassis) > reverbNote: If you want to experiment with different tubes the first 3 tubes are the most noticeable ones, sound wise. The less gain the tube has and the earlier the tube is in the sound chain (1st, 2nd...) the less noisy your amp is.Make sure you turn your amp off when you switch tubes and be careful the tubes might be very hot!! Do not touch tube sockets with fingers? Even after turning your amp off and unplugging it from the power outlet there could be enough voltage stored in the capacitors to give you a lethal electrical shock.Read safety instructions again!!4. SpeakersThe 1x12" combos made prior to June 2002, are loaded with a Celestion Classic 80 8 ohm speaker.1x12" combos made June 2002 and newer use Celestion Classic 80 16 ohm speaker. If you want a more open vintage sound try a Celestion Vintage 30 NOTE: be careful how loud you play because the Vintage 30 speaker can handle only 60 watts.Subject to change, depending on availability on Speakers.5. TroubleshootingMake sure your read and understand the safety instructions!! Repairs should be done only by knowledgeable Technicians!! Always make sure your Cables, Guitars, Effects and Extension Cabinets are working and hooked up correctly. If you think something is wrong with your Amp, play straight into the Amp with nothing else hooked up other than a Guitar. That way you make sure it is the Amp. If you own a combo unplug the internal speaker and hook up an external speaker cabinet to make sure it's only the amp which is faulty. For noise check the appropriate preamp tubes (refer to f). Tubes are delicate and have a limited live span depending on operating time, temperature and mechanical influences. 99% of all sound and noise problems come from preamp tube failure. We let our amps run for at least two days before we ship them to make sure that the tubes work properly but since they have a glass housing and delicate little plates inside them it happened that they got damaged during shipping. Please don't feel discouraged. We don't manufacture tubes and can only retest them to make sure they're okay.6. FusesTo check the fuses, use an Ohmmeter to make sure they're blown because sometimes you can't see if they're blown. The Main fuse for 100 and 117 volt models should be 3A (2A for 230 volt). The HT fuse should be ½ A on all models. Use only type "3AG Slow Blow" fuses. You can get those from Radio Shack. The HT fuse blows usually if your power tubes are bad to protect the power amp circuit from getting damaged. If the Main fuse blows it could be just a voltage peak from your power outlet. Put a new one in and see what happens. If it blows again give us a call. In most cases it is just a 20 cent rectifier diode for the plate voltage which went bad.There you have it! It's all up to you now, be creative and push your musical imagination…For Questions call, check out our webpage: 。

Instructions Manual Cooker HoodMODELIN1900S/IXINDEXEN RECOMMENDATIONS AND SUGGESTIONS (3)CHARACTERISTICS (4)INSTALLATION (5)USE (7)MAINTENANCE (8)your specific appliance.INSTALLATION • The manufacturer will not be held liable for any damages resulting from in-correct or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please re-fer to the paragraphs on working dimensions and installation). • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood. • For Class I appliances, check that the domestic power supply guarantees adequate earthing. Connect the extractor to the exhaust flue through a pipe of minimum diame-ter 120 mm. The route of the flue must be as short as possible. • Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc.). • If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. The kitchen must guarantee the entry of clean air.USE • The extractor hood has been designed exclusively for domestic use to elimi-nate kitchen smells. • Never use the hood for purposes other than for which it has been designed. • Never leave high naked flames under the hood when it is in operation. • Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. • Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames. • Do not flambè under the range hood; risk of fire • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern-ing use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appli-ance.MAINTENANCE • Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. • Clean and/or replace the Filters after the specified time period (Fire hazard). • Clean the hood using a damp cloth and a neutral liquid detergent.The symbol on the product or on its packaging indicates that this product may not be treatedas household waste. Instead it shall be handed over to the applicable collection point for therecycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,you will help prevent potential negative consequences for the environment and human health,which could otherwise be caused by inappropriate waste handling of this product. For moredetailed information about recycling of this product, please contact your local city office, yourhousehold waste disposal service or the shop where you purchased the product.ComponentsRef. Q.ty Product Components1 1 Hood Body, complete with: Controls, Light, Blower, Filters8 1 Directional Air Outlet grille9 1 Reducer Flange ø 150-120 mm10 1 Dumper ø150 mmelement20 1 ClosingRef. Q.ty Installation Components12a 4 Screws 4,2 x 44,412e 2 Screws 2,9 x 9,5DocumentationQ.tyManualInstruction1SNAP-ON FITTING• The hood can be installed either directly on the bottom surfaceof the wall units using snap-on side supports.• Cut a fitted opening in the bottom surface of the wall unit, asshown.• Insert the hood until the side supports snap into place.• Lock in position by tightening the screws Vffrom underneaththe hood.CLOSING ELEMENT• The space between the edge of the hood and the rear wall canbe closed by applying the element 20 provided, using thescrews supplied for this purpose.ConnectionsDUCTED VERSION AIR EXHAUST SYSTEMor 120mm, the choice of which is left to the installer.To install a ø 150 pipe• To install the dumper 10•(not supplied).To install a ø 120 pipe•the reducer flange 9 on the dumper 10.• Fix the pipe in position using sufficient pipe clamps(not supplied).• Remove any activated charcoal filters.RECIRCULATION VERSION AIR OUTLET• Cut a hole ø 125 mm in any shelf that may be posi-tioned over the hood.• Insert the reducer flange 9 on the hood body outlet.• Connect the flange to the outlet on the shelf over thehood by using a flexible or rigid pipe ø120 mm.• Fix the pipe in position using sufficient pipe clamps(not supplied).• Fix the air outlet grid 8 on the recirculation air outletby using the 2 screws 12e (2,9 x 9,5) provided.•inserted.ELECTRICAL CONNECTION• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.• When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks.USEControl panelL Light Switches the lighting systemon and off.M Motor Switches the extractor motoron and off.V Speed Sets the operating speed ofthe extractor:1. Low speed, used for acontinuous and silent airchange in the presence oflight cooking vapour.2. Medium speed, suitablefor most operating condi-tions given the optimumtreated air flow/noiselevel ratio.3. Maximum speed, used foreliminating the highestcooking vapour emission,including long periods. LM Motor Switches the extractor motoron and off.V Speed Sets the operating speed ofthe extractor:1. Low speed, used for acontinuous and silent airchange in the presence oflight cooking vapour.2. Medium speed, suitablefor most operating condi-tions given the optimumtreated air flow/noiselevel ratio.MAINTENANCEGrease filters• The filters must be cleaned every two monthsof operation, or more frequently with heavy us-age, and can be washed in a dishwasher.• Remove the filters one at a time, after discon-necting the relative fastening elements.• Wash the filters, taking care not to bend them.Allow them to dry before refitting.• When refitting the filters, make sure that thehandle is visible on the outside.CLEANING MULTILAYER METAL GREASE FILTERS • The filters must be cleaned every two monthsof operation, or more frequently with heavy us-age, and can be washed in a dishwasher.• Release the filter retaining grill using the lateralsliding handles.• Remove the filter retaining clips.• Remove and wash the filters. Allow them to drybefore refitting.• Replace the filters on the grill, fix them in posi-tion using the filter retaining clips and close thefilter retaining grill.REPLACING SYNTHETIC GREASE FILTER • The filter is not washable and cannot be regen-erated, and must be replaced approximately e-very two months of use, or more frequentlywith heavy usage.• Release the filter holder frame using the lateralsliding handles.• Remove the fIlter retaining clips.• Replace the saturated synthetic filter.• Fix the new synthetic filter using the retainingclips and close the filter holder frame.Activated charcoal filter (Recirculation version)These filters are not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently with heavy usage.REPLACING THE ACTIVATED CHARCOAL FILTER•Remove the metal grease filters •Remove the saturated activated charcoal filter as shown (A ). •Fit the new filters (B ). • Replace the metal grease filters.Lighting436004866_ver1。

PhilipsLCD widescreen monitor49 cm (19.1") wideWXGA+190CW7CS Best value for money widescreenLCD monitorEnjoy more with this big widescreen! Experience multiple viewing experiences on a singlescreen with the Philips 190CW7's fast response time and convenient dual DVI and VGAconnectors - all in one easy-to-use, highly affordable package.Outstanding front of screen performance•Empowered for Windows Vista•Big, wide screen: IM, write mail, watch videos on one screen•5ms fast response time•WXGA+, wide format 1440 x 900 resolution for sharper display•sRGB ensures color matching between display and printoutsGreen design•For your safety: Aerospace composite fire retardant case•Power consumption below the industry averageGreat convenience•Dual input accepts both analog VGA and digital DVI signals•One-touch brightness and contrast controls•Embedded power supply eliminates external power adaptors•Auto adjustment for perfect picture display with one touchHighlightsWindows Vista readyPhilips Vista-ready monitors are empowered for vibrant, exciting display of this new, visually sophisticated and demanding Windows operating system, designed to enhance your entertainment experience, make you more productive and help you control your computing experience at home and in the office, making viewing, finding and organizing information for work or play quick, efficient and easy.Widescreen designA wide screen has a wider aspect ratio for displaying more entertainment or information to have more fun and get more done.5ms on/off response timeOn-Off response time is the period required for a liquid crystal cell to go from active (black) to inactive (white) and back to active (black) again. It is measured in milliseconds. Faster is better: Lower response time means faster transitions and, therefore, results in fewer visible image artifacts in the display of transition of texts and graphics. On-Off response time is a more important measure in the display of business content like documents,graphs and photos.WXGA+ 1440 x 900 resolutionWXGA+ or Wide Extended Graphics Arrayplus is a standard indicating a graphicsmonitor's ability to display up to theresolutions 1440 by 900 pixels and supportssimultaneous display of more than one millioncolors. WXGA allows monitors to be non-interlaced for better display performance andincreased color accuracy.sRGB readysRGB is an industry standard that ensures thebest possible match between the colorsdisplayed on your screen and those in yourprintouts.Flame retardant cabinetPC/ABS plastic composite is the industry's bestand toughest flame-retardant casing material;and is a space-age compound deployed in theaerospace and automotive industries as well asin fire detectors that is compliant with moststringent fire safety standards.Lower power consumptionReduction of the electrical power required tooperate a device.Dual inputDual input provides connectors toaccommodate input of both analog VGA anddigital DVI signals.Brightness and contrast buttonConveniently located buttons on the frontbezel that provide one-touch brightness andcontrast adjustments.Embedded power supplyAn embedded power supply is a poweradaptor built into the body of a display devicethat replaces a bulky external power adaptor.One-touch auto adjustmentThe auto adjustment key restores optimalscreen position, phase and clock settings withthe press of a single button - withoutnavigation through OSD menus and controlkeys.Issue date 2021-02-16 Version: 4.0.1312 NC: 8639 000 17262 UPC: 6 09585 11844 7© 2021 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•LCD panel type: 1440 x 900 pixels, Anti-glare polarizer, RGB vertical stripe•Panel Size: 19.1"/ 48.1 cm•Effective viewing area: 410.4 x 256.5 mm •Pixel pitch: 0.285 x 0.285 mm •Brightness: 300 cd/m²•Contrast ratio (typical): 850:1•Display colors: 16.7 M•Viewing angle: 170º (H) / 160º (V), @ C/R > 10•Response time (typical): 5 ms•Maximum Resolution: 1440 x 900 @ 75 Hz •Optimum resolution: 1440 x 900 @ 60 Hz •Video Dot Rate: 140 MHz•Horizontal Scanning Frequency: 30 - 83 kHz •Vertical Scanning Frequency: 55 - 75 Hz •sRGBConnectivity•Signal Input: VGA (Analog ), DVI-D•Sync Input: Composite Sync, Separate Sync, Sync on GreenConvenience•User convenience: On-screen Display •Monitor Controls: Auto, Brightness (Left), Contrast (Right), Menu (OK), Power On/Off •OSD Languages: English, French, Portuguese, Simplified Chinese, Spanish•Other convenience: Kensington lock compatible •Plug & Play Compatibility: DDC 2B, Windows 98/ ME/2000/XP/Vista•Regulatory approvals: CE Mark, E2000, EMC, Energy Star, FCC-B, UL, CSA, MPRII, TCO '99, TÜV/GS, TÜV Ergo•Tilt: -5° to 20°Accessories•Included accessories: AC Power Cord, VGA cable •User ManualDimensions•Box dimensions(W x H x D):520 x 392 x 190 mm•Box dimensions in inch (W x H x D):20.5 x 15.4 x 7.5 inch•Set dimensions(W x H x D):438.5 x 310.4 x 60.5 mm•Set dimensions in inch (W x H x D):17.3 x 12.2 x 2.4 inch•Set dimensions with stand (W x H x D):438.5 x 358 x 211 mm•Set dimensions with stand in inch (W x H x D): 17.3 x 14.1 x 8.3 inch•MTBF: 50,000 (excl. CCFL 40,000) hrs •Relative humidity: 20% - 80%•Temperature range (operation): 0°C to 40°C •Temperature range (storage): -20°C to 60°C •Product weight (+stand): 5 kg•Product weight (+stand) (lb): 11 lb•Weight incl. Packaging: 6.7 kg•Weight incl. Packaging (lb): 14.8 lbPower•Complies with: E2000, Energy Star •Consumption(On mode): 36W (Typical)•Consumption(Off Mode): < 1 W•Power LED indicator: Operation - green, Stand by/ sleep - Amber•Power supply: Built-in, 100-240VAC, 50/60Hz。

显示器用户指南©2010Hewlett-Packard Development Company,L.P.Microsoft、Windows 和 Windows Vista 是Microsoft Corporation 在美国和/或其他国家的商标或注册商标。

HP 产品和服务的所有保修限于这些产品与服务所附带的明确保修声明。

本文的任何条款都不应视作构成保修声明的附加条款。

HP 不对本文的技术性错误、编印错误或疏漏承担任何责任。

本文档包含的所有权信息受版权保护。

未经Hewlett-Packard Company 事先书面许可，不得将本文档的任何部分影印、复制或翻译成其他语言。

第二版（2010 年 1 月)文档部件号：594300-AA2关于本指南本指南提供与安装显示器、安装驱动程序、使用屏幕显示菜单、故障排除和技术规范有关的信息。

警告！此格式的文字表示：如果不按照指示操作可能导致人身伤害，甚至死亡。

注意：此格式的文字表示：如果不按照指示操作可能致使设备损坏或信息丢失。

注：此格式的文字提供重要的附加信息。

iiiiv 关于本指南目录1 产品特性 (1)HP LCD 显示器 (1)2 安全和维护准则 (3)重要安全信息 (3)安全预防措施 (4)维护准则 (5)清洁显示器 (5)装运显示器 (5)3 安装显示器 (6)打开显示器包装 (6)安装显示器 (6)连接显示器电缆 (10)高带宽数字内容保护 (HDCP) (11)连接音频电缆 (12)连接电源线 (13)调整显示器的倾斜角度 (13)调整扭转角度 (14)键盘存放 (15)4 操作显示器 (16)CD 软件和实用程序 (16)安装驱动程序 (16)使用自动调整功能 (17)前面板控制按钮 (18)使用屏幕显示 (OSD) (19)选择视频输入接口 (23)识别显示器状况 (23)调整屏幕质量 (24)省电功能 (24)v附录 A 故障排除 (26)解决常见问题 (26)从 获取支持 (27)准备致电技术支持 (27)查找额定值标签 (28)附录 B 技术规格 (29)HP LCD 显示器 (29)预设视频模式 (33)LCD 显示器质量和像素策略 (35)附录 C 机构规定注意事项 (36)（美国）联邦通信委员会注意事项 (36)修改 (36)电缆 (36)标有 FCC 徽标的产品的一致性声明（仅适用于美国） (36)适用于加拿大的注意事项 (37)Avis Canadien (37)欧盟规程通告 (37)德国人机工程学通告 (38)适用于日本的注意事项 (38)适用于韩国的注意事项 (38)电源线配件要求 (38)适用于日本的电源线要求 (38)产品环境注意事项 (39)废弃物品的处理 (39)日常处理废旧器件的注意事项（适用于欧盟） (39)化学物质 (39)HP 回收办法 (39)有害物质的限制 (RoHS) (39)土耳其 EEE 法规 (40)vi1产品特性HP LCD 显示器HP LCD（液晶显示）显示器采用具备有源矩阵和下列特性的薄膜晶体管 (TFT) 屏幕：●大尺寸屏幕●最大图像分辨率：◦1910m：1366x768@60 赫兹◦2010f：1600x900@60 赫兹◦2010i：1600x900@60 赫兹◦2010m1600x900@60 赫兹◦2210i：1920x1080@60 赫兹◦2210m：1920x1080@60 赫兹◦2310i：1920x1080@60 赫兹◦2310m：1920x1080@60 赫兹◦2510i：1920x1080@60 赫兹◦2710m：1920x1080@60 赫兹◦且支持较低分辨率的全屏显示●VGA 模拟信号●DVI 数字信号●高清晰度多媒体接口 (HDMI)（适用于部分型号）●反应迅捷，玩核心游戏和图形制作时可获得更佳效果●视角宽广，无论是坐着、站着还是从显示器的两侧，均易于观看●动态对比度，提供更深的黑度和更亮的白度以实现出众的色差效果，令玩游戏和观看电影更具特色●倾斜度调整●扭转角度调整HP LCD 显示器1●可拆卸式的底座和符合视频电子标准协会 (Video Electronics Standards Association,VESA) 标准的安装孔，便于进行灵活的安装（包括墙上安装）●安全锁定插槽，用于连接安全锁定电缆（需要单独购买安全电缆）●即插即用功能（如果您的计算机系统支持此功能）●屏幕显示 (OSD) 可调，便于设置和优化屏幕（可选择英文、简体中文、繁体中文、法文、德文、意大利文、西班牙文、荷兰文、日文或巴西葡萄牙文）●内置立体声低音炮扬声器●键盘存放装置●节能装置，有助于减少能源消耗●“快速查看”设置显示●DVI 和 HDMI 输入具有 HDCP（高带宽数字内容保护）（适用于部分型号）●软件和实用程序 CD，其中包含以下内容：◦驱动程序◦自动调整软件◦相关文档2第 1 章 产品特性2安全和维护准则重要安全信息本显示器已附带电源线。

二氧化碳气体传感器（型号：MH-Z19）使用说明书版本号：V1.4实施日期：2016.05.09郑州炜盛电子科技有限公司Zhengzhou Winsen Electronic Technology Co., Ltd声明本说明书版权属郑州炜盛电子科技有限公司（以下称本公司）所有，未经书面许可，本说明书任何部分不得复制、翻译、存储于数据库或检索系统内，也不可以电子、翻拍、录音等任何手段进行传播。

感谢您使用炜盛科技的系列产品。

为使您更好地使用本公司产品，减少因使用不当造成的产品故障，使用前请务必仔细阅读本说明书并按照所建议的使用方法进行使用。

如果您不依照本说明书使用或擅自去除、拆解、更换传感器内部组件，本公司不承担由此造成的任何损失。

您所购买产品的颜色、款式及尺寸以实物为准。

本公司秉承科技进步的理念，不断致力于产品改进和技术创新。

因此，本公司保留任何产品改进而不预先通知的权力。

使用本说明书时，请确认其属于有效版本。

同时，本公司鼓励使用者根据其使用情况，探讨本产品更优化的使用方法。

请妥善保管本说明书，以便在您日后需要时能及时查阅并获得帮助。

郑州炜盛电子科技有限公司MH-Z19二氧化碳传感器MH-Z19二氧化碳气体传感器（以下简称传感器）是一个智能通用型、小型传感器，利用非色散红外（NDIR）原理对空气中存在的CO2进行探测，具有很好的选择性和无氧气依赖性，寿命长。

该传感器是将成熟的红外吸收气体检测技术与精密光路设计、精良电路设计紧密结合而制作出的高性能传感器。

传感器特点高灵敏度、高分辨率、低功耗响应时间快优异的稳定性温度补偿，卓越的线性输出提供UART、PWM波形等输出方式使用寿命长体积小巧抗水汽干扰、不中毒主要应用暖通制冷设备 空气质量监控设备 新风系统空气净化设备 智能家居 其他消费类电子设备技术指标表1产品型号MH-Z19检测气体二氧化碳工作电压 4.0～5.5V DC平均电流 17 mA（@5V供电）峰值电流150 mA（@5V供电）接口电平 3.3V测量范围0~1%VOL范围内可选（详见表2）输出信号UART ， PWM预热时间3min响应时间T90< 45s工作温度0～50℃工作湿度0～95%RH （无凝结）重量 4 g寿命>5年常用量程和精度气体名称分子式量程 精度二氧化碳CO 20~2000ppm ±(50ppm+5%读数值)0~5000ppm传感器尺寸图图1 传感器结构图管脚定义图图2 管脚定义图 MH -Z19引脚定义图 表3管脚名称管脚说明Vin 电源正输入4.0V~5.5V GND 电源负输入/公共地 AOT 预留 PWM PWM 输出HD 校零(400ppm)输入，低电平持续3秒以上有效 SR 预留Tx UART （TXD ） TTL 电平0~3.3V Rx UART （RXD ） TTL 电平0~3.3VVo3.3V 输出，输出电流应控制在10mA 以内输出方式PWM输出假设测量范围为0~2000ppmCO2浓度输出范围0～2000ppm周期1004ms±5%周期起始段高电平输出2ms(理论值)中部周期1000ms±5%周期结束段低电平输出2ms(理论值)通过PWM获得当前CO2浓度值的计算公式：C ppm=2000×(T H-2ms)/(T H+T L-4ms)C ppm为通过计算得到的CO2浓度值，单位为ppmT H为一个输出周期中输出为高电平的时间T L为一个输出周期中输出为低电平的时间串口输出(UART)硬件连接将传感器的Vin-GND-RXD-TXD分别接至用户的5V-GND-TXD-RXD。

334466778999101010111212121213141415目录敬告责任申明介绍 警告及注意事项 安全指示包装清单内容一体式电脑硬件使用说明 部件与接口示意快速安装及适配器使用说明基本操作 开关机 键盘 待机/休眠功能 无线网卡BIOS设置中国电子信息产品污染控制标识要求保修服务条例 三包服务内容 保修说明 免除保修义务售后服务流程发回件注意事项售后服务登记卡 维修记录敬告尊敬的用户：责任声明致谢！武汉攀升鼎承科技有限公司感谢您的购买和使用IPASON品牌一体式电脑,为了您的安全和利益,在使用产品前,请您仔细阅读本产品说明书及随机附带的全部资料。

如果您未按照产品说明书操作和使用产品，而导致任何的人身伤害，财产或其它损失，本公司将不承担责任。

关于本产品使用说明书（以下简称“说明书”）如果您对说明书的任何内容或条款存在不明或异议，请在购机后七日内向本公司提出书面异议，否则视为您已经同意，理解并接受说明书全部内容。

产品使用过程中，如果您遇到问题，欢迎您登陆本公司网站或拨打服务电话4000055360进行咨询。

本公司保留对说明书的解释和修改的权利。

本说明书没有任何形式的担保，立场表达或其它暗示，若有任何因本说明书所提到的产品规格和资讯所引起的直接或间接的信息流失或事业终止，本公司及所属员工恕不为其承担任何责任。

除此之外，本说明书所提到产品规格和资讯仅供参考，包括产品硬件和软件内容，其内容亦会随时更新，恕不另行通知。

说明书版权属于本公司所有；说明书提及的商标，字号属于它们各自的权利拥有者；说明书内容如同实际产品不一致，以实际产品为准。

介绍感谢您购买攀升(IPASON)一体式电脑,在您使用前,请务必仔细阅读并保存本说明书。

警告及注意事项警告：本产品使用了高电压。

不要擅自撬开机器后盖，应向有经验的服务人员要求这方面的服务。

警告：为了预防火灾和电击的危险，请不要把本产品的主部件暴露在雨水或潮湿的空气里面。

红叶石楠扦插养殖技术介绍红叶石楠（Red leaf Photinia）是一种受欢迎的观赏植物，以其美丽的红叶而闻名。

它在园艺领域内被广泛使用，也是一种相对容易繁殖的植物。

下面是红叶石楠扦插养殖技术的介绍。

1.扦插材料选择：选择生长健壮、无病虫害的红叶石楠作为扦插材料。

最好选择直径为5-10mm的扦插枝。

对于2-3年生的枝条，它们的生长力和成活率更高。

2.扦插时间：最佳扦插时间是在春季或秋季，当气温适中，相对湿度较高时进行。

3.扦插培养土准备：红叶石楠的适宜培养土壤为疏松、排水良好的土壤。

可以使用腐熟的泥炭、园土和河沙的混合物作为扦插培养土。

要确保杂质和虫卵等的清除。

4.扦插枝条处理：将扦插枝从母株上剪下，确保它们长度约为15-20厘米。

从扦插枝的顶部剪去2/3的叶子，只保留少量叶子。

这样可以减少水分蒸发，促进营养物质的向根部供应。

同时，将扦插枝的末端修剪成尖锐的斜面，以增加扦插面积。

5.扦插处理：将扦插枝植入盆中，埋入土壤中的2/3深度。

建议使用的扦插盆为带有排水孔的小盆。

将扦插盆放在温暖宜阳的地方，避免阳光直射。

6.保持湿润：扦插后需要保持土壤湿润，但不能过湿。

在生长期间，需要每天适量喷洒水分，确保土壤保持湿润状态。

同时要避免积水，以免扦插枝腐烂。

7.光照和温度：红叶石楠喜欢阳光充足的环境，在扦插期间也是如此。

确保每天有充足的光照可提供充足的能量供给。

温度适宜时，红叶石楠的生长速度会更快，适宜的生长温度为20-30°C。

8.防治病虫害：在扦插过程中要定期检查病虫害，如发现叶子发黄、卷曲或有虫害的情况，可以使用适当的农药进行喷洒，以防止病虫害的影响。

9.移栽和养护：等到扦插枝生根并长出新的叶片后，可以将它们移植到较大的盆中进行进一步的养护。

此后，根据红叶石楠的生长习性，适时修剪枝条，以促进新枝的生长和植株的整体形态。

总之，红叶石楠的扦插繁殖相对简单，但仍需要合理处理扦插材料和相应的养殖技术。

收音环绕扩音机AVR-1910操作说明书注意：·不能用报纸、桌布、窗帘等物品覆盖通风口，以免妨碍通风。

·不能在设备上放置明火火源，如点亮的蜡烛等。

·应注意电池处置的环保问题。

·设备不能暴露在滴水或溅水的环境下使用。

·不能在设备上放置注有液体的物品(如花瓶)。

Ⅰ「根据电子信息产品污染控制管理办法的有毒·有害物质或元素的标识表」零部件名称对象零部件有毒有害物质或元素备注铅(Pb)汞(Hg)镉(Cd)六价铬(Cr6+)多溴联苯(PBB)多溴二苯醚(PBDE)电路板印刷配线板组件，安装·插入零部件，印刷配线板(不包括特定电子零部件)×○×○○○筐体顶盖，底盖，底壳，框架，垫片，小螺丝等(金属，塑胶)，(包含的接合材料)×○○○○○显示器FL，LCD显示器×○○○○○特定电子零部件变压器，插入物，电源插座，电源用大型电解质电容器等电子零部件，机内电缆×○○○○○附件遥控器/AC适配器、电源线、RCA电缆等附件，封装×○○○○○备注：○：在该零部件的所有均质材料中的有毒有害物质的含量不超过在SJ/T11363-2006标准规定的限量要求×：在该零部件中至少一种均质材料中的有毒有害物质的含量超过在SJ/T11363-2006标准规定的限量要求(×判定：包括EU RoHS的豁免项目)此标志是根据2006/2/28颁布的「电子信息产品污染控制管理办法」，以及「电子信息产品污染控制标识要求」，适用于在中国销售的电子信息产品的环保使用期限。

在此产品相关的安全和使用上遵守注意事项，在从生产日期起计算的此年限内，产品中的有害物质不会往外泄漏，或者引起突然变异而给环境污染，人体或财产带来重大影响。

另外，包装在一起的电池等消耗品的环保期限是技术寿命5年。

适当地使用完后废弃的情况，请协助遵守各自治体的电子信息产品回收·再利用相关的法律·规定。

使用说明书说明书中图标的含义•安全指示本资料和投影机采用一些图标来说明如何安全使用本投影机。

为了避免人身伤害或财产损失，请理解并遵守这些注意事项图标。

•一般信息指示说明书中图标的含义 (2)简介投影机的功能 (7)各机型均具有的功能 (7)易于操作 (7)用 USB 电缆连接并投影(USB Display) (7)使用文件摄像机放大和投影文件(仅适用于 EB-1925W/1920W/1915/1910/1830) (7)加强的安装功能 (7)EB-1925W/1915 的功能 (7)演示设置轻而易举 (7)充分利用网络连接的优势 (8)EB-1920W/1910/1830 的功能 (9)充分利用网络连接的优势 (9)不连接计算机投影 JPEG 图像 (幻灯片放映) (9)各部件的名称和功能 (10)前面 / 上面 (10)后面 (EB-1925W/1915) (11)后面 (EB-1920W/1910/1830) (13)后面 (EB-1900) (14)底面 (15)控制面板 (EB-1925W/1915) (15)控制面板 (EB-1920W/1910/1830) (16)控制面板 (EB-1900) (17)遥控器.....................................................18有用功能使用 Screen Fit 校正投影的图像 (仅适用于 EB-1925W/1915) (22)使用 Quick Corner 校正投影图像中的失真 (仅适用于 EB-1925W/ 1915) (25)切换投影图像 (28)自动检测输入信号并切换投影图像(源搜索) (28)通过遥控器切换到目标图像 (29)高级投影功能 (30)选择投影质量(选择颜色模式) (30)设定自动光圈 (31)暂时隐藏图像和关闭声音(A/V无声) (31)暂停图像(静止) (32)改变长宽比 (32)改变方法 (32)改变视频设备图像的外观 (33)改变计算机图像的外观 (EB-1915/1910/1900/1830) (34)改变计算机图像的外观 (EB-1925W/1920W) (35)光标功能(光标) (37)放大部分图像(E变焦) (38)通过遥控器操作鼠标光标(无线鼠标) (39)使用多台投影机时对目标投影机数的限制 (41)设定投影机识别号 (41)设定遥控器识别号 (42)为多台投影机校正颜色(多屏幕调节颜色调节) (44)校正步骤概要 (44)校正方法 (44)安全功能 (45)管理用户(密码保护) (45)密码保护类型 (45)设定密码保护 (45)输入密码 (46)目录3限制操作(控制面板锁定) (46)防盗锁 (48)安装线锁 (48)配置菜单使用配置菜单 (50)功能一览表 (51)图像菜单 (51)信号菜单 (52)设定菜单 (54)扩展菜单 (56)网络菜单(仅适用于 EB-1925W/1915) (58)有关操作网络菜单的注解 (59)软键盘操作 (59)基本菜单 (60)无线 LAN 菜单 (仅当插入随附或选购的无线 LAN 组件时) (61)安全菜单 (当插入随附或选购的无线 LAN 组件时可用) (62)选择 WEP 时 (64)选择 WPA-PSK(TKIP/AES) 或 WPA2-PSK(TKIP/AES) 时 (65)选择 EAP-TLS 时 (66)选择 EAP-TTLS/MD5、EAP-TTLS/MS-CHAPv2、PEAP/MS-CHAPv2、PEAP/GTC、LEAP、EAP-Fast/MS-CHAPv2、EAP-Fast/GTC 时 (66)有线LAN菜单 (66)邮件菜单 (67)其它菜单 (68)重设菜单 (69)网络菜单(仅适用于 EB-1920W/1910/1830) (70)有关操作网络菜单的注解 (71)软键盘操作 (71)基本菜单 (72)有线LAN菜单 (73)邮件菜单 (74)其它菜单 (75)重设菜单 (76)信息菜单(仅适用于显示) (77)重设菜单 (78)故障排除使用帮助 (80)解决问题 (81)读懂指示灯 (81)t指示灯呈红色点亮或闪烁 (82)m o指示灯点亮或闪烁橙光 (83)看了指示灯仍不明白时 (84)与图像有关的问题 (85)投影开始时的问题 (89)其他问题 (89)附录安装方法 (93)清洁 (94)清洁投影机表面 (94)清洁镜头 (94)清洁空气过滤器 (95)更换消耗品 (96)更换遥控器电池 (96)更换灯泡 (97)灯泡更换期 (97)如何更换灯泡 (97)重设灯时 (99)更换空气过滤器 (99)空气过滤器更换期 (99)如何更换空气过滤器 (100)选购件和消耗品 (101)选购件 (101)目录4消耗品 (101)保存用户标识 (102)使用 Wi-Fi Protected Setup 连接无线 LAN 接入点 (仅适用于EB-1925W/1915) (104)连接设定方式 (104)使用按钮方式连接 (105)使用PIN代码方式连接 (106)屏幕尺寸和投影距离 (108)投影距离 (EB-1925W/1920W) (108)投影距离(EB-1915/1910/1900/1830) (109)连接和拆卸 USB 设备(仅适用于 EB-1925W/1920W/1915/1910/1830) (110)连接 USB 设备 (110)拆卸 USB 设备 (110)连接文件摄像机(ELPDC06) (111)拆卸文件摄像机(ELPDC06) (111)用 USB 电缆连接并投影(USB Display) (112)USB Display 的操作条件 (112)连接 (112)首次连接 (113)从第二次开始 (114)连接 LAN 电缆 (仅适用于 EB-1925W/1920W/1915/1910/1830) (115)连接外部设备 (116)连接外部监视器 (仅适用于 EB-1925W/1920W/1915/1910/1830) (116)连接外部扬声器(仅适用于 EB-1925W/1920W/1915/1910/1830) (117)读懂问题邮件通知功能(仅适用于 EB-1925W/1920W/1915/1910/1830) (118)ESC/VP21 命令 (119)命令表 (119)电缆配线 (119)串行连接 (119)通讯协议 (120)关于网络投影机 (仅适用于 EB-1925W/1915) (121)关于 PJLink (仅适用于 EB-1925W/1920W/1915/1910/1830) (122)支持的监视器显示 (123)支持的监视器显示 (EB-1925W/1920W) (123)计算机信号(模拟RGB) (123)分量视频 (124)复合视频/S-视频 (124)来自 HDMI 输入端口的输入信号 (仅适用于 EB-1925W) (125)支持的监视器显示 (EB-1915/1910/1900/1830) (126)计算机信号(模拟RGB) (126)分量视频 (127)复合视频/S-视频 (127)来自 HDMI 输入端口的输入信号 (仅适用于 EB-1915) (127)规格 (129)投影机一般规格 (129)软件要求 (仅适用于 EB-1925W/1920W/1915/1910/1830) (132)外形尺寸图 (134)用语解说 (135)一般告示 (137)一般告示： (137)索引 (155)目录5简介本章介绍投影机的功能和各部件的名称。