下载文档原格式
欧加斯密码锁说明书摘要：一、欧加斯密码锁说明书简介二、密码锁的使用方法1.安装电池2.设置密码3.开锁/关锁三、密码锁的注意事项1.电池更换2.密码修改3.维护保养四、问题处理与售后服务正文：【欧加斯密码锁说明书简介】欧加斯密码锁是一款集安全性和便捷性于一身的高科技产品，通过设置密码，让您轻松实现开关锁。
本说明书将详细介绍欧加斯密码锁的使用方法、注意事项以及问题处理与售后服务，帮助您更好地了解和使用该产品。
【密码锁的使用方法】1.【安装电池】在购买密码锁后，首先需要为锁具安装电池。
请确保使用符合规格的碱性电池，并按照电池仓内的正负极标识正确安装。
安装完毕后，将电池仓盖紧闭。
2.【设置密码】在安装电池后，您可以根据需求设置开锁密码。
操作步骤如下：a) 确保电池仓内已装有电池；b) 按下锁具上的“设置”键，此时绿灯闪烁；c) 按照屏幕上的提示输入初始密码，默认初始密码为“000”；d) 输入新密码，密码长度为6 位，且为数字组合；e) 再次按下“设置”键确认新密码。
3.【开锁/关锁】设置好密码后，您可以按照以下步骤实现开锁/关锁：a) 确保电池仓内已装有电池；b) 按下锁具上的“开锁”键，此时绿灯闪烁；c) 输入设置好的密码；d) 密码正确，绿灯常亮，锁具打开；e) 用手轻轻推动锁体，确保门已完全打开；f) 关闭门后，锁具自动上锁。
【密码锁的注意事项】1.【电池更换】当电池电量较低时，请及时更换电池。
操作步骤如下：a) 打开电池仓盖；b) 取出旧电池；c) 安装新电池，注意正负极标识；d) 关闭电池仓盖。
2.【密码修改】如果您需要修改密码，请参照设置密码的操作步骤进行操作。
3.【维护保养】为了保证密码锁的使用寿命和性能，请定期进行清洁保养。
使用湿布擦拭锁具表面，避免使用含有酒精或其他有机溶剂的清洁剂。
【问题处理与售后服务】如果您在使用过程中遇到问题，请随时联系欧加斯的售后服务团队。
我们将竭诚为您提供专业的技术支持和解决方案。
VEHICULAR MaxiMuM securityslide Gate OperatOrs* models 9235, 9555 and 9556 onlyClose in half the time at 4ft (1.2m) per second *Heavy Duty Gate OperatorsMilitary Facilities - Government Buildings - Airports - Seaports - Border Fences - Prisons - Loading Docks - (Water Treatment, Chemical, Power Plants, Dams, etc.) or for any application where a high degree of perimeter MAxIMUM SECURITyMaxiMuM pOwerontrol Vehicle Model 9235 only.MORE APPLICA TIONS MAXIMUM CHOICESWITH SPEED CONTROLS9200 SeriesFor gates up to 100ft (30.5m) /8000lbs (3.6 metric ton) Fixed or Variable speedK e y F e a t u r e sMechanicalvailable with 10 ga. heavy-duty steel housing.lectronic breaking (high speed operators only).ser can set the speed of the gate from 1/2 to 4 feet/sec. (.15 to 1.2 m/sec.) (dependent on operator model).THE WORKHORSE OFMAXIMUM SECURITYWITH RACE HORSE FEA TURESFor gates up to 160ft (48.8m) /25,000lbs (11.3 metric ton) Variable speed9500 SeriesA c c e s s o r i e sControl StationsGate control stations provide complete manual control. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3-button control station.Loop DetectorsPlug-in detectors (DKS only)Single and dual channel. Pre-fabricated loops available or ENTRAPMENT PREVENTION DEVICES Photo-eyes•hoto-reflective beams • • hru-beam photocells •• Hooded metal enclosure •Slide Gate Accessoriesaccessory transformers, operation and installation.Reversing edges A variety of edge styles for different gates * except 92109200 Series9500 SeriesGate Length Maximum Gate Weight Maximum* Soft Start/Stop * Adjustable Speed Loop Detector Ports Warn Before OperateAnti T ailgating Partial Open Gate Tracker 100 ft (30.5m )8000 Lb. (1.36 m. ton )3333333160 ft (48.8m )25000 Lb. (11.3 m. ton )3333333Model Usage Gate MaximumsFeaturesPowerIndMax Sec LengthWeight Maximum Speed Anti- T ailgating Partial Open HP 9210ü100 Ft. (30.5m)3000 Lb. (1.36 m. ton) 1 Ft/Sec (.3 m/sec)üü19220üü100 Ft. (30.5m)2000 Lb. (.9 m. ton) 2 Ft/Sec (.6 m/sec)üü29230üü100 Ft. (30.5m)5000 Lb. (2.27 m. ton) 2 Ft/Sec (.6 m/sec)üü39235üü100 Ft. (30.5m)3000 Lb. (1.36 m. ton)4 Ft/Sec (1.2 m/sec)üü39240üü100 Ft. (30.5m)8000 Lb. (3.6 m. ton) 2 Ft/Sec (.6 m/sec)üü39530üü160 Ft. (48.7m)10,000 Lb. (4.5 m. ton) 2 Ft/Sec (.6 m/sec)üü39550ü160 Ft. (48.7m)20,000 Lb. (9 m. ton) 1 Ft/Sec (.3 m/sec)üü59555ü160 Ft. (48.7m)10,000 Lb. (4.5 m. ton) 4 Ft/Sec (1.2 m/sec)üü59575ü160 Ft. (48.7m)25,000 Lb.(11.3 m. ton)2 Ft/Sec (.6 m/sec)üü7.5。
01 DoorsChapter软件获取途径官方网站下载授权渠道获取通过IBM官方授权的销售渠道或合作伙伴获取DOORS软件。
安装步骤详解解压安装包运行安装程序选择安装目录配置安装选项完成安装配置环境变量添加DOORS_HOME环境变量将DOORS软件的安装目录添加到系统的环境变量中，变量名为DOORS_HOME。
配置Path环境变量将DOORS_HOME/bin目录添加到系统的Path环境变量中，以便在命令行中直接运行DOORS命令。
常见问题解决方案安装失败无法启动软件缺少DLL文件软件运行缓慢02DXL基础概念与语法ChapterDXL概述数据类型与变量01020301 02 03DXL提供了丰富的运算符，包括算术运算符、比较运算符、逻辑运算符等。
表达式由操作数和运算符组成，用于计算并返回结果。
在DXL中，可以使用括号来改变表达式的运算顺序。
运算符与表达式控制结构字实现。
A B C D03DXL进阶功能与应用Chapter函数定义与调用函数定义函数调用返回值数组、列表和字典操作数组列表字典文件打开与关闭文件读取文件写入使用`open`函数打开文件，并指定打开模式（如读取、写入等）。
使用`close`函数关闭文件。
文件读写操作错误处理和调试技巧异常捕获与处理01错误日志记录02调试工具使用0304 DoorsChapter创建和打开数据库创建数据库打开数据库数据导入导出方法数据导入数据导出查询语句编写技巧基本查询语句条件查询排序和分组数据库备份与恢复备份数据库恢复数据库05DXL在自动化测试中的应用Chapter选择合适的自动化测试工具根据项目需求和资源情况，选择适合的自动化测试工具，如Selenium 、Appium 等。
搭建自动化测试环境配置测试所需的软硬件环境，包括操作系统、浏览器、测试工具等。
编写自动化测试脚本使用DXL 编写自动化测试脚本，实现测试用例的自动化执行。
自动化测试框架搭建0302011 2 3明确测试目标设计合理的测试场景编写清晰的测试步骤和预期结果测试用例编写规范测试结果分析与报告生成执行自动化测试脚本运行编写好的自动化测试脚本，收集测试结果。
Engine Family NamesOne of the pieces of information fleets are required to report to the California Air Resources Board (CARB), as part of initial reporting under the In-Use Off-Road Diesel-Fueled Fleets Regulation (Off-Road Regulation), is the engine family name.What is the engine family name?The engine family name is an identifier assigned by the U.S. Environmental Protection Agency (U.S. EPA) to every engine verified to Tier 1 emission standards or higher. Engine standards were implemented in the mid-1990s. Engines without a standard are considered Tier 0 engines, and will not have an engine family name. Engine family names are generally 11 to 12 digits long for off-road diesel vehicles, such as the example listed below. Note that although most engines families will have periods as the seventh or eighth character, those with displacement listed in cubic inches will not, or the period may be hard to see on the label.Example Engine Family: 4DDXL14.0VLDThe ‘engine family name’ required for reporting refers to this identifier, which is unique to an engine of a specific model year, build, and manufacturer. The engine family name does not refer to the engine Tier, or the manufacturer’s production‘family’ of engines (i.e. the 650 series engines).Where would I find the engine family name?The engine family name is usually listed on the engine label, as shown below. As shown in the top right picture, it may be stamped into the label, which may make the family name difficult to read.While this document is intended to assist fleets with their compliance efforts, it does not alter or modify the terms of any CARB regulation, nor does it constitute legalWhile this document is intended to assist fleets with their compliance efforts, it does not alter or modify the terms of any CARB regulation, nor does it constitute legalHowever, the engine label may also list the manufacturer’s production family of engines, as shown in the example below. This is NOT the engine family name required by CARB. If the engine family listed is not at least 10 digits, and in the format shown above in the examples, it is not the engine family required when reporting engine information to CARB.INCORRECTIf the engine label does not list the U.S. EPA-issued engine family name, the manufacturer of your engine may be able to assist you in determining the engine family name if you are able to supply information on the model year and make of the engine, or the engine serial number. Some manufacturers also have online tools where their customer can enter engine serial numbers and determine the engine family name.What if I have a Tier 0 with no engine family name, or it is not labeled on my engine?For Tier 0 equipment, you should leave the engine family name blank when reporting to CARB. Do not list it as “Tier 0” or “N/A”. Simply leave the field blank. For Tier 1 or newer engines for which you cannot find the engine family name and are unable to receive help from the manufacturer or dealer, you may also leave the field blank and report to ARB. Do not list the field as “Could not find it” or “Missing”, simply leave the field blank.More information on the engine family name format:The engine family name designations include abbreviations which denote the model year, manufacturer, engine production type, displacement, and then an arbitrary sequence to make the family name unique. More information is available in Appendix D of the Certification Guidance, which begins on page 65 and may be found online at https:///diesel/documents/ciguide.pdf. Displacement:One of the additional pieces of information fleets are required to report is the engine displacement, which can sometimes be difficult to find. If you cannot find theWhile this document is intended to assist fleets with their compliance efforts, it does not alter or modify the terms of any CARB regulation, nor does it constitute legaldisplacement labeled on the vehicle or engine, but have the engine family name, you may be able to take the displacement from the engine family name. The displacement is generally listed as the sixth through ninth characters, for example foran engine with a family name “4DDXL14.0VLD”, the displacement is 14.0 liters. If there is no decimal, the displacement is listed in cubic inches and should be converted to liters by multiplying it by 0.0164.For more information on reporting, refer to our other user guides, which are available in the Off-Road Zone at:/offroadzone.If you require additional assistance or information, please contact the DOORS hotline at (877) 59DOORS (877-593-6677) or ************.gov.While this document is intended to assist fleets with their compliance efforts, it does not alter or modify the terms of any CARB regulation, nor does it constitute legal。
