当前位置:文档之家 > NRLR332M16V22X25X30X40F中文资料

NRLR332M16V22X25X30X40F中文资料

150

®

NIC COMPONENTS CORP. www .niccomp. com www .lowESR. com www .RFpassives. com www .SMTmagnetics. com

Operating Temperature Range-40 ~ +85°C-25 ~ +85°C

Rated Voltage Range10 ~ 250Vdc315 ~ 450VdcRated Capacitance Range180 ~ 82,000µF 56 ~ 1,000µF Capacitance Tolerance±20% (M)Max. Leakage Current (µA)

After 5 minutes (20°C)

µF)V

Max. Tan δ

at 120Hz/20°CW.V. (Vdc)10162535506380100160~400420~450

Tan δ max.

0.550.500.450.400.350.300.250.200.150.25Surge Voltage

W.V. (Vdc)1016

NRLR332M16V22X25X30X40F中文资料

2535506380100160180S.V. (Vdc)132032446379100125200

220W.V. (Vdc)200220250315350385400420450-S.V. (Vdc)250270300365400435450470500-Ripple Current

Correction FactorsFrequency (Hz)50 (60)1205001K -----Multiplier at 85°C

10 ~ 100Vdc0.901.001.051.101.15-----160 ~ 250Vdc0.801.001.201.301.50-----315 ~ 450Vdc0.801.001.201.251.40-----Low Temperature

Stability (10 to 250Vdc)

Temperature (°C)0-25-40-------Capacitance Change-5%-15%-30%-------Impedance Ratio1.5312-------

Load Life Test

3,000 hours at +85°C

Capacitance ChangeWithin ±20% of initial measured value

Tan δLess than 200% of specifi ed maximum value

Leakage CurrentLess than specifi ed maximum valueShelf Life Test

1,000 hours at +85°C(no load)Capacitance ChangeWithin ±20% of initial measured valueTan δLess than 200% of specifi ed maximum value

Leakage CurrentLess than specifi ed maximum valueSurge Voltage TestPer JIS-C-5141 (table #6, #4)Surge voltage applied: 30 seconds

"On" and 5.5 minutes no voltage "Off"

Capacitance ChangeWithin ±20% of initial measured valueTan δLess than 200% of specifi ed maximum valueLeakage CurrentLess than specifi ed maximum valueSoldering Effect

Refer to JISC5102.8.5Capacitance ChangeWithin ±10% of initial measured valueTan δLess than specifi ed maximum valueLeakage CurrentLess than specifi

NRLR332M16V22X25X30X40F中文资料

ed maximum value

Large Can Aluminum Electrolytic Capacitors

NRLR Series

FEATURES

• EXPANDED VALUE RANGE

• LONG LIFE AT +85°C (3,000 HOURS)• HIGH RIPPLE CURRENT

• LOW PROFILE, HIGH DENSITY DESIGN

• SUITABLE FOR SWITCHING POWER SUPPLIESSPECIFICATIONS

MECHANICAL CHARACTERISTICS:1. Safety Vent:

The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit mal f unc t ion or mis-use like reverse voltage.2. Terminal Strength:

Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds.

PRECAUTIONS

Please review the notes on correct use, safety and precautions found on pages T10 & T11

of NIC’s Electrolytic Capacitor catalog. Also found at http://www.doczj.com/doc/f91db080680203d8cf2f2406.html /precautions

If in doubt or uncertainty, please review your specifi c application - process details with

NIC’s technical support personnel: tpmg@http://www.doczj.com/doc/f91db080680203d8cf2f2406.html

Notice for Mounting

The space from the top of the can shall be more than (3mm) from chassis or other construc
tion materials so that safety vent has room to expand in case of emer g en c y.

The space from the top of the can shall be more than (3mm) from chassis or other construction materials so that safety vent has room to expand in case of emer g en c y.

Recommended PC Board Mounting Holes:

Sleeve Color: Dark Blue

Can Top Safety Vent

Insulation Sleeve and Minus Polarity Marking

D+1Max.

L ± 2

4.0 ± 1or 6.3 ± 1

0SAFETY VENT∅= 2 Chassis

RoHS Compliant

includes all homogeneous materials

*See Part Number System for Details

元器件交易网http://www.doczj.com/doc/f91db080680203d8cf2f2406.html

下载Word文档免费下载:

NRLR332M16V22X25X30X40F中文资料下载

(共11页)

TOP相关主题