检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-3BW-228 (BG)
FCAW 2950NRDD Acc.LN-F12-4BW-228 (BG)FCAW 2950
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
SUBSEA 7PETROBRAS 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001)4O F12 Block Receptacle Assembly 返修报告编号LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
≥4.5Kg NVD36MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
审核(Review)
DNV/TPI ASMI-M-021AC MT-BW FA-5(white)Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S Repair Report No.UNDERSIDE BLANK Wet Powder Continuous method 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-0013 SEC LN-F122012.09.07Subsea 7TABLE 6.1As Weld A1-30/100100%AWS D1.1-2010WS303LN.43F1247G
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-2BW-228 (BG)FCAW 2950
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS Repair Report No.UNDERSIDE BLANK Wet Powder Continuous method 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
As Weld AC FA-5(white)WS303LN.43F1247G O 4F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC 返修报告编号2012.09.11LN-F12100%TABLE 6.1ASMI-M-018MT-BW AWS D1.1-2010MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-002Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg NVD36
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-4Lifting eye FCAW 6000
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
≥4.5Kg NVD36MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method 报告编号Report No.:MT-RA-BG-LN-F-003Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S 100%TABLE 6.1LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.09.29ASMI-M-021MT-BW WS303LN.43F1247G O UNDERSIDE BLANK 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-2-1FP-197FCAW 2721
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-004MAGNETIC PARTICLE INSPECTION REPORT
FA-5(white)2012.09.29100%TABLE 6.1ASMI-M-021Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MT-BW Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method API2W50Z-NVD36LN-F12AWS D1.1-2010As Weld AC WS303LN.43F1247G O 7F12 Block Receptacle Assembly 返修报告编号Repair Report No.UNDERSIDE BLANK 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-4-2FP-174
FCAW 2721NRDD Acc.LN-1-1FP-197
FCAW 2721NRDD Acc.LN-4-1FP-197
FCAW 2721NRDD Acc.LN-3-2FP-174
FCAW 2721NRDD Acc.LN-2-2FP-174FCAW 2721
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
Wet Powder Continuous method 返修报告编号Repair Report No.UNDERSIDE BLANK 2012..9.30AC FA-5(white)WS303LN.43F1247G B 7F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC AWS D1.1-2010As Weld API2W50Z-NVD36LN-F12100%TABLE 6.1ASMI-M-021MT-BW AWS D1.1-2010B310S 工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-005Qingdao Wuchuan HeavyIndustryco.,Ltd ≥4.5Kg MAGNETIC PARTICLE INSPECTION REPORT
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-F12-3BW-003FCAW 400NRDD Acc.
LN-F12-3BW-004FCAW 400NRDD Acc.
LN-F12-3BW-005FCAW 400NRDD Acc.
LN-F12-3BW-006FCAW 400NRDD Acc.
LN-F12-3BW-007FCAW 400NRDD Acc.
LN-F12-3BW-008FCAW 400NRDD Acc.
LN-F12-3BW-009FCAW 400NRDD Acc.
LN-F12-3BW-010FCAW 400NRDD Acc.
LN-F12-3BW-011FCAW 400NRDD Acc.
LN-F12-3BW-012FCAW 400NRDD Acc.
LN-F12-3BW-013FCAW 400NRDD Acc.
LN-F12-3BW-014FCAW 400NRDD Acc.
LN-F12-3BW-015FCAW 400NRDD Acc.
LN-F12-3BW-016FCAW 400NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
≥4.5Kg NVD36MAGNETIC PARTICLE INSPECTION REPORT
100%TABLE 6.1ASMI-M-019MT-BW 工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-006
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S Subsea 7 A1-30/100 3 SEC AWS D1.1-2010As Weld AC Wet Powder Continuous method LN-F12FA-5(white)2012.10.06返修报告编号Repair Report No.WS303LN.43F1247G B 4F12 Block Receptacle Assembly LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-F12-3BW-017FCAW 400NRDD Acc.
LN-F12-3BW-018FCAW 400NRDD Acc.
LN-F12-3FP-019FCAW 2338NRDD Acc.
LN-F12-3FP-020FCAW 2338NRDD Acc.
LN-F12-3FP-021FCAW 2338NRDD Acc.
LN-F12-3FP-022FCAW 2338NRDD Acc.
LN-F12-3FP-023FCAW 2338NRDD Acc.
LN-F12-3FP-024FCAW 2338NRDD Acc.
LN-F12-3FP-025FCAW 2338NRDD Acc.
LN-F12-3FP-026FCAW 2338NRDD Acc.
LN-F12-3FP-027FCAW 2338NRDD Acc.
LN-F12-3FP-028FCAW 2338NRDD Acc.
LN-F12-3FP-029FCAW 2338NRDD Acc.
LN-F12-3FP-030FCAW 2338NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-007
FA-5(white)2012.10.06100%TABLE 6.1ASMI-M-019Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MT-BW Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC WS303LN.43F1247G B 4F12 Block Receptacle Assembly 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-3FP-031
FCAW 2388NRDD Acc.LN-F12-3FP-032
FCAW 2388NRDD Acc.LN-F12-3FP-033
FCAW 2388NRDD Acc.LN-F12-3FP-034FCAW 2388
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-008Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010MT-BW ≥4.5Kg NVD36/API2W50Z MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
Subsea 7 A1-30/100 3 SEC 100%TABLE 6.1ASMI-M-019Repair Report No.AWS D1.1-2010B310S F12 Block Receptacle Assembly As Weld AC FA-5(white)Wet Powder Continuous method 返修报告编号UNDERSIDE BLANK LN-F122012.10.06WS303LN.43F1247G B 4注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-4-2FP-146FCAW 280NRDD Acc.
LN-4-2FP-147FCAW 280NRDD Acc.
LN-4-2FP-148FCAW 280NRDD Acc.
LN-4-2FP-149FCAW 280NRDD Acc.
LN-4-2FP-150FCAW 280NRDD Acc.
LN-4-2FP-151FCAW 280NRDD Acc.
LN-4-2FP-152FCAW 280NRDD Acc.
LN-4-2FP-139FCAW 110NRDD Acc.
LN-4-2FP-140FCAW 110NRDD Acc.
LN-4-2FP-141FCAW 110NRDD Acc.
LN-4-2FP-142FCAW 110NRDD Acc.
LN-4-2FP-143FCAW 110NRDD Acc.
LN-4-2FP-144FCAW 110NRDD Acc.
LN-4-2FP-145FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
WS303LN.43F1247G B 7F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.07100%TABLE 6.1ASMI-M-017MT-BW MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-009
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg NVD36/API2W50Z
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-3-1FP-111FCAW 280NRDD Acc.
LN-3-1FP-112FCAW 280NRDD Acc.
LN-3-1FP-113FCAW 280NRDD Acc.
LN-3-1FP-114FCAW 280NRDD Acc.
LN-3-1FP-115FCAW 280NRDD Acc.
LN-3-1FP-116FCAW 280NRDD Acc.
LN-3-1FP-117FCAW 280NRDD Acc.
LN-3-1FP-118FCAW 110NRDD Acc.
LN-3-1FP-119FCAW 110NRDD Acc.
LN-3-1FP-120FCAW 110NRDD Acc.
LN-3-1FP-121FCAW 110NRDD Acc.
LN-3-1FP-122FCAW 110NRDD Acc.
LN-3-1FP-123FCAW 110NRDD Acc.
LN-3-1FP-124FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
≥4.5Kg NVD36/API2W50Z MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-010
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S Subsea 7 A1-30/100 3 SEC 100%TABLE 6.1ASMI-M-017AWS D1.1-2010As Weld AC Wet Powder Continuous method LN-F12FA-5(white)2012.10.07MT-BW 返修报告编号WS303LN.43F1247G B 7F12 Block Receptacle Assembly Repair Report No.LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-4-1FP-111FCAW 280NRDD Acc.
LN-4-1FP-112FCAW 280NRDD Acc.
LN-4-1FP-113FCAW 280NRDD Acc.
LN-4-1FP-114FCAW 280NRDD Acc.
LN-4-1FP-115FCAW 280NRDD Acc.
LN-4-1FP-116FCAW 280NRDD Acc.
LN-4-1FP-117FCAW 280NRDD Acc.
LN-4-1FP-118FCAW 110NRDD Acc.
LN-4-1FP-119FCAW 110NRDD Acc.
LN-4-1FP-120FCAW 110NRDD Acc.
LN-4-1FP-121FCAW 110NRDD Acc.
LN-4-1FP-122FCAW 110NRDD Acc.
LN-4-1FP-123FCAW 110NRDD Acc.
LN-4-1FP-124FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-011
FA-5(white)2012.10.07100%TABLE 6.1ASMI-M-017Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MT-BW Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC WS303LN.43F1247G B 7F12 Block Receptacle Assembly 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-2-1FP-111FCAW 280NRDD Acc.
LN-2-1FP-112FCAW 280NRDD Acc.
LN-2-1FP-113FCAW 280NRDD Acc.
LN-2-1FP-114FCAW 280NRDD Acc.
LN-2-1FP-115FCAW 280NRDD Acc.
LN-2-1FP-116FCAW 280NRDD Acc.
LN-2-1FP-117FCAW 280NRDD Acc.
LN-2-1FP-118FCAW 110NRDD Acc.
LN-2-1FP-119FCAW 110NRDD Acc.
LN-2-1FP-120FCAW 110NRDD Acc.
LN-2-1FP-121FCAW 110NRDD Acc.
LN-2-1FP-122FCAW 110NRDD Acc.
LN-2-1FP-123FCAW 110NRDD Acc.
LN-2-1FP-124FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
≥4.5Kg NVD36/API2W50Z MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-012
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S Subsea 7 A1-30/100 3 SEC 100%TABLE 6.1ASMI-M-017AWS D1.1-2010As Weld AC FA-5(white)2012.10.06MT-BW Wet Powder Continuous method LN-F12返修报告编号Repair Report No.WS303LN.43F1247G B 7F12 Block Receptacle Assembly LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-1-1FP-111FCAW 280NRDD Acc.
LN-1-1FP-112FCAW 280NRDD Acc.
LN-1-1FP-113FCAW 280NRDD Acc.
LN-1-1FP-114FCAW 280NRDD Acc.
LN-1-1FP-115FCAW 280NRDD Acc.
LN-1-1FP-116FCAW 280NRDD Acc.
LN-1-1FP-117FCAW 280NRDD Acc.
LN-1-1FP-118FCAW 110NRDD Acc.
LN-1-1FP-119FCAW 110NRDD Acc.
LN-1-1FP-120FCAW 110NRDD Acc.
LN-1-1FP-121FCAW 110NRDD Acc.
LN-1-1FP-122FCAW 110NRDD Acc.
LN-1-1FP-123FCAW 110NRDD Acc.
LN-1-1FP-124FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-013
FA-5(white)2012.10.06100%TABLE 6.1ASMI-M-017Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MT-BW Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC WS303LN.43F1247G B 7F12 Block Receptacle Assembly 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-1-2FP-146FCAW 280NRDD Acc.
LN-1-2FP-147FCAW 280NRDD Acc.
LN-1-2FP-148FCAW 280NRDD Acc.
LN-1-2FP-149FCAW 280NRDD Acc.
LN-1-2FP-150FCAW 280NRDD Acc.
LN-1-2FP-151FCAW 280NRDD Acc.
LN-1-2FP-152FCAW 280NRDD Acc.
LN-1-2FP-139FCAW 110NRDD Acc.
LN-1-2FP-140FCAW 110NRDD Acc.
LN-1-2FP-141FCAW 110NRDD Acc.
LN-1-2FP-142FCAW 110NRDD Acc.
LN-1-2FP-143FCAW 110NRDD Acc.
LN-1-2FP-144FCAW 110NRDD Acc.
LN-1-2FP-145FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
≥4.5Kg NVD36/API2W50Z MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-014
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S Subsea 7 A1-30/100 3 SEC 100%TABLE 6.1ASMI-M-017AWS D1.1-2010As Weld AC FA-5(white)2012.10.06MT-BW Wet Powder Continuous method LN-F12返修报告编号Repair Report No.WS303LN.43F1247G B 7F12 Block Receptacle Assembly LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-3BW-001
FCAW 9734NRDD Acc.LN-F12-3BW-227FCAW 600
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS 返修报告编号Repair Report No.UNDERSIDE BLANK 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
ASMI-M-021MT-BW WS303LN.43F1247G B 4F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-015NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.08100%TABLE 6.1
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-2-2FP-146FCAW 280NRDD Acc.
LN-2-2FP-147FCAW 280NRDD Acc.
LN-2-2FP-148FCAW 280NRDD Acc.
LN-2-2FP-149FCAW 280NRDD Acc.
LN-2-2FP-150FCAW 280NRDD Acc.
LN-2-2FP-151FCAW 280NRDD Acc.
LN-2-2FP-152FCAW 280NRDD Acc.
LN-2-2FP-139FCAW 110NRDD Acc.
LN-2-2FP-140FCAW 110NRDD Acc.
LN-2-2FP-141FCAW 110NRDD Acc.
LN-2-2FP-142FCAW 110NRDD Acc.
LN-2-2FP-143FCAW 110NRDD Acc.
LN-2-2FP-144FCAW 110NRDD Acc.
LN-2-2FP-145FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
ASMI-M-017工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-016
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg Wet Powder Continuous method NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.07100%TABLE 6.1MT-BW WS303LN.43F1247G B 7F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC 返修报告编号Repair Report No.注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-3-2FP-146FCAW 280NRDD Acc.
LN-3-2FP-147FCAW 280NRDD Acc.
LN-3-2FP-148FCAW 280NRDD Acc.
LN-3-2FP-149FCAW 280NRDD Acc.
LN-3-2FP-150FCAW 280NRDD Acc.
LN-3-2FP-151FCAW 280NRDD Acc.
LN-3-2FP-152FCAW 280NRDD Acc.
LN-3-2FP-139FCAW 110NRDD Acc.
LN-3-2FP-140FCAW 110NRDD Acc.
LN-3-2FP-141FCAW 110NRDD Acc.
LN-3-2FP-142FCAW 110NRDD Acc.
LN-3-2FP-143FCAW 110NRDD Acc.
LN-3-2FP-144FCAW 110NRDD Acc.
LN-3-2FP-145FCAW 110NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001)审核(Review)
DNV/TPI SUBSEA 7PETROBRAS Repair Report No. Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
As Weld AC FA-5(white)WS303LN.43F1247G B 7F12 Block Receptacle Assembly 返修报告编号Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg 2012.10.09Subsea 7 A1-30/100AWS D1.1-2010MAGNETIC PARTICLE INSPECTION REPORT
NVD36/API2W50Z 100%TABLE 6.1ASMI-M-017MT-BW LN-F12工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-017
3 SEC Wet Powder Continuous method
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-2BW-001
FCAW 9734NRDD Acc.LN-F12-2BW-227FCAW 600
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS 返修报告编号Repair Report No.UNDERSIDE BLANK 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
WS303LN.43F1247G B 4F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.09100%TABLE 6.1ASMI-M-021MT-BW Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-018NVD36/API2W50Z
检测地点验收标准仪器型号提升力 材质Test Location
Accept Criteria Instrument Type Lifting Power Material 检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade
Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition
Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block
Magnetization Time Magnetization Method 图纸号版本号页数组件名称Drawing No.Rev.No.
Page Part Name 序号焊缝号焊工号
焊接方法焊缝长度缺陷性质缺陷长度结果No.Welding No.Welder No.
Welding Process Weld Length (mm)Defects Defect Length (mm)Result LN-F12-4BW-001
FCAW 9734NRDD Acc.LN-F12-4BW-227FCAW 600
NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects
委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-019Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg NVD36/API2W50Z LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.10100%TABLE 6.1ASMI-M-021MT-BW Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method WS303LN.43F1247G B 4F12 Block Receptacle Assembly 返修报告编号Repair Report No.UNDERSIDE BLANK 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.
审核(Review)
DNV/TPI SUBSEA 7PETROBRAS
检测地点验收标准仪器型号提升力 材质Test Location Accept Criteria Instrument Type Lifting Power Material
检测比例合格级别仪器编号磁粉分段号Testing Rate Acceptance Grade Instrument No.Magnetic Particle Block No.焊接标准表面状态磁轭类型反差剂检测日期Weld standard Surface Condition Yoke Type Contrast Agent Testing Date 客户名称灵敏度试块磁化时间磁化方法Client Sensitivity Block Magnetization Time Magnetization Method
图纸号版本号页数组件名称Drawing No.Rev.No.Page Part Name
序号焊缝号焊工号焊接方法焊缝长度缺陷性质缺陷长度结果
No.Welding No.Welder No.Welding Process Weld Length (mm)Defects Defect Length (mm)Result
LN-F12-4BW-003FCAW 400NRDD Acc.
LN-F12-4BW-004FCAW 400NRDD Acc.
LN-F12-4BW-005FCAW 400NRDD Acc.
LN-F12-4BW-006FCAW 400NRDD Acc.
LN-F12-4BW-007FCAW 400NRDD Acc.
LN-F12-4BW-008FCAW 400NRDD Acc.
LN-F12-4BW-009FCAW 400NRDD Acc.
LN-F12-4BW-010FCAW 400NRDD Acc.
LN-F12-4BW-011FCAW 400NRDD Acc.
LN-F12-4BW-012FCAW 400NRDD Acc.
LN-F12-4BW-013FCAW 400NRDD Acc.
LN-F12-4BW-014FCAW 400NRDD Acc.
LN-F12-4BW-015FCAW 400NRDD Acc.
LN-F12-4BW-016FCAW 400NRDD Acc.
备注
Remarks 检验员(Inspector)签字Sign:
日期Date:
MAGNETIC PARTICLE INSPECTION REPORT
工程名称Project Name: GUARA and LULA-NE Projects 委托单编号 NDT Request No:报告编号Report No.:MT-RA-BG-LN-F-020
Qingdao Wuchuan HeavyIndustryco.,Ltd AWS D1.1-2010B310S ≥4.5Kg NVD36LN-F12AWS D1.1-2010As Weld AC FA-5(white)2012.10.11100%TABLE 6.1ASMI-M-019MT-BW WS303LN.43F1247G B 4F12 Block Receptacle Assembly Subsea 7 A1-30/100 3 SEC Wet Powder Continuous method 返修报告编号Repair Report No.审核(Review)
DNV/TPI SUBSEA 7PETROBRAS 注(Notes): 此MT 报告的检测程序符合磁粉检测程序 D99110M-G-K-PA-001(This MT report testing procedures accords with Magnetic testing procedures D99110M-G-K-PA-001) 此MT 报告的检测方法符合AWS D1.1标准规定(This MT report testing method accords with AWS D1.1)
LOF:未熔合(Lack of Fusion) LOP:未焊透(Lack of Penetration) C:裂纹(Crack)S.I:夹渣(Slag Inclusion) P:气孔(Porosity)NRDD:未发现须记录缺陷(NO Recordable Defects Detected) Acc.:合格(Accept) Rej.:拒收(Rejection) BG:背扣(Back Gouging)*:Detected defects after grinding only MT is OK.