PHOTOCOUPLER
PS2533-1,-2,-4,PS2533L-1,-2,-4
HIGH COLLECTOR TO EMITTER VOLTATGE
HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES
?NEPOC Series ?
DESCRIPTION
The PS2533-1, -2, -4 and PS2533L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor.
The PS2533-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2533L-1, -2, -4 are lead bending type (Gull-wing) for surface mount.
FEATURES
? High collector to emitter voltage (V CEO = 350 V) ? High Isolation voltage (BV = 5 000 Vr.m.s.) ? High current transfer ratio (CTR = 4 000 % TYP.) ? High-speed switching (t r, t f = 100 μs TYP.)
? Ordering number of tape product: PS2533L-1-E3, E4, F3, F4, PS2533L-2-E3, E4 ? Safety standards ? UL approved: File No. E72422 (S) ? BSI approved: No. 8221/8222 ? CSA approved: No. CA 101391 ? NEMKO approved: No. P9******* ? SEMKO approved: No. 9824187/01-02 ? DEMKO approved: No. 307863 ? FIMKO approved: No. F1 11397 ? VDE0884 approved (Option)
APPLICATIONS
? Telephone, Exchange equipment ? FAX/MODEM
The mark shows major revised points.
Document No. PN10233EJ01V0DS (1st edition) (Previous No. P11435EJ6V0DS00) Date Published February 2003 CP(K)
PACKAGE DIMENSIONS (Unit : mm)
DIP Type (New package)
PS2533-1
TOP VIEW
3.5±0.3
4.15±0.4
3.2±0.4 2.54
1.25±0.15
0.50±0.100.25 M
4.6±0.35
6.5±0.5
0 to 15?7.62
0.25+0.1
–0.05
1
24
3
1. Anode
2. Cathode
3. Emitter
4. Collector
Caution New package 1-ch only
DIP Type
PS2533-4
PS2533-1
TOP VIEW
TOP VIEW
9.7±0.5
6.5±0.5
3.5±0.3
4.15±0.4
3.3±0.5 2.54
1.25±0.15
0.50±0.100.25 M
0 to 15?7.62
0.25+0.1
–0.05
PS2533-2
4.6±0.5
6.5±0.5
3.5±0.3
4.15±0.4
3.3±0.5 2.54
1.25±0.15
0.50±0.100.25 M
0 to 15?7.62
0.25+0.1
–0.05
19.8±0.5
6.5±0.5
0 to 15?7.62
0.25+0.1
–0.05
3.5±0.3
4.15±0.4
3.3±0.5 2.54
1.25±0.15
0.50±0.100.25 M
TOP VIEW
1
24
3
123
45678
161514131211109
12
348
7
6
5
1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector
1. Anode
2. Cathode
3. Emitter
4. Collector
1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector
Data Sheet PN10233EJ01V0DS
2
Lead Bending Type (New package)
PS2533L-1
TOP VIEW
0.25 M
4.6±0.35
6.5±0.5
3.5±0.3
2.54
1.25±0.15
0.15
0.9±0.25
9.60±0.4
0.25+0.1 –0.05
0.1+0.1 –0.05
1
2
4
3
1. Anode
2. Cathode
3. Emitter
4. Collector
Caution New package 1-ch only
Lead Bending Type
PS2533L-2
TOP VIEW
PS2533L-1
TOP VIEW
PS2533L-4
TOP VIEW
4.6±0.5
6.5±0.5
0.25 M
3.5±0.3
2.54
1.25±0.15
0.15
0.9±0.25
9.60±0.4
0.25+0.1 –0.05
0.1+0.1
–0.05
9.7±0.5
6.5±0.5
2.541.25±0.150.25 M
0.15
3.5±0.3
0.9±0.259.60±0.4
0.25+0.1
–0.05
0.1+0.1 –0.05
19.8±0.5
6.5±0.5
2.541.25±0.150.25 M
3.5±0.3
0.15
0.9±0.25
9.60±0.4
0.25+0.1 –0.05
0.1+0.1 –0.05
1
24
3
1
2345678
161514131211109
1
234
8
7
6
5
1, 3. Anode
2, 4. Cathode 5, 7. Emitter 6, 8. Collector
1. Anode
2. Cathode
3. Emitter
4. Collector
1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector
Data Sheet PN10233EJ01V0DS 3
MARKING EXAMPLE
2533M 003
PS2533-2M 003
E
F PS2533-1
PS2533-2, -4
Assembly Lot
Week Assembled Year Assembled (Last 1 Digit)In-house Code CTR Rank Code No. 1 pin Mark
Package New PKG
Standard PKG Made in Japan Made in Taiwan No. 1 pin Mark
M F
Week Assembled Year Assembled (Last 1 Digit)In-house Code CTR Rank Code
Package New PKG
Standard PKG Made in Japan Made in Taiwan
003
M 003Blank Blank Country Assembled Type Number Assembly Lot
Data Sheet PN10233EJ01V0DS
4
ORDERING INFORMATION (Solder Contains Lead)
Part Number Package Packing Style Safety Standard
Approval Application Part Number*1
PS2533-1 4-pin DIP Magazine case 100 pcs Standard products PS2533-1
PS2533L-1 (UL, CSA, BSI,
PS2533L-1-E3 Embossed Tape 1 000 pcs/reel NEMKO, SEMKO,
PS2533L-1-E4 DEMKO,
FIMKO
PS2533L-1-F3 Embossed Tape 2 000 pcs/reel approved)
PS2533L-1-F4
PS2533-2 8-pin DIP Magazine case 45 pcs PS2533-2
PS2533L-2
PS2533L-2-E3 Embossed Tape 1 000 pcs/reel
PS2533L-2-E4
PS2533-4 16-pin DIP Magazine case 20 pcs PS2533-4
PS2533L-4
PS2533-1-V 4-pin DIP Magazine case 100 pcs VDE0884 approved PS2533-1
PS2533L-1-V products
(Option)
PS2533L-1-V-E3 Embossed Tape 1 000 pcs/reel
PS2533L-1-V-E4
PS2533L-1-V-F3 Embossed Tape 2 000 pcs/reel
PS2533L-1-V-F4
PS2533L-2-V 8-pin DIP Magazine case 45 pcs PS2533-2
PS2533L-2-V
PS253L-2-V-E3 Embossed Tape 1 000 pcs/reel
PS2533L-2-V-E4
PS2533-4-V 16-pin DIP Magazine case 20 pcs PS2533-4
PS2533L-4-V
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10233EJ01V0DS5
ORDERING INFORMATION (Pb-Free)
Part Number Package Packing Style Safety Standard
Approval Application Part Number*1
PS2533-1-A 4-pin DIP Magazine case 100 pcs Standard products PS2533-1 PS2533L-1-A (UL, CSA, BSI,
PS2533L-1-E3-A Embossed Tape 1 000 pcs/reel NEMKO, SEMKO,
PS2533L-1-E4-A DEMKO,
FIMKO
PS2533L-1-F3-A Embossed Tape 2 000 pcs/reel approved)
PS2533L-1-F4-A
PS2533-2-A 8-pin DIP Magazine case 45 pcs PS2533-2 PS2533L-2-A
PS2533L-2-E3-A Embossed Tape 1 000 pcs/reel
PS2533L-2-E4-A
PS2533-4-A 16-pin DIP Magazine case 20 pcs PS2533-4 PS2533L-4-A
PS2533-1-V-A 4-pin DIP Magazine case 100 pcs VDE0884 approved PS2533-1 PS2533L-1-V-A products
(Option)
PS2533L-1-V-E3-A Embossed Tape 1 000 pcs/reel
PS2533L-1-V-E4-A
PS2533L-1-V-F3-A Embossed Tape 2 000 pcs/reel
PS2533L-1-V-F4-A
PS2533L-2-V-A 8-pin DIP Magazine case 45 pcs PS2533-2 PS2533L-2-V-A
PS253L-2-V-E3-A Embossed Tape 1 000 pcs/reel
PS2533L-2-V-E4-A
PS2533-4-V-A 16-pin DIP Magazine case 20 pcs PS2533-4 PS2533L-4-V-A
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10233EJ01V0DS
6
ABSOLUTE MAXIMUM RATINGS (T A = 25 °C, unless otherwise specified)
Ratings
Parameter Symbol
PS2533-1,PS2533L-1 PS2533-2, -4,PS2533L-2, -4
Unit
Diode Forward Current (DC) I F 80 mA Reverse Voltage V R 6 V
Power Dissipation Derating
?P D /°C 1.5 1.2 mW °C
Power Dissipation P D 150 120 mW/ch
Peak Forward Current
*1
I FP 1 A Transistor Collector to Emitter Voltage V CEO 350 V
Emitter to Collector Voltage
V ECO 0.6 V Collector Current I C 150 mA/ch
Power Dissipation Derating
?P C /°C 3.0 2.4 mW/°C
Power Dissipation P C 300 240 mW/ch Isolation Voltage
*2
BV 5 000 Vr.m.s. Operating Ambient Temperature T A ?55 to +100 °C Storage Temperature
T stg
?55 to +150
°C
*1 PW = 100 μs, Duty Cycle = 1 %
*2 AC voltage for 1 minute at T A = 25 °C, RH = 60 % between input and output
Data Sheet PN10233EJ01V0DS 7
ELECTRICAL CHARACTERISTICS (T A = 25 °C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage
V F
I F = 10 mA 1.15 1.40 V
Reverse Current I R V R = 5 V
5 μA
Terminal Capacitance C t V = 0 V, f = 1.0 MHz 30 pF Transistor Collector to Emitter Dark Current I CEO
V CE = 350 V, I F = 0 mA
400 nA Coupled Current Transfer Ratio (I C /I F )
CTR I F = 1 mA, V CE = 2 V 1 500 4 000 6 500 %
Collector Saturation Voltage
V CE(sat)
I F = 1 mA, I C = 2 mA
1.0 V Isolation Resistance R I-O V I-O = 1.0 kV DC 1011
? Isolation Capacitance C I-O V = 0 V, f = 1.0 MHz
0.6
pF
Rise Time *1
t r V CC = 5 V, I C = 10 mA, R L = 100 ?
100 μs Fall Time
*1
t f
100
*1 Test circuit for switching time
(PW = 1 ms,
Pulse input
V CC
V OUT
R L = 100 ?
50 ?
I F
Data Sheet PN10233EJ01V0DS
8
TYPICAL CHARACTERISTICS (T A = 25 °C, unless otherwise specified)
PS2533-1PS2533L-1
1.5 mW/?C
PS2533-2, -4PS2533L-2, -41.2 mW/?C
Ambient Temperature T A (?C)D i o d e P o w e r D i s s i p a t i o n P D (m W )
DIODE POWER DISSIPATION vs.AMBIENT TEMPERATURE
PS2533-1PS2533L-1
3.0 mW/?C
PS2533-2, -4PS2533L-2, -42.4 mW/?C
Ambient Temperature T A (?C)
T r a n s i s t o r P o w e r D i s s i p a t i o n P C (m W )
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
+25 ?C 0 ?C –25 ?C –55 ?C
T A = +100 ?C
+75 ?C +50 ?C
Forward Voltage V F (V)F o r w a r d C u r r e n t I F (m A )
FORWARD CURRENT vs.FORWARD VOLTAGE
I F = 0.5 mA
1.0 m A
1.5 m A
2.0 m
A 2.5
m A 3.0
m A
3.5 m A
4.0 m A
5.0
m A 4.5 mA Collector to Emitter Voltage V CE (V)
C o l l e c t o r C u r r e n t I C (m A )
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
V CE = 350 V
–50
–25
25
50
75
100
100 n 10 n 1 n 100 p
10μ1μAmbient Temperature T A (?C)C o l l e c t o r t o E m i t t e r D a r k C u r r e n t I C E O (A )
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
I F = 5.0 m A
2.0 m A
1.0 m A
0.5 m A
Collector Saturation Voltage V CE(sat) (V)
C o l l e c t o r C u r r e n t I C (m A )
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
Data Sheet PN10233EJ01V0DS 9
LONG TERM CTR DEGRADATION
Time (Hr)
C T R (R e l a t i v e V a l u e )
6
I F = 1 mA,T A = 25 ?C I F = 1 mA,T A = 60 ?C
FREQUENCY RESPONSE
Frequency f (kHz)
N o r m a l i z e d G a i n G v
R L = 1 k ?
100 ?
10 ?
V CE = 4 V, V in = 0.1 V p-p
R L
V in
V out 1 k ?47 ? 1 F μ;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
Normalized to 1.0 at T A = 25 ?C,
I F = 1 mA, V CE = 2 V
1.2
0.80.40.0
1.00.60.2–50
–25
25
50
75
100
Ambient Temperature T A (?C)N o r m a l i z e d C u r r e n t T r a n s f e r R a t i o C T R
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
V CE = 2 V
Sample A
B
Forward Current I F (mA)
C u r r e n t T r a n s f e r R a t i o C T R (%)
CURRENT TRANSFER RATIO vs.FORWARD CURRENT
V CC = 10 V, I C = 10 mA
t r
t d t s
t f
Load Resistance R L (?)
S w i t c h i n g T i m e t ( s )
μSWITCHING TIME vs.LOAD RESISTANCE
Remark The graphs indicate nominal characteristics.
Data Sheet PN10233EJ01V0DS
10
TAPING SPECIFICATIONS (Unit : mm)
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
PS2533L-1-E3
PS2533L-1-E4
1.55±0.1
2.0±0.14.0±0.1
1.75±0.1
4.5 MAX.
4.0±0.10.4
5.3±0.1
8.0±0.1
7.5±0.1
16.0±0.3
10.3±0.1
1.5+0.1–0
φPacking: 1 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ21.0±0.8
φ254±2.0
80.0±1.0
2.0±0.5
φφ15.9 to 19.4Outer edge of flange
21.5±1.0
17.5±1.0
Data Sheet PN10233EJ01V0DS 11
Tape Direction
PS2533L-1-F3
PS2533L-1-F4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.14.0±0.1
1.75±0.1
4.5 MAX.
4.0±0.10.4
5.3±0.1
8.0±0.1
7.5±0.1
16.0±0.3
10.3±0.1
1.5+0.1–0
Outline and Dimensions (Reel)
Packing: 2 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ21.0±0.8
φ330±2.0
100±1.0
2.0±0.5
φφ15.9 to 19.4Outer edge of flange
21.5±1.0
17.5±1.0
Data Sheet PN10233EJ01V0DS
12
Tape Direction
PS2533L-2-E3
PS2533L-2-E4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.14.0±0.1
1.75±0.1
4.5 MAX.
10.4±0.1
12.0±0.1
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
330±2.0
100±1.0
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
2.0±0.5
1.5+0.1–0
7.5±0.1
10.3±0.1
16.0±0.3
4.0±0.1
0.3
15.9 to 19.4Outer edge of flange
17.5±1.021.5±1.0
Data Sheet PN10233EJ01V0DS 13
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering ? Peak reflow temperature 260°C or below (package surface temperature) ? Time of peak reflow temperature 10 seconds or less ? Time of temperature higher than 220°C 60 seconds or less ? Time to preheat temperature from 120 to 180°C 120±30 s
? Number of reflows Three
? Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s (preheating)
220?C
180?C
P a c k a g e S u r f a c e T e m p e r a t u r e T (?C )
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)to 10 s
to 60 s
260?C MAX.120?C
(2) Wave soldering ? Temperature 260°C or below (molten solder temperature) ? Time
10 seconds or less
? Preheating conditions 120°C or below (package surface temperature)
? Number of times One (Allowed to be dipped in solder including plastic mold portion.)
? Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
(3) Cautions ? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
Data Sheet PN10233EJ01V0DS
14
USAGE CAUTIONS
1.Protect against static electricity when handling.
2.Avoid storage at a high temperature and high humidity.
Data Sheet PN10233EJ01V0DS15
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)
Parameter Symbol
Speck
Unit Application classification (DIN VDE 0109)
for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. IV III
Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test) U pr = 1.2 × U IORM, P d< 5 pC U IORM
U pr
890
1 068
V peak
V peak
Test voltage (partial discharge test, procedure b for all devices test) U pr = 1.6 × U IORM, P d< 5 pC U pr 1
424 V peak
Highest permissible overvoltage U TR 6
000 V peak Degree of pollution (DIN VDE 0109) 2
Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI 175
Material group (DIN VDE 0109) III a
Storage temperature range T stg?55 to +150 °C Operating temperature range T A–55 to +100 °C Isolation resistance, minimum value
V IO = 500 V dc at T A = 25 °C
V IO = 500 V dc at T A MAX. at least 100 °C Ris MIN.
Ris MIN.
1012
1011
?
?
Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve)
Package temperature
Current (input current I F, Psi = 0)
Power (output or total power dissipation) Isolation resistance
V IO = 500 V dc at T A = 175 °C (Tsi)
Tsi
Isi
Psi
Ris MIN.
175
400
700
109
°C
mA
mW
?Data Sheet PN10233EJ01V0DS
16
APPLICATION FOR TELEPHONE (EXAMPLE)
LINE
Bell Ringing Signal (75 Vr.m.s., 16 Hz)
PS2505/PS2506PS2705/PS2707PS2805etc.
Bell Ringing Detect
V CC
V CC
Line Observe
Dial Pulse PS2532/PS2533Generator PS2732/PS2733 PS2832/PS2833
PS2521PS2525
Dialer Circuit
IN
OUT
CPU
OCMOS FET PS7xxx
Speech Circuit
Data Sheet PN10233EJ01V0DS 17
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM
Not Detected (*) Mercury < 1000 PPM Not Detected
Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected
PBB < 1000 PPM Not Detected
PBDE < 1000 PPM Not Detected
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.