AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Gypsum based machine plaster GYP 1 Global Applications
Gypsum based machine plaster to be applied in thickness from 5 to 15 mm. For interior use only! Formulation Parts
Calcinated Gypsum (beta-hemihydrate, anhydrite) 40 – 60 Hydrated Lime 1 – 5 Calcium Carbonate Flour 0 – 0.2 mm 10 – 20 Calcium Carbonate Sand 0.2 – 1.0 mm 20 – 40 Perlite 0 – 1.0 mm 0 – 2 Gypsum Retarder 0.02 – 0.10 BERMODOL Air-Entraining Agent 0.01 – 0.03 BERMOCOLL Cellulose Ether (medium to high viscous) 0.1 – 0.3 ELOTEX Hydrophobic Additive 0 – 0.5 ELOTEX Thickener 0.02 – 0.05 ELOTEX Redispersible Powder 0 – 1 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Hydrophobic
Additive
Air-Entraining
Agent
Cellulose Ether
AD0110ELOSET542 SEAL712 *AEA 2800 CCA 312
MP2100 ELOSET543CCA 612
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Gypsum-based hand plaster GYP 2 Global Applications
Gypsum-based hand applied plaster for surface coverage.
Layer-thickness is 10 to 20 mm. For interior use only!
Formulation Parts
Calcinated Gypsum (beta-hemihydrate, anhydrite) 80 – 90 Hydrated Lime 0.1 – 1.0 Calcium Carbonate Flour <100 μm 10 – 20 Perlite 0 – 1.0 mm 1 – 2 Gypsum Retarder 0.03 – 0.08 BERMODOL Air-Entraining Agent 0.01 – 0.02 BERMOCOLL Cellulose Ether (high viscous) 0.12 – 0.2 ELOTEX Thickener 0.02 – 0.05 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Thickener Air-Entraining Agent Cellulose Ether
ELOSET542 AEA 2800 CCM 879
ELOSET543 CCA 379
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Gypsum-lime based machine plaster GYP 3 Global Applications
Gypsum-lime basecoat plaster, hand or machine applied in a thickness from
5 to 15 mm. For interior use only!
Formulation Parts
Calcinated Gypsum (beta-hemihydrate, anhydrite) 30 – 50 Hydrated Lime 5 – 10 Calcium Carbonate Flour 0 – 0.2 mm 10 – 20 Calcium Carbonate Sand 0.2 – 1.0 mm 30 – 50 Perlite 0 – 1.0 mm 0 – 2 Gypsum Retarder 0.02 – 0.10 BERMODOL Air-Entraining Agent 0.01 – 0.03 BERMOCOLL Cellulose Ether (medium to high viscous) 0.1 – 0.3 ELOTEX Hydrophobic Additive 0 – 0.5 ELOTEX Thickener 0.02 – 0.05 ELOTEX Redispersible Powder 0 – 1 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Hydrophobic Additive Air-Entraining
Agent
Cellulose
Ether
AD0110ELOSET542 SEAL712 *AEA 2800 CCA 312 MP2100 ELOSET543CCA 612
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Gypsum based adhesive for plasterboards GYP 4 Global Applications
Gypsum based adhesive to be used as mounting binder for gypsum plasterboards.
For interior use only!
Formulation Parts
Beta-Gypsum Hemihydrate 50 – 80 Calcium Carbonate Sand 0 - 1.0 μm 20 – 50 Gypsum Retarder 0.05 – 0.15 BERMOCOLL Cellulose Ether (high viscous) 0.1 – 0.3 ELOTEX Thickener 0.01 – 0.05 ELOTEX Redispersible Powder 2 – 3 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Cellulose Ether
AD0110ELOSET542 CCM 890
MP2100 ELOSET543CCA 328
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Joint Compound for plasterboards, gypsum-based GYP 5 Global Applications
Joint compound and crack filler for gypsum plasterboards or other gypsum substrates.
For interior use only!
Formulation Parts
Beta-Gypsum Hemihydrate 50 – 90 Hydrated Lime 1 – 3 Calcium Carbonate Flour 20 – 80 μm 10 – 50 China Clay 5 – 50 μm 0 – 10 Mica Filler 10 – 100 μm 0 – 10 Gypsum Retarder 0.02 – 0.10 BERMOCOLL Cellulose Ether (low to medium viscous) 0.4 – 0.6 ELOTEX Hydrophobic Additive 0.05 – 0.1 ELOTEX Thickener 0.01 – 0.05 ELOTEX Redispersible Powder 2 – 3 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Hydrophobic Additive Cellulose Ether D0110ELOSET542 SEAL712 *CCA 470
MP2100 ELOSET543 CCA 328
* For humid areas only!
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Joint Compound for plasterboards, polymer-based GYP 6 Global Applications
Gypsum-free joint compound and crack filler for gypsum plasterboards.
For interior use only!
Formulation Parts
Calcium Carbonate Flour <100 μm 60 – 70 Mica Filler 10 – 100 μm 15 – 25 China Clay 5 – 50 μm 5 – 15 Hydrated Lime 1 – 5 BERMOCOLL Cellulose Ether (medium to high viscous) 0.3 – 0.5 ELOTEX Thickener 0.01 – 0.05 ELOTEX Redispersible Powder 2 – 4 Water approx. 45%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Cellulose Ether
AD0110ELOSET542 M 70
MP2100 ELOSET543CCA 470
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
AkzoNobel Functional Chemicals
Cellulosic Specialties, SE–444 85 Stenungsund
T+46 303 85000 F+46 303 83921
csglobalmarketing@https://www.doczj.com/doc/d53820520.html,, https://www.doczj.com/doc/d53820520.html,/cs
Finish plaster and smoothing comp., gypsum based GYP 7 Global Applications
Trowel applied gypsum-based smoothing compound. Average thickness is from 1 to 2 mm. Different quality standards for finishing. For interior use only!
Formulation Parts
Beta-Gypsum Hemihydrate <100 μm 70 – 80 Hydrated Lime 1 – 5 Calcium Carbonate Flour <100 μm 20 – 30 Gypsum Retarder 0.1 – 0.2 Cellulose Fibers < 200 μm 0.2 – 0.5 BERMOCOLL Cellulose Ether (high viscous) 0.4 – 0.6 ELOTEX Thickener 0.01 – 0.05 ELOTEX Redispersible Powder 1 – 2 Water approx. 50%
We recommend the following AkzoNobel products for this formulation:
Redispersible Powder Thickener Cellulose Ether
AD0110ELOSET542 CCA 698
MP2100 ELOSET543CCM 894
Own formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.