2/98 Catalogue number logic
BAYD - Sign code: A G
Mounting Explosion-proof emergency exit light fittings
G: pendant pole type
X: ceiling type
B: wall type
http:// https://www.doczj.com/doc/a215527543.html,
General Catalogue 01.01.2012
2/99 General Catalogue 01.01.2012
http:// https://www.doczj.com/doc/a215527543.html,
Selection table
Type/
Ordering code
BnY81-18 x 1X
BnY81-18 x 1G
BnY81-18 x 1D
BnY81-18 x 1B
BnY81-18 x 1L
BnY81-18 x 2X
BnY81-18 x 2G
BnY81-18 x 2D
Lamp power (W)18 x 118 x 118 x 118 x 118 x 118 x 218 x 218 x 2Weight (kg)2.702.502.803.302.602.702.802.90Type/Ordering code BnY81-36 x 1X BnY81-36 x 1G BnY81-36 x 1D BnY81-36 x 1B BnY81-36 x 1L BnY81-36 x 2X BnY81-36 x 2G BnY81-36 x 2D Catalogue number logic
BnY81- x
Mounting Lamp number
Lamp power (W)
Explosion-proof light fittings for fluorescent lamp
X: ceiling type
G: pendant pole type
D: pendant chain type
B: wall type
L: pole type LED: Only for LED lamp
J: Emergency lighting (optional)
3/28 Catalogue number logic
http:// https://www.doczj.com/doc/a215527543.html,
General Catalogue 01.01.2012Z: Socket
T: Plug
BCZ 85 - / / /
Pole number Rated voltage (V)Rated current (A)
Design No.
Explosion-proof plug and sockets
3P (2P+PE)
4P (3P+PE)
5P (3P+N+PE)
130: 100~130; 57/100~75/130
250: 200~250; 120/208~144/250
415: 380~415; 200/346~240/415
500: 480~500; 277/480~288/500
690: 600~690; 347/600~400/690
BCZ85-32//
BCZ85-63//
BCZ85-125//
3/29 General Catalogue 01.01.2012
http:// https://www.doczj.com/doc/a215527543.html,
3/30http:// https://www.doczj.com/doc/a215527543.html,
General Catalogue 01.01.2012
3/31 General Catalogue 01.01.2012
http:// https://www.doczj.com/doc/a215527543.html,
3/32http:// https://www.doczj.com/doc/a215527543.html,
General Catalogue 01.01.2012
3/33 General Catalogue 01.01.2012
http:// https://www.doczj.com/doc/a215527543.html,
FAM Series water-proof dust-proof corrosion-proof street lamps
Catalogue Number Logic
Lamp power
L: Metal halide lamp
N: High pressure sodium lamp
（A、B、C、D、E、F、G）
(01、02、03）
Ordering information
?Follow the product specification instructions for selection.
For example: FAM-Q1AN25Q means single sodium lamp 250W single-arm water-proof dust-proof corrosion-proof street lamp ;
? The lamp source shall not be supplied. Philips, Osram, Yaming Brand are recommended; European standard light source should be provided for 250W and 400W metal halide lamp;
?Please specify rated power when ordering for lamps with dual-lamp source;
? Light pole types include single-arm (A type), and equal-length arm (B type), unequal-length arm (C type), for options on site, and supplied upon request;
?Pole height specifications can also be customized, if no special requirements, 6-meter light pole shall be supplied;
Product feature
? Aluminum alloy die-casting enclosure, powder coated external surface;
? Bulb change through core-pulling, good sealing performance, keep
the rain, insects, dust from entering into the inside;
? spring locking device, easy to open;
?Air-purifying respirator inside reflector to ensure high output
of luminous flux and reduce reflection coefficient attenuation;
?Lamps with slip bolt, lamp post lining plate is pressed, easy to install;
?The pole is made of high quality steel plate, electrostatic spray on the
surface after hot-dip zinc processing inside and outside , can be widely
used in various chemical plant for road lighting;
?Lamps of street light series, light poles wind resistance capacity up to 40m / s,
and can be widely used in areas along the coast where wind speed is higher.
Main technical parameters
rated
voltage
high pressure sodium lamp(N) metal halide lamp(L) ingress protection corrosion-proof lamp holder cable O.D. AC220V
50Hz 150W,250W,400W 250W,400W IP65 WF1*WF2 E40 Φ10mm ?φ14mm Outline and mounting type
Pole types
TypeA type B type C type D type E type F type G lamp pole foundation drawing
foundation Ⅱ
flange ⅠfoundationⅠLuminous Intensity Distribution Note: Foundation I is for street lamp with pole below 10m, foundation II is for street lamp with pole of 10m or above.
FAT-L Series water-proof dust-proof corrosion-proof floodlights (A type)
Catalogue Number Logic
Type
Lamp power
corrosion-proof floodlights
Ordering Information
? Follow the product specification instructions for selection.
For example: 25W square LED floodlight, the product type shall be FAT-L-L250A;
?The lamp source shall not be supplied for 400w lamp. Philips, Osram, Yaming Brand are recommended; ? European standard light source should be provided for 250W and 400W metal halide lamp;
? Lamp source and ballast already provided for 1000w lamp.
Product feature
? Aluminum alloy die-casting enclosure, powder coated external surface;
? anti-acid, anti-alkali, water-proof, dust-proof, and corrosion-proof,
protection degree: IP65
? Orange-peel reflector with soft light;
? 400w lamp and ballast are built together,
but 1000w lamp is separated from ballast.
? High power factor, cos φ≥0.90;
?stainless steel exposed fastener, silicone rubber seals, anti-oil,
anti-acid, anti-alkali, and high temperature resistance;
?Cable wiring
Main technical parameters
rated
voltage
high pressure
sodium lamp(N)metal
halide lamp(L) ingress protection corrosion -proof lamp holder cable gland weight (kg) enclosure type AC220V
50Hz 150W, 250W, 400W
250W,400W IP65 WF1 *WF2 E40 Φ6.5mm ?φ10mm 8 Ⅰ 30 Ⅱ
1000W 1000W
Outline and mounting type
luminous intensity distribution