Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
CDC-TESTS-CELIO INTERNATIONAL
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
INTRODUCTION
This document of instructions defines all requirements applicable by category of products to ensure level of quality on goods ordered by CELIO INTERNATIONAL.
Each CDC-TESTS-XXX sheet is applicable according validated rules by CELIO INTERNATIONAL Quality Control Procedure: PROC-QUAL-CI-006 and by CELIO INTERNATIONAL Test Laboratory Management Procedure: PROC-QUAL-CI-007.
SUMMARY
1. CDC-TESTS-001- KNITTED ................................................................................................. 3
2. CDC-TESTS-002- PANTS - BOXER - SHORT ..................................................................... 5
3. CDC-TESTS-003- PULLOVER ............................................................................................. 7
4. CDC-TESTS-004- COATED OUTWEAR .............................................................................. 9
5. CDC-TESTS-005- NON COATED OUTWEAR ................................................................... 11
6. CDC-TESTS-006- LEATHER GARMENT ........................................................................... 13
7. CDC-TESTS-007- SUIT AND PANTS - CITY ...................................................................... 15
8. CDC-TESTS-008- SHIRT .................................................................................................... 17
9. CDC-TESTS-009- UMBRELLA ........................................................................................... 19 10. CDC-TESTS-010- SWIMWEAR .......................................................................................... 20 11. CDC-TESTS-011- BELT ...................................................................................................... 22 12. CDC-TESTS-012- SCARF ................................................................................................... 23 13. CDC-TESTS-013- SOCKS .................................................................................................. 24 14. CDC-TESTS-014- CAP ....................................................................................................... 25 15. CDC-TESTS-015- BATH TOWEL ....................................................................................... 26 16. CDC-TESTS-016- TIE ......................................................................................................... 27 17. CDC-TESTS-017- TONG - FLIP FLOP ............................................................................... 28 18. CDC-TESTS-018- BAG ....................................................................................................... 29 19. CDC-TESTS-019- JEANS - DENIM .................................................................................... 30 20.
CDC-TESTS-020- SHOES (32)
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
1. CDC-TESTS-001- KNITTED
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content ISO 1833
< +/- 3
CDC-Tests-001
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Light
Change 4 Staining 4/5 Medium Change 4 Staining Dark & Pigment Change 4 Staining
3/4 Colour fastness rubbing
to dry
NF EN ISO 105 X12
Light & Medium
Staining
4/5
Dark & pigment
4 Colour fastness rubbing
to wet
NF EN ISO 105 X12
Light & Medium
Staining 3/4
Dark & pigment
3 Colour fastness to perspiration
NF EN ISO E04
Light & Medium Change 4 Staining
Dark & Pigment Change 4 Staining 3/4 Colour fastness to water NF EN ISO E01
Light & Medium
Change 4 Staining Dark & Pigment Change 4 Staining 3/4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4
Change 3/4 Weight (Mass) g/m2
NF EN ISO 3801 Method 5
≤+/- 5%
Shrinkage (Dimensional
stability) NF EN ISO 5077 / 6330 / 3759 2x5A ; 40°C+ drying according care label
Height ≤+/- 5%
Width
Spirality after cleaning ISO 16322-1 NF EN ISO 6330 2x5A ; 40°C
≤5%
Garment appearance after
cleaning
NF EN ISO 6330
2x5A ; 40°C + drying according
care label
Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling box resistance after 2
washings NF EN ISO 12945-1 /
ISO 6330
4h 14 400 cycles 2x5A ; 40°C + drying according
care label -For underwear, quotation of outside and inside face
Polar fleece
3
Others 4
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Slider puller resistance
BS 3084 annex B
Accessories
Chain width <5 mm >100 N Chain width ≤7 mm >150 N
Chain width >7 mm >250 N Endurance test
BS 3084 annex F
after 200 cycles
Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons and snaps attachment
resistance
EN 71-1 (5.1) Accessories
>100 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
2. CDC-TESTS-002- PANTS - BOXER - SHORT
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content
ISO 1833
< +/- 3
CDC-Tests-002
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Main Fabric
Light
Change 4 Staining 4-5 Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to dry cleaning
NF EN ISO 105
D01
Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment
Change 4 Staining Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric +
Lining Light & Medium Staining 4 Dark & Pigment Colour fastness rubbing
to wet
NF EN ISO 105 X12
Main Fabric +
Lining Light & Medium Staining 3-4 Dark & Pigment 3 Colour fastness to perspiration
NF EN ISO E04
Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment Change 4 Staining 3-4 Colour fastness to water NF EN ISO E01 Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4 Main Fabric
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801 Method 5
≤ +/- 5%
Shrinkage (Dimensional stability) Washing + drying according care label NF EN ISO 5077/ 6330 / 3759 2x5A ; 40°C+ drying according care label
Height ≤ +/- 3% Width Shrinkage (Dimensional stability) Dry cleaning ISO 3175 / ISO 3759 Height ≤ +/- 2%
Width
≤ +/- 2% Angular variation after cleaning ISO 16322-2
Plain fabric
≤4%
Pattern fabric or very visible
weft
≤2%
Garment appearance after
cleaning NF EN ISO 6330
2x5A ; 40°C + drying according
care label Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling Martindale resistance
after 2 washings
NF EN ISO 12945-2
/ ISO 6330
8 000 cycles 2x5A ; 40°C + drying according
care label
4 Tearing strength ISO 13937 - 1
Main Fabric Mass <6oz (170 g/m2) ≥1.3 daN Mass >6 oz (170 g/m2)
≥1.7 daN Lining
≥1.1 daN
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Abrasion resistance NF EN ISO 12947-2-3-4
9kPa 10 000 cycles 2 threads broken,
≤3% loss in mass and pilling 4/5
Slippage seam performance
ISO 13936 - 2
At 8daN Main Fabric <3 mm At 5daN
Lining
<3 mm Slider puller resistance BS 3084 annex B
Accessories
Chain width
<5 mm
>100 N Chain width
≤7 mm
>150 N Chain
width >7 mm >250 N Endurance test BS 3084 annex F after 200 cycles
Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm
>500 N Buttons and snaps attachment
resistance
EN 71-1 (5.1)
Accessories
> 200 N
Pull up resistance test
NF ISO 12947-2/-3
9 kPa
Inside face: pre-treatment 1000 cycles
of ageing
Main Fabric
Shorn velvet
2 Threads broken <10% loss in mass
Pilling 4/5
Corduroy velvet 2 Threads broken
<3% loss in mass
Pilling 4/5
Bursting test ISO 13938-2
Surface 50 cm2 All ageing parts of garment must be tested with an individual result by
specimen.
Main Fabric
Mass ≤ 6oz (170 g/m2)
≥ 300
Kpa
6 oz (170g/m2)< Mass > 9 oz (255 g/m2) ≥ 350
Kpa
Mass ≥ 9 oz (255 g/m2)
≥ 400
Kpa
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
3. CDC-TESTS-003- PULLOVER
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content
ISO 1833
< +/- 3
CDC-Tests-003
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Light
Change 4 Staining 4/5 Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3/4 Colour fastness rubbing
to dry NF EN ISO 105 X12
Light & Medium Staining
4/5 Dark & pigment
4 Colour fastness rubbing
to wet
NF EN ISO 105 X12
Light & Medium Staining 3 Dark & pigment 2/3 Colour fastness to perspiration
NF EN ISO E04
Light & Medium
Change 4 Staining
Dark & Pigment Change 4 Staining 3/4 Colour fastness to water NF EN ISO E01
Light & Medium
Change 4 Staining Dark & Pigment Change 4 Staining 3/4 Colour fastness to artificial light NF EN ISO 105 B02
Blue Scale 4
Change 3/4 Weight of garment in size L
≤ +/- 5%
Shrinkage (Dimensional stability) Washing machine + drying according care label NF EN ISO 5077/ 6330 / 3759 Washing machine compulsory 2x7A ; 40°C temperature + drying according care label
Column ≤ +/- 5% Row
Spirality after cleaning ISO 16322-1 NF EN ISO 6330 2x7A ; 40°C
≤5%
Garment appearance after
cleaning NF EN ISO 6330
2x7A ; 40°C + drying according
care label Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling box resistance after 2
washings
NF EN ISO 12945-1 /
ISO 6330
3h 10800 cycles 2x7A ; 40°C + drying according
care label
Without Cachemire 3/4
With Cachemire 3 Slider puller resistance BS 3084 annex B Accessories
Chain width <5 mm >100 N Chain width ≤7 mm >150 N
Chain width >7 mm
>250 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Endurance test
BS 3084 annex F
after 200 cycles
Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons and snaps attachment
resistance
EN 71-1 (5.1) Accessories
>100 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
4. CDC-TESTS-004- COATED OUTWEAR
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements
Fibre content
ISO 1833
Main Fabric + Linings ( body and sleeves)
< +/- 3
CDC-Tests-004 Standard Method Requirements Colour fastness to washing NF EN ISO 105 C06 A2S ; 40°C
Main Fabric +
Linings All colors Change 4 Staining 3/4 Colour fastness to dry cleaning
NF EN ISO 105
D01 Main Fabric + Linings All colors Change 4 Staining 3/4 Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric + Linings All colors Staining 4 Colour fastness rubbing
to wet
NF EN ISO 105 X12
Main Fabric + Linings All colors Staining 3/4 Colour fastness to perspiration
NF EN ISO E04
Linings
Light & Medium Change 4 Staining Linings
Dark & Pigment Change 4 Staining 3/4 Colour fastness to water NF EN ISO E01 Main Fabric + Linings
All colors Change 4 Staining 3/4 Colour fastness to artificial light
NF EN ISO 105 B02
Blue Scale 4
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801 Method 5 Main Fabric + Linings
≤ +/- 5% Shrinkage (Dimensional stability) Washing + drying according care label NF EN ISO 5077 / 6330 / 3759 2x5A ; 40°C+ drying according care label
Warp ≤ - 3% Weft Shrinkage (Dimensional stability) Dry cleaning ISO 3175-1 / -2 NF EN ISO 3759
Warp ≤ - 3% Weft ≤ - 3% Angular variation after cleaning
ISO 16322-2
Plain fabric
≤4% Pattern fabric or very visible
weft ≤2%
Garment ( including Laminating
coating) appearance
NF EN ISO 6330
4x5A ; 40°C + drying according
care label
Quotation after each cycle, before and after drying : visible defects on coating (bubbles, cracks,…) / 1 cycle is 2x8A / Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect… Tearing strength ISO 13937 - 1 Main Fabric ≥2.0 daN Linings ≥1.2 daN
Abrasion resistance
NF EN ISO 12947-2-3-4
9kPa 20000 cycles
Main Fabric
2 threads broken , ≤3% loss in mass and
pilling 4/5
9kPa 10000 cycles linings Slippage seam performance
ISO 13936 - 2
At 8daN Main Fabric
<3 mm
At 5daN
Linings
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Slider puller resistance
BS 3084 annex B
Accessories
Chain width <5 mm >100 N Chain width ≤7 mm >150 N
Chain width >7 mm >250 N Endurance Test
BS 3084 annex F
after 500 cycles
Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons and snaps attachment
resistance EN 71-1 (5.1)
Accessories
>200 N Resistance to water penetration - Waterproof
ISO 811
Before washing Main Fabric + Fabric Seams
seals
≥2500 mm water
After washing ISO 6330 5x5A Reperlant - Spray Test NF EN ISO 4920
Before washing
Main Fabric
quotation 4 and Absorption <20% After washing ISO 6330 5x5A
quotation 3 and Absorption <40%
Hard-wearing of coating Blocking Resistance
NF EN 25978
Main Fabric
No adhesion between specimens + no
degradation
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
5. CDC-TESTS-005- NON COATED OUTWEAR
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements
Fibre content ISO 1833 Main Fabric + Linings ( body and sleeves)
< +/- 3
CDC-Tests-005
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Main Fabric
All colors
Change 4 Staining 3/4 Linings
All colors Change 4 Staining 3/4 Colour fastness to dry cleaning
NF EN ISO 105
D01
Main Fabric
All colors Change 4 Staining 3/4 Linings
All colors Change 4 Staining 3/4 Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric All colors Staining 4 Linings Colour fastness rubbing
to wet
NF EN ISO 105 X12
Main Fabric All colors Staining 3/4 Linings Colour fastness to perspiration
NF EN ISO E04
Linings
Light & Medium Change 4 Staining Linings Dark & Pigment Change 4 Staining 3/4 Colour fastness to water
NF EN ISO E01
Main Fabric
All colors Change 4 Staining 3/4 Linings
All colors Change 4 Staining
3/4 Colour fastness to artificial light
NF EN ISO 105 B02
Blue Scale 4
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801 Method 5 Main Fabric + Linings
≤ +/- 5% Shrinkage (Dimensional stability) Washing + drying according care label NF EN ISO 5077/ 6330 / 3759 2x5A ; 40°C+ drying according care label
Warp ≤+/-3% Weft Shrinkage (Dimensional stability) Dry cleaning
ISO 3175-1 / -2 ISO 3759
Warp ≤ +/- 3% Weft ≤ +/- 3% Angular variation after cleaning
ISO 16322-2
Plain fabric ≤4%
Pattern fabric or very visible weft
≤2% Garment appearance NF EN ISO 6330 2x5A ; 40°C + drying according
care label
Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect… Tearing strength
ISO 13937-1
Main Fabric ≥2.0 daN Linings
≥1.2 daN
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Pilling Martindale resistance
after 2 washings
NF EN ISO 12945-2 /
ISO 6330
8 000 cycles 2x5A ; 40°C + drying according
care label Main fabric
3-4
Abrasion resistance
NF EN ISO 12947-2-3-4
9kPa 20000 cycles
Main Fabric 2 threads broken, ≤3% loss in mass and
pilling 4/5
9kPa 10000 cycles Linings Slippage seam performance
ISO 13936-2
At 8daN Main Fabric <3 mm At 5daN
Linings
<3 mm Slider puller resistance
BS 3084 annex B
Accessories
Chain width <5 mm >100 N
Chain width ≤7 mm >150 N
Chain width >7 mm
>250 N Endurance test BS 3084 annex F after 500 cycles Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles
BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons and snaps attachment
resistance
EN 71-1 (5.1) Accessories
> 200 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
6. CDC-TESTS-006- LEATHER GARMENT
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test
Standard
Method
Requirements
Fibre content
Material identification
Leather
Legal term according regulation 18/02/1986 and
10/05/1989
ISO 1833
Linings ( body and sleeves)
< +/- 3
CDC-Tests-006 Standard Method
Requirements Colour fastness rubbing
to dry
NF EN ISO 105 X12 Linings Light & Medium Staining 4 Dark & Pigment Colour fastness rubbing
to wet NF EN ISO 105 X12
Linings Light & Medium Staining 3/4 Dark & Pigment
Colour fastness to perspiration
NF EN ISO E04
Linings
Light & Medium Change 4 Staining Linings
Dark & Pigment
Change 4 Staining 3/4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4
Change
3/4 Tearing strength ISO 13937 - 1 Linings
≥1,2 daN Slippage seam performance
ISO 13936 - 2
5 daN
Linings
< 3mm Slider puller resistance
BS 3084 annex B
Accessories
Chain width <5 mm >100 N
Chain width ≤7 mm >150 N
Chain width >7 mm
>250 N Endurance test BS 3084 annex F after 500 cycles Accessories
No damage Chain crosswise strength test after endurance test of 200
cycles
BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width <5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons and snaps attachment
resistance
EN 71-1 (5.1) Accessories
> 200 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Colour fastness rubbing
to dry
ISO 11640 with 20 cycles Main Material Staining 4 Colour fastness rubbing
to wet
ISO 11640 with 50 cycles
Main Material
Staining
3/4 Tearing strength NF EN ISO 3377
Leather
> 3 daN/mm
Split Leather
> 1.5 daN/mm
Abrasion resistance
ISO 12947-2
12 kPa and to dry with
25600 cycles
Leather + Split
Leather
No degradation 12 kPa and to wet with 12800 cycles Flex resistance ISO 5402
To dry and after 20000 cycles
Leather + Split
Leather
No degradation To wet and after 20000 cycles Measurement of thickness
NF EN ISO 2589
Under pressure of
0.1 kPa
Leather + Split
Leather
> 1.5 mm
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
7. CDC-TESTS-007- SUIT AND PANTS - CITY
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements
Fibre content
ISO 1833
Main Fabric + Linings (body and sleeves)
< +/- 3
CDC-Tests-007
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Main Fabric &
Linings
Light
Change 4 Staining 4-5 Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to dry cleaning
NF EN ISO 105
D 01 Main Fabric & Linings All colors Change 4 Staining Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric Light & Medium Staining 4 Linings Dark & Pigment Colour fastness rubbing
to wet NF EN ISO 105 X12
Main Fabric Light & Medium Staining 3-4 Linings Dark & Pigment 3 Colour fastness to perspiration
NF EN ISO E04
Linings
Light & Medium
Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4 Main Fabric
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801
Method 5 ≤ +/- 5%
Shrinkage (Dimensional stability) Washing + drying according care label NF EN ISO 5077/ 6330 / 3759 Cotton-blended 2x5A ; 40°C+ drying according care label Height ≤ +/- 3%
Width Wool-blended 2x6A ; 30°C+ drying according care label
Height Width Shrinkage (Dimensional stability) Dry cleaning
ISO 3175-1 / -2 ISO 3759
Height ≤ +/-2% Width ≤ +/- 2% Angular variation after care
ISO 16322-2
Plain fabric ≤4% Pattern fabric or very visible weft
≤2%
Garment appearance after
care
After Washing + drying according care label or after dry
cleaning
Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling Martindale resistance
after 2 washings
NF EN ISO 12945-2 /
ISO 6330
5 000 cycles 2x5A ; 40°C + drying according
care label
Main fabric 3-4
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Tearing strength
ISO 13937 - 1
Main fabric
≥1,7 daN Linings
≥1,2
daN
Abrasion resistance NF EN ISO 12947-2-3-4 9kPa 10 000 cycles
Main fabric + Linings
2 threads broken ,≤3% loss in mass and
pilling 4/5
Pull up resistance test
NF ISO 12947-2/-3
9 kPa
Inside face: 1000 cycles of ageing
Shorn velvet 2 Threads broken <10% loss in mass
Pilling 4/5
Corduroy velvet 2 Threads broken <3% loss in mass
Pilling 4/5 Slippage seam performance ISO 13936 - 2
At 8 daN Main Fabric < 3mm At 5 daN
Linings
< 3mm
Slider puller resistance BS 3084 annex B Accessories
Chain width
<5 mm
>100 N
Chain width
≤7 mm
>150 N
Chain
width >7 mm >250 N
Endurance test BS 3084 annex F after 200 cycles Accessories
No
damage
Chain crosswise strength test after endurance test of 200
cycles BS 3084 annex G
Clamp width 25 mm Speed 300 mm/min
Accessories
Chain width
<5 mm >250 N Chain width ≤7 mm >350 N Chain width >7 mm >500 N Buttons / Snaps / Hook attachment resistance
EN 71-1 (5.1)
Accessories
>200 N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
8. CDC-TESTS-008- SHIRT
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content
ISO 1833
< +/- 3
CDC-Tests-008
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Main Fabric
Light
Change 4 Staining 4-5 Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric Light & Medium Staining 4 Dark & Pigment Colour fastness rubbing
to wet NF EN ISO 105 X12
Main Fabric
Light & Medium Staining 3-4 Dark & Pigment 3 Colour fastness to perspiration
NF EN ISO E04
Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment Change 4 Staining 3-4 Colour fastness to water NF EN ISO E01 Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4 Main Fabric
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801 Method 5 ≤+/- 5%
Shrinkage (Dimensional stability) Washing + drying according care label
NF EN ISO 5077/ 6330 / 3759
2x5A ; 40°C+ drying according care label
Height < +/- 3% Width Angular variation after cleaning ISO 16322-2
Plain fabric
≤4%
Pattern fabric or very visible weft
≤2% Garment appearance after
cleaning NF EN ISO 6330
2x5A ; 40°C + drying according
care label Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling Martindale resistance
after 2 washings
NF EN ISO 12945-2 /
ISO 6330
5000 cycles 2x5A ; 40°C + drying according
care label
Main Fabric 4
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
Tearing strength ISO 13937 - 1 Main Fabric
Heavy weight fabric ≥1.5 daN Medium
weight fabric ≥1.2 daN
Light weight fabric
≥1.0 daN Abrasion resistance NF EN ISO 12947-2-3-4
9kPa 10000 cycles Main Fabric 2 threads broken,≤3% loss in mass and
pilling 4/5 Slippage seam performance ISO 13936 - 2
At 5daN
Main Fabric <3 mm Buttons and snaps attachment
resistance EN 71-1 (5.1) Accessories
>100 N Oil resistance if applicable ISO 14119 Main Fabric Initial before washing Grade 6 After 5 washings
Grade 5 Stain resistance if applicable AATCC 130 Main Fabric Initial before Washing and
after 5 washings Minimum class 4 Wrinckle recovery of fabric if
applicable
ISO 9867
Main Fabric
After 2 Washings 4 After 5 washings
3-4
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
9. CDC-TESTS-009- UMBRELLA
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content
ISO 1833
< +/- 3
CDC-Tests-009
Standard
Method
Requirements
Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric Light & Medium Staining
4 Dark & Pigment 3-4 Colour fastness rubbing
to wet NF EN ISO 105 X12 Main Fabric Light & Medium Staining
3-4
Dark & Pigment 3
Colour fastness to water NF EN ISO E01 Main Fabric All colors
Change 4 Staining 3-4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4
Main Fabric Change 3/4
Tearing strength
ISO 13937 - 1 Main Fabric
≥1.7 daN Seam strength resistance
ISO 13935 - 2
≥10 daN Tensile strength ISO 13934 - 1 100 mm/min Main Fabric
≥14 daN Durability test ( open and
close)
Method by manual
operation
500 cycles No damage Water repellency
BS 5066 Wira shower
Main Fabric Absorption: max 40% Penetration: max 100
ml
Corrosion resistance (for metal
parts)
ISO 22775 method 2
Accessories No corrosion
Breaking resistance of attachments parts
EN 71-1 (5.1)
Accessories
>90N
Document issued by
TRADEMARK
Quality Department CIAR
South Center Titanium - place Broodthaers plein 8/2
1060 Bruxelles- Belgique
10. CDC-TESTS-010- SWIMWEAR
Each Celio reference must be conformed to CDC-ECO TOXICO-CELIO INTERNATIONAL and
REACH regulation.
Compulsory Test Standard Method
Requirements Fibre content
ISO 1833
< +/- 3
CDC-Tests-010
Standard
Method
Requirements Colour fastness to washing
NF EN ISO 105 C06
A2S ; 40°C
Main Fabric
Light
Change 4 Staining 4-5 Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness rubbing
to dry
NF EN ISO 105 X12 Main Fabric Light & Medium Staining 4 Dark & Pigment Colour fastness rubbing
to wet NF EN ISO 105 X12
Main Fabric
Light & Medium Staining 3-4 Dark & Pigment Colour fastness to perspiration
NF EN ISO E04
Main Fabric
Light & Medium
Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to water
NF EN ISO E01
Main Fabric
Light
Change 4 Staining Medium Change 4 Staining Dark & Pigment
Change 4 Staining 3-4 Colour fastness to sea water NF EN ISO 105 E02
Main Fabric Change 4 Staining Colour fastness to swimming
pool water
NF EN ISO 105 E03 50 mg/l of chlorine Main Fabric Change
4 Colour fastness to artificial light
NF EN ISO 105 B02 Blue Scale 4 Main Fabric
Change
3/4 Weight (Mass) g/m2 NF EN ISO 3801 Method 5
≤+/- 5% Shrinkage (Dimensional stability) Washing + drying according care label NF EN ISO 5077/ 6330 / 3759
2x5A ; 40°C+ drying according care label
For Woven
Height and Width
≤+/- 3%
For Knits
≤+/- 5%
Angular variation after cleaning
for woven fabric ISO 16322-2
Plain fabric
≤4% Pattern fabric or very visible
weft
≤2% Spirality after cleaning for knit
fabric ISO 16322-1 NF EN ISO 6330 2x5A ; 40°C
≤5%
Garment appearance after
cleaning NF EN ISO 6330
2x5A ; 40°C + drying according
care label Change and staining of all over print, prints, embroideries, puckering, slant stripes, seams aspect, collar aspect…
Pilling box resistance after 2 washings for knit fabric
NF EN ISO 12945-1 /
ISO 6330
4h 14400 cycles 2x5A ; 40°C + drying according
care label
4