质量管理英文词汇
QM--quality management--质量管理quality manager质量经理
QE--quality engineer--质量工程师
QA--quality assurance--质量保证https://www.doczj.com/doc/2f18836960.html,*t0N Y&X q o QC--quality control--质量控制
IQC--incoming quality control--进料检验
f0U PQC--process quality control--制程检验
FQC--finished quality control--成品检验https://www.doczj.com/doc/2f18836960.html, C1I4A\3c m
OQC--outgoing quality control--出货检验质量SPC ,six sigma,TS16949,MSA,FMEA(x^:s
SQE--supplier quality engineer--供应商质量工程师六西格玛品质论坛Q D9b--[
QSE--quality system engineer--质量体系工程师
AQE--assistant quality engineer--质量助理工程师:{#`8C3S p.o h
PQE--process quality engineer--过程质量工程师六西格玛品质论坛
PQC--process quality control--制程检验
FQC--finished quality control--成品检验https://www.doczj.com/doc/2f18836960.html,'n#d$y-E*D d
VQA--Vendor quality assurance--供应商质量保证
parts per million，简称PPM}就是每百万坏品率少于3.H |H+F1T5r
全面质量管理（TQM）
质量一致性检验 inspecton of quality conformity
仲裁性质质量监督 quality supervision for arbitration
产品保护 product protection
产品定型 product approval
产品分等 product classificatin
产品规范 product specification
产品设计 product design
产品质量 product quality
产品合格率 product percent of pass
产品系列化 product seriation
产品管理标准 product management standard
产品计量单位 unit of measurement of product
产品售后服务 after service
产品质量标志 product quality mark
产品质量标准 product quality standard
产品质量管理 product quality management
产品质量检验 product quality inspection
产品质量监督检验 product quality supervision and inspection 产品质量认证标志 certification marking of product quality
产品质量认证程序 certification procedure of product quality 产品质量认证制度 certification system of product quality
认证 certification
立法 legislation
自行认证 self-certification
认可 accreditation
安全认证 safety certification
安全认证标志 mark of safety certification
强制性认证 compulsory certificate
实验室鉴定 laboratory qualification
实验室认证 laboratory certification
自愿认证制 voluntary system of certification
法规机构 regulatory authorities
认证活动 certification activity
认证体系 certification system
认证计划 certification scheme
认证机构 certification body
检验机构 inspecton body
许可证 licence
申请人 applicant
许可证持有者 licensee
合格证书 certificate of conformity
合格标记 mark of conformity
认证体系的利用 access to certification system
认证体系的参与者 participant in certification system
认证体系的成员 member of certification system
批准 approval
型式批准 type approval
测试实验室的认可 accreditation of testing laboratory
认可 accreditation
认可体系 accreditation system
认可机构 accreditation body
认可的实验室 accredited laboratory
认可准则 acreditatin criteria
实验室评定 laboratory assessment
实验室评定者 laboratory assessor
认可的实验室的试验报告 accredited laboratory test report
批准签署人 approved signatory
承认和批准协议 recognition and approval arrangement
承认协议 recognition arrangement
单边协议 unilateral arrangement
双边协议 bilateral arrangement
多边协议 multilateral arrangemetn
互利 reciprocity
平等待遇 equal treatmetn
国家待遇 national treatment
国家和平等待遇 national and equal treatment
合格及有关的通用概念 conformity and related general concept 合格 conformity
合格测试 conformity testing
合格 acceptable
合格品 acceptable part
合格标志 mark of conformity
合格认证 conformity certification
合格认证标志 mark of conformity certification 合格品标志 mark of acceptable product
合格证书 certificate of conformity
合格证检查 inspection by certificate
合格质量检查 acceptable quality level
评定合格 assessment of conformity
合格评定 conformity assessment
型式评价 type evaluation
合格监督 conformity surveillance
合格证明 verification of conformity
合格保证 assurance of conformity
供货商声明 supplier's declaration
生产许可证 production licence
一致 consensus
检验 inspection
不定期检验 nonperiodic inspection
抽样检验 sampling inspection
出厂检验 exfactory inspection
第一方检验 first party inspection
第二方检验 second party inspection
第三方检验 third party inspection
第三方认证制度 third pary certification
定期检验 periodic inspection
交收检验 acceptance inspeciton
例行检验 routine inspeciton
生产检验 produciton inspeciton
生产定型检验 production approval inspeciton 验收检验 acceptance inspeciton
验证检验 compliance test
仲裁检验 arbitration inspection
制造商担保 guarantee by manufacturer
百分比抽样检查 percent sampling inspection 不合格判定数 rejection number
不合格质量水平 rejecton quality level
抽查型质量监督 sampling quality supervision 环境监测 environmental monitoring
抽样 sampling
多次抽样 multiple sampling
分层抽样 stratified sampling
分层随机抽样 stratified random smapling
多级抽样 multistage sampling
二次抽样 double sampling
试件 test piece
试验报告 test report
试样 test sample
测试设备 testing equipment
测试试验室 testing laboratority
商标 trademark
商品名称 trade-name
测试 testing
试验 test
实验室间的试验比较 interlaboratory test comparisons 熟练水平试验 proficiency testing
次品 defective product
代用产品 substitute product
定量试验 quantitative test
出口管理 export control
出口许可证制度 export control
进口许可证制度 import licence system
定额管理 quota management
非关税壁垒 non-tarrif barrier
关税壁垒 tariff barrier
关税普遍优惠制 general preferential duties
Core value（核心价值）
Love 愛心
Confidence 信心
Decision 決心
Corporate culture(公司文化)
Integration 融合
Responsibility 責任
Progress 進步
3T STRATEGY
Time to market 及時切入生產
Time to volume 及時大量生產
Time to money 及時大量交貨
FOUR CONTROL SYSTEM 四大管制系統Engineering control system 工程管制系統
Quality control system品質管制系統Manufacturing control system生產管制系統
Management control system經營管制系統
7S
Classification整理(sorting, organization)-seiri
Regulation整頓(arrangement, tidiness)-seiton
Cleanliness清掃(sweeping, purity)-seiso
Conservation清洁(cleaning, cleanliness)-seiktsu
Culture教養(discipline)-shitsuke
Save 節約
Safety安全
二:英文縮寫
品質人員名稱類
QC quality control 品質管理人員
FQC final quality control 終點品質管制人員
IPQC in process quality control 制程中的品質管制人員OQC output quality control 最終出貨品質管制人員
IQC incoming quality control 進料品質管制人員
TQC total quality control 全面質量管理
POC passage quality control 段檢人員
QA quality assurance 質量保證人員
OQA output quality assurance 出貨質量保證人員
QE quality engineering 品質工程人員
品質保證類
FAI first article inspection 新品首件檢查
FAA first article assurance 首件確認
CP capability index 能力指數
CPK capability process index 模具製程能力參數
SSQA standardized supplier quality audit 合格供應商品質評估FMEA failure model effectiveness analysis 失效模式分析FQC運作類
AQL Acceptable Quality Level 運作類允收品質水準
S/S Sample size 抽樣檢驗樣本大小
ACC Accept 允收
REE Reject 拒收
CR Critical 極嚴重的
MAJ Major 主要的
MIN Minor 輕微的
Q/R/S Quality/Reliability/Service 品質/可靠度/服務
P/N Part Number 料號
L/N Lot Number 批號
AOD Accept On Deviation 特采
UAI Use As It 特采
FPIR First Piece Inspection Report 首件檢查報告
PPM Percent Per Million 百萬分之一
制程統計品管專類
SPC Statistical Process Control 統計製程管制
SQC Statistical Quality Control 統計品質管制
GRR Gauge Reproductiveness & Repeatability 量具之再制性及重測性判斷量可靠與否DIM Dimension 尺寸
DIA Diameter 直徑
N Number 樣品數
其它品質術語類
QIT Quality Improvement Team 品質改善小組
ZD Zero Defect 零缺點
QI Quality Improvement 品質改善
QP Quality Policy 目標方針
TQM Total Quality Management 全面品質管理
RMA Return Material Audit 退料認可
7QCTools 7 Quality Control Tools 品管七大手法
通用之件類
ECN Engineering Change Notice 工程變更通知(供應商)
ECO Engineering Change Order 工程改動要求(客戶)
PCN Process Change Notice 工序改動通知
PMP Product Management Plan 生產管制計劃
SIP Standard Inspection Procedure 製程檢驗標準程序
SOP Standard Operation Procedure 製造作業規範
IS Inspection Specification 成品檢驗規範
BOM Bill Of Material 物料清單
PS Package Specification 包裝規範
SPEC Specification 規格
DWG Drawing 圖面
系統文件類
ES Engineering Standard 工程標準
CGOO China General PCE龍華廠文件
IWS International Workman Standard 工藝標準
ISO International Standard Organization 國際標準化組織
GS General Specification 一般規格
部類
PMC Production & Material Control 生產和物料控制
PCC Product control center 生產管制中心
PPC Production Plan Control 生產計劃控制
MC Material Control 物料控制
DC Document Center 資料中心
QE Quality Engineering 品質工程(部)
QA Quality Assurance 品質保證(處)
QC Quality Control 品質管制(課)
PD Product Department 生產部
LAB Laboratory 實驗室
IE Industrial Engineering 工業工程
R&D Research & Design 設計開發部
生產類
PCs Pieces 個(根,塊等)
PRS Pairs 雙(對等)
CTN Carton 卡通箱
PAL Pallet/skid 棧板
PO Purchasing Order 采購訂單
MO Manufacture Order 生產單
D/C Date Code 生產日期碼
ID/C Identification Code (供應商)識別碼
SWR Special Work Request 特殊工作需求
L/N Lot Number 批號
P/N Part Number 料號
OEM Original Equipment Manufacture 原設備製造
PC Personal Computer 個人電腦
CPU Central Processing Unit 中央處理器
A.S.A.P As Soon As Possible 盡可能快的
E-MAIL Electrical-Mail 電子郵件
N/A Not Applicable 不適用
QTY Quantity 數量
I/O input/output 輸入/輸出
NG Not Good 不行,不合格
C=0 Critical=0 極嚴重不允許
APP Approve 核準,認可,承認
CHK Check 確認
ASS'Y Assembly 裝配,組裝
T/P True Position 真位度
5WIH When, Where, Who, What, Why, How to
6M Man, Machine, Material, Method, Measurement, Message
4MTH Man, Material, Money, Method, Time, How 人力,物力,財務,技術,時間(資源) SQA Strategy Quality Assurance 策略品質保證
DQA Design Quality Assurance 設計品質保證
MQA Manufacture Quality Assurance 製造品質保證
SSQA Sales and service Quality Assurance 銷售及服務品質保證
LRR Lot Reject Rate 批退率
SPS Switching power supply 電源箱
DT Desk Top 臥式(機箱)
MT Mini-Tower 立式(機箱)
DVD Digital Video Disk
VCD Video Compact Disk
LCD Liquid Crystal Display
CAD Computer Aided Design
CAM Computer Aided Manufacturing
CAE Computer Aided Engineering
PCB Printed Circuit Board 印刷電路板
CAR Correction Action Report 改善報告
NG Not Good 不良
WDR Weekly Delivery Requirement 周出貨要求PPM Percent Per Million 百萬分之一
TPM Total Production Maintenance 全面生產保養MRP Material Requirement Planning 物料需計劃OS Operation System 作業系統
TBA To Be Assured 待定,定缺
D/C Drawing Change
P/P Plans & Procedure
EMI Electrical-Music Industry 電子音樂工業 Electrical Magnetic Interference 電子干扰RFI Read Frequency Input 讀頻輸入
MMC Maximum Material Condition
MMS Maximum Material Size
LMC Least Material Condition
LMS Least Material Size
LED lighting-emitting diode 發光二极管
QBR Quarter Business Record
CIP Continuous improvement process
FGI Forecasted Goal Inventory
CNC Computerized numeral controller
B2C Business to customer
B2B Business to business
AVL Approved vendor list
POP Procedure of packaging
EOL End of life
VDCS Vender defect correcting sheet
PDCS Process defect correcting sheet
GRN Goods receiving note
A/R Accounting receivable
A/P Accounting payable
通用類
president董事長
operator作業員
position職務
general manager總經理
special assistant 特助
deputy manager |'depjuti| =vice manager副理
deputy supervisor =vice supervisor副課長
group leader組長
line leader線長
supervisor 課長
responsible department負責單位
Human Resources Department
人力資源部
Head count 人頭數
production department生產部門
planning department企劃部
QC Section品管課
stamping factory沖壓廠
painting factory烤漆廠
molding factory成型廠
administration/general affairs dept./總務部production unit生產單位
meeting minutes會議記錄
distribution department分發單位
subject主題
conclusion結論
decision items決議事項
pre-fixed finishing date預定完成日
Color management 顏色管理
Visual management 目視管理
production capacity生產力
first count初盤
first check初盤復櫂
second count 復盤
second check復盤復核
quantity of physical inventory second count 復盤點數量physical inventory盤點數量
physical count quantity帳面數量
difference quantity差異量
spare parts physical inventory list備品盤點清單cause analysis原因分析
waste materials廢料
description品名
specification 規格
model機種
work order工令
revision版次
remark備注registration登記
registration card登記卡
to control管制
application form for purchase請購單
consume, consumption消耗
to notify通知
to fill in填寫
to collect, to gather收集
statistics統計
cosmetic inspection standard 外觀檢驗規範
computer case 電腦外殼(組件)
personal computer enclosure 電腦機箱產品
front plate前板
rear plate后板
chassis |'∫?si| 基座
bezel panel面板
Hood 上蓋
base pan 基座
bezel 面板
riser card 擴充卡
flat cable 排線
TOP driver cage 上磁架
bottom driver cage 下磁架
resin film 樹脂膜
raw materials原料
materials物料
steel plate鋼板
roll/coil material捲料
spare parts =buffer備品
plastic parts塑膠件
sheet metal parts/stamping parts 沖件
material check list物料檢查表
finished product成品
semi-finished product半成品
good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品
disposed goods處理品
warehouse/hub倉庫
packing material包材
basket蝴蝶竺
plastic basket膠筐
flow chart流程表單
production tempo生產進度現狀
lots of production生產批量
manufacture procedure制程
to revise, modify修訂
to switch over to, switch—to, switching over切換
engineering bottleneck, project difficulty工程瓶頸glove(s)手套
glove(s) with exposed fingers割手套
Band-Aid創可貼
Industrial alcohol工業酒精
broom掃把
mop拖把
vacuum cleaner吸塵器
rag 抹布
garbage container灰箕
garbage can垃圾箱
garbage bag垃圾袋
liaison聯絡單
rags抹布
lamp holder燈架
to mop the floor拖地
to clean a table擦桌子
air pipe 氣管
delivery deadline交貨期
die worker模工
production, to produce生產
equipment設備
resistance電阻
beacon警示燈
coolant冷卻液
crusher破碎機
club car高爾夫球車
plate電鍍
power button電源按鍵
reset button重置鍵
forklift叉車
Workshop traveler 天車
trailer =long vehicle拖板車
Hydraulic trolley手壓車
hydraulic hand jack油壓板車
casing = containerization裝箱velocity速度patent專利
coordinate座標
supply and demand供求
career card履歷卡
barricade隔板
carton box紙箱
to pull and stretch拉深
work cell/work shop工作間
sub-line支線
bottleneck 瓶頸
模具工程類
plain die簡易模
pierce die沖孔模
forming die成型模
progressive die連續模
stage die工程模
compound die復合模
shearing die剪邊模
riveting die鉚合模
feature die公母模
male die公模
female die母模
cavity型控母模
core模心公模
die change 換模
to fix a die裝模
to repair a die修模
punch set上模座
punch pad上墊板
punch holder上夾板
stripper pad脫料背板
up stripper上脫料板
upper plate上模板
lower plate下模板
die pad下墊板
die holder下夾板
die set下模座
bottom block下墊腳
bottom plate下托板(底板)
upper supporting blank上承板upper padding plate blank上墊板top plate上托板（頂板）
top block上墊腳
stripping plate內外打(脫料板) outer stripper外脫料板
inner stripper內脫料板
lower stripper下脫料板punch沖頭insert入塊(嵌入件)
deburring punch壓毛邊沖子
groove punch壓線沖子
stamped punch字模沖子
round punch圓沖子
special shape punch異形沖子
bending block折刀
roller滾軸
baffle plate擋塊
located block定位塊
supporting block for location
定位支承塊
air cushion plate氣墊板
air-cushion eject-rod氣墊頂桿trimming punch切邊沖子
stiffening rib punch = stinger 加強筋衝子ribbon punch壓筋沖子
reel-stretch punch卷圓壓平沖子
guide plate定位板
sliding block滑塊
sliding dowel block滑塊固定塊
die locker鎖模器
pressure plate =plate pinch壓板thickness gauge厚薄規
cutting die, blanking die沖裁模
die block模塊
folded block折彎塊
sliding block滑塊
location pin定位銷
lifting pin頂料銷
die plate, front board模板
padding block墊塊
stepping bar墊條
panel board鑲塊
to load a die裝上模具
to unload a die 御模具
active plate活動板
lower sliding plate下滑塊板
upper holder block上壓塊
upper mid plate上中間板
spring box彈簧箱
spring-box eject-rod彈簧箱頂桿
spring-box eject-plate彈簧箱頂板bushing block襯套
cover plate蓋板
guide pad導料塊
pilot導正筒
trim剪外邊
pierce剪內邊
pocket for the punch head挂鉤槽
slug hole廢料孔
radius半徑
shim/wedge/heel/pad/spacer/gasket楔子torch-flame cut火焰切割
set screw止付螺絲
form block折刀
round pierce punch =die button圓沖子shape punch =die insert異形子
stock located block定位塊
metal plate鈑金
miller銑床
grinder磨床
tolerance公差
score =groove壓線
sliding block滑塊lathe車
active plate活動板
baffle plate擋塊
cover plate蓋板
groove punch壓線沖子
air-cushion eject-rod氣墊頂桿
spring-box eject-plate彈簧箱頂板capability能力
parameter參數
factor系數
driller鉆床
set up die架模
height of die setting up架模高度analog-mode device類模器
inner guiding post內導柱
inner hexagon screw內六角螺釘
dowel pin固定銷
coil spring彈簧
lifter pin頂料銷
eq-height sleeves =spool等高套筒
pin銷
lifter guide pin浮升導料銷
guide pin導正銷
wire spring圓線彈簧
outer guiding post外導柱
stop screw止付螺絲
located pin定位銷
outer bush外導套
press specification沖床規格
die height閉模高度
flow mark流痕
welding mark溶合痕
post screw insert螺紋套筒埋值
self tapping screw自攻螺絲
stripper plate脫料板
piston活塞
handle mold手持式模具
flash mold溢流式模具
positive mold擠壓式模具
split mold分割式模具
die lifter舉模器
top stop上死點
bottom stop下死點
one stroke一行程
to continue, cont.連動
to grip(material)吸料
location lump, locating piece, location block定位塊reset復位
to file burr 銼毛刺
embedded lump |in'bed| |lùmp|鑲塊
stamping-missing漏沖
to tight a bolt擰緊螺栓
to loosen a bolt擰鬆螺栓
punched hole沖孔
to cut edge =side cut =side scrap 切邊
to bending折彎
to pull, to stretch拉伸
engraving, to engrave刻印
stamping 油印
to stake鉚合
designing, to design設計
design modification 設計脩改成
gauge(or jig)治具
pedal踩踏板
stopper阻擋器
flow board流水板
torque扭矩
spline =the multiple keys花鍵
quenching淬火
tempering回火
annealing退火
carbonization碳化
alloy合金
tungsten high speed steel鎢高速的moly high speed steel鉬高速的forming成型(抽凸,沖凸)
draw hole抽孔
bending折彎
emboss凸點
dome凸圓
semi-shearing半剪
stamp mark沖記號
deburr or coin壓毛邊
punch riveting沖壓鉚合
side stretch側沖壓平
reel stretch卷圓壓平
groove壓線
stamp letter沖字(料號)
tick-mark nearside正面壓印
tick-mark farside反面壓印extension DWG展開圖procedure DWG工程圖
die structure DWG模具結構圖
沖壓類
punch, press沖
punching machine 沖床hydraulic machine油壓機
jack升降機
decoiler整平機
manufacture management製造管理stamping, press沖壓
feeder送料機
rack, shelf, stack料架
taker取料機
to reverse material 翻料
to load material上料
to unload material卸料
to return material/stock to退料scraped |'skr?pid|報廢
scrape ..v.刮;削
robot機械手
production line流水線packaging tool打包機packaging打包
成型類
well type蓄料井
insulated runner絕緣澆道方式hot runner熱澆道
runner plat澆道模塊
valve gate閥門澆口
band heater環帶狀的電熱器spindle閥針
spear head鉋尖頭
slag well冷料井
cold slag冷料渣
air vent排氣道
welding line熔合痕
eject pin頂出針
knock pin頂出銷
return pin回位銷反頂針sleeve套筒
stripper plate脫料板
insert core放置入子
runner stripper plate澆道脫料板guide pin導銷
eject rod (bar)（成型機）頂業捧subzero深冷處理
three plate三極式模具
runner system澆道系統
stress crack應力電裂orientation定向
sprue gate射料澆口，直澆口nozzle射嘴
sprue lock pin料頭鉤銷(拉料杆) slag well冷料井
side gate側澆口
edge gate側緣澆口
tab gate搭接澆口
film gate薄膜澆口
flash gate閘門澆口
slit gate縫隙澆口
fan gate扇形澆口
dish gate因盤形澆口
diaphragm gate隔膜澆口
ring gate環形澆口
submarine gate潛入式澆口
tunnel gate隧道式澆口
pin gate針點澆口
runner less無澆道
sprue less 無射料管方式
long nozzle延長噴嘴方式
spur澆口;溶
waste廢料
board看板
sliding rack滑料架
to impose lines壓線
to compress, compressing壓縮character die字模
to feed, feeding送料
material change, stock change材料變更feature change 特性變更
prepare for, make preparations for 準備rotating speed, revolution轉速abnormal handling異常處理Assembly line組裝線
Layout布置圖
Conveyer流水線運輸帶
Rivet machine拉釘機
Rivet gun拉釘槍
Screw driver起子
Electric screw driver電動起子Hydraulic machine 液壓機Pneumatic screw driver氣動起子automation自動化
to stake, staking, riveting鉚合
add lubricant oil加潤滑油
argon welding氬焊
cylinder油缸
robot機械手
conveying belt輸送帶
transmission rack輸送架
to draw holes抽孔
bolt螺栓
nut 螺母
screw 螺絲
identification tag標示單
screwdriver plug起子插座
automatic screwdriver電動啟子
to move, to carry, to handle搬運
be put in storage入庫
packing包裝
staker = riveting machine鉚合機
fit together組裝在一起
fasten鎖緊(螺絲)
fixture 夾具(治具)
pallet/skid棧板
barcode條碼
barcode scanner條碼掃描器
fuse together熔合
fuse machine/heat stake熱熔機
processing, to process加工
delivery, to deliver 交貨
to return delivery to. to send delivery back to return of goods退貨easily damaged parts易損件
standard parts標準件
to lubricate潤滑
spring 彈簧
spare tools location/buffer手工備品倉
spare molds location模具備品倉
tox machine自鉚機
烤漆類
phosphate皮膜化成
viscosity涂料粘度
alkalidipping脫脂
main manifold主集流脈
organic solvent有機溶劑
demagnetization去磁;消磁
high-speed transmission高速傳遞
heat dissipation熱傳
rack上料
volatile揮發性
degrease脫脂
rinse水洗
alkaline etch齡咬
desmot剝黑膜
D.I. rinse純水次
Chromate鉻酸處理
Anodize陽性處理
seal封孔
scraped products報放品
disposed products處理品
dismantle the die折模
auxiliary function輔助功能
heater band 加熱片
thermocouple熱電偶
derusting machine除銹機
degate打澆口
dryer烘干機
induction感應
induction light感應光
response =reaction =interaction感應
ram連杆
edge finder巡邊器
concave凸
convex凹
cold slug冷塊
blush 導色
gouge溝槽;鑿槽
satin texture段面咬花
witness line證示線
grit沙礫
granule =pellet =grain細粒
sand blasting噴沙
grit maker抽粒機
cushion緩沖
fillet鑲;嵌邊
roller pin formality滾針形式
cam driver鍘楔
shank摸柄
crank shaft曲柄軸
品質類
qualified products, up-to-grade products良品defective products, not up-to-grade products不良品defective product box不良品箱
poor processing 制程不良
poor incoming part來件不良