当前位置:文档之家› 电子海图题库(第三次修订版)

电子海图题库(第三次修订版)

电子海图题库(第三次修订版)
电子海图题库(第三次修订版)

故障代码类:

1. 031:sensor adapter 2 COM timeout

2. 257:Gyro 3 com error

3. 380:AIS COM ERROR

4. 450:heading sensor not available

5. 470:datum change

6. 495:anchor watch error

7. 635:no official data

8. 640:chartalign:over 30 min

9.820:navtex message received

考点(题中穿插):

1.DISP SETTING(chart watch sector)

2.Basic setting:shallow pattern

Chart disp:AIO

Symbol disp:magnetic variation

Chart alert:shallow contour,safety depth,safety contour, deep contour

3.GREEN:license ok,chart is up-to-date

ORANGE:license is valid,but not up-to-date

Magenta:license is valid,but not loaded to the ECDIS YELLOW:license ok,up-to-date status doubtful

RED:not available or expired

BLUE:canceled chart

单选题(目前72个,未完待续)

1.how do you get information on an ENC object(buoy-beacon-berth etc)on the FURUNO ECDIS?

A.I right click on the use chart function in the route planning tool.

B.I click on the chart info in the instant access bat

C.I enter click on the object.

D.I right click on the object

估计答案:D

正确答案:

2.where can you find a list of the manual updates that have been applied to the FURUNO ECDIS?

A.in the chart legend

B.In the manual update window

C.In the chart catalogue

D.In the chart display menu

估计答案:B

正确答案:

3.how can you see if a chart object i cteated using manual updates?

A.the manual update will be larger than any other chart objects

B.It is always shown in red

C.It will have a special orange marker

D.There is no way i can see if a chart object is created using manual updates

估计答案:C

正确答案:

4.How do you add navigation chart objects to the FURUNO ECDIS when you are require to do so by notices to mariners?

A.i can not add any chart objects to the ECDIS unless they are included in the weekly update

B.I use the manual update function

C.I use the user chart function

D.I use the chart edit function

估计答案:我估计选B 老大选D

正确答案:

5.how can you verity which route is being monitored?

A.by clicking on the “route”and then on “route info”in the quick

access sidebar in Plan mode

B.The mame of the route will be displayed in the status bar

C.By clicking on “route”and then on “route info” in the quick access sidebar in Navi mode

D.I can not get information on the route which is being monitored 估计答案:C

正确答案:C

6.where do you switch between multicolor and two color setting for the chart?

A.in chart legend

B.In symbol display

C.In basic setting

D.In chart display

估计答案:C 网上选C

正确答案:C

7.what should you remember to set up first when planning a route?

A.the setting for the voyage log

B.The alarm level in the operation submenu

C.The safety contour in the route planing tool

D.The radar overlay

估计答案:C

正确答案:C

8.Which ECDIS setting is adjusted in ship and route parameters?

A.chart alignment 排列图

B.Safety contour

C.Maximum rate of turn(MAX.R.O.T)

D.Safety depth

估计答案:C

正确答案:C

9.When do you use a manual update?

A.always when i have to update my charts

B.When i receive information which must be displayed on my ECDIS and this is not yet included in the official weekly updates

C.I should never use manual updates

D.When i have to update the software of the ECDIS

估计答案:B

正确答案:

10.How do you hide(not delete) a manual update objetc?

A.i select clear from the manual update menu

B.I select undo last from the manual update menu

C.I deselect that general type of chart object in the chart display dialogue

D.I deselect the option from the symbol display dialogue

估计答案:A

正确答案:

11.Can you create a manual update from an AIS safety message shown on the ECDIS?

A.yes-by manually creating the object

B.Yes-by letting the ECDIS creat the object antomatically

C.Yes-either by creating it manually or letting the ECDIS create it automatically

D.No

估计答案:A

正确答案:

12.which recording function is available in the FURUNO ECDIS?

A.gyro log

B.Engine log

C.Ship’s log

D.Details log

估计答案:D

正确答案:D

13.How do you update your vector charts on the FURUNO ECDIS using the ENC update CD?

A.i use the autoload function

B.I cteate a manual update from the information on the CD

C.I creat a user chart

D.I import the information using the chart details function in the chart catalogue

估计答案:A

正确答案:

14.can you edit the user chart when the ECDIS is in Navi mode?

A.Yes

B.Only if the user chart is not linked to a route plan

C.Yes if the user chart contains no tidal information

D.No

估计答案:D

正确答案:

15.Can you edit a route without removing it from the route monitoring function?

A.No

B.Yes,but i must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS

C.Yes,if i create a copy of the route plan in ANTS format on a USB and edit the file on a normal offrice PC

D.Yes,if i select copy from monitor in the route plan menu and edit the copy.when copying is completed i select-exchange with monitor in the plan menu

估计答案:D

正确答案:

16.Which operation can you perform on the FURUNO ECDIS?

A.i can record my position manually on the ENCS

B.I can set the ECDIS to automatically shoosing a safety contour based on my setting of ship’s maximum draft

C.I can set ship’s maximum height to enable chart alerts from areas in charts where there is not sufficient air draft

D.I can send a copy of my route plan to an AIS target as a safety message

估计答案:C

正确答案:

17.which informatin can you find in VECTOR CHART LEGEND?

A.T&P notice

https://www.doczj.com/doc/135541465.html,

C.Warning

D.Safety contour setting

估计答案:B

正确答案:B

18.Where do you select the color Palette(颜色暗淡模式)used to display the charts?

A.in chart legend

B.In chart display

C.In quick accessor bar

D.In chart catalogue

估计答案:C 网上选C

正确答案:C

19.Which information can you find in the Raster Chart Legend?

A.horizontal datum

B.Safety depth

https://www.doczj.com/doc/135541465.html,er permit number

D.License number

估计答案:A

正确答案:A

20.Which information can you find in the Raster Chart Legend?

A.shallow water

B.Chart name

C.Chart viewing date

D.Depth contour

估计答案:B

正确答案:B

21.Which information can you find in the Vector Chart Legend?

A.notice to mariner

B.Presentation library edition number

C.Chart edition & update date

D.Safety contour setting

估计答案:C

正确答案:C

22.How can you tell if your FURUNO ECDIS is displaying an ENC?

A.there is an”ENC data available”indication in the own ship functions box

B.there is an”RNC data ”indication in the own ship functions box

C.The FURUNO ECDIS will give an audible alarm if i am not viewing an ENC

D.There is no special indication in the own ship functions box

估计答案:A 网上选D

正确答案:

23.How do you manually record Own Ship's current position in the Logs?

A.by opening the voyage log and entering the current position

B.By right clicking on own ship icon on the use interface

C.By press the record button on the control unit

D.By using the record position event function of the event log

估计答案:D

正确答案:

24.What is a Manual Update?

A.A manual update is an update applied using the manual function in load & update charts

B.A manual update is an update to the charts created by the operator from information received from pilot-a navtex message-a VHF broadcast etc.

C.A manual update is an update to the charts by an official representative of the chart producer

D.A manual update is a chart created using the digitizer function of FURUNO ECDIS

估计答案:B

正确答案:

25.What should you do if you have to leave your planned route during a voyage?

A.switch off the FURUNO ECDIS and concentrate on the radar

B.Disable the routing monitoring on the RURUNO ECDIS

C.Change the display of the FURUNO ECDIS to all IMO all other

D.Configue and enable the check area function to assis me in scaning the ENCS for danger to navigation and hazardous objects

估计答案:D

正确答案:

26.Which operation can you perform(进行)on the FURUNO

ECDIS?

A.I can record target ship’s position in the voyage log automatically

B.I can record a position fix manually bu using just one distance and one bearing

C.I can playback my past voyage track on the charts

D.I can send my route plan and user chart and notes to FURUNO GPS for displaying the GPS

估计答案:C

正确答案:

27.Where can you change the settings for the Safety Contour used for monitoring?

A.nowhere-because i must never change the setting for the safety contour

B.In the setting menu and i can only change the setting if i have the service password

C.In chart alert

D.In the route planing tool

估计答案:C

正确答案:

28.Which color scheme is used for a Manual update on the Furuno ECDIS?

A.blue ENC symbols

B.standard ENC symbols

C.orange ENC symbols

D.red ENC symbols

估计答案:C

正确答案:

29.Which setting can be changed in Sensors?

A.log stabilization mode

B.Safety contour setting

C.Safety depth setting

D.Kalmen filter setting

估计答案:A

正确答案:A

30.Where do you change the Ship Outlines(轮廓)?

A.in the quick access bar

B.In chart display

C.In symbol display

D.In the status bar

估计答案:C

正确答案:C

31.Can you set the overall maximum speed for a route plan?

A.yes in the ship and route parameters of menu

B.In chart display

C.Yes in optimization parameters

D.Yes in the route planing tool

估计答案:A

正确答案:A

32.Which information can you find in the Vector Chart Legend?

A.magtinec variation

B.Base CD number

C.Permit expiration date

D.Safety contour setting

估计答案:A

正确答案:

33.Where do you change the Velocity Vectors style?

A.in the quick access bar

B.In chart display

C.In symbol display

D.In the status bar

估计答案:C

正确答案:C

34.Where can you find information concerning the charts stored on the HDD(硬盘驱动器)?

A.on the internet

B.The chief officer will know

C.In the chart catalogue

D.In the chart display menu

估计答案:C 或D(可能性比较大) 网上选C

正确答案:

35.How do you document(记录) your previous voyage on the FURUNO ECDIS?

A.I use my paper logbook as documentation

B.I use my paper logbook and my VDR or SVDR as documentation

C.I use the tracking function in the symbol display

D.I show a playback of my past voyage track on the charts

估计答案:D

正确答案:

36.Which operation can you perform during a voyage or after completion of a voyage?

A.i can use the record function to record special events in the voyage log

B.I can create and save a screen shot(截屏) for future reference

C.I can view and print a copy of details log

D.I can connect the ECDIS to the internat and upload all documentation to an external storage

估计答案:A

正确答案:

37.Which information can you find in the Raster Chart Legend?

A.magnetic variation

B.Safety contour setting

C.Quality of data

D.T&P notice

估计答案:A

正确答案: A

38.How can you reset the odometer?

A.I can reset the odometer from the voyage tab of the menu

B.I can reset the odometer from the sensor setting dialogue

C.I can reset the odometer from the symbol display dialogue

D.I can reset the odometer from the quick access sidebar

估计答案:A

正确答案: A

39.Can you plan a route while you monitor another route?

A.No

B.Yes but only if i have two ECDIS

C.Yes the routing planing function is independent(不相关联的) from the route monitoring function

D.Yes but i must select the safety contour for both route plan

估计答案:C

正确答案: C

40.Where do you find information on the software version of the FURUNO ECDIS?

A.in the voyage log

B.In the system dialogue of the menu

C.In the about dialogue

D.In the S52 presentation library(图书馆)

估计答案:C

正确答案: C

41.How are loaded ENCs converted into SENCs when updating?

A.the FURUNO ECDIS will normally convert(转变) the ENCs to SENCs automatically

B.I must use the conversion tool(转变工具)from the menu

C.I can not convert the ENCs to SENCs

D.I load the new permit file using the file named ENC.PMT and then i use S52 presentation library from the system menu in the chart menu to convert the ENCs to SENCs

估计答案:D

正确答案:

42.How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?

A.I can not add any chart objects to the ECDIS unless they are

included in the weekly update CD

B.I use the manual update function

C.I use the user chart function

D.I use the chart edit function

估计答案:B(类似于第4题)

正确答案:

43.How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?

A.i select rather chart in the main menu

B.I selet RNC in the chart legend

C.I lelect raster chart from the drop down list in the status bar

D.I selet RNC in the chart catalogue

估计答案:C

正确答案: C

44.Which operation can you perform after completion of a voyage?

A.i can add additional records of manual positions to the voyage log adding further details to the past voyage

B.I can cteate a user chart from the monitored route plan and save it to a USB memory device

C.I can create a backup copy of the voyage plan on a USB memory device

D.I can view and print a copy of the chart usage log(chart alert)

估计答案:D

正确答案: D

45.What is the maximum limit of the Check Area?

A.NO limit

B.240min+20nm+5km+999m

C.120min+10nm+3km+500m

D.999min+999nm+999km+999m

估计答案:B

正确答案: B

46.Which ECDIS setting is activated in Ship and Route Parameters?

A.Gyro error

B.Safety contour

C.Notes alarm time

D.Ship’s minimum speed

估计答案:A

正确答案: A

47.Where do you offset own ship chart position on the FURUNO ECDIS?

A.in symbol display

B.In chart display

C.In chart menu

D.In own ship functions box

估计答案:D

正确答案: D

48.Where do you set system priority of multiple GPS connected to the FURUNO ECDIS?

A.In the sensor dialogue

B.In basic setting.

C.In ship and route parameters

D.In nav tools

估计答案:A

正确答案: A

49.Where do you change the Targets color?

A.in the quick access bar

B.In chart display

C.In symbol dispaly

D.In the status bar

估计答案:C

正确答案: C

50.Where do you control the settings and visibility of the chart layers?

A.in chart legend

苏北运河船舶过闸管理办法

苏北运河船舶过闸管理办法 (征求意见稿) 第一章总则 第一条为了加强苏北运河船舶过闸管理,规范船舶过 闸行为,提高船闸运行效率,保障船舶安全、有序、快捷地通过船闸,根据《江苏省航道管理条例》、交通运输部《船闸管理办法》等法规、规章的规定,结合苏北运河船闸实际,制定本 办法。 第二条苏北运河解台至施桥十个梯级船闸的船舶过闸 及其监督管理适用本办法。 第三条省交通运输主管部门主管苏北运河船舶过闸的 管理工作。省交通运输主管部门所属的航道管理机构及其船 闸管理单位(以下简称“苏北运河航道管理机构”)具体负责苏 北运河船闸的运行、养护、保护和管理工作。 有关海事管理机构依据职责,负责苏北运河通航秩序管理,配合航道管理机构做好船舶过闸管理工作。 第四条苏北运河航道管理机构应当按照有关技术规范、操作规程和运行制度,科学调度、依法管理苏北运河船闸,为 船舶提供安全、及时、方便的通过条件。 第五条苏北运河航道管理机构和苏北运河沿线海事管 理机构应当建立健全苏北运河水上交通安全和船舶过闸应急

预案,落实工作责任,保障航道安全畅通。 第二章一般规定 第六条通过苏北运河的船舶(以下简称“过闸船舶”)应 当按照国家有关规定标明船名、船籍港、载重线等标志,随船携带《船舶检验证书》、《船舶签证簿》等合法有效的船舶证书,方便船闸登记、调度以及过闸确认。 第七条符合下列尺度的船舶可以正常通过苏北运河船闸: (一)货轮总长68米以下、总宽15.8米以下; (二)拖带船队总长440米以下、总宽10.8米以下; (三)顶推船队总长220米以下、总宽15.8米以下; (四)船舶吃水3.6米以下。 第八条船舶有下列情形之一的,禁止通过苏北运河船闸: (一)货轮总长超过90米或者总宽超过15.8米; (二)拖带船队总长超过440米或者总宽超过15.8米; (三)顶推船队总长超过220米或者总宽超过15.8米; (四)船舶吃水超过3.6米; (五)船舶无标志或者标志不能识别。 第九条总长超过68米但在90米以下的货轮,以及驳

电子海图题目整合(第三次修订版)

单选题(目前72个,未完待续) 1.how do you get information on an ENC object(buoy-beacon-berth etc)on the FURUNO ECDIS? A.I right click on the use chart function in the route planning tool. B.I click on the chart info in the instant access bat C.I enter click on the object. D.I right click on the object 估计答案:D 正确答案: 2.where can you find a list of the manual updates that have been applied to the FURUNO ECDIS? A.in the chart legend

B.In the manual update window C.In the chart catalogue D.In the chart display menu 估计答案:B 正确答案: 3.how can you see if a chart object i cteated using manual updates? A.the manual update will be larger than any other chart objects B.It is always shown in red C.It will have a special orange marker D.There is no way i can see if a chart object is created using manual updates 估计答案:C 正确答案: 4.How do you add navigation chart objects to the FURUNO ECDIS when you are require to do so by notices to mariners? A.i can not add any chart objects to the ECDIS unless they are included in the weekly update B.I use the manual update function C.I use the user chart function

AWENA-1型船载电子海图系统(ECS)介绍

AWENA-1型船载电子海图系统(ECS) AWENA-1船载型电子海图系统(ECS)(前生AWENA-1船舶智能导航仪)是电子航行参考图显示系统(IHO S-57)和船舶智能避碰系统综合应用开发具有完全知识产权的新型船舶助导航产品,符合中国海事局《国内航行船舶船载电子海图系统(ECS)功能、性能和测试要求(暂行)》中的A级设备要求。能有效改善船舶航行的安全性,自动判别周围船舶的多种航行信息,结合电子航行参考图显示系统,实现了航行信息综合显示和智能辅助导航。 ?产品特点: 1. 本机采用模块化设计,以电子海图系统(ECS)为基本显示平台,与各导航传感器的合适组合构成了一套完整的,精确的,综合定位系统,并提供先进的,便捷的最佳化定位功能,有利于安全航行,触摸式的系统操作,更人性化。 2. 具有完全的自主知识产权全中文电子航行参考图显示平台,以S-52标准进行显示国际标准(IHO S-57)的电子海图,具有航线设计功能,并可在图上设置本船安全等深浅和安全水深,并突出显示。 3. 系统可接收处理AIS、GPS、罗经、测深仪、计程仪等设备的输入信息,给出与本船航行有关的周围动态交通状况显示,在航路监视同时,综合分析发生各类碰撞、搁浅、误入禁止区等危险的可能,提前警告,并试验解决途径,提供驾驶员安全规避的操作方案。 4.报警功能:监视各种航行危险并智能计算周围船舶的航行信息,为

船舶提示最危险的航行船舶:到达(接近)转向点指标,超出航迹偏移极限,越过安全等深浅,搁浅危险,接近孤立危险物,接近禁止区域,定位传感器故障等,都会报警。CPA/TCPA计算及报警(声光报警)。 5. 航迹记录:系统记录最近本船12小时内每分钟的实际航迹,可保 存最近3个月的本船实际航迹的独立航行记录。 6、提供国家海事局官方出版的电子海图预安装服务,同时也提供国 家海事局官方提供的电子海图升级安装服务(服务收费)。国家海事局官方出版的电子海图包含国内沿海和长江电子海图数据.海图信息包含的海图版本号,生产日期和套数号码,每套海图数据只能安装该条船只,船检也将对应船只进行相关信息的检查。 7提供用户、上海海事局航海图书印制中心和上海埃威航空电子有限公司三方共同签订提供电子海图数据的相关协议.上海埃威航空电子有限公司将签订的相关信息提供给国家海事局海图出版中心备案。 8. 在签订电子海图预安装服务(服务费1000元)和三方协议后,海 埃威航空电子有限公司将预先安装国家海事局官方出版的电子海图包含国内沿海和长江电子海图数据.用户可以在中国海事电子海图发行网站注册登记网址为(.10/chart),并可获得用户名\密码,免费下载相关的海图更新数据.同时也可以选择由上海埃威航空电子有限公司提供的一季度一次的海图数据升级光盘服务(有偿),保证相关海图数据产品源于官方正规渠道。

FURUNOECDISMultipleChoiceTest古野电子海图题库测精彩试题

1. Which operation can you perform on the FURUNO ECDIS? ( B ) a. I can play back my ship’s past track on the ECDIS b. I can record my position manually on the RNCs. c. I can create Notes from my Voyage Log to document a voyage on the charts. d. I can set the ECDIS to include engine log information into the Voyage Log automatically. 2. Which operation can you perform on the FURUNO ECDIS? ( A ) a. I can record my position manually on the ENCs. b. I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft. c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft. d. I can send a copy of my Route Plan to an AIS target as a Safety Messag e. 3. Which operation can you perform on the FURUNO ECDIS? ( C ) a. I can record target ship’s position in the Voyage log automatically. b. I can record a position fix manually by using just one distance and one bearing. c. I can playback my past voyage track on the charts. d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS. 4. Which operation can you perform with the FURUNO ECDIS? ( D ) a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR. b. I can send my Route Plan and User Chart to any AIS for display on the AIS. c. I can send my Route Plan and User Chart to any GPS for display on the GPS. d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR. 5. Which operation can you perform during a voyage? ( A ) a. I can use the Event function to record special events in the Event Log. b. I can create a User Chart from the Alert Log and save it to a USB memory device. c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device. d. I can create a User Chart from the Voyage Log and save it to a USB memory devic e. 6. Which operation can you perform after completion of a voyage? ( D ) a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage. b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device. c. I can create a backup copy of the Voyage log on a USB memory device. d. I can view and print a copy of the Chart Usage Log. 7. Which operation can you perform during a voyage or after completion of a voyage? ( B ) a. I can use the Event function to record special events in the Details Log. b. I can view and print a copy of the Voyage Log. (或更换为Details Log) c. I can create a backup copy of Own Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference. d. I can reset the Chart Usage Log after creating a backup copy. 8. What is a Manual Update? ( B ) a. A Manual Update is an update applied using the Manual function in Load & Update Charts. b. A Manual Update is an update to the charts created by the operator from information received from the Pilot – a Navtex message – a VHF broadcast et c. c. A Manual Update is an update applied to the charts by an official representative of the chart

电子海图教(学)案电子海图系统方案

第一章电子海图与电子海图系统 第一节电子海图与标准电子海图 随着计算机技术与航海技术的不断发展,产生了以数字形式表示的海图以及各种电子海图应运系统。它们的出现是水道测量领域的一场新技术革命,使海图研究,生产以及使用跨入了一个新的纪元,也促使航海自动化迈上新的台阶。 所谓的电子海图(Electronic chart, EC)是在显示器上显示出海图信息和其他航海信息,所以也称“屏幕海图”。电子海图及其应用环境组成电子海图系统。 一、电子海图 电子海图是描述海域地理信息和航海信息的数字化产品,主要涉及海洋及其毗邻的陆地。详细的描述了岸形、岛屿、礁石、浅滩、沉船、水深、地质、助航标志、潮流、海流等航海所需的资料。 电子海图按照制作方法可分为矢量电子海图和光栅电子海图两大类。 (一)矢量电子海图(Vector Charts) 以矢量形式表示的数字海图。海图中的每个要素是以点、线、面等几何图形的形式存储在电子海图数据文件中、具有存储小、显示速度快、精度高、支持智能化航海等优点。用户查询电子海图中任意图标的细节(如灯标、颜色、周期)可根据需要有选择的显示不同的层次信息(如只显示小于10M的水深点)。矢量电子海图与其他的船舶系统相结合,能提供警戒区、危险区等自动报警功能。矢量电子海图被称为“智能电子海图”。 (二)光栅电子海图(Raster Charts) 以光栅形式表示的数字海图,通过对纸质的海图的一次性扫描,形成单一的

数字信息文件;以像素的排列反映海图中的要素,依靠眼睛识别航海要素。因此,光栅电子海图被认为是纸质海图的复制品,它包含的信息(如岸线、水深等)如纸质海图一一对应。光栅电子海图也可与定位传感器(如GPS)连接,但由于光栅电子海图制作原理上的局限性,光栅电子海图不能够提供选择性的查询和显示功能(如查询某一海图要素特征,或隐去某类海图要素特征等)。光栅电子海图被称为“非智能电子海图”。 目前,电子海图以矢量电子海图为主,光栅电子海图是在没有矢量电子海图的海域作为补充使用。 二、标准的电子海图 随着电子海图的发展,相关国际组织通过制定标准规范和统一的电子海图的数据格式,随之产生了标准的光栅电子海图和矢量电子海图,即光栅扫描航海图和电子航海图。 (一)光栅扫描航海图(Raster Navigational Chart, RNC) 符合国际水道测量组织(IHO)《光栅海图产品规范》S-61的光栅电子海图,是通过国家水道部或国家水道部授权出版的海图数字扫描而成,并与显示系统结合提供连续的自动定位功能的电子海图。 RNC具有以下属性: (1)由官方纸质海图复制而成; (2)根据国家标准制作; (3)内容的保证由发行数据的水道测量局负责; (4)根据数字化分发的官方改正数据进行定期改正。 RNC通常用于单一的海图或海图集的一些标准中。目前世界上主要的光栅扫描航海图产品有英国水道测量局(UKHO)生产的ARCS和美国国

电子海图题库(第三次修订版)

故障代码类: 1. 031:sensor adapter 2 COM timeout 2. 257:Gyro 3 com error 3. 380:AIS COM ERROR 4. 450:heading sensor not available 5. 470:datum change 6. 495:anchor watch error 7. 635:no official data 8. 640:chartalign:over 30 min 9.820:navtex message received 考点(题中穿插): 1.DISP SETTING(chart watch sector) 2.Basic setting:shallow pattern Chart disp:AIO Symbol disp:magnetic variation Chart alert:shallow contour,safety depth,safety contour, deep contour 3.GREEN:license ok,chart is up-to-date ORANGE:license is valid,but not up-to-date

Magenta:license is valid,but not loaded to the ECDIS YELLOW:license ok,up-to-date status doubtful RED:not available or expired BLUE:canceled chart 单选题(目前72个,未完待续) 1.how do you get information on an ENC object(buoy-beacon-berth etc)on the FURUNO ECDIS? A.I right click on the use chart function in the route planning tool. B.I click on the chart info in the instant access bat C.I enter click on the object. D.I right click on the object 估计答案:D 正确答案: 2.where can you find a list of the manual updates that have been applied to the FURUNO ECDIS? A.in the chart legend B.In the manual update window C.In the chart catalogue D.In the chart display menu

ECDIS电子海图操作规程教学文稿

E C D I S电子海图操作 规程

FMD-3100型ECDIS电子海图操作规程1.开关机 按电源开关,开机和关机。 2.选择背景颜色 单击PALAETTE(背景)按钮,根据需要选择DAY(白天)、DUSK(黄昏)、NIGHT(夜晚)。再根据需要选择背景颜色。 3.亮度调整 操作BRILL(亮度)控制钮调整亮度。顺时针转动增加亮度;逆时针转动降低亮度。 4.设计航线 点击PLAN→PLANNING→ROUTE,打开航线计划对话框,单击NEW按钮后,使用光标在海图上选择航路点,根据需要在ROUTE PLAN(航线计划)对话框中输入名称、操舵模式、半径、计划速度等所有航点完成后点击SAVE(保存)→OK完成。 5.航线检查 单击CHECK ROUTE开始检查,检查通过后点击SAVE(保存)。 6.调用航线 在航行模式中,右键单击ROUTE INFORMATION(航线信息),选择SELECT ROUTE(选择航线)单击OPEN(打开)。

在界面中点击ROUTE PLAN→PLANNING→ROUTE→选择所需航线打开。 AVCS ENC 使用指南 使用NAVTOR-AVCS海图所用的海图安装和更新都可以用NAVSTICK这个U盘完成,请务必保存好。 1.互联网更新海图的方法 使安装有NAVTOR NAVSYNC 的电脑,链接到互联网,双击NAVTOR NAVSYNC图标,等待程序联网结束,按提示将NAVSYNC 这个U盘插入到电脑,系统会自动检测上次更新的内容,提示更新所需的流量,按START开始。更新完毕后,计算机会自动生成一个UPDATE REPORT。保存该文件并打印签字,备查。断开联网,拔出U盘。 2.根据下列步骤导入PERMIT (1)将STICK U盘插入USB接口,在ECDIS界面,上面点击CHARTS,右侧点击License,出现搜索界面点击OK。 (2)选ENC后点击右下角Install license,在出现的菜单中,点击USB Flash/INFO/Navtor/Primit/ECDIS1内的Pemit.txt文件 上,再点击OK。将在ENC下方列表看到有许可的海图。3.海图安装更新步骤 (1)将Stick U盘插入USB接口,在ECDIS界面,上面点击

FURUNO 电子海图 完整题库

1.What does the alert number 820 indicate? A. AIS lost B. TT lost C. Navtex message received D. Cross track alarm 2. What does the alert number 450 indicate? A. Route: Illegal To WPT B. RADAR comm. Error C. LAN adapter version error D. Heading sensor not available 3. What does the alert number 495 indicate? A. Anchor watch error B. Track control stopped C. Steering parameter error D. Filter: Init. 4. What does the alert number 380 indicate? A. Route: File read error B. User chart: File not found C. AIS COM error D. User chart: File read error 5. What does the alert number 635 indicate? A. No official data B. Log error C. Dual axis log (WT) error D. Dual axis log (BT) error 6. What does the alert number 640 indicate? A. Datum mismatch B. Chart align: Over 30 min. C. RADAR antenna ID error D. Gyro error (Trackpilot) 7. What does the alert number 031 indicate? A. Sensor adapter 1 COM timeout B. Sensor adapter 2 COM timeout C. Sensor adapter 3 COM timeout D. Sensor adapter 4 COM timeout 8. What does the alert number 257 indicate? A. Heading sensor not available B. Prg track: Need higher speed C. Prg track: Use radius Ctrl D. Gyro 3 COM error 9. What does the alert number 470 indicate? A. WGS 84 not used B. Different geodetic datum C. Sentence syntax error

NS3000电子海图简明使用手册

NS3000电子海图简明使用手册 字体: 小中大| 打印发表于: 2010-12-14 12:51 作者: landho 来源: 海员联盟 1.通用操作说明 Navi Sailor 3000电子海图系统运行在Windows NT下,符合Windows应用软件的标准,很多操作风格都和其他windows应用软件相似,现加以说明: 1.1 右下角的主菜单的各菜单项,,除”Ahead”,”Review”,”ERBL”,”Zoom”,”Event”,”Info”即前两排菜单外,均为按钮选择型。当点击该菜单项时,海图区的下部则会出现该菜单项的详细窗口,用户可在其中选择具体的操作,这时该菜单项呈白色,表示该按钮已按下。如果要关闭该菜单,可再点击一下即可关闭。若要选择其他菜单项,可直接点击该菜单项,若该菜单为白色,表示您在之前已对该菜单作过操作,并保存着当时的状态。您只需点击屏幕左下角标记该菜单名称的一项,即可切换到该菜单项的具体操作。这样您可同时打开多个菜单,并可在菜单之间切换,方便了用户的操作。 1.2 系统屏幕中快捷按钮: 在海图的右边有一竖排快捷按钮,用户可以在操作电子海图的任何时刻点击快捷按钮进行相应的操作,当把光标移动到按钮上时会有该按钮的操作功能说明。 1.3 UTC和Local Time之间的切换,点击右上角当前时间左边时钟形状的按钮,即可在UTC和Local Time之前切换,并会有相应的提示。UTC和Local Time及时区的设置,是在Config->Time Zone中进行设置。 2.本手册缩略语 NS - NaviSailor 船商NaviSailor系列电子海图系统 App. - Appendix 附录

ECDIS电子海图操作规程

FMD-3100型ECDIS电子海图操作规程 1. 开关机 按电源开关,开机和关机。 2. 选择背景颜色 单击PALAETTE背景)按钮,根据需要选择DAY(白天)、DUSK (黄昏)、NIGHT (夜晚)。再根据需要选择背景颜色。 3. 亮度调整 操作BRILL(亮度)控制钮调整亮度。顺时针转动增加亮度;逆 时针转动降低亮度。 4. 设计航线 点击PLAN^ PLANNIN G ROUTE丁开航线计划对话框,单击 NEV按钮后,使用光标在海图上选择航路点,根据需要在ROUTEPLANI线计划)对话框中输入名称、操舵模式、半径、 计划速度等所有航点完成后点击SAVE(保存)-OK完成。 5. 航线检查 单击CHECKROL开始检查,检查通过后点击SA\E(保存)。 6. 调用航线 在航行模式中,右键单击ROUTE INFORMATIO N线信息), 选择SELECT ROUT睢择航线)单击OPEN (打开)。

在界面中点击ROUTE PL G PLANNING^ ROU E选择所需航 线打开。 AVCS ENC使用指南 使用NAVTOR-AV海图所用的海图安装和更新都可以用个U NAVSTICK这 盘完成,请务必保存好。 1. 互联网更新海图的方法 使安装有NAVTOR NAVSYNC勺电脑,链接到互联网,双击 NAVTOR NAVSYN?标,等待程序联网结束,按提示将NAVSYNC 这个U盘插入到电脑,系统会自动检测上次更新的内容,提示更新所需的流量,按START开始。更新完毕后,计算机会自动生成 一个UPDATE REPO。保存该文件并打印签字,备查。断开联网, 拔出U盘。 2. 根据下列步骤导入PERMIT (1)将STICK U盘插入USB接口,在ECDIS界面,上面点击 CHARTS右侧点击License,出现搜索界面点击OK (2)选ENC后点击右下角Install license,在出现的菜单中,点击 USB Flash/INFO/Navtor/Primit/ECDIS1 内的Pemit.txt 文件上,再点击 OK。将在ENC下方列表看到有许可的海图。 3. 海图安装更新步骤 (1)将Stick U盘插入USB接口,在ECDIS界面,上面点击CHARTS,

电子海图题库

故障代码类: 1.031:sensor adapter2COM timeout 2.257:Gyro3com error 3.380:AIS COM ERROR 4.450:heading sensor not available 5.470:datum change 6.495:anchor watch error 7.635:no official data 8.640:chartalign:over30min 9.820:navtex message received 考点(题中穿插): 1.DISP SETTING(chart watch sector) 2.Basic setting:shallow pattern Chart disp:AIO Symbol disp:magnetic variation Chart alert:shallow contour,safety depth,safety contour, deep contour 3.GREEN:license ok,chart is up-to-date ORANGE:license is valid,but not up-to-date Magenta:license is valid,but not loaded to the ECDIS YELLOW:license ok,up-to-date status doubtful RED:not available or expired

BLUE:canceled chart 单选题(目前72个,未完待续) 1.how do you get information on an ENC object(buoy-beacon-berth etc)on the FURUNO ECDIS? A.I right click on the use chart function in the route planning tool. B.I click on the chart info in the instant access bat C.I enter click on the object. D.I right click on the object 估计答案:D 正确答案: 2.where can you find a list of the manual updates that have been applied to the FURUNO ECDIS? A.in the chart legend B.In the manual update window C.In the chart catalogue D.In the chart display menu 估计答案:B 正确答案: 3.how can you see if a chart object i cteated using manual updates? A.the manual update will be larger than any other chart objects B.It is always shown in red C.It will have a special orange marker

FURUNO电子海图完整题库

1. What does the alert number 820 indicate? A. AIS lost B. TT lost C. Navtex message received D. Cross track alarm 2. What does the alert number 450 indicate? A. Route: Illegal To WPT B. RADAR comm. Error C. LAN adapter version error D. Heading ensor not available 3. What does the alert number 495 indicate? '? Anchor watch error B. Track control stopped C. Steering parameter error D. Filter: I nit. 4. What does the alert number 380 indicate? A. Route: File read error B. User chart: File not found l AIS COM error D. User chart: File read error 5. What does the alert number 635 indicate? A No official data B. Log error C. Dual axis log (WT) error D. Dual axis log (BT) error 6. What does the alert number 640 indicate? A. Datum mismatch Chart align: Over 30 mtrt C. RADAR antenna ID error D. Gyro error (Trackpilot) 7. What does the alert number 031 indicate? A. Sensor adapter 1 COM timeout Sensor adapter 2 COt.1 timeoirt C. Sensor adapter 3 COM timeout D. Sensor adapter 4 COM timeout 8. What does the alert number 257 indicate? A. Heading sensor not available B. Prg track: Need higher speed C. Prg track: Use radius Ctrl Gyro 3 COM error 9. What does the alert number 470 indicate?

ve船舶日常管理制度at

目录安全管理目标 权力和责任 1、执法支队的职责和权利 2、船长的权力和责任 3、船队领导安全管理职责 (1)队长安全管理职责 (2)书记安全管理职责 (3)副队长安全管理职责 4、安全技术科职责 5、执法科职责 6、综合科职责 GZZD—日常管理规则 1、日常安全守则 2、船舶作息制度 3、请销假制度 4、船舶会议制度 5、防污染和卫生管理制度 6、违反劳动纪律处理规定 7、驾驶台管理规则 8、船舶机舱管理规则 9、甲板部交接班制度

10、轮机部交接班制度 11、甲板部轮机部联系制度 12、船员离就职交接制度 13、消防安全管理规定 14、劳保用品穿戴制度GZZD—航行安全管理规定 1、安全航行管理程序 2、甲板部航行值班制度 3、轮机部值班制度 4、锚泊值班制度 5、停泊系泊值班制度 6、巡回检查制度 7、船舶航行值班了望规定 8、雾中航行管理规定 9、靠离码头作业规定 10、冰区安全航行规定 11、大风浪安全航行规定 12、航行计划规则 13、海图作业规则GZZD—作业安全管理规定 1、安全活动日制度 2、消防安全制度

3、防火防爆规则 4、防风防台管理规定 5、防冻防寒安全措施 6、明火作业须知 7、易燃易爆物品管理规定 8、应急操作须知 9、机舱常规作业须知 10、系泊带缆须知 11、高空、舷外、水上作业规定 12、油漆间管理规定 13、电瓶间管理规定 14、船舶应变设施检查保养规定GZZD—机务管理规定 1、船舶维护保养细则 2、船舶适航标准 3、备件物料管理制度 4、船舶厂修、自修质量管理规定 5、船舶档案技术资料管理规定 6、燃、润料管理规定 7、船舶机电设备损坏事故处理办法 8、船舶海损事故处理办法 操作规程

四川省交安三类人员机考模拟真题 题中带有答案(共19套 第15套)

四川省交安三类人员机考模拟真题(共19套第15套) 机考时间120分钟总分100分适用于A、B、C证结合2020年11月四川考试题型排版说明:1、机考120分钟内系统可以无限交卷,建议最多做两次,60分过关; 2、所有模拟真题均摘抄于交安考试题库,虽说有近1500道的真题题库,但四川交安考试过关率很低,其难度不低于注安考试,光看书不练题不起作用,请认真做完19套模拟真题; 3、根据编者考试经验,先做完该模拟考试卷再对答案效果更佳; 4、最后祝您成功通过交安三类人员考试。 一、单项选择题(共28题每题1分) 1.安全系统工程最早起源于(D.航空部门)。 A.经济管理部门 B.交通建设部门 C.道路运输部门 D.航空部门 2.《公路水运工程“平安工地”考核评价标准(试行)》规定,“平安工地”考评等级分为达标、不达标与(A.示范)三个等级。 A.示范 B.优秀 C.优良创建 3.亚当斯的事故致因理论里把人的不安全行为与物的不安全状态称为(A)。 A.现场失误 B.操作失误 C.管理失误 D.判断失误 4.危险源辨识的第一个步骤是(A) A.划分作业活动 B.危险源辨识 C.风险评价 D.判断风险是否容许 5.违反法律规定,应当承担民事赔偿责任和缴纳罚款、罚金,其财产不足以同时支付时,先承担(B)。 A.行政赔偿责任 B.民事赔偿责任 C.刑事赔偿责任 D.国家赔偿责任

6.特种设备进行(D),按照规定需要变更使用登记的,应当办理变更登记,方可继续使用。 A.报废 B.出租 C.转让 D.改造修理 7.用人单位应当为劳动者创造符合(D)职业卫生标准和卫生要求的工作环境和条件,并采取措施保障劳动者获得职业卫生保护。 A.行业 B.企业 C.地方 D.国家 8.用人单位制定或者修改有关职业病防治的规章制度,应当听取(D)的意见。 A.劳动部门 B.安监部门 C.职工 D.工会组织 9.违反安全生产法律、法规、标准、制度和规定的作业属于(B)。 A.违章指挥 B.违章作业 C.主动性不安全行为 D.被动性不安全行为 10.以下不属于第一类危险源的控制方法的是(C)。 A.隔离 B.限制能量 C.提高可靠性 D.限制危险物质 11.模板作业向基坑内吊送材料和工具时,错误的做法是(C)。 A.设溜槽 B.绳索系放 C.小弧度抛掷【不得抛掷】 D.机械吊送设专人指挥 12.支架施工时,错误的做法是(B)。 A.支立排架以整排竖立为宜 B.支立排架时,支架应与便桥或脚手架相连,提高支架整体稳定性【不得与】 C.用吊机竖立排架时,应用溜绳控制排架起吊时的摆动 D.浇筑混凝土前应对支架进行预压试验,消除非弹性变形 13.支架预压施工的目的是(B)。 A.消除支架的弹性变形

船载电子海图系统(ECS)操作规程

船载电子海图系统(ECS)操作规程 一、安装 1、主机安装 AWENA-1主机安装应考虑如下因素: 主机应垂直或水平安装于坚固的墙壁或支架上。 主机所处环境湿度应该在-15℃~55℃范围内,且无剧烈变化,湿度10%~90%。 安装位置应远离强烈源。 避免在具有强盐雾的区域安装。 保证足够的通风以利散热。 与磁敏感传感器(例如磁罗经)的距离不低于1米。 安装位置应该留有足够的操作空间。 2、电源线连接 主机电源线:AWENA—1型船载电子海图系统主机采24VDC供电,连接时注意电源正负极性,红色线接电源正极,黑色线接电源负极。电源允许波动范围10—32VDC。专用电源线接入主机后的POWER插座,注意:电缆绝对不允许接入22V交流电网。 3、GPS天线安装 AWENA-1船载电子海图系统GPS天线安装应考虑如下因素: 为保证GPS天线具有良好的天空观察,应保证在天

线四周360度、仰角(相对于水平面)5-90度范围内无连续障碍物。 应保持与雷达等高功率发射机的发射波束的距离不小于3m。 4、其它电缆的连接 主机数据线:AWENA-1型船载电子海图系统主机数据线彩分叉连接线,用户可以把其它符合RS-422规范的设备直接连接到COM1-COM8,也可以把其它符合RS-232规范的设备直接连接到COM1-COM4。连接时,采用附件中的五芯接线端子。 键盘/鼠标线:将键盘/鼠标的USB线的插头直接插入主机背面或前面的USB插座中,可以造用几个USB中的任意一个。 二、船载电子海图系统操作 1、系统优化功能 系统启动 开启电源 在确认正确连接所有线缆后,按下主机前面板上的电源按钮“POWER”,主机工作灯后,主机开始进入工作状态。 启动界面 系统采用快速启动方式,最大限度减少用户等待时

ECDIS电子海图操作规程

FMD-3100型ECDIS电子海图操作规程1.开关机 按电源开关,开机和关机。 2.选择背景颜色 单击PALAETTE(背景)按钮,根据需要选择DAY(白天)、DUSK (黄昏)、NIGHT(夜晚)。再根据需要选择背景颜色。 3.亮度调整 操作BRILL(亮度)控制钮调整亮度。顺时针转动增加亮度;逆时针转动降低亮度。 4.设计航线 点击PLAN→PLANNING→ROUTE,打开航线计划对话框,单击NEW按钮后,使用光标在海图上选择航路点,根据需要在ROUTE PLAN(航线计划)对话框中输入名称、操舵模式、半径、计划速度等所有航点完成后点击SAVE(保存)→OK完成。 5.航线检查 单击CHECK ROUTE开始检查,检查通过后点击SAVE(保存)。 6.调用航线 在航行模式中,右键单击ROUTE INFORMATION(航线信息),选择SELECT ROUTE(选择航线)单击OPEN(打开)。 在界面中点击ROUTE PLAN→PLANNING→ROUTE→选择所需航线打开。

AVCS ENC 使用指南 使用NAVTOR-AVCS海图所用的海图安装和更新都可以用NAVSTICK这个U盘完成,请务必保存好。 1.互联网更新海图的方法 使安装有NAVTOR NAVSYNC 的电脑,链接到互联网,双击NAVTOR NAVSYNC图标,等待程序联网结束,按提示将NAVSYNC 这个U盘插入到电脑,系统会自动检测上次更新的内容,提示更新所需的流量,按START开始。更新完毕后,计算机会自动生成一个UPDATE REPORT。保存该文件并打印签字,备查。断开联网,拔出U盘。 2.根据下列步骤导入PERMIT (1)将STICK U盘插入USB接口,在ECDIS界面,上面点击CHARTS,右侧点击License,出现搜索界面点击OK。 (2)选ENC后点击右下角Install license,在出现的菜单中,点击USB Flash/INFO/Navtor/Primit/ECDIS1内的Pemit.txt文件上, 再点击OK。将在ENC下方列表看到有许可的海图。 3.海图安装更新步骤 (1)将Stick U盘插入USB接口,在ECDIS界面,上面点击CHARTS,右侧点击AUTO load,出现搜索界面点击OK,提示无法找到 的话,需要手动将安装路径设定为U盘ENC-ROOT后继续。 (2)将会提示找到ENC海图多少张,点击OK确认继续安装。 (3)等到100%安装完毕后退出即可。 安装AIO的话,同上将安装路径设置为U盘路径/INFO/AIO/ENC-ROOT后继续即可。

相关主题
相关文档 最新文档